This repository has been archived by the owner on Aug 27, 2023. It is now read-only.
/
usb_serial.h
124 lines (109 loc) · 4.08 KB
/
usb_serial.h
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
#ifndef usb_serial_h__
#define usb_serial_h__
#include <stdint.h>
// setup
void usb_init(void); // initialize everything
uint8_t usb_configured(void); // is the USB port configured
// receiving data
int16_t usb_serial_getchar(void); // receive a character (-1 if timeout/error)
uint8_t usb_serial_available(void); // number of bytes in receive buffer
void usb_serial_flush_input(void); // discard any buffered input
// transmitting data
int8_t usb_serial_putchar(uint8_t c); // transmit a character
int8_t usb_serial_putchar_nowait(uint8_t c); // transmit a character, do not wait
int8_t usb_serial_write(const uint8_t *buffer, uint16_t size); // transmit a buffer
void usb_serial_flush_output(void); // immediately transmit any buffered output
// serial parameters
uint32_t usb_serial_get_baud(void); // get the baud rate
uint8_t usb_serial_get_stopbits(void); // get the number of stop bits
uint8_t usb_serial_get_paritytype(void);// get the parity type
uint8_t usb_serial_get_numbits(void); // get the number of data bits
uint8_t usb_serial_get_control(void); // get the RTS and DTR signal state
int8_t usb_serial_set_control(uint8_t signals); // set DSR, DCD, RI, etc
// constants corresponding to the various serial parameters
#define USB_SERIAL_DTR 0x01
#define USB_SERIAL_RTS 0x02
#define USB_SERIAL_1_STOP 0
#define USB_SERIAL_1_5_STOP 1
#define USB_SERIAL_2_STOP 2
#define USB_SERIAL_PARITY_NONE 0
#define USB_SERIAL_PARITY_ODD 1
#define USB_SERIAL_PARITY_EVEN 2
#define USB_SERIAL_PARITY_MARK 3
#define USB_SERIAL_PARITY_SPACE 4
#define USB_SERIAL_DCD 0x01
#define USB_SERIAL_DSR 0x02
#define USB_SERIAL_BREAK 0x04
#define USB_SERIAL_RI 0x08
#define USB_SERIAL_FRAME_ERR 0x10
#define USB_SERIAL_PARITY_ERR 0x20
#define USB_SERIAL_OVERRUN_ERR 0x40
// This file does not include the HID debug functions, so these empty
// macros replace them with nothing, so users can compile code that
// has calls to these functions.
#define usb_debug_putchar(c)
#define usb_debug_flush_output()
// Everything below this point is only intended for usb_serial.c
#ifdef USB_SERIAL_PRIVATE_INCLUDE
#include <avr/io.h>
#include <avr/pgmspace.h>
#include <avr/interrupt.h>
#define EP_TYPE_CONTROL 0x00
#define EP_TYPE_BULK_IN 0x81
#define EP_TYPE_BULK_OUT 0x80
#define EP_TYPE_INTERRUPT_IN 0xC1
#define EP_TYPE_INTERRUPT_OUT 0xC0
#define EP_TYPE_ISOCHRONOUS_IN 0x41
#define EP_TYPE_ISOCHRONOUS_OUT 0x40
#define EP_SINGLE_BUFFER 0x02
#define EP_DOUBLE_BUFFER 0x06
#define EP_SIZE(s) ((s) == 64 ? 0x30 : \
((s) == 32 ? 0x20 : \
((s) == 16 ? 0x10 : \
0x00)))
#define MAX_ENDPOINT 4
#define LSB(n) (n & 255)
#define MSB(n) ((n >> 8) & 255)
#if defined(__AVR_AT90USB162__)
#define HW_CONFIG()
#define PLL_CONFIG() (PLLCSR = ((1<<PLLE)|(1<<PLLP0)))
#define USB_CONFIG() (USBCON = (1<<USBE))
#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
#elif defined(__AVR_ATmega32U4__)
#define HW_CONFIG() (UHWCON = 0x01)
#define PLL_CONFIG() (PLLCSR = 0x12)
#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
#elif defined(__AVR_AT90USB646__)
#define HW_CONFIG() (UHWCON = 0x81)
#define PLL_CONFIG() (PLLCSR = 0x1A)
#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
#elif defined(__AVR_AT90USB1286__)
#define HW_CONFIG() (UHWCON = 0x81)
#define PLL_CONFIG() (PLLCSR = 0x16)
#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
#endif
// standard control endpoint request types
#define GET_STATUS 0
#define CLEAR_FEATURE 1
#define SET_FEATURE 3
#define SET_ADDRESS 5
#define GET_DESCRIPTOR 6
#define GET_CONFIGURATION 8
#define SET_CONFIGURATION 9
#define GET_INTERFACE 10
#define SET_INTERFACE 11
// HID (human interface device)
#define HID_GET_REPORT 1
#define HID_GET_PROTOCOL 3
#define HID_SET_REPORT 9
#define HID_SET_IDLE 10
#define HID_SET_PROTOCOL 11
// CDC (communication class device)
#define CDC_SET_LINE_CODING 0x20
#define CDC_GET_LINE_CODING 0x21
#define CDC_SET_CONTROL_LINE_STATE 0x22
#endif
#endif