Skip to content

Latest commit

 

History

History
63 lines (50 loc) · 5.12 KB

README.md

File metadata and controls

63 lines (50 loc) · 5.12 KB
Raw

prebuilt-firmware

This repository contains a series of boot asset files required to rebuild a BOOT.BIN for each target board along with a top level Makefile and simple build targets. The full prebuilt SD card image for each target can also be found in the Linux Prebuilt Images wiki page under the appropriate release version.

File origins

Folder Origin
k26-som-kria BSP Built with PetaLinux 2023.2
kr260-kria BSP Built with PetaLinux 2023.2
kv260-kria BSP Built with PetaLinux 2023.2
k24c-som-kria BSP Built with PetaLinux 2023.2
kd240-kria BSP Built with PetaLinux 2023.2
vck190-versal BSP Built with PetaLinux 2023.2
vmk180-versal BSP Built with PetaLinux 2023.2
vpk120-versal BSP Built with PetaLinux 2023.2
vpk180-versal BSP Built with PetaLinux 2023.2
vhk158-versal BSP Built with PetaLinux 2023.2
zc702-zynq BSP Built with PetaLinux 2023.2
zc706-zynq BSP Built with PetaLinux 2023.2
zcu102-zynqmp BSP Built with PetaLinux 2023.2
zcu104-zynqmp BSP Built with PetaLinux 2023.2
zcu106-zynqmp BSP Built with PetaLinux 2023.2
zcu111-zynqmp BSP Built with PetaLinux 2023.2
zcu216-zynqmp BSP Built with PetaLinux 2023.2

Command Examples

default make target (all):

The following commands build BOOT.BIN for the board specified in the variable board, using target architecture specified by arch. If necessary, bootgen shall be fetched and compiled from source if not already present in the working directory.

make board={boardname}-zynqmp arch={archname}

 make board=zcu102-zynqmp  arch=zynqmp
 make board=kr260-kria     arch=zynqmp
 make board=vck190-versal  arch=versal

make clean:

Remove BOOT.BIN for a specified board:

make board={boardname}-zynqmp arch={archname} clean

make deepclean:

Remove BOOT.BIN for the specified board and also remove the downloaded bootgen sources and compiled binary:

board={boardname}-zynqmp arch={archname} deepclean

bootgen_version variable:

If a different version of bootgen is required, the variable bootgen_version can be used to override the default. If used, the variable must be specified for all make targets in which it should be overwritten. The default value of bootgen_version can be found in the top of the Makefile, and should reflect the latest bootgen branch. A list of current branches can be found at https://github.com/Xilinx/bootgen/branches . This should not be changed from the default unless there is a good reason, and these sources will not have been tested with versions other than the default.

make bootgen_version=xlnx_rel_v2023.2 board=kr260-kria arch=zynqmp
make bootgen_version=xlnx_rel_v2023.2 board=kr260-kria arch=zynqmp clean
make bootgen_version=xlnx_rel_v2023.2 board=kr260-kria arch=zynqmp cleanall

(c) Copyright 2023 Advanced Micro Devices, Inc / Xilinx, Inc All rights reserved.