sc8180x-samsung-np545.dts

// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2022, The Linux Foundation. All rights reserved.
 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sc8180x.dtsi"
#include "sc8180x-pmics.dtsi"

/ {
	model = "Samsung Galaxy Book Go 5G";
	compatible = "samsung,np545", "qcom,sc8180x";
	chassis-type = "laptop";

	aliases {
		serial0 = &uart13;
	};

	chosen { };

	reserved-memory {
		// Sources for memory regions:
		// - Windows Device Manager/ACPI
		// - Windows Registry/driver .inf files

		// Windows Registry entries:
		//
		// - ADSP:
		//   - ADSP:
		//   - alignment:    0x00100000
		//   - reservation:  0x02200000
		//
		// - CDSP:
		//   - alignment:    0x00100000
		//   - reservation:  0x00800000
		//
		// - GFXSUC:
		//   - alignment:    0x00001000
		//   - reservation:  0x00005000
		//
		// - IPA (no firmware?):
		//   - alignment:    0x00100000
		//   - reservation:  0x00100000
		//
		// - MBA (bogus?):
		//   - alignment:    0x00100000
		//
		// - MPSS/MODEM:
		//   - address:      0x8d800000
		//   - alignment:    0x00400000
		//   - reservation:  0x03000000
		//
		// - SCSS/SLPI:
		//   - alignment:    0x00100000
		//   - reservation:  0x01400000
		//
		// - SPSS (no firmware?):
		//   - alignment:    0x00100000
		//   - reservation:  0x00100000
		//
		// - VENUS (bogus?):
		//   - alignment:           0x0
		//   - reservation:  0x00500000
		//
		// - WCNSS (bogus?):
		//   - alignment:    0x00100000
		//   - reservation:         0x0

		// Windows Device Manager memory map:
		//
		// [...]
		// 0x85d00000 ++   0x200000	RMTFS
		// 0x85f00000 ++ 0x14600000	<free>
		// 0x9a500000 ++   0x600000	QSM
		// [...]

		// Resulting memory map:
		//
		// [...]
		// 0x85500000 ++  0x200000	RMTFS
		// 0x85700000 ++ 0x6500000	<free>
		// 0x8bc00000 ++  0x800000	WLAN
		// 0x8c400000 ++ 0x1400000	<free>
		// 0x8d800000 ++ 0x3000000	MPSS
		// 0x90800000 ++ 0x2200000	ADSP
		// 0x92a00000 ++  0x800000	CDSP
		// 0x93200000 ++ 0x1400000	SCSS
		// 0x94600000 ++    0x5000	GFXSUC
		// 0x94605000 ++ 0x5efb000	<free>
		// 0x9a500000 ++  0x600000	QSM
		// [...]
		/* Note: rmtfs region in ACPI/Windows starts from 0x85d00000 */

		rmtfs_mem: memory@85500000 {
			compatible = "qcom,rmtfs-mem";
			reg = <0x0 0x85500000 0x0 0x200000>;
			no-map;

			qcom,client-id = <1>;
			qcom,vmid = <15>;
		};

		wlan_mem: memory@8bc00000 {
			reg = <0x0 0x8bc00000 0x0 0x800000>;
			no-map;
		};

		mpss_mem: memory@8d800000 {
			reg = <0x0 0x8d800000 0x0 0x3000000>;
			no-map;
		};

		adsp_mem: memory@90800000 {
			reg = <0x0 0x90800000 0x0 0x2200000>;
			no-map;
		};

		cdsp_mem: memory@92a00000 {
			reg = <0x0 0x92a00000 0x0 0x800000>;
			no-map;
		};

		scss_mem: memory@93200000 {
			reg = <0x0 0x93200000 0x0 0x1400000>;
			no-map;
		};

		gfxsuc_mem: memory@94600000 {
			reg = <0x0 0x94600000 0x0 0x5000>;
			no-map;
		};
	};

	pmic-glink {
		compatible = "qcom,sc8180x-pmic-glink", "qcom,pmic-glink";

		#address-cells = <1>;
		#size-cells = <0>;

		connector@0 {
			compatible = "usb-c-connector";
			reg = <0>;
			power-role = "dual";
			data-role = "dual";
		};

		connector@1 {
			compatible = "usb-c-connector";
			reg = <1>;
			power-role = "dual";
			data-role = "dual";
		};
	};

	vph_pwr: vph-pwr-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vph_pwr";
		regulator-min-microvolt = <3700000>;
		regulator-max-microvolt = <3700000>;
	};

	vreg_s4a_1p8: pm8150-s4 {
		compatible = "regulator-fixed";
		regulator-name = "vreg_s4a_1p8";

		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;

		regulator-always-on;
		regulator-boot-on;

		vin-supply = <&vph_pwr>;
	};
};

&apps_rsc {
	pmc8180-a-rpmh-regulators {
		compatible = "qcom,pmc8180-rpmh-regulators";
		qcom,pmic-id = "a";

		vdd-s5-supply = <&vph_pwr>;
		vdd-l1-l8-l11-supply = <&vreg_s6c_1p35>;
		vdd-l2-l10-supply = <&vreg_bob>;
		vdd-l3-l4-l5-l18 = <&vreg_s7c_0p95>;
		vdd-l6-l9-supply = <&vreg_s6c_1p35>;
		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p95>;
		vdd-l13-l16-l17-supply = <&vreg_bob>;

		/* Failed to get the current voltage (-ENOTRECOVERABLE) */
		vreg_s5a_1p95: smps5 {
			//regulator-min-microvolt = <1950000>;
			//regulator-max-microvolt = <1950000>;
		};

		/* Failed to set initial mode (-ETIMEDOUT) */
		vreg_l1a_1p2: ldo1 {
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			//regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Failed to get the current voltage (-ENOTRECOVERABLE) */
		/* Failed to set initial mode (-ETIMEDOUT) */
		vreg_l2a_2p85: ldo2 {
			//regulator-min-microvolt = <2850000>;
			//regulator-max-microvolt = <2850000>;
			//regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_l3a: ldo3 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_l5a: ldo5 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l6a_1p2: ldo6 {
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7a_1p8: ldo7 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9a_1p3: ldo9 {
			regulator-min-microvolt = <1304000>;
			regulator-max-microvolt = <1304000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Failed to set initial mode (-ETIMEDOUT) */
		vreg_l10a_3p0: ldo10 {
			regulator-min-microvolt = <2850000>;
			regulator-max-microvolt = <3000000>;
			//regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_l11a: ldo11 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l12a_1p8: ldo12 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_l13a: ldo13 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Failed to set initial mode (-ETIMEDOUT) */
		vreg_l14a_1p8: ldo14 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			//regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_l15a: ldo15 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_l16a: ldo16 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Failed to get the current voltage (-ENOTRECOVERABLE) */
		/* Failed to set initial mode (-ETIMEDOUT) */
		vreg_l17a_2p85: ldo17 {
			//regulator-min-microvolt = <2850000>;
			//regulator-max-microvolt = <2850000>;
			//regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_l18a: ldo18 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};

	pmc8180-e-rpmh-regulators {
		compatible = "qcom,pmc8180-rpmh-regulators";
		qcom,pmic-id = "e";

		vdd-s4-supply = <&vph_pwr>;
		vdd-s5-supply = <&vph_pwr>;
		vdd-l1-l8-l11-supply = <&vreg_s4e>;
		vdd-l2-l10-supply = <&vreg_bob>;
		vdd-l3-l4-l5-l18-supply = <&vreg_s4e>;
		vdd-l6-l9-supply = <&vreg_s4e>;
		vdd-l7-l12-l14-l15-supply = <&vreg_s5e>;
		vdd-l13-l16-l17-supply = <&vreg_bob>;

		/* Voltage constraints are not in ACPI */
		vreg_s4e: smps4 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_s5e: smps5 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l1e_0p75: ldo1 {
			regulator-min-microvolt = <752000>;
			regulator-max-microvolt = <752000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_l2e: ldo2 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_l4e: ldo4 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l5e_0p88: ldo5 {
			regulator-min-microvolt = <880000>;
			regulator-max-microvolt = <880000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7e_1p8: ldo7 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_l8e: ldo8 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9e_0p88: ldo9 {
			regulator-min-microvolt = <880000>;
			regulator-max-microvolt = <912000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l10e_2p9: ldo10 {
			regulator-min-microvolt = <2504000>;
			regulator-max-microvolt = <2904000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_l12e: ldo12 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_l13e: ldo13 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_l14e: ldo14 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l15e_1p8: ldo15 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l16e_3p0: ldo16 {
			regulator-min-microvolt = <3072000>;
			regulator-max-microvolt = <3072000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l17e_2p9: ldo17 {
			regulator-min-microvolt = <2960000>;
			regulator-max-microvolt = <2960000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};

	pmc8180c-rpmh-regulators {
		compatible = "qcom,pmc8180c-rpmh-regulators";
		qcom,pmic-id = "c";

		vdd-s6-supply = <&vph_pwr>;
		vdd-s7-supply = <&vph_pwr>;
		vdd-s8-supply = <&vph_pwr>;
		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
		vdd-l2-l3-supply = <&vreg_s6c_1p35>;
		vdd-l4-l5-l6-supply = <&vreg_bob>;
		vdd-l7-l11-supply = <&vreg_bob>;
		vdd-l9-l10 = <&vreg_bob>;
		vdd-bob-supply = <&vph_pwr>;

		/* Failed to get the current voltage (-ENOTRECOVERABLE) */
		vreg_s6c_1p35: smps6 {
			//regulator-min-microvolt = <1350000>;
			//regulator-max-microvolt = <1350000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Failed to get the current voltage (-ENOTRECOVERABLE) */
		vreg_s7c_0p95: smps7 {
			//regulator-min-microvolt = <950000>;
			//regulator-max-microvolt = <950000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s8c_1p8: smps8 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_l1c: ldo1 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2c_1p2: ldo2 {
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l3c_1p2: ldo3 {
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_l4c: ldo4 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l6c_2p9: ldo6 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <2950000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7c_3p0: ldo7 {
			regulator-min-microvolt = <3000000>;
			regulator-max-microvolt = <3000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l8c_1p8: ldo8 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9c_2p9: ldo9 {
			regulator-min-microvolt = <2504000>;
			regulator-max-microvolt = <2904000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_l10c: ldo10 {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l11c_3p3: ldo11 {
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3312000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		/* Voltage constraints are not in ACPI */
		vreg_bob: bob {
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};
};

&dispcc {
	status = "okay";
};

&gpu {
	status = "okay";

	zap-shader {
		memory-region = <&gfxsuc_mem>;
		firmware-name = "qcom/samsung/np545/qcdxkmsuc8180.mbn";
	};
};

&i2c0 {
	status = "okay";
	clock-frequency = <400000>;

	pinctrl-names = "default";
	pinctrl-0 = <&i2c0_active>;

	touchpad@40 {
		compatible = "hid-over-i2c";
		reg = <0x40>;
		hid-descr-addr = <0xe>;

		interrupts-extended = <&tlmm 17 IRQ_TYPE_LEVEL_LOW>;

		pinctrl-names = "default";
		pinctrl-0 = <&tp_int_active_state>;

		vdd-supply = <&vreg_l11c_3p3>;

		wakeup-source;
	};
};

&i2c1 {
	status = "okay";
	clock-frequency = <400000>;

	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_active>;

	// Samsung EC @ 0x62
};

&i2c8 {
	status = "okay";
	clock-frequency = <400000>;

	pinctrl-names = "default";
	pinctrl-0 = <&i2c8_active>;

	keyboard@5 {
		compatible = "hid-over-i2c";
		reg = <0x05>;
		hid-descr-addr = <0x20>;

		interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;

		pinctrl-names = "default";
		pinctrl-0 = <&kb_int_active_state>;

		wakeup-source;
	};
};

&mdss {
	status = "okay";
};

&mdss_edp {
	status = "okay";

	data-lanes = <0 1 2 3>;

	aux-bus {
		panel {
			compatible = "edp-panel";
			no-hpd;

			ports {
				port {
					panel_in: endpoint {
						remote-endpoint = <&mdss_edp_out>;
					};
				};
			};
		};
	};

	ports {
		port@1 {
			reg = <1>;
			mdss_edp_out: endpoint {
				remote-endpoint = <&panel_in>;
			};
		};
	};
};

/*&pcie0 {
	status = "okay";

	perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>;
	wake-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&pcie0_default_state>;
};

&pcie0_phy {
	status = "okay";

	vdda-phy-supply = <&vreg_l5e_0p88>;
	vdda-pll-supply = <&vreg_l3c_1p2>;
};*/

&pcie3 {
	status = "okay";

	perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>;
	wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&pcie3_default_state>;
};

&pcie3_phy {
	status = "okay";

	vdda-phy-supply = <&vreg_l5e_0p88>;
	vdda-pll-supply = <&vreg_l3c_1p2>;
};

&pmc8180c_lpg {
	status = "okay";
};

&qupv3_id_0 {
	status = "okay";
};

&qupv3_id_1 {
	status = "okay";
};

&qupv3_id_2 {
	status = "okay";
};

&remoteproc_adsp {
	status = "okay";
	memory-region = <&adsp_mem>;
	firmware-name = "qcom/samsung/np545/qcadsp8180.mbn";
};

&remoteproc_cdsp {
	status = "okay";

	memory-region = <&cdsp_mem>;
	firmware-name = "qcom/samsung/np545/qccdsp8180.mbn";
};

&remoteproc_mpss {
	status = "okay";

	memory-region = <&mpss_mem>;
	firmware-name = "qcom/samsung/np545/qcmpss8180.mbn";
};

&spi3 {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&spi3_active>;
};

&spmi_bus {
	pmic@2 {
		status = "disabled";
	};
	pmic@a {
		status = "disabled";
	};
};

&tlmm {
	i2c0_active: i2c0-active-state {
		pins = "gpio0", "gpio1";
		function = "qup0";

		bias-pull-up;
		drive-strength = <2>;
	};

	i2c1_active: i2c1-active-state {
		pins = "gpio114", "gpio115";
		function = "qup1";

		bias-pull-up;
		drive-strength = <2>;
	};

	i2c8_active: i2c8-active-state {
		pins = "gpio88", "gpio89";
		function = "qup8";

		bias-pull-up;
		drive-strength = <2>;
	};

	kb_int_active_state: kb-int-active-state {
		kb-int {
			pins = "gpio24";
			function = "gpio";

			bias-pull-up;
			drive-strength = <2>;
			input-enable;
		};
	};

	pcie0_default_state: pcie0-default-state {
		clkreq {
			pins = "gpio36";
			function = "pci_e0";

			bias-pull-up;
		};

		reset-n {
			pins = "gpio35";
			function = "gpio";

			bias-pull-down;
			drive-strength = <2>;
			output-low;
		};

		wake-n {
			pins = "gpio37";
			function = "gpio";

			bias-pull-up;
			drive-strength = <2>;
		};
	};

	pcie3_default_state: pcie3-default-state {
		clkreq {
			pins = "gpio179";
			function = "pci_e3";

			bias-pull-up;
		};

		reset-n {
			pins = "gpio178";
			function = "gpio";

			bias-pull-down;
			drive-strength = <2>;
			output-low;
		};

