MW_12_Plot_MODFLOW_2D_final_head_quiver_ksat_SME2016_grid.m

% Plot_MODFLOW_head_flow_1D_general_quickstart.m
%
% 10/28/15 (can handle transient conditions)
%
% plots MODFLOW results: head and flowlines
%
% quiver plot works well (see start_col_coord0, 
% start_lay_coord0 for starting point of streamlines)

clear all, fclose all;
close all,

% --------------------------------------------------------
fl_gcng = 1;  % 1: Crystal, 0: Patrick

% -- directory with simulation results, file names
if fl_gcng
    MOD_simdir = '/home/gcng/workspace/ModelRuns_scratch/MODFLOW_projects/Minntac/test3/test2_1D_3';
else    
    MOD_simdir = 'C:/Hydro_Modeling/MINNTAC_MATLAB_FILES/test2_1D_3';
end
head_file = 'testhead.dat'; % head data
ibound_file = 'ibound.dat'; % needed to get active cell info for reading water budget file
bud_file = 'test.bud'; % water budget file (for flow lines)
lpf_file = 'test_1D.lpf'; % read in for K inputs



% Only ONE can be 1, others 0
if fl_gcng
    fl_MOD_PC = 0;
    fl_MOD_USGS_RedHat = 0; 
    fl_MOD_UBUNTU = 1;
else
    fl_MOD_PC = 1;
    fl_MOD_USGS_RedHat = 0; 
    fl_MOD_UBUNTU = 0;
end
if fl_MOD_PC + fl_MOD_USGS_RedHat + fl_MOD_UBUNTU ~= 1
    fprintf('ERROR!! Only one of following can be equal to 1! \n');
    fprintf('fl_MOD_PC. fl_MOD_USGS_RedHat, fl_MOD_UBUNTU \n');
    fprintf('Exiting...\n');
    return
end

nlay = 75;
ncol = 150;

% - domain size
domain_len = 342.9;
domain_bot_elev = -19; % m
domain_top_elev = 0; % top of domain must be at least this elev (include extra space for WT mov't)


% =========================================================================
if ispc 
    slashstr = '\';
elseif isunix
    slashstr = '/';
end

% - read in HKsat and VKA
fid = fopen([MOD_simdir, slashstr, lpf_file]);
for ii = 1:7 
    line0 = fgets(fid); 
end
format0 = [repmat(' %f', 1, ncol), '\n'];
Ksat = nan(nlay, ncol); 
VK = nan(nlay, ncol); % vertical anisotropy
for ii = 1: nlay
    line0 = fgets(fid);
    Ksat(ii,:) = fscanf(fid, format0);
    line0 = fgets(fid);
    VK(ii,:) = fscanf(fid, format0);
end


out_x_offset = 0;  %[m] for plotting

% - discretization
DELR = domain_len / ncol;  DELC = DELR;
dz = (domain_top_elev - domain_bot_elev)/nlay;


% calculate domain discretization here:
BOTM = [domain_bot_elev: dz: domain_top_elev-dz]';
BOTM = BOTM(end: -1: 1);
TOP = domain_top_elev;


fl_binary = 1;  % 1 for binary
fl_dble = 0;  % 1 for dble prec, 0 for single prec

dry_cell = 1e30;
inactive_cell = 999.99;

% NOTE: for some reason, int w/ bit-length info is trailed by 0!!! (USGS linux)
% windows no bit-length info 
if fl_MOD_USGS_RedHat
    nbitread = 2;
elseif fl_MOD_PC
    nbitread = 0;
elseif fl_MOD_UBUNTU % ubuntu
    nbitread = 1;
end

prec = 4; prec_str = 'real*4';
if fl_dble, prec = 8; prec_str = 'real*8'; end

% -- Get head data and plot it as contour image plots
fid = fopen([MOD_simdir, slashstr, head_file], 'r');

while(1)
    % NOTE: for some reason, int w/ bit-length info is trailed by 0!!!
    a_info = fread(fid, nbitread, 'integer*4');
    kstp = fread(fid, 1, 'integer*4');
    if isempty(kstp)
        break
    end
    kper = fread(fid, 1, 'integer*4');
    pertim = fread(fid, 1, 'real*4');
    totim = fread(fid, 1, 'real*4');
    label = fread(fid, 16, 'char');  label = char(label); %*** ORIG
    % label = fread(fid, 15, 'char');  label = char(label);
    ncol = fread(fid, 1, 'integer*4');
    nrow = fread(fid, 1, 'integer*4');
    ilay = fread(fid, 1, 'integer*4');
    a_info = fread(fid, nbitread, 'integer*4');

    a_data = fread(fid, nbitread, 'integer*4');
    if nbitread == 0, 
        nn = ncol*nrow;
    else
        nn = a_data(1)/prec;
    end
    data = fread(fid, nn, prec_str);
    a_data = fread(fid, nbitread, 'integer*4');

    col_coord = repmat([DELR/2: DELR: domain_len], nlay, 1); % (x)
    col_coord_right = repmat([DELR: DELR: domain_len], nlay, 1); % (x)
    lay_coord = ([TOP; BOTM(1:end-1)] + BOTM)/2;  lay_coord = repmat(lay_coord, 1, ncol); % (z)
    lay_coord_lower = BOTM;  lay_coord_lower = repmat(lay_coord_lower, 1, ncol); % (z)

    data_head = reshape(data,ncol,nrow)';

    % NOTE: head = 999.99 for no flow cells; ignore these
    data_head(data_head > 999.) = nan;
%     data_head(round(data_head) > 0.9e30) = nan;

    if ncol == 1
        plot(data_head, lay_coord);
        ylabel('[m]');
        xlabel('head');
        pause
        hold on
    else
        % head plots
        for loop = 1:2
            figure(10)
            subplot(2,1,loop),
            n_contours = 50;
            if loop == 1            
                [C h] = contour(col_coord, lay_coord, data_head, n_contours);            
                colormap 'cool';
%                 pause
            else
                % NOTE: a couple annoying aspects about imagesc() in Matlab:
                %   - it always want to plot the y-axis in downward ascending
                %   order, hence the need to flip etc
                %   - it plots nan ("Not a number") as the lowest value on 
                %   colorbar. There is a work-around for this, but we won't
                %   bother with it here.
                h = imagesc(col_coord(1,:), -lay_coord(end:-1:1,1), data_head(end:-1:1,:)); 
                ytickv = get(gca,'YTick');
                yticklab = cell(size(ytickv));
                for ii = 1: length(ytickv)
                    yticklab{ii} = num2str(-ytickv(ii));
                end
                set(gca, 'YTick', ytickv, 'YTickLabel', yticklab);
                drawnow
            end
            colorbar;
            xlabel('x [m]'), ylabel('[m]')
            title('head [m]');
        end
        
        % hyd cond (K) plots
        for loop = 1:2
            figure(12)
            subplot(2,1,loop),
            n_contours = 50;
            if loop == 1            
                [C h] = contour(col_coord, lay_coord, (Ksat), n_contours);            
                colormap 'cool';
%                 pause
            else
                % NOTE: a couple annoying aspects about imagesc() in Matlab:
                %   - it always want to plot the y-axis in downward ascending
                %   order, hence the need to flip etc
                %   - it plots nan ("Not a number") as the lowest value on 
                %   colorbar. There is a work-around for this, but we won't
                %   bother with it here.
                h = imagesc(col_coord(1,:), -lay_coord(end:-1:1,1), (Ksat(end:-1:1,:))); 
                ytickv = get(gca,'YTick');
                yticklab = cell(size(ytickv));
                for ii = 1: length(ytickv)
                    yticklab{ii} = num2str(-ytickv(ii));
                end
                set(gca, 'YTick', ytickv, 'YTickLabel', yticklab);
                drawnow
%                 colormap autumn
                
                % overlay grid!!  
                hold on,
                for yy = 1: 5: nlay
                    plot(col_coord(1, [1 end]), ones(2,1)*-lay_coord(yy,1), '-k');
                end
                for yy = 1: 5: ncol
                    plot(ones(2,1)*col_coord(1,yy), -lay_coord([1 end],1), '-k');
                end
            end
            colorbar;
            xlabel('x [m]'), ylabel('[m]')
%             title('Ksat [m/d]');
%             caxis([0 3])
        end        
    end

end
fclose(fid);

print('-dtiff', '-f12', 'fig12grid.tiff');
% return



% =========================================================================
% -- Get flow data and plot it as quiver plots
% Read MODFLOW results for flow
% (only right and lower face flows, not front face flow b/c 2D cross section)

% - adjust this value... depends on how many constant head cells 
% - Get number of const head cells from ibound output file
fmt = [repmat('%4d',1,20), '\n'];
fid = fopen([MOD_simdir, slashstr, ibound_file], 'r');
ibound = fscanf(fid,fmt);
fclose(fid);
ibound = reshape(ibound, ncol, nrow)';
nConstHeadCells = length(find(ibound <0));
% (number of constant head cells + 2)
% NN = 22;  
% NN = 12;
NN = nConstHeadCells + 2;

% return

fid = fopen([MOD_simdir, slashstr, bud_file], 'r');

% - Constant head (subroutine UBUDSV)
% *** WHAT IS THIS VALUE???  
% NOTE: for some reason, int w/ bit-length info is trailed by 0!!!
a_info_i = fread(fid, nbitread, 'integer*4'); 
kstp = fread(fid, 1, 'integer*4');
kper = fread(fid, 1, 'integer*4');
label = fread(fid, 16, 'char');  label = char(label);
ncol = fread(fid, 1, 'integer*4');
nrow = fread(fid, 1, 'integer*4');
nlay = -fread(fid, 1, 'integer*4');
a_info_f = fread(fid, nbitread, 'integer*4'); 
len = zeros(NN,1);
for ii = 1:NN
    a_data_i = fread(fid, nbitread, 'integer*4'); 
    % weird... seems like mix of int and real?
%     dataconstH = fread(fid, a_data_i(1)/prec, prec_str)
    if nbitread == 0, 
        if ii == 1
            nn = 4;
        elseif ii == 2
            nn = 1;
        else
            nn = 2;
        end
    else
        nn = a_data_i(1)/4;
    end
    dataconstH = fread(fid, nn, 'integer*4');
    a_data_f = fread(fid, nbitread, 'integer*4');
    if nbitread > 0, len(ii) = a_data_i(1); end
end
% data = reshape(data,ncol,nrow,nlay);

% - cell-by-cell flow, right face (subroutine UBDSV1)
% NOTE: for some reason, int w/ bit-length info is trailed by 0!!!
a_info_i = fread(fid, nbitread, 'integer*4');
kstp = fread(fid, 1, 'integer*4');
kper = fread(fid, 1, 'integer*4');
label = fread(fid, 16, 'char');  label_right = char(label);
ncol = fread(fid, 1, 'integer*4');
nrow = fread(fid, 1, 'integer*4');
nlay = -fread(fid, 1, 'integer*4');
a_info_f = fread(fid, nbitread, 'integer*4');
a_info2_i = fread(fid, nbitread, 'integer*4');
a = fread(fid, 1, 'integer*4');  % 1
delt = fread(fid, 1, 'real*4');
pertim = fread(fid, 1, 'real*4');
totim = fread(fid, 1, 'real*4');
a_info2_f = fread(fid, nbitread, 'integer*4');
a_data = fread(fid, nbitread, 'integer*4');
if nbitread == 0
    nn = ncol*nlay;
else
    nn = a_data(1)/prec;
end
data = fread(fid, nn, prec_str);
a_data = fread(fid, nbitread, 'integer*4');
if nrow == 1, 
    data_right = reshape(data,ncol,nlay)'; 
else
    data_right = reshape(data,ncol,nrow,nlay); 
end
% data_right = permute(data_right, [2 1]);
% return

% - cell-by-cell flow, lower face (subroutine UBDSV1)
% NOTE: for some reason, int w/ bit-length info is trailed by 0!!!
a_info = fread(fid, nbitread, 'integer*4');
kstp = fread(fid, 1, 'integer*4');
kper = fread(fid, 1, 'integer*4');
label = fread(fid, 16, 'char');  label_lower = char(label);
ncol = fread(fid, 1, 'integer*4');
nrow = fread(fid, 1, 'integer*4');
nlay = -fread(fid, 1, 'integer*4');
a_info = fread(fid, nbitread, 'integer*4');
a_info2 = fread(fid, nbitread, 'integer*4');
a = fread(fid, 1, 'integer*4');  % 1
delt = fread(fid, 1, 'real*4');
pertim = fread(fid, 1, 'real*4');
totim = fread(fid, 1, 'real*4');
a_info2 = fread(fid, nbitread, 'integer*4');
a_data = fread(fid, nbitread, 'integer*4');
if nbitread == 0
    nn = ncol*nlay;
else
    nn = a_data(1)/prec;
end
data = fread(fid, nn, prec_str);
a_data = fread(fid, nbitread, 'integer*4');
if nrow == 1, % x-section
    data_lower = reshape(data,ncol,nlay)'; 
else
    data_lower = reshape(data,ncol,nrow,nlay); 
end
% data_lower = permute(data_lower, [2 1]);

% Assuming flows are volumetric... get 1D flow
dz = [TOP - BOTM(1); BOTM(1:end-1)-BOTM(2:end)];
dz_top = data_head(1,:) - BOTM(1);
if ~isempty(find(dz_top(:) < 0, 1))
    fprintf('Head dropped below top layer! Exiting.... \n');
    return
end
if nrow == 1 % x-section
    dz0 = repmat(dz, 1, ncol);
    dz0(1,:) = dz_top;
    dx0 = ones(nlay, ncol) * DELR;  % horiz
    dy0 = ones(nlay, ncol) * DELC;  % into page
else
    dz0 = reshape(dz, [1 1 nlay]);
    dz0 = repmat(dz0, [ncol, nrow, 1]);
    dz0(:,:,1) = dz_top;
    dx0 = ones(ncol, nrow, nlay) * DELR; % horiz
    dy0 = ones(ncol, nrow, nlay) * DELC; % into page
end
data_right_1D = data_right ./ (dz0 .* dy0);
data_lower_1D = data_lower ./ (dx0 .* dy0);

fclose(fid);
% return
fig_v = [10 10 12 12 11]; % head contour, head imagesc, K
p_v = [1 2 1 2 1];  % subplot index
for loop = [2 4 5]

    % -- Draw pretty streamlines 
    figure(fig_v(loop))
    subplot(2,1,p_v(loop)), hold on
    % col_coord = repmat([DELR/2: DELR: domain_len], nlay, 1); % (x)
    % col_coord = col_coord+out_x_offset;
    % lay_coord = -([TOP; BOTM(1:end-1)] + BOTM)/2;  lay_coord = repmat(lay_coord, 1, ncol); % (z)
%     lay_coord = -abs(lay_coord);
    lay_coord_lower0 = lay_coord_lower;
    if loop > 1 % flip y-axis for imagesc plots only!!
        lay_coord_lower0 = -lay_coord_lower;
    end

    % - where to start streamlines
    if loop > 1 % flip y-axis for imagesc plots only!!
        b = -[-19:2:0]';
    else
        b = [-19:2:0]';
    end
    a = [col_coord_right(1,1): 30: 343]';
    start_col_coord = [a; ones(size(b))*a(1)]; 
    start_lay_coord = [ones(size(a))*b(end); b];
    start_col_coord2 = []; 
    start_lay_coord2 = [];

    start_col_coord0 = [start_col_coord; start_col_coord2];
    start_lay_coord0 = [start_lay_coord; start_lay_coord2];
    h =streamline(col_coord_right,lay_coord_lower0,data_right_1D,data_lower_1D,start_col_coord0,start_lay_coord0);
    % h = streamslice(col_coord_right,lay_coord,data_right_1D,-data_lower_1D); % this has bad arrow sizes...
    % set(gca,'XLim',[DELR/2 260], 'YLim', [417 424]);

    % plot streamlines
    xlabel('x [m]'), ylabel('[m]');
    % title('Streamlines')
    
    % plot quiver (arrows)
    Xdata0 = get(h, 'XData'); Ydata0 = get(h, 'YData');
    hold on,
    N = length(Xdata0);
    scale=0.1; % orig
%     scale=0.5;
%     if loop == 1 || loop == 2 || loop == 3
        for ii = 1:N
        %     NN = length(Xdata0{ii});
        %     n = [1:round(NN/20):NN];
        % %     [Xdata, ind] = sort(Xdata0{ii}, 'ascend');
        % %     Ydata = Ydata0{ii}(ind);
            Xdata = Xdata0{ii};
            Ydata = Ydata0{ii};

            ind = ~isnan(Xdata) & ~isnan(Ydata);
            Xdata = Xdata(ind); Ydata = Ydata(ind);

            NN = length(Xdata);
            n = [1:round(NN/20):NN];

            Zdata_right_1D = interp2(col_coord_right, lay_coord_lower0, data_right_1D, Xdata, Ydata);
            Zdata_lower_1D = interp2(col_coord_right, lay_coord_lower0, data_lower_1D, Xdata, Ydata);
            quiver(Xdata(n), Ydata(n), Zdata_right_1D(n), Zdata_lower_1D(n), scale, 'Color', 'b'); %set(gca,'YDir', 'Reverse');   

%         end
    end
    if loop == 5
        set(gca,'YDir', 'Reverse');
        ylabtick_neg = get(gca,'YTick');
        ylab = cell(size(ylabtick_neg));
        for ii = 1: length(ylabtick_neg)
            ylab{ii} = num2str(-ylabtick_neg(ii));
        end
        set(gca,'YTick', ylabtick_neg, 'YTickLabel', ylab);
    end
    box on
end

for ff = unique(fig_v)
    print('-dtiff', ['-f', num2str(ff)], ['fig', num2str(ff), '.tiff']);
end

% overlay grid!!  
figure(12), subplot(2,1,2)
hold on,
for yy = 1: 5: nlay
    plot(col_coord(1, [1 end]), ones(2,1)*-lay_coord(yy,1), '-k');
end
for yy = 1: 5: ncol
    plot(ones(2,1)*col_coord(1,yy), -lay_coord([1 end],1), '-k');
end
print('-dtiff', '-f12', 'fig12_gridflow.tiff');
print('-depsc', '-f12', 'fig12_gridflow.eps');