G1000 seemingly completely non-functional in the latest MSFS update

[fsendventd]

Basically what it says on the tin. SU4, G1000 v0.3.7. The PFD doesn't show any engine information when the MFD is turned off. None of the instruments on either the PFD or MFD work, for that matter. They stay "frozen" at the values they were at when turned on, and don't change at all as the aircraft changes speed, altitude, or direction, or as the engine parameters (RPM, manifold pressure, temperature, etc.) change. Same goes for the engine instruments. I've also been having some issues with the DA62X and DA40-NGX mods, and I think this might be what's causing it. Any idea what I can do to fix this? I've tried reinstalling the mod.

[ArashHosseini]

Same here BUT while Ivao client or vatsim vpilot is running, PFD(buttons) became frozen. Its seems to be some signal stream which blocks the PFD since if disconnect from clients PFD working again.

[Baldk9]

I'm glad I'm not the only one. Total non functional aircraft since update.

[mattnischan]

Can you all double check that you have installed the latest mod version? The freezes for SU4 were fixed in 0.3.7.

You may also want to try with only the G1000 0.3.7 mod installed and nothing else, and see if another mod is causing a conflict. We cannot reproduce any PFD or MFD freezes now on the latest.

[MARCELOHIDALGOMARTINS]

Hello.
For the G1000 worktitle to work here, exclude three "mods" z-bonanza-g36-improvement, worktitle-gx and worktitle - aircraft-cj4. One of them was locking the GlassCockpit buttons.

[Baldk9]

I did the recommended changes, but still non-functioning. I then reinstall the latest update and still not working, all this happened after the last MSFS update.

[fsendventd]

Can you all double check that you have installed the latest mod version? The freezes for SU4 were fixed in 0.3.7.

You may also want to try with only the G1000 0.3.7 mod installed and nothing else, and see if another mod is causing a conflict. We cannot reproduce any PFD or MFD freezes now on the latest.

I definitely have v0.3.7 installed, just checked now. Will try narrowing down which mod breaks it.

[fsendventd]

It looks like the current version of the GX mod is what's causing the issues, removed that one and all is fine. (Still using the DA62X and DA40-NGX, as well as the WT G3000 and CJ4, those all seem to work fine.) That's fair, I suppose, considering that mod is still in development.

[ArashHosseini]

@fsendventd deleting the GX mod did it, thx.

[mattnischan]

And that was with the latest G3X dev8 version?

[ArashHosseini]

@mattnischan yes, G3X dev8.

[Baldk9]

<!-- /* Font Definitions */ @font-face {font-family:"Cambria Math"; panose-1:2 4 5 3 5 4 6 3 2 4;} @font-face {font-family:Calibri; panose-1:2 15 5 2 2 2 4 3 2 4;} /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {margin:0in; font-size:11.0pt; font-family:"Calibri",sans-serif;} a:link, span.MsoHyperlink {mso-style-priority:99; color:blue; text-decoration:underline;} .MsoChpDefault {mso-style-type:export-only;} @page WordSection1 {size:8.5in 11.0in; margin:1.0in 1.0in 1.0in 1.0in;} div.WordSection1 {page:WordSection1;} -->G3x is located where? Sent from Mail for Windows 10 From: S. Arash HosseiniSent: Friday, May 28, 2021 12:15To: Working-Title-MSFS-Mods/fspackagesCc: Baldk9; CommentSubject: Re: [Working-Title-MSFS-Mods/fspackages] G1000 seemingly completely non-functional in the latest MSFS update ***@***.*** yes, G3X dev8.—You are receiving this because you commented.Reply to this email directly, view it on GitHub, or unsubscribe. 

[fsendventd]

And that was with the latest G3X dev8 version?

G3X dev8, yes.

[kherner]

Hello,

I had the same problem, and removing the g3x package solved it. I also tried rolling the g3x back to dev7 just to see what would happen, and the issue was also present.

[Richard-Walter]

I had the same issue but i had g3x back to dev5