		wake-n {
			pins = "gpio180";
			function = "gpio";

			bias-pull-up;
			drive-strength = <2>;
		};
	};

	spi3_active: spi3-active-state {
		pins = "gpio144", "gpio145", "gpio146", "gpio147";
		function = "qup3";

		bias-disable;
		drive-strength = <2>;
	};

	tp_int_active_state: tp-int-active-state {
		tp-int {
			pins = "gpio17";
			function = "gpio";

			bias-pull-up;
			drive-strength = <2>;
			input-enable;
		};
	};

	uart13_state: uart13-state {
		cts {
			pins = "gpio43";
			function = "qup13";

			bias-pull-down;
		};

		rts-tx {
			pins = "gpio44", "gpio45";
			function = "qup13";

			bias-disable;
			drive-strength = <2>;
		};

		rx {
			pins = "gpio46";
			function = "qup13";

			bias-pull-up;
		};
	};
};

&uart13 {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&uart13_state>;
};

&ufs_mem_hc {
	status = "okay";

	reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>;

	vcc-supply = <&vreg_l10e_2p9>;
	vcc-max-microamp = <155000>;

	vccq2-supply = <&vreg_l7e_1p8>;
	vccq2-max-microamp = <425000>;
};

&ufs_mem_phy {
	status = "okay";

	vdda-phy-supply = <&vreg_l5e_0p88>;
	vdda-pll-supply = <&vreg_l3c_1p2>;
};

&usb_mp {
	status = "okay";
};

&usb_mp_dwc3 {
	dr_mode = "host";
};

&usb_mp0_hsphy {
	status = "okay";
	vdda-pll-supply = <&vreg_l5e_0p88>;
	vdda18-supply = <&vreg_l12a_1p8>;
	vdda33-supply = <&vreg_l16e_3p0>;
};

&usb_mp0_qmpphy {
	status = "okay";
	vdda-phy-supply = <&vreg_l3c_1p2>;
	vdda-pll-supply = <&vreg_l5e_0p88>;
};

&usb_mp1_hsphy {
	status = "okay";
	vdda-pll-supply = <&vreg_l5e_0p88>;
	vdda18-supply = <&vreg_l12a_1p8>;
	vdda33-supply = <&vreg_l16e_3p0>;
};

&usb_mp1_qmpphy {
	status = "okay";
	vdda-phy-supply = <&vreg_l3c_1p2>;
	vdda-pll-supply = <&vreg_l5e_0p88>;
};

&usb_prim {
	status = "okay";
};

&usb_prim_dwc3 {
	dr_mode = "host";
};

&usb_prim_hsphy {
	status = "okay";

	vdda-pll-supply = <&vreg_l5e_0p88>;
	vdda18-supply = <&vreg_l12a_1p8>;
	vdda33-supply = <&vreg_l16e_3p0>;
};

&usb_prim_qmpphy {
	status = "okay";

	vdda-phy-supply = <&vreg_l3c_1p2>;
	vdda-pll-supply = <&vreg_l5e_0p88>;
};

&usb_sec {
	status = "okay";
};

&usb_sec_dwc3 {
	dr_mode = "host";
};

&usb_sec_hsphy {
	status = "okay";

	vdda-pll-supply = <&vreg_l5e_0p88>;
	vdda18-supply = <&vreg_l12a_1p8>;
	vdda33-supply = <&vreg_l16e_3p0>;
};

&usb_sec_qmpphy {
	status = "okay";

	vdda-phy-supply = <&vreg_l3c_1p2>;
	vdda-pll-supply = <&vreg_l5e_0p88>;
};

&wifi {
	status = "okay";

	memory-region = <&wlan_mem>;

	vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>;
	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
	vdd-1.3-rfa-supply = <&vreg_l9a_1p3>;
	vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
	//vdd-3.3-ch1-supply = <&vreg_l10c>; not used?
};