Miner not running #24
Comments
Even after the 'Start Delay' has gone by? Can you try building it with SilentETHMiner v1.3.2 and see if it works? |
And if your connection settings are wrong it will close down, can you screenshot the main page so I can see if everything is right? |
I also tried x for password but no matter what i do there is no nslookup process in task manager....i remember like a week or two ago i did it with older version and it worked fine |
Don't use SSL on nanopool, you need to specify a certification manually, use normal stratum and eth-eu1.nanopool.org:9999 and leave the password blank. |
will try |
Works, nslookup starts up but even with stealth gpu is 50-100% active |
After some time it hides... But there is a big delay between opening task manager and setting itself to inactivity.... process hacker shows 0% gpu at all times |
Could i maybe send you both of my builds so you can test if they work fine? |
GPU should always use 0% GPU load, Ethereum GPU mining only uses the memory clock (can't really by seen since it's not a resource per say) and VRAM (GPU memory, the only thing that really can be seen). |
Could you test them both if i attach wetransfer link with files? no watchdog... just if they are running fine |
Sure |
Both your miners work correctly, although I should say that ETH Idle mining isn't usually required since it's really difficult to find the GPU miner even if you only have 'Stealth' enabled due to it only using the VRAM. The reason to use Idle mining is if you want to free up the VRAM while the computer is in use.in case you need it for something else. |
Hmm interesting, it shouldn't really show anything and I haven't seen any usage in any of the computer I've tested on or helped with. Do you use some sort of Windows Insider version? |
Just regular windows 10 that came with my asus. I have defender turned off... if i have idle and stealth off then it hides but not always... after hiding it then doesnt display any hashrate on nanopool when i check adress |
Yes of course when it hides it pauses the miner so it won't mine anything. But that's weird that you see that in the Task Manager, what GPU do you have? |
Gtx 1050ti |
GTX 1050TI 8GB? |
4gb |
Well then you can't even really mine Ethereum with it due to the requirements Ethereum has https://github.com/UnamSanctam/SilentETHMiner#requirements, do you mine some other Ethash coin? |
I see but i remember that i used to mine eth with this gpu 2018/2019... okay the important thing is that miner works well on other pcs |
Yes the Ethereum DAG size increases every 30 blocks that is added to the network, https://crypt0.zone/dag-file-size/ETH/12239533. Your miner should work fine on other systems that meet the requirements. |
Okay thanks |
I injected into nslookup and i turned off stealth... No nslookup in task manager... same with monero miner... Seems to start the exe but injection doesnt seem to happen
The text was updated successfully, but these errors were encountered: