Resident Evil 5 (21690) #1253
Comments
kisak-valve
added
the
Game compatibility - Unofficial
|
It seems to work with the vanilla wine: https://appdb.winehq.org/objectManager.php?sClass=version&iId=32123 Something is different from wine (as Proton is a fork of it) preventing RE 5 from starting. |
|
It also require workarounds:
Need to check that with Proton. |
|
Yes, I also tried those workarounds. But for me the game is not working with vanilla wine (tried wine 3.17 as well as wine 3.8 as stated in the AppDB). The game starts, a window pops up and then Steam hangs up. After a while the game and Steam crashes. I was able to start it with a wine64 prefix with the stable Wine 3.0.3. But then I only got a black screen with mouse after the logos (as stated in the AppDB). If started via the native Steam client with Steam Play, the game starts and directly ends. Just my two cents, maybe it will help while finding a solution. |
Compatibility Report
System Information
FIRST LOG: SECOND LOG: SymptomsOn first run, Windows Live is installed, then nothing happens. Upon force quitting Windows Live with htop, you are greeted with a black window, then it freezes. Second time was same behavior. |
|
I can confirm, the game seems to "hang". Only killing WLIDsvc exe processes with your favorite task manager helps. Then it displays Capcom und Dolby Logo. After that nothing just black screen. Got it running this way: Haven't tested to much yet. Just ran the benchmarks and it looks goods so far. |
|
The game works well following some paths that I will leave below: 1 - Disable GFWL - Go to the game's root page and look for "BH5AE_install.vdf" open and modify by deleting the following lines: "Run Process" 2 - Open the game and close then for the game folder to be created and then download a patch to make the game work correctly. Download and extract these files in the game fol http://www.sb-online.org/maluc/index.php?did=bh5fixes 3 - Now let's download and install WMP11 without it the game will not leave the black screen after the CAPCOM logo. For download: cd /tmp/ To install: cd $HOME/.local/share/Steam/steamapps/compatdata/21690 WINEPREFIX=$PWD/pfx wine /tmp/wmp11/wmfdist11-64.exe (after installing press CTRL + C and rest) WINEPREFIX=$PWD/pfx wine /tmp/wmp11/wmp11-64.exe (after installing press CTRL + C and rest) Now change the version for windows 7 and ready now and just play. Remembering that the game does not work in version 5.0-6 it only works in version 4.11-13 and maybe 4.2-9 |
|
Meanwhile i've fixed startup/exiting problem in lutris script https://lutris.net/games/resident-evil-5/ |
|
And full instruction how to play on ubuntu: |
|
Testing game with latest proton (same with proton-ge), still the same problem, proton starts prefix with "WLIDSvcM.exe WLIDSVC.EXE" processes, launcher will start only after i kill these processes log doesn't gave anything useful dunno who to ping, @aeikum @GloriousEggroll |
|
Hi,
TL;DR: the game works ootb with stl (when xliveless files are found) |
|
@frostworx solution might be the most painless option here It did take some time... it wanted Windows 7 SP1, and it downloads both 32 and 64 bit editions when doing so. (Those get populated into
(~ ... that took a while because of my crap internet connection. Here is the menu:
Online matchmaking working as well. |
|
Thank you for testing and confirmation that it also does work for you, @avindra :) |
|
Now I'm just seeing one problem with the control scheme with an XBOX One controller. There is a It generates this WRONG ❌ config by default: [JOYPAD]
ProductName=Controller (XBOX One For Windows)
A=0
B=1
X=2
Y=3
LEFT=15
RIGHT=13
UP=12
DOWN=14
START=9
BACK=8
LT=4
LB=6
RT=5
RB=7
LSTICK_PUSH=10
LSTICK_VERT=Y
LSTICK_HORZ=X
RSTICK_PUSH=11
RSTICK_VERT=Z
RSTICK_HORZ=RZThis results in some really awkward changes in the mapping. (Read this as X ↛ A
A ↛ Y
Y ↛ X
Start ↛ Right Bumper
Back ↛ Right Bumper
Left Bumper ↛ Left Trigger
Right Bumper ↛ Right Trigger
RSTICK_PUSH ↛ Start
Left Trigger ↛ Right Joystick going down
Right Trigger ↛ Right Joystick going up
