-
-
Notifications
You must be signed in to change notification settings - Fork 2.1k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Cura 3.5.1 don't fill gaps between walls #4684
Comments
Try turning off the overlap compensation for the inner walls. |
unfortunately the result does not change |
No way to fill these gaps? :-( |
Have you tried using thinner wall lines? |
Yes smartavionics, thanks, if I print with a thinner line or I print only 3 walls count the sharp angles are not created. |
In the "Shell" category right under "Fill Gaps Between Walls", make sure that the "Filter Out Tiny Gaps" setting is not checked. It's checked by default because for many of the smallest gaps, moving the nozzle there and trying to extrude won't have much of an effect since the delay between the extruder and the flow through the nozzle basically prevents any material from being extruded in that tiny amount of time that the nozzle is over the correct spot. |
Application Version
3.5.1
Platform
Windows 64
Printer
custom
Steps to Reproduce
Slice the file with 0.4 nozzle and 5 wall count
RightAnt blu.zip
Actual Results
the gaps between walls are not filled, the problem is visible in cura preview before the print
Expected results
Fill gaps between walls
Additional Information
The text was updated successfully, but these errors were encountered: