authenticator.go

package protocol

import (
	"bytes"
	"encoding/binary"
	"fmt"

	"github.com/Unotechsoftware/webauthn/protocol/webauthncbor"
)

var minAuthDataLength = 37

// Authenticators respond to Relying Party requests by returning an object derived from the
// AuthenticatorResponse interface. See §5.2. Authenticator Responses
// https://www.w3.org/TR/webauthn/#iface-authenticatorresponse
type AuthenticatorResponse struct {
	// From the spec https://www.w3.org/TR/webauthn/#dom-authenticatorresponse-clientdatajson
	// This attribute contains a JSON serialization of the client data passed to the authenticator
	// by the client in its call to either create() or get().
	ClientDataJSON URLEncodedBase64 `json:"clientDataJSON"`
}

// AuthenticatorData From §6.1 of the spec.
// The authenticator data structure encodes contextual bindings made by the authenticator. These bindings
// are controlled by the authenticator itself, and derive their trust from the WebAuthn Relying Party's
// assessment of the security properties of the authenticator. In one extreme case, the authenticator
// may be embedded in the client, and its bindings may be no more trustworthy than the client data.
// At the other extreme, the authenticator may be a discrete entity with high-security hardware and
// software, connected to the client over a secure channel. In both cases, the Relying Party receives
// the authenticator data in the same format, and uses its knowledge of the authenticator to make
// trust decisions.
//
// The authenticator data, at least during attestation, contains the Public Key that the RP stores
// and will associate with the user attempting to register.
type AuthenticatorData struct {
	RPIDHash []byte                 `json:"rpid"`
	Flags    AuthenticatorFlags     `json:"flags"`
	Counter  uint32                 `json:"sign_count"`
	AttData  AttestedCredentialData `json:"att_data"`
	ExtData  []byte                 `json:"ext_data"`
}

type AttestedCredentialData struct {
	AAGUID       []byte `json:"aaguid"`
	CredentialID []byte `json:"credential_id"`
	// The raw credential public key bytes received from the attestation data
	CredentialPublicKey []byte `json:"public_key"`
}

// AuthenticatorAttachment https://www.w3.org/TR/webauthn/#platform-attachment
type AuthenticatorAttachment string

const (
	// Platform - A platform authenticator is attached using a client device-specific transport, called
	// platform attachment, and is usually not removable from the client device. A public key credential
	//  bound to a platform authenticator is called a platform credential.
	Platform AuthenticatorAttachment = "platform"
	// CrossPlatform A roaming authenticator is attached using cross-platform transports, called
	// cross-platform attachment. Authenticators of this class are removable from, and can "roam"
	// among, client devices. A public key credential bound to a roaming authenticator is called a
	// roaming credential.
	CrossPlatform AuthenticatorAttachment = "cross-platform"
)

// Authenticators may implement various transports for communicating with clients. This enumeration defines
// hints as to how clients might communicate with a particular authenticator in order to obtain an assertion
// for a specific credential. Note that these hints represent the WebAuthn Relying Party's best belief as to
// how an authenticator may be reached. A Relying Party may obtain a list of transports hints from some
// attestation statement formats or via some out-of-band mechanism; it is outside the scope of this
// specification to define that mechanism.
// See §5.10.4. Authenticator Transport https://www.w3.org/TR/webauthn/#transport
type AuthenticatorTransport string

const (
	// USB The authenticator should transport information over USB
	USB AuthenticatorTransport = "usb"
	// NFC The authenticator should transport information over Near Field Communication Protocol
	NFC AuthenticatorTransport = "nfc"
	// BLE The authenticator should transport information over Bluetooth
	BLE AuthenticatorTransport = "ble"
	// Internal the client should use an internal source like a TPM or SE
	Internal AuthenticatorTransport = "internal"
)

// A WebAuthn Relying Party may require user verification for some of its operations but not for others,
// and may use this type to express its needs.
// See §5.10.6. User Verification Requirement Enumeration https://www.w3.org/TR/webauthn/#userVerificationRequirement
type UserVerificationRequirement string

const (
	// VerificationRequired User verification is required to create/release a credential
	VerificationRequired UserVerificationRequirement = "required"
	// VerificationPreferred User verification is preferred to create/release a credential
	VerificationPreferred UserVerificationRequirement = "preferred" // This is the default
	// VerificationDiscouraged The authenticator should not verify the user for the credential
	VerificationDiscouraged UserVerificationRequirement = "discouraged"
)

// AuthenticatorFlags A byte of information returned during during ceremonies in the
// authenticatorData that contains bits that give us information about the
// whether the user was present and/or verified during authentication, and whether
// there is attestation or extension data present. Bit 0 is the least significant bit.
type AuthenticatorFlags byte

// The bits that do not have flags are reserved for future use.
const (
	// FlagUserPresent Bit 00000001 in the byte sequence. Tells us if user is present
	FlagUserPresent AuthenticatorFlags = 1 << iota // Referred to as UP
	_                                              // Reserved
	// FlagUserVerified Bit 00000100 in the byte sequence. Tells us if user is verified
	// by the authenticator using a biometric or PIN
	FlagUserVerified // Referred to as UV
	_                // Reserved
	_                // Reserved
	_                // Reserved
	// FlagAttestedCredentialData Bit 01000000 in the byte sequence. Indicates whether
	// the authenticator added attested credential data.
	FlagAttestedCredentialData // Referred to as AT
	// FlagHasExtension Bit 10000000 in the byte sequence. Indicates if the authenticator data has extensions.
	FlagHasExtensions //  Referred to as ED
)

// UserPresent returns if the UP flag was set
func (flag AuthenticatorFlags) UserPresent() bool {
	return (flag & FlagUserPresent) == FlagUserPresent
}

