/
board.txt
55 lines (44 loc) · 1.85 KB
/
board.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
// Board Hardware configuration file for Fly Super8
// generated by RepRapFirmware Configuration Tool (LPC Version) v3.3.1-LPC-STM32+7
// on Thu May 12 2022 18:02:18 GMT+0800 (中国标准时间)
//Note: Each line should be less than 120 characters.
// : Unwanted options can be commented out or set to NoPin. Lines commented out will get default values
// : for pins the default is NoPin.
// : Values for Arrays need to be contained within { and }
// : Comments can be defined with // or # (comments are not supported inside arrays)
// : Each config entry must be all on a single line.
board = biqoctopuspro_1.0;
//LED blinks to indicate Platform is spinning or other diagnostic
//Comment out or set to NoPin if not wanted.
led.neopixelPin = D.14
heat.tempSensePins = {bedtemp,e0temp}; //Max of 3 entries
//heat.spiTempSensorCSPins = { }; //Max of 2 entries
//ESP Settings
8266wifi.espDataReadyPin = D.0;
8266wifi.TfrReadyPin = D.3;
8266wifi.espResetPin = G.14;
//ESP RX/TX Settings
8266wifi.serialRxTxPins = { PD_6, PD_5 } ;
8266wifi.csPin = A.15;
8266wifi.spiChannel = 2
//TMC Smart Drivers
stepper.numSmartDrivers = 7;
stepper.enablePins = {PA_1, PC_1, PC_5, PE_10, PE_15, PF_12, PG_1} // enablePins
stepper.stepPins = {PA_3, PC_2, PB_0, PE_11, PB_10, PF_13, PE_7} // stepPins
stepper.directionPins = {PA_4, PC_3, PB_1, PE_12, PB_11, PF_14, PE_8} // dirPins
stepper.TmcUartPins = {PA_2, PC_0, PC_4, PE_9, PE_14, PF_11, PG_0} // uartpins
// External Display settings
serial.aux.rxTxPins = {PA_10, PA_9};
//MINI 12864
lcd.encoderPinA=D.10
lcd.encoderPinB=D.9
lcd.encoderPinSw=G.4
lcd.lcdCSPin=G.3
lcd.lcdDCPin=G.2
lcd.spiChannel=5
SPI5.pins = {PB_13, PB_14, PB_15}
lcd.lcdBeepPin=G.5
heat.spiTempSensorCSPins = {PF_8, NoPin, NoPin, NoPin, NoPin, NoPin, NoPin, NoPin}
sdCard.external.spiChannel=5
sdCard.external.csPin=B.12
sdCard.external.cardDetectPin=D.8