flexplate.cfg

#####################################################################
#  Preperation 
#####################################################################
# copy this file in the same directory as your printer.cfg
# add 
#    [include flexplate.cfg]
# to your printer.cfg
#
# add
#    _SET_PLATE_OFFSET
# to your print start gcode to apply the offset before you print the first line of filament 
#
# A [save_variables] block is needed since a printer save variable needs to be used to have it available after power up.
# You can skip this if you already have an [save_variables] config block
# e.g: 
#    [save_variables]
#    filename: /home/pi/klipper_config/.variables.stb
# I like to hide that file as there is nothing in that should be modified by the user.
# Do a klipper restart after adding the stuff above
#
# After klipper is back you need define your first plate e.g.
#    ADD_NEW_PLATE NAME=Texture OFFSET=-0.010
#
#####################################################################
#  Macro for the print_start gcode section of your slicer 
#  or your print start macro
#####################################################################
# _SET_PLATE_OFFSET [MOVE=0|1] : Set the z offset
# Set the offset of the active flexplate as an Z_ADJUST offset. MOVE=0 (default) 
# will add the offset with the next z move, MOVE=1 imitate change the z offset.
#
# !!! Caution: Insure that SET_GCODE_OFFSET Z=0 is set once at every 
# print start. Please read also the desribtion of the gcode SET_GCODE_OFFSET
# at https://www.klipper3d.org/G-Codes.html#extended-g-code-commands !!!
#
#####################################################################
#  Console ussage
#####################################################################
# LIST_PLATES: List all plates
# Use the index shown there for all other macros
#
# SET_PLATE INDEX=<index>: Set the active flexplate
# The flexplate stored at index will be activated.
#
# ADD_PLATE [NAME=<name>] [OFFSET=<offset>]: Add a new flexplate to the list
# If NAME or OFFSET is not defined than the defaults 'New' and 0.000 will be used.
# !!! Caution do not use special characters like äüö or anything else in the name !!!
#
# REMOVE_PLATE INDEX=<index>: Remove a flexplate of the list
# Remove plate with INDEX from the list. Note the last or active plate can not be removed.
#
# CHANGE_PLATE_VALUE [INDEX=<index>] [NAME=<name>] [OFFSET=<offset>]: Change name or/and offset of an flexplate
# If INDEX is not defined the name and/or offset value of the active plate will be changed.
# !!! Caution do not use special characters like äüö or anything else in the name !!!
#
#####################################################################
#  LCD menu usage
#####################################################################
# Change the active flexplate and the offset of that flexplate.
#
#####################################################################
#  Get offset_z and name for own usage
#####################################################################
# {% set offset = printer.save_variables.variables.plates.array[printer.save_variables.variables.plates.index].offset %}
# {% set name   = printer.save_variables.variables.plates.array[printer.save_variables.variables.plates.index].name %}
#
#####################################################################
[gcode_macro _SET_PLATE_OFFSET]
description: Helper: Apply the z-offset of the active flexplate
gcode:
  {% if not printer.save_variables.variables.plates %}
    {action_respond_info("FLEXPLATE: No Plate Array defined. ABORDED")}
  {% else %}
    {% set plates = printer.save_variables.variables.plates %}
    SET_GCODE_OFFSET Z_ADJUST={plates.array[plates.index].offset} MOVE={params.MOVE|default(0)}
  {% endif %}

[gcode_macro LIST_PLATES]
description: List all flexplates
gcode:
  {% if not printer.save_variables.variables.plates %}
    {action_respond_info("FLEXPLATE: No Plate Array defined. ABORDED")}
  {% else %}
    {% set plates = printer.save_variables.variables.plates %}
    {% set out = ["FLEXPLATE: Defined Plates"] %}
    {% for elem in range(plates.array|length) %}
      {% set _dummy = out.append("INDEX: %d -> %s -> offset: %.3fmm" % 
                      (elem, plates.array[elem].name, plates.array[elem].offset)) %}
    {% endfor %}
    {% set  _dummy = out.append("\n Active Plate: %s" % plates.array[plates.index].name) %}
    {action_respond_info(out|join("\n"))}
  {% endif %}

[gcode_macro SET_PLATE]
description: Set an flexplate
gcode:
  {% if not printer.save_variables.variables.plates %}
    {action_respond_info("FLEXPLATE: No Plate Array defined. ABORDED")}
  {% else %}
    {% set plates = printer.save_variables.variables.plates %}
    {% if 'INDEX' not in params|upper %}
      {action_respond_info("FLEXPLATE: No INDEX defined, use SET_PLATE INDEX=index. ABORDED")}
    {% elif params.INDEX|int < 0 or params.INDEX|int >= plates.array|length %}
      {action_respond_info("FLEXPLATE: Index out of range [0..%d]. ABORDED" % (plates.array|length-1))}
    {% else %}
      {% set _dummy = plates.update({'index' : params.INDEX|int}) %}
      SAVE_VARIABLE VARIABLE=plates VALUE="{plates}"
      M117 Plate: {plates.array[plates.index].name}
      {action_respond_info("FLEXPLATE: Set plate: %s with offset: %.3fmm" % (
        plates.array[plates.index].name,plates.array[plates.index].offset))}
      UPDATE_DELAYED_GCODE ID=_CLEAR_DISPLAY DURATION=10
    {% endif %}
  {% endif %}

[gcode_macro ADD_PLATE]
description: Add a flexplate to the list
gcode:
  {% set name = params.NAME|default('New')|string %}
  {% set offset = params.OFFSET|default(0.0)|float|round(3) %}
  {% if not printer.save_variables.variables.plates %}
    {action_respond_info("FLEXPLATE: Initialize Plate Array
                          Add plate: %s with offset: %.3fmm at INDEX: 0" % (name,offset))}
    {% set plates = {'array': [{'name': name, 'offset': offset}], 'index' : 0} %}
  {% else %}
    {% set plates = printer.save_variables.variables.plates %}
    {action_respond_info("FLEXPLATE: Add plate: %s with offset: %.3fmm at INDEX: %d" % (name,offset,plates.array|length))}
    {% set _dummy = plates.array.append({'name': name, 'offset': offset}) %}
  {% endif %}
  SAVE_VARIABLE VARIABLE=plates VALUE="{plates}"

[gcode_macro REMOVE_PLATE]
description: Remove a flexplate from the list
gcode:
  {% if not printer.save_variables.variables.plates %}
    {action_respond_info("FLEXPLATE: No Plate Array defined. ABORDED")}
  {% else %}
    {% set plates = printer.save_variables.variables.plates %}
    {% if 'INDEX' not in params|upper %}
      {action_respond_info("FLEXPLATE: No INDEX defined, use REMOVE_PLATE INDEX=index. ABORDED")}
    {% elif plates.array|length == 1 or params.INDEX|int == plates.index %}
      {action_respond_info("FLEXPLATE: Last or active plate can not be removed. ABORDED")}
    {% elif params.INDEX|int < 0 or params.INDEX|int >= plates.array|length %}
      {action_respond_info("FLEXPLATE: Index out of range [0..%d]. ABORDED" % (plates.array|length-1))}
    {% else %}
      {action_respond_info("FLEXPLATE: Remove plate with INDEX %d from list " % params.INDEX|int)}
      {% set _dummy = plates.array.pop(params.INDEX|int) %}
      SAVE_VARIABLE VARIABLE=plates VALUE="{plates}"
    {% endif %}
  {% endif %}

[gcode_macro CHANGE_PLATE_VALUE]
description: Change name or offset of an flexplate in the list
gcode:
  {% if not printer.save_variables.variables.plates %}
    {action_respond_info("FLEXPLATE: No Plate Array defined. ABORDED")}
  {% else %}
    {% set plates = printer.save_variables.variables.plates %}
    {% set index = params.INDEX|default(plates.index)|int %}
    {% if index < 0 or index >= plates.array|length %}
      {action_respond_info("FLEXPLATE: Index out of range [0..%d]. ABORDED" % (plates.array|length-1))}
    {% else %}
      {% set change_txt = [] %}
      {% if 'NAME' in params|upper %}
        {% set _dummy = change_txt.append("name to %s" % params.NAME|string) %}
        {% set _dummy = plates.array[index].update({'name': params.NAME|string}) %}
      {% endif %}
      {% if 'OFFSET' in params|upper %}
        {% set _dummy = change_txt.append("offset to %.3fmm" % params.OFFSET|float|round(3)) %}
        {% set _dummy = plates.array[index].update({'offset': params.OFFSET|float|round(3)}) %}
      {% endif %}
      {% if change_txt|length > 0 %}
        {action_respond_info("FLEXPLATE: Changed %s at plate with INDEX %d" % (change_txt|join(" and "),index))}
        SAVE_VARIABLE VARIABLE=plates VALUE="{plates}"
      {% else %}
        {action_respond_info("FLEXPLATE: Nothing changed at plate with INDEX %d" % index)}
      {% endif %}
    {% endif %}
  {% endif %}

# Display Menu
# !!! Caution: I use my own menu root __voron_main !!!
# If you use a stock menu un comment this here
#[menu __main __flexplate]
#type: list
#name: Flexplate: {printer.save_variables.variables.plates.array[printer.save_variables.variables.plates.index].name} 
#enable: {'plates' in printer.save_variables.variables}
#index: 1

#[menu __main __flexplate __set]
#type: input
#name:  Set: {printer.save_variables.variables.plates.array[menu.input|int].name}
#enable: {printer.print_stats.state != "printing" and printer.print_stats.state != "paused"}
#input: {printer.save_variables.variables.plates.index}
#input_min: 0
#input_max: {printer.save_variables.variables.plates.array|length - 1}
#gcode:
#  {%- if menu.event == 'long_click' -%}
#    SET_PLATE INDEX={menu.input|int}
#  {%- endif -%}

#[menu __main __flexplate __offset]
#type: input
#name:  Offset:{'%01.3f' % menu.input}
#enable: {printer.print_stats.state != "printing" and printer.print_stats.state != "paused"}
#input: {printer.save_variables.variables.plates.array[printer.save_variables.variables.plates.index].offset}
#input_min: -1.0
#input_max: 1.0
#input_step: 0.001
#gcode:
#  {%- if menu.event == 'long_click' -%}
#    CHANGE_PLATE_VALUE OFFSET={menu.input|float}
#  {%- endif -%}