After doing some research (barely any hits online for this stuff), I got it semi-working: [JOYPAD]
ProductName=Controller (XBOX One For Windows)
A=0
B=1
X=2
Y=3
LEFT=POV
RIGHT=POV
UP=POV
DOWN=POV
START=7
BACK=6
LT=Z
RT=RZ
LB=4
RB=5
LSTICK_PUSH=8
RSTICK_PUSH=9
LSTICK_HORZ=X
RSTICK_HORZ=RX
LSTICK_VERT=Y
RSTICK_VERT=RYThe remaining problem is:
I think the |
So i just tried it with no luck, when i launched the game the config message apeared for 2 seconds as it's suposed to but then nothing happends after that and i had to remove the wmp command on the config file for it to run but still took like 2m to launch. Also my ps4 controller didn't work, and the worst part was performance wich was bad, so in conclusion the best way so far for me is this :
With all this i jumped from around 40fps to 100fps, already have a lot of hours in this game and all works fine, only some stutter but it goes away after a while. |
|
@NikoBellicRU Interesting method to replace the wmv, I'll have to test that approach. For anyone wondering, that Keep in mind @frostworx solution may require some time to download files (as I noted in my report) which is highly dependent on your internet connection. But after the setup is complete, subsequent launches will be instantaneous. |
Yeah i read that so i waited like 15m looking at the system monitor and i saw that stl/wget/winetricks was running but had no usage at all, also i have 500mb down and 200up so internet is not the problem here. |
It was probably still downloading the files then. The files are stored on some When I did this, it took almost 2 hours to finish downloading the files. |
|
Anyone know how to fix the GPU usage? I'm getting low fps 30-48 and sometimes 60-120. GPU usage goes up and down a lot of times. Screenshots
PROTON LOG: steam-21690.log System Information
RE5 config.ini:
|
I was also having bad performance and the unoffitial patch fixed it. |
The maluc patch? I installed but still the same, GPU usage is low at real game but on the benchmark it works fine most of the time. I even tried to low everything but still the same. It goes up to 120 and down to 20-30 fps, Gpu coolers don't even star start spinning at the "real game". |
|
@illusioon |
vsync, weird, RE6,RE7, RE3 all runs smooth but this one won't run nice XD I will remove the patch and run without it to see if things improve, if doesn't make any effect i will try liquorix and game mode isn't working with void linux at the moment :( |
I managed to fix it. As I thought, it was the patch the problem, now the game works like a charm, I just had to place the "xlive.dll" in the folder of the Launcher.exe Too bad I can't use the fixes provide by that maloc patch. Screenshots
|
Really wierd that it performs better here but worse on your side not sure why :/ |
I tried with this one ( Date: 2017-08-19): http://www.sb-online.org/maluc/index.php?did=bh5fixes But it seems that there is a another one(PATCH UPDATED 04/14/2020): https://steamcommunity.com/sharedfiles/filedetails/?id=1533171339 |
Didn't know about this updated, i reinstalled with it and works as good as the other tho, anyway i rather use this latest one now :) |
|
After applying this patch https://steamcommunity.com/sharedfiles/filedetails/?id=1533171339 I'm able to launch without stl, and it also fixes the controller mapping issues I mentioned previously. |
|
with proton >=5.13 game cannot install gfwl |
|
|
|
You need to install the patch, just extract to the game folder https://steamcommunity.com/sharedfiles/filedetails/?id=1533171339 |
|
With proton 7.0 (and maluc patch), error message changes on log. |
|
@mmbossoni, check this #1464 (comment) |
kisak-valve
changed the title
|
@Obsessee There's still video issues with cutscenes. I see only color bars or black instead of cutscenes and no audio. This is a known issue reported by @mmbossoni as well as on protondb. |
Distro: Ubuntu 18.04
GPU: GTX 980, Nvidia proprietary driver 390.48
Resolution: 2560x1440
RAM: 16GB
Proton 3.7-5 Beta
Immediately exits.
The text was updated successfully, but these errors were encountered: