SnowInitially
- Requirement
Optional
- Description
Flag for initial snow status [0 or 1]
- Configuration
If the model run starts when there is no snow on the ground, set SnowInitially = 0 and the snow-related parameters will be set accordingly. If the model run starts when there is snow on the ground, the following snow-related parameters must be set appropriately. The value of SnowInitially overrides any values provided for the individual snow-related parameters. To prevent SnowInitially from setting the initial conditions, either omit it from the namelist or set to -999. If values are provided individually, they should be consistent the information provided in SUEWS_Snow.txt .
SnowWaterPavedState
- Requirement
Optional
- Description
Initial amount of liquid water in the snow on paved surfaces Paved
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowWaterBldgsState
- Requirement
Optional
- Description
Initial amount of liquid water in the snow on buildings Bldgs
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowWaterEveTrState
- Requirement
Optional
- Description
Initial amount of liquid water in the snow on evergreen trees EveTr
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowWaterDecTrState
- Requirement
Optional
- Description
Initial amount of liquid water in the snow on deciduous trees DecTr
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowWaterGrassState
- Requirement
Optional
- Description
Initial amount of liquid water in the snow on grass surfaces Grass
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowWaterBSoilState
- Requirement
Optional
- Description
Initial amount of liquid water in the snow on bare soil surfaces BSoil
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowWaterWaterState
- Requirement
Optional
- Description
Initial amount of liquid water in the snow in water Water
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowPackPaved
- Requirement
Optional
- Description
Initial snow water equivalent if the snow on paved surfaces Paved
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowPackBldgs
- Requirement
Optional
- Description
Initial snow water equivalent if the snow on buildings Bldgs
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowPackEveTr
- Requirement
Optional
- Description
Initial snow water equivalent if the snow on evergreen trees EveTr
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowPackDecTr
- Requirement
Optional
- Description
Initial snow water equivalent if the snow on deciduous trees DecTr
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowPackGrass
- Requirement
Optional
- Description
Initial snow water equivalent if the snow on grass surfaces Grass
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowPackBSoil
- Requirement
Optional
- Description
Initial snow water equivalent if the snow on bare soil surfaces BSoil
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowPackWater
- Requirement
Optional
- Description
Initial snow water equivalent if the snow on water Water
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowFracPaved
- Requirement
Optional
- Description
Initial plan area fraction of snow on paved surfaces Paved
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowFracBldgs
- Requirement
Optional
- Description
Initial plan area fraction of snow on buildings Bldgs
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowFracEveTr
- Requirement
Optional
- Description
Initial plan area fraction of snow on evergreen trees EveTr
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowFracDecTr
- Requirement
Optional
- Description
Initial plan area fraction of snow on deciduous trees DecTr
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowFracGrass
- Requirement
Optional
- Description
Initial plan area fraction of snow on grass surfaces Grass
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowFracBSoil
- Requirement
Optional
- Description
Initial plan area fraction of snow on bare soil surfaces BSoil
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowFracWater
- Requirement
Optional
- Description
Initial plan area fraction of snow on water Water
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowDensPaved
- Requirement
Optional
- Description
Initial snow density on paved surfaces Paved
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowDensBldgs
- Requirement
Optional
- Description
Initial snow density on buildings Bldgs
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowDensEveTr
- Requirement
Optional
- Description
Initial snow density on evergreen trees EveTr
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowDensDecTr
- Requirement
Optional
- Description
Initial snow density on deciduous trees DecTr
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowDensGrass
- Requirement
Optional
- Description
Initial snow density on grass surfaces Grass
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowDensBSoil
- Requirement
Optional
- Description
Initial snow density on bare soil surfaces BSoil
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowDensWater
- Requirement
Optional
- Description
Initial snow density on Water
- Configuration
The recommended values can be found from SUEWS_Snow.txt
SnowAlb0
- Requirement
Optional
- Description
Initial snow albedo
- Configuration
The recommended values can be found from SUEWS_Snow.txt