// UserVerified returns if the UV flag was set
func (flag AuthenticatorFlags) UserVerified() bool {
	return (flag & FlagUserVerified) == FlagUserVerified
}

// HasAttestedCredentialData returns if the AT flag was set
func (flag AuthenticatorFlags) HasAttestedCredentialData() bool {
	return (flag & FlagAttestedCredentialData) == FlagAttestedCredentialData
}

// HasExtensions returns if the ED flag was set
func (flag AuthenticatorFlags) HasExtensions() bool {
	return (flag & FlagHasExtensions) == FlagHasExtensions
}

// Unmarshal will take the raw Authenticator Data and marshalls it into AuthenticatorData for further validation.
// The authenticator data has a compact but extensible encoding. This is desired since authenticators can be
// devices with limited capabilities and low power requirements, with much simpler software stacks than the client platform.
// The authenticator data structure is a byte array of 37 bytes or more, and is laid out in this table:
// https://www.w3.org/TR/webauthn/#table-authData
func (a *AuthenticatorData) Unmarshal(rawAuthData []byte) error {
	if minAuthDataLength > len(rawAuthData) {
		err := ErrBadRequest.WithDetails("Authenticator data length too short")
		info := fmt.Sprintf("Expected data greater than %d bytes. Got %d bytes\n", minAuthDataLength, len(rawAuthData))
		return err.WithInfo(info)
	}

	a.RPIDHash = rawAuthData[:32]
	a.Flags = AuthenticatorFlags(rawAuthData[32])
	a.Counter = binary.BigEndian.Uint32(rawAuthData[33:37])

	remaining := len(rawAuthData) - minAuthDataLength

	if a.Flags.HasAttestedCredentialData() {
		if len(rawAuthData) > minAuthDataLength {
			a.unmarshalAttestedData(rawAuthData)
			attDataLen := len(a.AttData.AAGUID) + 2 + len(a.AttData.CredentialID) + len(a.AttData.CredentialPublicKey)
			remaining = remaining - attDataLen
		} else {
			return ErrBadRequest.WithDetails("Attested credential flag set but data is missing")
		}
	} else {
		if !a.Flags.HasExtensions() && len(rawAuthData) != 37 {
			return ErrBadRequest.WithDetails("Attested credential flag not set")
		}
	}

	if a.Flags.HasExtensions() {
		if remaining != 0 {
			a.ExtData = rawAuthData[len(rawAuthData)-remaining:]
			remaining -= len(a.ExtData)
		} else {
			return ErrBadRequest.WithDetails("Extensions flag set but extensions data is missing")
		}
	}

	if remaining != 0 {
		return ErrBadRequest.WithDetails("Leftover bytes decoding AuthenticatorData")
	}

	return nil
}

// If Attestation Data is present, unmarshall that into the appropriate public key structure
func (a *AuthenticatorData) unmarshalAttestedData(rawAuthData []byte) {
	a.AttData.AAGUID = rawAuthData[37:53]
	idLength := binary.BigEndian.Uint16(rawAuthData[53:55])
	a.AttData.CredentialID = rawAuthData[55 : 55+idLength]
	a.AttData.CredentialPublicKey = unmarshalCredentialPublicKey(rawAuthData[55+idLength:])
}

// Unmarshall the credential's Public Key into CBOR encoding
func unmarshalCredentialPublicKey(keyBytes []byte) []byte {
	var m interface{}
	webauthncbor.Unmarshal(keyBytes, &m)
	rawBytes, _ := webauthncbor.Marshal(m)
	return rawBytes
}

// ResidentKeyRequired - Require that the key be private key resident to the client device
func ResidentKeyRequired() *bool {
	required := true
	return &required
}

// ResidentKeyUnrequired - Do not require that the private key be resident to the client device.
func ResidentKeyUnrequired() *bool {
	required := false
	return &required
}

// Verify on AuthenticatorData handles Steps 9 through 12 for Registration
// and Steps 11 through 14 for Assertion.
func (a *AuthenticatorData) Verify(rpIdHash, appIDHash []byte, userVerificationRequired bool) error {

	// Registration Step 9 & Assertion Step 11
	// Verify that the RP ID hash in authData is indeed the SHA-256
	// hash of the RP ID expected by the RP.
	if !bytes.Equal(a.RPIDHash[:], rpIdHash) && !bytes.Equal(a.RPIDHash[:], appIDHash) {
		return ErrVerification.WithInfo(fmt.Sprintf("RP Hash mismatch. Expected %x and Received %x\n", a.RPIDHash, rpIdHash))
	}

	// Registration Step 10 & Assertion Step 12
	// Verify that the User Present bit of the flags in authData is set.
	if !a.Flags.UserPresent() {
		return ErrVerification.WithInfo(fmt.Sprintln("User presence flag not set by authenticator"))
	}

	// Registration Step 11 & Assertion Step 13
	// If user verification is required for this assertion, verify that
	// the User Verified bit of the flags in authData is set.
	if userVerificationRequired && !a.Flags.UserVerified() {
		return ErrVerification.WithInfo(fmt.Sprintln("User verification required but flag not set by authenticator"))
	}

	// Registration Step 12 & Assertion Step 14
	// Verify that the values of the client extension outputs in clientExtensionResults
	// and the authenticator extension outputs in the extensions in authData are as
	// expected, considering the client extension input values that were given as the
	// extensions option in the create() call. In particular, any extension identifier
	// values in the clientExtensionResults and the extensions in authData MUST be also be
	// present as extension identifier values in the extensions member of options, i.e., no
	// extensions are present that were not requested. In the general case, the meaning
	// of "are as expected" is specific to the Relying Party and which extensions are in use.

	// This is not yet fully implemented by the spec or by browsers

	return nil
}