epanet.m

classdef epanet <handle
    %EPANET-Matlab Toolkit v2.1: A Matlab Class for EPANET and EPANET-MSX
    %libraries
    %
    %
    %   How to run: 
    %   d=epanet('Net1.inp');
    %   
    %   To select a different DLL version:  
    %   d=epanet('Net1.inp','epanet2');
    %
    %   EPANET is software that models water distribution piping systems
    %   developed by the US EPA and provided under a public domain licence.
    %   This Matlab Class serves as an interface between Matlab and
    %   EPANET/EPANET-MSX, to assist researchers and the industry when
    %   solving problems related with water distribution systems.
    %
    %   EPANET and EPANET-MSX were developed by the Water Supply and Water
    %   Resources Division of the U.S. Environmental Protection Agency's
    %   National Risk Management Research Laboratory. EPANET is under the
    %   Public Domain and EPANET-MSX under GNU LGPL.
    %
    %   The latest EPANET files can downloaded at:
    %   https://github.com/OpenWaterAnalytics/epanet
    %
    %   Inspired by:
    %   EPANET-Matlab Wrappers (Jim Uber)
    %   EPANET-Matlab Toolkit (Demetrios Eliades)
    %   getwdsdata (Philip Jonkergouw)   
    %
    %   EPANET-Matlab Class Licence:
    %
    %   Copyright 2016 KIOS Research Center for Intelligent Systems and
    %   Networks, University of Cyprus (www.kios.org.cy)
    %
    %   Licensed under the EUPL, Version 1.1 or - as soon they will be
    %   approved by the European Commission - subsequent libepanets of the
    %   EUPL (the "Licence"); You may not use this work except in
    %   compliance with the Licence. You may obtain a copy of the Licence
    %   at:
    %
    %   http://ec.europa.eu/idabc/eupl
    %
    %   Unless required by applicable law or agreed to in writing, software
    %   distributed under the Licence is distributed on an "AS IS" basis,
    %   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
    %   implied. See the Licence for the specific language governing
    %   permissions and limitations under the Licence.
     
    properties
        ControlLevelValues;          % The control level values
        ControlLinkIndex;            % Set of control links index
        ControlNodeIndex;            % Set of control nodes index
        ControlRules;                % Retrieves the parameters of all control statements
        ControlRulesCount;           % Number of controls
        Controls;                    % Controls info
        ControlSettings;             % Settings for the controls
        ControlTypes;                % Set of control types
        ControlTypesIndex;           % Index of the control types
        CurveCount;                  % Number of curves
        CurvesInfo;                  % Curves info
        EnergyEfficiencyUnits;       % Units for efficiency
        EnergyUnits;                 % Units for energy
        Errcode;                     % Code for the EPANET error message
        InputFile;                   % Name of the input file
        Iterations;                  % Iterations to reach solution
        LibEPANET;                   % EPANET library dll
        LibEPANETpath;               % EPANET library dll path
        libFunctions;                % EPANET functions in dll
        LinkBulkReactionCoeff;       % Bulk reaction coefficient of each link
        LinkCount;                   % Number of links
        LinkDiameter;                % Diameter of each link
        LinkFlowUnits;               % Units of flow
        LinkFrictionFactorUnits;     % Units for friction factor
        LinkIndex;                   % Index of links
        LinkInitialSetting;          % Initial settings of links
        LinkInitialStatus;           % Initial status of links
        LinkLength;                  % Length of links
        LinkLengthsUnits;            % Units of length
        LinkLengthUnits;             % Units of length
        LinkMinorLossCoeff;          % Minor loss coefficient of links
        LinkMinorLossCoeffUnits;     % Minor loss coefficient units
        LinkNameID;                  % Name ID of links
        LinkPipeCount;               % Number of pipes
        LinkPipeDiameterUnits;       % Units for pipe diameters
        LinkPipeIndex;               % Index of pipe links
        LinkPipeNameID;              % Name ID of pipe links
        LinkPipeRoughnessCoeffUnits; % Pipe roughness coefficient units
        LinkPumpCount;               % Number of pumps
        LinkPumpHeadCurveIndex;      % Head curve indices
        LinkPumpIndex;               % Index of pumps
        LinkPumpNameID;              % Name ID of pumps
        LinkPumpPatternIndex;        % Index of pump pattern
        LinkPumpPatternNameID;       % ID of pump pattern
        LinkPumpPowerUnits;          % Units of power
        LinkPumpType;                % Pump type e.g constant horsepower, power function, user-defined custom curv
        LinkPumpTypeCode;            % Pump index/code
        LinkRoughnessCoeff;          % Roughness coefficient of links
        LinkType;                    % ID of link type
        LinkTypeIndex;               % Index of link type
        LinkValveCount;              % Number of valves
        LinkValveIndex;              % Index of valves
        LinkValveNameID;             % ID name of valves
        LinkVelocityUnits;           % Units for velocity
        LinkWallReactionCoeff;       % Wall reaction coefficient of links
        NodeBaseDemands;             % Base demands of nodes
        NodeCoordinates;             % Coordinates for each node (long/lat & intermediate pipe coordinates)
        NodeCount;                   % Number of nodes
        NodeDemandPatternIndex;      % Index of demand patterns
        NodeDemandPatternNameID;     % ID of demand patterns
        NodeDemandUnits;             % Units for demand
        NodeElevations;              % Elevation of nodes
        NodeElevationUnits;          % Units for elevation
        NodeEmitterCoeff;            % Emmitter Coefficient of nodes
        NodeEmitterCoefficientUnits; % Units for emitter coefficient
        NodeHeadUnits;               % Nodal head units
        NodeIndex;                   % Index of nodes
        NodeInitialQuality;          % Initial quality of nodes
        NodeJunctionCount;           % Number of junctions
        NodeJunctionIndex;           % Index of node junctions
        NodeJunctionNameID;          % Name ID of node junctions
        NodeNameID;                  % Name ID of all nodes
        NodeDemandCategoriesNumber;  % Number of demand categories for nodes
        NodePatternIndex;            % Node demand pattern indices
        NodePressureUnits;           % Units for Pressure
        NodeReservoirCount;          % Number of reservoirs
        NodeReservoirIndex;          % Index of reservoirs
        NodeReservoirNameID;         % Name ID of reservoirs
        NodesConnectingLinksID;      % Name IDs of nodes which connect links
        NodesConnectingLinksIndex;   % Indices of nodes which connect links
        NodeSourcePatternIndex;      % Index of pattern for node sources
        NodeSourceQuality;           % Quality of node sources
        NodeSourceTypeIndex;         % Index of source type
        NodeTankBulkReactionCoeff;   % Bulk reaction coefficients in tanks
        NodeTankCount;               % Number of tanks
        NodeTankDiameter;            % Diameters of tanks
        NodeTankDiameterUnits;       % Units for tank diameters
        NodeTankIndex;               % Indices of Tanks
        NodeTankInitialLevel;        % Initial water level in tanks
        NodeTankInitialWaterVolume;  % Initial water volume in tanks
        NodeTankMaximumWaterLevel;   % Maximum water level in tanks
        NodeTankMaximumWaterVolume;  % Maximum water volume
        NodeTankMinimumFraction;     % Fraction of the total tank volume devoted to the inlet/outlet compartment
        NodeTankMinimumWaterLevel;   % Minimum water level
        NodeTankMinimumWaterVolume;  % Minimum water volume
        NodeTankMixingModelCode;     % Code of mixing model (MIXED:0, 2COMP:1, FIFO:2, LIFO:3)
        NodeTankMixingModelType;     % Type of mixing model (MIXED, 2COMP, FIFO, or LIFO)
        NodeTankMixZoneVolume;       % Mixing zone volume
        NodeTankNameID;              % Name ID of Tanks
        NodeTankReservoirCount;      % Number of tanks and reservoirs
        NodeTankVolumeCurveIndex;    % Index of curve for tank volumes
        NodeTankVolumeUnits;         % Units for volume
        NodeType;                    % ID of node type
        NodeTypeIndex;               % Index of nodetype
        OptionsAccuracyValue;        % Convergence value (0.001 is default)
        OptionsEmitterExponent;      % Exponent of pressure at an emmiter node (0.5 is default)
        OptionsHeadloss;             % Headloss formula (Hazen-Williams, Darcy-Weisbach or Chezy-Manning)*** Not implemented *** BinOptionsHeadloss
        OptionsHydraulics;           % Save or Use hydraulic soltion. *** Not implemented ***
        OptionsMaxTrials;            % Maximum number of trials (40 is default)
        OptionsPattern;              % *** Not implemented *** % but get with BinOptionsPattern
        OptionsPatternDemandMultiplier; % Multiply demand values (1 is default)
        OptionsQualityTolerance;     % Tolerance for water quality (0.01 is default)
        OptionsSpecificGravity;      % *** Not implemented *** % but get with BinOptionsSpecificGravity
        OptionsUnbalanced;           % *** Not implemented *** % but get with BinOptionsUnbalanced
        OptionsViscosity;            % *** Not implemented *** % but get with BinOptionsViscosity
        Pattern;                     % Get all patterns - matrix
        PatternAverageValue;         % Average value of patterns
        PatternCount;                % Number of patterns
        PatternDemandsUnits;         % Units for demands
        PatternIndex;                % Indices of the patterns
        PatternLengths;              % Length of the patterns
        PatternNameID;               % ID of the patterns
        QualityChemName;             % Quality Chem Name
        QualityChemUnits;            % Quality Chem Units
        QualityCode;                 % Water quality analysis code (None:0/Chemical:1/Age:2/Trace:3)
        QualityReactionCoeffBulkUnits;   % Bulk reaction coefficient units
        QualityReactionCoeffWallUnits;   % Wall reaction coefficient units
        QualitySourceMassInjectionUnits; % Units for source mass injection
        QualityTraceNodeIndex;       % Index of trace node (0 if QualityCode<3)
        QualityType;                 % Water quality analysis type (None/Chemical/Age/Trace)
        QualityUnits;                % Units for quality concentration.
        QualityWaterAgeUnits;        % Units for water age
        RelativeError;               % Relative error - hydraulic simulation statistic
%         RulePremises;
%         RuleTrueActions;
%         RuleFalseActions;
%         RulePriority;       
        TimeHaltFlag;                % Number of halt flag
        TimeHTime;                   % Number of htime
        TimeHydraulicStep;           % Hydraulic time step
        TimeNextEvent;               % Find the lesser of the hydraulic time step length, or the time to next fill/empty
        TimePatternStart;            % Pattern start time
        TimePatternStep;             % Pattern Step
        TimeQualityStep;             % Quality Step
        TimeReportingPeriods;        % Reporting periods
        TimeReportingStart;          % Start time for reporting
        TimeReportingStep;           % Reporting time step
        TimeRuleControlStep;         % Time step for evaluating rule-based controls
        TimeSimulationDuration;      % Simulation duration
        TimeStartTime;               % Number of start time
        TimeStatisticsIndex;         % Index of time series post-processing type ('NONE':0,'AVERAGE':1,'MINIMUM':2,'MAXIMUM':3, 'RANGE':4)
        TimeStatisticsType;          % Type of time series post-processing ('NONE','AVERAGE','MINIMUM','MAXIMUM', 'RANGE')
        ToolkitConstants;            % Contains all parameters from epanet2.h
        Units_SI_Metric;             % Equal with 1 if is SI-Metric
        Units_US_Customary;          % Equal with 1 if is US-Customary
        Version;                     % EPANET version
        
        % Parameters used with EPANET MSX
        MSXLibEPANET;                % MSX EPANET library dll
        MSXLibEPANETPath;            % MSX EPANET library path
        MSXConstantsNameID;          % ID name of constants
        MSXConstantsValue;           % Value of constants
        MSXConstantsCount;           % Number of constants
        MSXConstantsIndex;           % Index of constants
        MSXParametersCount;          % Number of parameters
        MSXPatternsCount;            % Number of msx patterns
        MSXSpeciesCount;             % Number of species
        MSXLinkInitqualValue;        % Initial concentration of chemical species assigned to links of the pipe network
        MSXNodeInitqualValue;        % Initial concentration of chemical species assigned to nodes
        MSXFile;                     % Name of the msx file
        MSXTempFile;                 % Name of the temp msx file
        MSXParametersNameID;         % ID name of parameters
        MSXParametersIndex;          % Index name of parameters
        MSXParametersPipesValue;     % Value of reaction parameters for pipes
        MSXParametersTanksValue;     % Value of reaction parameters for tanks
        MSXPatternsNameID;           % ID name of msx patterns
        MSXPatternsIndex;            % Index of msx patterns
        MSXPatternsLengths;          % Number of time periods in all patterns
        MSXPattern;                  % Get all msx patterns
        MSXEquationsPipes;           % Species dynamics in pipes
        MSXSources;                  % Sources info
        MSXSourceLevel;              % Value of all nodes source level
        MSXSourceNodeNameID;         % ID label of all nodes
        MSXSourcePatternIndex;       % Value of all node source pattern index
        MSXSourceType;               % Value of all node source type 'CONCEN','MASS', 'SETPOINT', 'FLOWPACED'
        MSXSourceTypeCode;           % Code of source type
        MSXSpeciesATOL;              % Absolute tolerance used to determine when two concentration levels of a species are the same
        MSXSpeciesIndex;             % Index name of species
        MSXSpeciesNameID;            % ID name of species
        MSXSpeciesRTOL;              % Relative accuracy level on a species concentration used to adjust time steps in the RK5 and ROS2 integration methods
        MSXSpeciesType;              % Type of all species, bulk or wall
        MSXSpeciesUnits;             % Species mass units
        MSXEquationsTanks;           % Species dynamics in tanks
        MSXEquationsTerms;           % Species dynamics in terms
        
        % Parameters used when the Binary mode is used 
        Bin;                         % Check if use Bin functions (use saveInputFile if is 1)
        BinControlLinksID;           % Set of control links ID
        BinControlNodesID;           % Set of control nodes ID
        BinControlRulesCount;        % Number of controls
        BinControlsInfo;             % Controls info
        BinCountInitialQualitylines; % Count lines used by quality section
        BinCountPatternlines;        % Count lines used by pattern section
        BinCountReactionlines;       % Count lines used by reaction section
        BinCountStatuslines;         % Count lines used by status section
        BinCurveAllLines;            % Curves info from section 
        BinCurveCount;               % Number of curves
        BinCurveNameID;              % ID name of curves
        BinCurveTypes;               % Type of curves 
        BinCurveXvalue;              % X-value of curves
        BinCurveYvalue;              % Y-value of curves
        BinLinkBulkReactionCoeff;    % Bulk reaction coefficient of each link
        BinLinkCount;                % Number of links
        BinLinkDiameters;            % Diameter of each link
        BinLinkFlowUnits;            % Units of flow
        BinLinkFromNode;             % IDs of node at start of link
        BinLinkGlobalBulkReactionCoeff;% Global Bulk Reaction Coeff
        BinLinkGlobalWallReactionCoeff;% Global Wall Reaction Coeff
        BinLinkInitialStatus;        % Initial status of links
        BinLinkInitialStatusNameID;  % Name ID of links where is status refers in BinLinkInitialStatus
        BinLinkLengths;              % Length of links
        BinLinkNameID;               % Name ID of links
        BinLinkPipeCount;            % Number of pipes
        BinLinkPipeDiameters;        % Diameter of each pipe
        BinLinkPipeIndex;            % Index of pipe links
        BinLinkPipeLengths;          % Length of pipes
        BinLinkPipeMinorLoss;        % Minor loss coefficient of pipes
        BinLinkPipeNameID;           % Name ID of pipes
        BinLinkPipeRoughness;        % Roughness coefficient of pipes
        BinLinkPipeStatus;           % Initial status of pipes
        BinLinkPumpCount;            % Number of pumps
        BinLinkPumpCurveNameID;      % Curve Name ID used from pumps
        BinLinkPumpIndex;            % Index of pumps
        BinLinkPumpNameID;           % Name ID of pumps
        BinLinkPumpNameIDPower;      % Name ID of pumps with Power
        BinLinkPumpPatterns;         % Patterns used from pumps
        BinLinkPumpPower;            % Power of pumps
        BinLinkPumpStatus;           % Initial status of pumps
        BinLinkPumpStatusNameID;     % Name ID of pumps where is status refers in BinLinkPumpStatus
        BinLinkRoughnessCoeff;       % Roughness coefficient of links
        BinLinkSettings;             % Initial settings of links
        BinLinkToNode;               % IDs of node at start of link
        BinLinkType;                 % ID of link type
        BinLinkValveCount;           % Number of valves
        BinLinkValveDiameters;       % Diameter of each valve
        BinLinkValveIndex;           % Index of valve links
        BinLinkValveMinorLoss;       % Minor loss coefficient of valves
        BinLinkValveNameID;          % Name ID of valves
        BinLinkValveSetting;         % Initial settings of valves
        BinLinkValveStatus;          % Initial status of valves
        BinLinkValveStatusNameID;    % Name ID of valves where is status refers in BinLinkValveStatus
        BinLinkValveType;            % Valve type, 'PRV', 'PSV', 'PBV', 'FCV', 'TCV', 'GPV'
        BinLinkWallReactionCoeff;    % Wall reaction coefficient of links
        BinNodeBaseDemands;          % Base demands of nodes
        BinNodeCoordinates;          % Coordinates for each node (long/lat & intermediate pipe coordinates) - vertices
        BinNodeCount;                % Number of nodes
        BinNodeJunDemandPatternNameID;% ID of demand patterns
        BinNodeElevations;           % Elevation of nodes
        BinNodeInitialQuality;       % Initial quality of nodes
        BinNodeJunctionCount;        % Number of junctions
        BinNodeJunctionElevation;    % Elevation of junctions
        BinNodeJunctionIndex;        % Index of junctions
        BinNodeJunctionNameID;       % Name ID of junctions
        BinNodeJunctionsBaseDemands; % Base demands of junctions
        BinNodeJunctionsBaseDemandsID;% Name ID of junctions where is basedemand refers in BinNodeJunctionsBaseDemands
        BinNodeNameID;               % Name ID of nodes
        BinNodePressureUnits;        % Units for Pressure
        BinNodeResDemandPatternNameID;% ID of demand patterns for reservoirs
        BinNodeReservoirCount;       % Number of reservoirs
        BinNodeReservoirElevation;   % Elevation of reservoirs
        BinNodeReservoirIndex;       % Index of reservoirs
        BinNodeReservoirNameID;      % Name ID of reservoirs
        BinNodeSourcePatternIndex;   % Index of pattern for node sources
        BinNodeSourcePatternNameID;  % ID of pattern for node sources
        BinNodeSourceQuality;        % Quality of node sources
        BinNodeSourceType;           % Source Types
        BinNodeSourceTypeIndex;      % Index of source type   
        BinNodeTankCount;            % Number of tanks
        BinNodeTankDiameter;         % Diameters of tanks
        BinNodeTankElevation;        % Elevations of tanks
        BinNodeTankIndex;            % Index of tanks
        BinNodeTankInitialLevel;     % Initial water level in tanks
        BinNodeTankMaximumWaterLevel;% Maximum water level in tanks
        BinNodeTankMinimumFraction;  % Fraction of the total tank volume devoted to the inlet/outlet compartment
        BinNodeTankMinimumWaterLevel;% Minimum water level
        BinNodeTankMinimumWaterVolume;% Minimum water volume
        BinNodeTankMixID;            % Name ID of tanks mix
        BinNodeTankMixModel;         % Mix Model Type
        BinNodeTankNameID;           % Name ID of tanks
        BinNodeTankReservoirCount;   % Number of reservoirs
        BinNodeType;                 % ID of node type
        BinOptionsAccuracyValue;     % Convergence value (0.001 is default)
        BinOptionsDiffusivity;       % Diffusivity value (1 is default)
        BinOptionsEmitterExponent;   % Exponent of pressure at an emmiter node (0.5 is default)
        BinOptionsHeadloss;          % Headloss formula (Hazen-Williams, Darcy-Weisbach or Chezy-Manning)
        BinOptionsMaxTrials;         % Maximum number of trials (40 is default)
        BinOptionsPattern;           % Pattern to be applied to all junctions where no demand pattern was specified
        BinOptionsPatternDemandMultiplier;% Multiply demand values (1 is default)
        BinOptionsQualityTolerance;  % Tolerance for water quality (0.01 is default)
        BinOptionsSpecificGravity;   % Ratio of the density of the fluid being modeled to that of water at 4 deg. C (unitless)
        BinOptionsUnbalanced;        % Determines what happens if a hydraulic solution cannot be reached (STOP is default) STOP/CONTINUE 
        BinOptionsViscosity;         % Kinematic viscosity of the fluid being modeled relative to that of water at 20 deg. C (1.0 centistoke)(1 is default)
        BinPatternCount;             % Number of patterns
        BinPatternLengths;           % Length of the patterns
        BinPatternMatrix;            % Get all patterns - matrix
        BinPatternNameID;            % ID of the patterns
        BinPatternValue;             % Patterns values for all
        BinQualityCode;              % Water quality analysis code (None:0/Chemical:1/Age:2/Trace:3)
        BinQualityTraceNodeID;       % ID of trace node (0 if QualityCode<3)
        BinQualityTraceNodeIndex;    % Index of trace node (0 if QualityCode<3)
        BinQualityType;              % Water quality analysis type (None:0/Chemical:1/Age:2/Trace:3)
        BinQualityUnits;             % Units for quality concentration.
        BinRulesControlLinksID;      % Set of rule links ID
        BinRulesControlNodesID;      % Set of rule nodes ID
        BinRulesControlsInfo;        % Rules info from section 
        BinRulesCount;               % Number of rules
        BinUnits_SI_Metric;          % Equal with 1 if is SI-Metric
        BinTempfile;                 % Name of the temp input file
        BinTimeHydraulicStep;        % Hydraulic time step
        BinTimePatternStart;         % Pattern start time
        BinTimePatternStep;          % Pattern Step
        BinTimeQualityStep;          % Quality Step
        BinTimeReportingStart;       % Start time for reporting
        BinTimeReportingStep;        % Reporting time step
        BinTimeSimulationDuration;   % Simulation duration
        BinTimeStatistics;           % Type of time series post-processing ('NONE','AVERAGE','MINIMUM','MAXIMUM', 'RANGE')
        BinTimeStatisticsIndex;      % Index of time series post-processing type ('NONE':0,'AVERAGE':1,'MINIMUM':2,'MAXIMUM':3, 'RANGE':4)
        BinUnits;                    % Units of all parameters
        BinUnits_US_Customary;       % Equal with 1 if is US-Customary 
        CMDCODE;                     % Code=1 Hide, Code=0 Show (messages at command window)
    end
    properties (Constant = true)
        classversion='2.1.5'; % comment function for net-builder branch
        
        TYPECONTROL={'LOWLEVEL','HIGHLEVEL', 'TIMER', 'TIMEOFDAY'}; % Constants for control: 'LOWLEVEL','HILEVEL', 'TIMER', 'TIMEOFDAY'
        TYPECURVE={'PUMP','EFFICIENCY','VOLUME','HEADLOSS'}; % Constants for pump curves: 'PUMP','EFFICIENCY','VOLUME','HEADLOSS'
        TYPELINK={'CVPIPE', 'PIPE', 'PUMP', 'PRV', 'PSV', 'PBV', 'FCV', 'TCV', 'GPV'}; % Constants for links: 'CVPIPE', 'PIPE', 'PUMP', 'PRV', 'PSV', 'PBV', 'FCV', 'TCV', 'GPV', 'VALVE'
        TYPEMIXMODEL={'MIX1','MIX2', 'FIFO','LIFO'}; % Constants for mixing models: 'MIX1','MIX2', 'FIFO','LIFO'
        TYPENODE={'JUNCTION','RESERVOIR', 'TANK'}; % Contants for nodes: 'JUNCTION','RESERVOIR', 'TANK'
        TYPEPUMP={'CONSTANT_HORSEPOWER', 'POWER_FUNCTION', 'CUSTOM'}; % Constants for pumps: 'CONSTANT_HORSEPOWER', 'POWER_FUNCTION', 'CUSTOM'
        TYPEQUALITY={'NONE', 'CHEM', 'AGE', 'TRACE', 'MULTIS'}; % Constants for quality: 'NONE', 'CHEM', 'AGE', 'TRACE', 'MULTIS'
        TYPEREPORT={'YES','NO','FULL'}; % Constants for report: 'YES','NO','FULL'
        TYPESOURCE={'CONCEN','MASS', 'SETPOINT', 'FLOWPACED'}; % Constants for sources: 'CONCEN','MASS', 'SETPOINT', 'FLOWPACED'
        TYPESTATS={'NONE','AVERAGE','MINIMUM','MAXIMUM', 'RANGE'}; % Constants for statistics: 'NONE','AVERAGE','MINIMUM','MAXIMUM', 'RANGE'
        TYPEUNITS={'CFS', 'GPM', 'MGD', 'IMGD', 'AFD', 'LPS', 'LPM', 'MLD', 'CMH', 'CMD'}; % Constants for units: 'CFS', 'GPM', 'MGD', 'IMGD', 'AFD', 'LPS', 'LPM', 'MLD', 'CMH', 'CMD'
        
        MSXTYPEAREAUNITS={'FT2','M2','CM2'}; % sets the units used to express pipe wall surface area
        MSXTYPERATEUNITS={'SEC','MIN','HR','DAY'}; % is the units in which all reaction rate terms are expressed
        MSXTYPESOLVER={'EUL','RK5','ROS2'}; % is the choice of numerical integration method used to solve the reaction system
        MSXTYPECOUPLING={'FULL','NONE'}; % is the choice of numerical integration method used to solve the reaction system
        MSXTYPECOMPILER={'NONE','VC','GC'}; % is the choice of numerical integration method used to solve the reaction system
        MSXTYPESOURCE={'NOSOURCE','CONCEN', 'MASS', 'SETPOINT','FLOWPACED'}; % Constants for sources: 'NO SOURCE''CONCEN','MASS', 'SETPOINT', 'FLOWPACED'
        MSXTYPENODE=0; % for a node
        MSXTYPELINK=1; % for a link
    end
    methods
        function obj = epanet(varargin)
            %Constructor of the EPANET Class
            try unloadlibrary('epanet2');catch e; end
            try unloadlibrary('epanetmsx');catch e; end
            % DLLs
            arch = computer('arch');
            pwdepanet = fileparts(which(mfilename));
            if strcmpi(arch,'win64')% if no DLL is given, select one automatically
                obj.LibEPANETpath = [pwdepanet,'/64bit/'];
            elseif strcmpi(arch,'win32')
                obj.LibEPANETpath = [pwdepanet,'/32bit/'];
            end
            if strcmpi(arch(1:4),'glnx')
                obj.LibEPANETpath = [pwdepanet,'/glnx/'];
                obj.LibEPANET = 'libepanet';
            end
            if ~isdeployed
                obj.InputFile=which(varargin{1}); % Get name of INP file
            else
                obj.InputFile=varargin{1};   
            end
            % Bin functions
            if nargin>1
                if strcmpi(varargin{2},'BIN')
                    obj.LibEPANET = '';
                    obj.BinTempfile=[obj.InputFile(1:end-4),'_temp.inp'];
                    copyfile(obj.InputFile,obj.BinTempfile);
                    obj.InputFile=obj.BinTempfile;
                    obj.Bin=0;
                    if nargin==3, if strcmpi(varargin{3},'LOADFILE'); return; end;end;
                    obj = BinUpdateClass(obj);
                    obj.saveBinInpFile;
                    return;
                end
            end
            obj.Bin=1;
            [~,inp]=fileparts(obj.InputFile);
            if ~isempty(find(inp==' '))
                warning(['File "', obj.InputFile, '" is not a valid.']);return;
            end
            if nargin==2 && ~strcmpi(varargin{2},'loadfile')
                [pwdDLL,obj.LibEPANET] = fileparts(varargin{2}); % Get DLL LibEPANET (e.g. epanet20012x86 for 32-bit)
                obj.LibEPANETpath = [pwdDLL,'/'];
                try ENLoadLibrary(obj.LibEPANETpath,obj.LibEPANET,0);
                catch e
                   obj.Errcode=-1;
                   warning(['File "', obj.LibEPANET, '" is not a valid win application.']);return;
                end
            elseif ~strcmpi(arch(1:4),'glnx')
                obj.LibEPANET = 'epanet2';
            end
            if ~isdeployed
                if ~exist(obj.InputFile,'file')
                    warning(['File "', varargin{1}, '" does not exist in folder. (e.g. addpath(genpath(pwd));)']);return;
                end
            end
            %Load EPANET Library
            ENLoadLibrary(obj.LibEPANETpath,obj.LibEPANET);
            %Load parameters
            obj.ToolkitConstants = obj.getToolkitConstants;
            %Open the file
            obj.Errcode=ENopen(obj.InputFile,[obj.InputFile(1:end-4),'.txt'],'',obj.LibEPANET);
            if obj.Errcode~=0
                warning('Could not open the file, please check INP file.');return;
            end
            %Save the temporary input file
            obj.BinTempfile=[obj.InputFile(1:end-4),'_temp.inp'];
            obj.saveInputFile(obj.BinTempfile); %create a new INP file (Working Copy) using the SAVE command of EPANET
            obj.closeNetwork;  %ENclose; %Close input file
            %Load temporary file
            obj.Errcode=ENopen(obj.BinTempfile,[obj.InputFile(1:end-4),'_temp.txt'], [obj.InputFile(1:end-4),'_temp.bin'],obj.LibEPANET);
            if obj.Errcode~=0
                warning('Could not open the file, please check INP file.');return;
            end
            % Hide messages at command window from bin computed
            obj.CMDCODE=1;
            if nargin==2, if strcmpi(varargin{2},'LOADFILE'); return; end;end;
            % Get some link data
            [obj.LinkDiameter,obj.LinkLength,obj.LinkRoughnessCoeff,obj.LinkMinorLossCoeff,obj.LinkInitialStatus,...
            obj.LinkInitialSetting,obj.LinkBulkReactionCoeff,obj.LinkWallReactionCoeff,obj.NodesConnectingLinksIndex,...
            obj.LinkTypeIndex] = obj.getLinksInfo;
            % Get some node data
            [obj.NodeElevations,obj.NodeDemandPatternIndex,obj.NodeEmitterCoeff,obj.NodeInitialQuality,...
            obj.NodeSourceQuality,obj.NodeSourcePatternIndex,obj.NodeSourceTypeIndex,obj.NodeTypeIndex] = obj.getNodesInfo; 
            %Get all the countable network parameters
            obj.NodeCount = obj.getNodeCount;
            obj.NodeTankReservoirCount = obj.getNodeTankReservoirCount;
            obj.LinkCount = obj.getLinkCount;
            obj.PatternCount = obj.getPatternCount;
            obj.CurveCount = obj.getCurveCount;
            obj.ControlRulesCount = obj.getControlRulesCount;
            obj.NodeJunctionCount = obj.NodeCount-obj.NodeTankReservoirCount; %obj.getNodeJunctionCount;
            % Get type of the parameters
            obj.LinkType=obj.TYPELINK(obj.LinkTypeIndex+1); 
            obj.NodeType=obj.TYPENODE(obj.NodeTypeIndex+1);
            %Get all the countable network parameters
            obj.LinkPipeCount = sum(strcmp(obj.LinkType,'PIPE')+strcmp(obj.LinkType,'CVPIPE')); %obj.getLinkPipeCount;
            obj.LinkPumpCount = sum(strcmp(obj.LinkType,'PUMP')); %obj.getLinkPumpCount;
            obj.NodeReservoirCount = sum(strcmp(obj.NodeType,'RESERVOIR')); %obj.getNodeReservoirCount;
            obj.NodeTankCount = obj.NodeCount-obj.NodeJunctionCount-obj.NodeReservoirCount; %obj.getNodeTankCount;
            obj.LinkValveCount = obj.LinkCount-obj.LinkPipeCount-obj.LinkPumpCount;%obj.getLinkValveCount;
            %Get all the controls
            obj.Controls = obj.getControls;
            %Get the flow units
            obj.LinkFlowUnits = obj.getFlowUnits;
            %Get all the link data
            obj.LinkNameID = obj.getLinkNameID;
            obj.LinkIndex = 1:obj.LinkCount;   %obj.getLinkIndex;
            obj.LinkPipeIndex = 1:obj.LinkPipeCount; %find(strcmp(obj.LinkType,'PIPE'));
            obj.LinkPumpIndex = obj.LinkPipeCount+1:obj.LinkPipeCount+obj.LinkPumpCount; %find(strcmp(obj.LinkType,'PUMP'));
            obj.LinkValveIndex = find(obj.LinkTypeIndex>2);
            obj.LinkPipeNameID = obj.LinkNameID(obj.LinkPipeIndex);
            obj.LinkPumpNameID = obj.LinkNameID(obj.LinkPumpIndex);
            obj.LinkValveNameID = obj.LinkNameID(obj.LinkValveIndex);
            %Get all the node data
            obj.NodeNameID = obj.getNodeNameID;
            tmp(:,1)=obj.NodeNameID(obj.NodesConnectingLinksIndex(:,1)');
            tmp(:,2) = obj.NodeNameID(obj.NodesConnectingLinksIndex(:,2)');
            obj.NodesConnectingLinksID=tmp;
            obj.NodeIndex = 1:obj.NodeCount; %obj.getNodeIndex;
            obj.NodeReservoirIndex = find(obj.NodeTypeIndex==1); %find(strcmp(obj.NodeType,'RESERVOIR'));
            obj.NodeTankIndex = find(obj.NodeTypeIndex==2); %find(strcmp(obj.NodeType,'TANK'));
            obj.NodeJunctionIndex = 1:obj.NodeJunctionCount; %find(strcmp(obj.NodeType,'JUNCTION'));
            obj.NodeReservoirNameID=obj.NodeNameID(obj.NodeReservoirIndex);
            obj.NodeTankNameID=obj.NodeNameID(obj.NodeTankIndex);
            obj.NodeJunctionNameID=obj.NodeNameID(obj.NodeJunctionIndex);
            obj.NodePatternIndex=obj.getNodePatternIndex;
            obj.NodeBaseDemands = obj.getNodeBaseDemands;
            %Get all tank data
            obj.NodeTankInitialLevel = obj.getNodeTankInitialLevel;
            obj.NodeTankInitialWaterVolume = obj.getNodeTankInitialWaterVolume;
            obj.NodeTankMixingModelCode = obj.getNodeTankMixingModelCode;
            obj.NodeTankMixingModelType = obj.getNodeTankMixingModelType;
            obj.NodeTankMixZoneVolume = obj.getNodeTankMixZoneVolume;
            obj.NodeTankDiameter = obj.getNodeTankDiameter;
            obj.NodeTankMinimumWaterVolume = obj.getNodeTankMinimumWaterVolume;
            obj.NodeTankVolumeCurveIndex = obj.getNodeTankVolumeCurveIndex;
            obj.NodeTankMinimumWaterLevel = obj.getNodeTankMinimumWaterLevel;
            obj.NodeTankMaximumWaterLevel = obj.getNodeTankMaximumWaterLevel;
            obj.NodeTankMinimumFraction = obj.getNodeTankMinimumFraction;
            obj.NodeTankBulkReactionCoeff = obj.getNodeTankBulkReactionCoeff;
            %Get all options
            obj.OptionsMaxTrials = obj.getOptionsMaxTrials;
            obj.OptionsAccuracyValue = obj.getOptionsAccuracyValue;
            obj.OptionsQualityTolerance = obj.getOptionsQualityTolerance;
            obj.OptionsEmitterExponent = obj.getOptionsEmitterExponent;
            obj.OptionsPatternDemandMultiplier = obj.getOptionsPatternDemandMultiplier;
            %Get pattern data
            obj.PatternNameID = obj.getPatternNameID;
            obj.PatternIndex = 1:obj.PatternCount; %obj.getPatternIndex;
            obj.PatternLengths = obj.getPatternLengths;
            obj.Pattern = obj.getPattern;
            %Get quality types
            obj.QualityCode = obj.getQualityCode;
            obj.QualityTraceNodeIndex = obj.getQualityTraceNodeIndex;
%             obj.QualityType = obj.getQualityType;
            obj.libFunctions = libfunctions(obj.LibEPANET);
            if sum(strcmp(obj.libFunctions,'ENgetqualinfo'))
                n = obj.getQualityInfo;
                obj.QualityChemUnits = n.QualityChemUnits;
                obj.QualityChemName= n.QualityChemName;
            end
            %Get time parameters
            obj.TimeSimulationDuration = obj.getTimeSimulationDuration;
            obj.TimeHydraulicStep = obj.getTimeHydraulicStep;
            obj.TimeQualityStep = obj.getTimeQualityStep;
            obj.TimePatternStep = obj.getTimePatternStep;
            obj.TimePatternStart = obj.getTimePatternStart;
            obj.TimeReportingStep = obj.getTimeReportingStep;
            obj.TimeReportingStart = obj.getTimeReportingStart;
            obj.TimeRuleControlStep = obj.getTimeRuleControlStep;
            obj.TimeStatisticsIndex = obj.getTimeStatisticsIndex;
            obj.TimeStatisticsType = obj.getTimeStatisticsType;
            obj.TimeReportingPeriods = obj.getTimeReportingPeriods;
            % Get EPANET version
            obj.Version = obj.getVersion;
            try%New version dev2.1.dll LibEPANET
                obj.TimeStartTime = obj.getTimeStartTime;
                obj.TimeHTime = obj.getTimeHTime;
                obj.TimeHaltFlag = obj.getTimeHaltFlag;
                obj.TimeNextEvent = obj.getTimeNextEvent;
                obj.NodeTankMaximumWaterVolume = obj.getNodeTankMaximumWaterVolume;
                obj.NodeBaseDemands = obj.getNodeBaseDemands;
                obj.NodeDemandCategoriesNumber = obj.getNodeDemandCategoriesNumber;
                obj.PatternAverageValue = obj.getPatternAverageValue;
                n = obj.getStatistic;
                obj.RelativeError = n.RelativeError;
                obj.Iterations = n.Iterations;
                obj.NodeDemandPatternNameID = obj.getNodeDemandPatternNameID;
                obj.NodeDemandPatternIndex = obj.getNodeDemandPatternIndex;
                obj.LinkPumpHeadCurveIndex = obj.getLinkPumpHeadCurveIndex;
                obj.LinkPumpPatternNameID = obj.getLinkPumpPatternNameID;
                obj.LinkPumpPatternIndex = obj.getLinkPumpPatternIndex;
                obj.LinkPumpTypeCode = obj.getLinkPumpTypeCode;
                obj.LinkPumpType = obj.getLinkPumpType;
                obj.CurvesInfo = obj.getCurvesInfo; % New version dev2.1
            catch
            end
            %Get data from raw file (for information which cannot be
            %accessed by the epanet library)
            value=obj.getNodeCoordinates;
            %Get coordinates
            obj.NodeCoordinates{1} = value{1};
            obj.NodeCoordinates{2} = value{2};
            obj.NodeCoordinates{3} = value{3};
            obj.NodeCoordinates{4} = value{4};
            
            %     US Customary - SI metric
            if find(strcmp(obj.LinkFlowUnits, obj.TYPEUNITS))<6
                obj.Units_US_Customary=1;
            else
                obj.Units_SI_Metric=1;
            end

            if obj.Units_US_Customary==1;
                obj.NodePressureUnits='pounds per square inch';
                obj.PatternDemandsUnits=obj.LinkFlowUnits;
                obj.LinkPipeDiameterUnits='inches';
                obj.NodeTankDiameterUnits='feet';
                obj.EnergyEfficiencyUnits='percent';
                obj.NodeElevationUnits='feet';
                obj.NodeDemandUnits=obj.LinkFlowUnits;
                obj.NodeEmitterCoefficientUnits='flow units @ 1 psi drop';
                obj.EnergyUnits='kwatt-hours';
                obj.LinkFrictionFactorUnits='unitless';
                obj.NodeHeadUnits='feet';
                obj.LinkLengthsUnits='feet';
                obj.LinkMinorLossCoeffUnits='unitless';
                obj.LinkPumpPowerUnits='horsepower';
                obj.QualityReactionCoeffBulkUnits='1/day (1st-order)';
                obj.QualityReactionCoeffWallUnits='mass/sq-ft/day (0-order), ft/day (1st-order)';
                obj.LinkPipeRoughnessCoeffUnits='millifeet(Darcy-Weisbach), unitless otherwise';
                obj.QualitySourceMassInjectionUnits='mass/minute';
                obj.LinkVelocityUnits='ft/sec';
                obj.NodeTankVolumeUnits='cubic feet';
                obj.QualityWaterAgeUnits='hours';
            else % SI Metric
                obj.NodePressureUnits='meters';
                obj.PatternDemandsUnits=obj.LinkFlowUnits;
                obj.LinkPipeDiameterUnits='millimeters';
                obj.NodeTankDiameterUnits='meters';
                obj.EnergyEfficiencyUnits='percent';
                obj.NodeElevationUnits='meters';
                obj.NodeDemandUnits=obj.LinkFlowUnits;
                obj.NodeEmitterCoefficientUnits='flow units @ 1 meter drop';
                obj.EnergyUnits='kwatt-hours';
                obj.LinkFrictionFactorUnits='unitless';
                obj.NodeHeadUnits='meters';
                obj.LinkLengthsUnits='meters';
                obj.LinkMinorLossCoeffUnits='unitless';
                obj.LinkPumpPowerUnits='kwatts';
                obj.QualityReactionCoeffBulkUnits='1/day (1st-order)';
                obj.QualityReactionCoeffWallUnits='mass/sq-m/day(0-order), meters/day (1st-order)';
                obj.LinkPipeRoughnessCoeffUnits='mm(Darcy-Weisbach), unitless otherwise';
                obj.QualitySourceMassInjectionUnits='mass/minute';
                obj.LinkVelocityUnits='meters/sec';
                obj.NodeTankVolumeUnits='cubic meters';
                obj.QualityWaterAgeUnits='hours';
            end
            
        end % End of epanet class constructor
        function Errcode = loadEPANETFile(obj,varargin)
            if nargin==2
                [Errcode] = ENopen(varargin{1},[varargin{1}(1:end-4),'.txt'],[varargin{1}(1:end-4),'.bin'],obj.LibEPANET); 
            else
                [Errcode] = ENopen(varargin{1},varargin{2},varargin{3},obj.LibEPANET); 
            end
        end
        function [value] = plot(obj,varargin)
            %Plots network in a new Matlab figure
            %Arguments:
            % 'nodes': yes/no
            % 'links': yes/no
            % 'line' : yes/no
            % 'point': yes/no
            % 'highlightnode': array of node IDs
            % 'highlightlink': array of link IDs
            % 'fontsize': number (px)
            % 'colornode': array of node IDs
            % 'colorlink': array of link id
            % 'axes': axes coordinates
            % 'linksindex': yes
            % 'nodesindex': yes
            % Example:
            % d.plot('nodes','yes','links','yes','highlightnode',{'10','11'},'highlightlink',{'10'},'fontsize',8);
            % d.plot('line','no');
            % d.plot('point','no','linksindex','yes');
            % d.plot('linksindex','yes','fontsize',8);
            % d.plot('nodesindex','yes','fontsize',14);
            [value] = ENplot(obj,'bin',0,varargin{:});
        end
        function value = getControls(obj)
            %Retrieves the parameters of all control statements
            value={};
            cnt=obj.getControlRulesCount;
            if cnt
                obj.ControlTypes{cnt}=[];
                obj.ControlTypesIndex(cnt)=NaN;
                obj.ControlLinkIndex(cnt)=NaN;
                obj.ControlSettings(cnt)=NaN;
                obj.ControlNodeIndex(cnt)=NaN;
                obj.ControlLevelValues(cnt)=NaN;
                for i=1:cnt
                    [obj.Errcode, obj.ControlTypesIndex(i),obj.ControlLinkIndex(i),obj.ControlSettings(i),obj.ControlNodeIndex(i),obj.ControlLevelValues(i)] = ENgetcontrol(i,obj.LibEPANET);
                    obj.ControlTypes(i)={obj.TYPECONTROL(obj.ControlTypesIndex(i)+1)};
                    value{i}={obj.ControlTypes{i},obj.ControlTypesIndex(i),obj.ControlLinkIndex(i),obj.ControlSettings(i),obj.ControlNodeIndex(i),obj.ControlLevelValues(i)};
                end
            end
        end
%         function value = getRules(obj)
%             value={};
%             cnt=obj.getRuleCount;
%             if cnt
%                 obj.RulePremises(cnt)=NaN;
%                 obj.RuleTrueActions(cnt)=NaN;
%                 obj.RuleFalseActions(cnt)=NaN;
%                 obj.RulePriority(cnt)=NaN;
%                 for i=1:cnt
%                     [obj.Errcode, obj.RulePremises(i), obj.RuleTrueActions(i), obj.RuleFalseActions(i), obj.RulePriority(i)] = ENgetrule(i, obj.LibEPANET);
%                     value{i}={obj.RulePremises(i), obj.RuleTrueActions(i),obj.RuleFalseActions(i),obj.RulePriority(i)};
%                 end
%             end
%         end
        function value = getNodeCount(obj)
            % Retrieves the number of nodes
            [obj.Errcode, value] = ENgetcount(obj.ToolkitConstants.EN_NODECOUNT,obj.LibEPANET);
        end
        function value = getNodeTankReservoirCount(obj)
            % Retrieves the number of tanks
            [obj.Errcode, value] = ENgetcount(obj.ToolkitConstants.EN_TANKCOUNT,obj.LibEPANET);
        end
        function value = getLinkCount(obj)
            % Retrieves the number of links
            [obj.Errcode, value] = ENgetcount(obj.ToolkitConstants.EN_LINKCOUNT,obj.LibEPANET);
        end
        function value = getPatternCount(obj)
            % Retrieves the number of patterns
            [obj.Errcode, value] = ENgetcount(obj.ToolkitConstants.EN_PATCOUNT,obj.LibEPANET);
        end
        function value = getCurveCount(obj)
            % Retrieves the number of curves
            [obj.Errcode, value] = ENgetcount(obj.ToolkitConstants.EN_CURVECOUNT,obj.LibEPANET);
        end
        function value = getControlRulesCount(obj)
            % Retrieves the number of controls
            [obj.Errcode, value] = ENgetcount(obj.ToolkitConstants.EN_CONTROLCOUNT,obj.LibEPANET);
        end
%         function value = getRuleCount(obj)
%             % Retrieves the number of rules
%             [obj.Errcode, value] = ENgetcount(obj.ToolkitConstants.EN_RULECOUNT,obj.LibEPANET);
%         end
        function value = getNodeTankCount(obj)
            % Retrieves the number of Tanks
            value = sum(strcmp(obj.getNodeType,'TANK'));
        end
        function value = getNodeReservoirCount(obj)
            % Retrieves the number of Reservoirs
            value = sum(strcmp(obj.getNodeType,'RESERVOIR'));
        end
        function value = getNodeJunctionCount(obj)
            % Retrieves the number of junction nodes
            value = obj.getNodeCount - obj.getNodeTankReservoirCount;
        end
        function value = getLinkPipeCount(obj)
            % Retrieves the number of pipes
            LinkType1=obj.getLinkType;
            value = sum(strcmp(LinkType1,'PIPE')+strcmp(LinkType1,'CVPIPE'));
        end
        function value = getLinkPumpCount(obj)
            % Retrieves the number of pumps
            value = sum(strcmp(obj.getLinkType,'PUMP'));
        end
        function value = getLinkValveCount(obj)
            % Retrieves the number of valves
            LinkType1=obj.getLinkType;
            pipepump = sum(strcmp(LinkType1,'PIPE')+strcmp(LinkType1,'CVPIPE')+strcmp(LinkType1,'PUMP'));
            value = obj.getLinkCount - pipepump;
        end
        function [errmssg, Errcode] = getError(obj,Errcode)
            %Retrieves the text of the message associated with a particular error or warning code.
            [errmssg , Errcode] = ENgeterror(Errcode,obj.LibEPANET);
        end
        function value = getFlowUnits(obj)
            %Retrieves flow units used to express all flow rates.
            [obj.Errcode, flowunitsindex] = ENgetflowunits(obj.LibEPANET);
            value=obj.TYPEUNITS(flowunitsindex+1);
        end
        function value = getLinkNameID(obj,varargin)
            % Retrieves the ID label(s) of all links, or the IDs of an index set of links
            if isempty(varargin)
                value{obj.getLinkCount}=[];
                for i=1:obj.getLinkCount
                    [obj.Errcode, value{i}]=ENgetlinkid(i,obj.LibEPANET);
                end
            else
                k=1;
                if isempty(varargin{1}), varargin{1}=0; end
                for i=varargin{1}
                    [obj.Errcode, value{k}]=ENgetlinkid(i,obj.LibEPANET);
                    if obj.Errcode==204, value=[];  return; end   
                    k=k+1;
                end
            end
        end
        function value = getLinkPipeNameID(obj)
            %Retrieves the pipe id
            value=obj.getLinkNameID(obj.getLinkPipeIndex);
        end
        function value = getLinkPumpNameID(obj)
            %Retrieves the pump id
            value=obj.getLinkNameID(obj.getLinkPumpIndex);
        end
        function value = getLinkValveNameID(obj)
            %Retrieves the valve id
            value=obj.getLinkNameID(obj.getLinkValveIndex);
        end
        function value = getLinkIndex(obj,varargin)
            %Retrieves the indices of all links, or the indices of an ID set of links
            if isempty(varargin)
                value=1:obj.getLinkCount;
            elseif isa(varargin{1},'cell')
                k=1;
                for j=1:length(varargin{1})
                    [obj.Errcode, value(k)] = ENgetlinkindex(varargin{1}{j},obj.LibEPANET);
                    k=k+1;
                end
            elseif isa(varargin{1},'char')
                [obj.Errcode, value] = ENgetlinkindex(varargin{1},obj.LibEPANET);
            end
        end
        function value = getLinkPipeIndex(obj)
            %Retrieves the pipe indices
            tmpLinkTypes=obj.getLinkType;
            value = find(strcmp(tmpLinkTypes,'PIPE'));
        end
        function value = getLinkPumpIndex(obj, varargin)
            %Retrieves the pump indices
            tmpLinkTypes=obj.getLinkType;
            value = find(strcmp(tmpLinkTypes,'PUMP'));
            if ~isempty(varargin)
                value = value(varargin{1});
            end
        end
        function value = getLinkValveIndex(obj)
            %Retrieves the valve indices
            value = obj.getLinkPipeCount+obj.getLinkPumpCount+1:obj.getLinkCount;
        end
        function value = getLinkNodesIndex(obj)
            %Retrieves the indexes of the from/to nodes of all links.
            value(obj.getLinkCount,1:2)=[nan nan];
            for i=1:obj.getLinkCount
                [obj.Errcode,linkFromNode,linkToNode] = ENgetlinknodes(i,obj.LibEPANET);
                value(i,:)= [linkFromNode,linkToNode];
            end
        end
        function value = getNodesConnectingLinksID(obj)
            %Retrieves the id of the from/to nodes of all links.
            value={};
            obj.NodesConnectingLinksIndex=obj.getLinkNodesIndex;
            if obj.getLinkCount
                value(:,1)=obj.getNodeNameID(obj.NodesConnectingLinksIndex(:,1)');
                value(:,2)=obj.getNodeNameID(obj.NodesConnectingLinksIndex(:,2)');
            end
        end
        function value = getLinkType(obj, varargin)
            %Retrieves the link-type code for all links.
            if ~isempty(varargin), varargin=varargin{1}; end
            value=obj.TYPELINK(obj.getLinkTypeIndex(varargin)+1);
        end
        function value = getLinkTypeIndex(obj, varargin)
            %Retrieves the link-type code for all links.
            indices = getLinkIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode,value(j)] = ENgetlinktype(i,obj.LibEPANET);  
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end  
                j=j+1;
            end
        end
        function [LinkDiameter,LinkLength,LinkRoughnessCoeff,LinkMinorLossCoeff,LinkInitialStatus,...
                LinkInitialSetting,LinkBulkReactionCoeff,LinkWallReactionCoeff,NodesConnectingLinksIndex,...
                LinkTypeIndex] = getLinksInfo(obj)
            for i=1:obj.getLinkCount
                [~, LinkDiameter(i)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_DIAMETER,obj.LibEPANET);
                [~, LinkLength(i)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_LENGTH,obj.LibEPANET);
                [~, LinkRoughnessCoeff(i)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_ROUGHNESS,obj.LibEPANET);
                [~, LinkMinorLossCoeff(i)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_MINORLOSS,obj.LibEPANET);
                [~, LinkInitialStatus(i)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_INITSTATUS,obj.LibEPANET);
                [~, LinkInitialSetting(i)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_INITSETTING,obj.LibEPANET);
                [~, LinkBulkReactionCoeff(i)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_KBULK,obj.LibEPANET);
                [~, LinkWallReactionCoeff(i)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_KWALL,obj.LibEPANET);
                [~,NodesConnectingLinksIndex(i,1),NodesConnectingLinksIndex(i,2)] = ENgetlinknodes(i,obj.LibEPANET);
                [~,LinkTypeIndex(i)] = ENgetlinktype(i,obj.LibEPANET);
            end
        end
        function value = getLinkDiameter(obj, varargin)
            indices = getLinkIndices(obj,varargin);j=1;
            %Retrieves the value of all link diameters
            for i=indices
                [obj.Errcode, value(j)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_DIAMETER,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getLinkLength(obj, varargin)
            %Retrieves the value of all link lengths
            indices = getLinkIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_LENGTH,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end 
                j=j+1;
            end
        end
        function value = getLinkRoughnessCoeff(obj, varargin)
            %Retrieves the value of all link roughness
            indices = getLinkIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_ROUGHNESS,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getLinkMinorLossCoeff(obj, varargin)
            %Retrieves the value of all link minor loss coefficients
            indices = getLinkIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_MINORLOSS,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getLinkInitialStatus(obj, varargin)
            %Retrieves the value of all link initial status
            indices = getLinkIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_INITSTATUS,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getLinkInitialSetting(obj, varargin)
            %Retrieves the value of all link roughness for pipes or initial speed for pumps or initial setting for valves
            indices = getLinkIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_INITSETTING,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getLinkBulkReactionCoeff(obj, varargin)
            %Retrieves the value of all link bulk reaction coefficients
            value=[];
            indices = getLinkIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_KBULK,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getLinkWallReactionCoeff(obj, varargin)
            %Retrieves the value of all link wall reaction coefficients
            indices = getLinkIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_KWALL,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getLinkFlows(obj, varargin)
            %Retrieves the value of all computed link flow rates
            indices = getLinkIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_FLOW,obj.LibEPANET);  
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getLinkVelocity(obj, varargin)
            %Retrieves the value of all computed link velocities
            indices = getLinkIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_VELOCITY,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getLinkHeadloss(obj, varargin)
            %Retrieves the value of all computed link headloss
            value=[];
            indices = getLinkIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_HEADLOSS,obj.LibEPANET);  
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getLinkStatus(obj, varargin)
            %Retrieves the value of all computed link status (0 = closed, 1 = open)
            indices = getLinkIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_STATUS,obj.LibEPANET);  
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getLinkSettings(obj, varargin)
            %Retrieves the value of all computed link roughness for pipes or actual speed for pumps or actual setting for valves
            indices = getLinkIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_SETTING,obj.LibEPANET);  
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getLinkEnergy(obj, varargin)
            %Retrieves the value of all computed energy in kwatts
            indices = getLinkIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_ENERGY,obj.LibEPANET);  
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getLinkQuality(obj, varargin)
            %New version dev2.1
            indices = getLinkIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_LINKQUAL,obj.LibEPANET);  
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getLinkEfficiency(obj, varargin)
            %New version
            indices = getLinkIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_EFFICIENCY,obj.LibEPANET);  
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getLinkPumpPatternIndex(obj)
            %New version dev2.1
            value=zeros(1,obj.getLinkPumpCount);v=1;
            for i=obj.getLinkPumpIndex
                [obj.Errcode, value(v)] = ENgetlinkvalue(i,obj.ToolkitConstants.EN_LINKPATTERN,obj.LibEPANET);
                v=v+1;
            end
        end
        function value = getLinkPumpPatternNameID(obj)
            %New version dev2.1
            v = obj.getLinkPumpPatternIndex;
            value = obj.getPatternNameID(v);
        end
        function value = getNodeNameID(obj,varargin)
            %Retrieves the ID label of all nodes or some nodes with a specified index.
            if isempty(varargin)
                value{obj.getNodeCount}=[];
                for i=1:obj.getNodeCount
                    [obj.Errcode, value{i}]=ENgetnodeid(i,obj.LibEPANET);
                end
            else
                if isempty(varargin{1}), varargin{1}=0; end
                k=1;
                for i=varargin{1}
                    [obj.Errcode, value{k}]=ENgetnodeid(i,obj.LibEPANET);
                    if obj.Errcode==203, value=[]; return; end   
                    k=k+1;
                end
            end
        end
        function value = getNodeReservoirNameID(obj)
            %Retrieves the reservoir id
            value=obj.getNodeNameID(obj.getNodeReservoirIndex);
        end
        function value = getNodeJunctionNameID(obj)
            %Retrieves the junction id
            value=obj.getNodeNameID(obj.getNodeJunctionIndex);
        end
        function value = getNodeIndex(obj,varargin)
            %Retrieves the indices of all nodes or some nodes with a specified ID
            if isempty(varargin)
                value=1:obj.getNodeCount;
            elseif isa(varargin{1},'cell')
                k=1;
                for j=1:length(varargin{1})
                    [obj.Errcode, value(k)] = ENgetnodeindex(varargin{1}{j},obj.LibEPANET);
                    k=k+1;
                end
            elseif isa(varargin{1},'char')
                [obj.Errcode, value] = ENgetnodeindex(varargin{1},obj.LibEPANET);
            end
        end
        function value = getNodeReservoirIndex(obj)
            %Retrieves the indices of reservoirs
            tmpNodeTypes=obj.getNodeType;
            value = find(strcmp(tmpNodeTypes,'RESERVOIR'));
        end
        function value = getNodeJunctionIndex(obj)
            %Retrieves the indices of junctions
            tmpNodeTypes=obj.getNodeType;
            value = find(strcmp(tmpNodeTypes,'JUNCTION'));
        end
        function value = getNodeType(obj, varargin)
            %Retrieves the node-type code for all nodes
            indices = getNodeIndices(obj,varargin);
            value=obj.TYPENODE(obj.getNodeTypeIndex(indices)+1);
        end
        function value = getNodeTypeIndex(obj, varargin)
            %Retrieves the node-type code for all nodes
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode,value(j)] = ENgetnodetype(i,obj.LibEPANET);  
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end  
                j=j+1;
            end
        end
        function [NodeElevations,NodeDemandPatternIndex,NodeEmitterCoeff,NodeInitialQuality,...
                NodeSourceQuality,NodeSourcePatternIndex,NodeSourceTypeIndex,NodeTypeIndex] = getNodesInfo(obj)
            for i=1:obj.getNodeCount
                [~, NodeElevations(i)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_ELEVATION,obj.LibEPANET);
                [~, NodeDemandPatternIndex(i)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_PATTERN,obj.LibEPANET);
                [~, NodeEmitterCoeff(i)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_EMITTER,obj.LibEPANET);
                [~, NodeInitialQuality(i)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_INITQUAL,obj.LibEPANET);
                [~, NodeSourceQuality(i)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_SOURCEQUAL,obj.LibEPANET);
                [~, NodeSourcePatternIndex(i)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_SOURCEPAT,obj.LibEPANET);
                [~, NodeSourceTypeIndex(i)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_SOURCETYPE,obj.LibEPANET);
                [~, NodeTypeIndex(i)] = ENgetnodetype(i,obj.LibEPANET);
            end
        end
        function value = getNodeElevations(obj, varargin)
            %Retrieves the value of all node elevations
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_ELEVATION,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeBaseDemands(obj, varargin)
            %New version dev2.1
            if sum(strcmp(obj.libFunctions,'ENgetbasedemand'))
                numdemands = obj.getNodeDemandCategoriesNumber;
                val=zeros(max(numdemands),obj.getNodeCount);
                for i=obj.getNodeIndex
                    v=1;
                    for u=1:numdemands(i)
                        [obj.Errcode, val(v,i)] = ENgetbasedemand(i,u,obj.LibEPANET);v=v+1;
                    end
                end
                for i=1:size(val,1)
                    value{i} = val(i,:);
                end
            else%version epanet20012
                %Retrieves the value of all node base demands
                indices = getNodeIndices(obj,varargin);j=1;
                for i=indices
                    [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_BASEDEMAND,obj.LibEPANET); 
                    if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                    j=j+1;
                end   
            end
        end
        function value = getNodeDemandCategoriesNumber(obj, varargin)
            %New version dev2.1
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnumdemands(i,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeDemandPatternIndex(obj)
            %New version dev2.1
            numdemands = obj.getNodeDemandCategoriesNumber;
            val=zeros(max(numdemands),obj.getNodeCount);
            for i=obj.getNodeIndex
                v=1;
                for u=1:numdemands(i)
                    [obj.Errcode, val(v,i)] = ENgetdemandpattern(i,u,obj.LibEPANET);v=v+1;
                end             
            end
            for i=1:size(val,1)
                value{i} = val(i,:);
            end
        end
        function value = getNodeDemandPatternNameID(obj, varargin)
            %New version dev2.1
            value={};
            v = obj.getNodeDemandPatternIndex;
            m = obj.getPatternNameID;
            if ~isempty(varargin)
                numdemands = obj.getNodeDemandCategoriesNumber(varargin{1});
            else
                numdemands = obj.getNodeDemandCategoriesNumber;
            end
            indices = getNodeIndices(obj,varargin);
            for i=indices
                for u=1:numdemands(i)
                    if v{u}(i)~=0 
                        val{u,i}= char(m(v{u}(i))); 
                    else
                        val{u,i}= '';
                    end
                end
                if numdemands(i)==0
                    val{1,i}= [];
                end
            end
            for i=1:size(val,1)
                value{i} = val(i,:);
            end
        end
        function value = getStatistic(obj)
            %New version dev2.1
            %Input: none
            %Output: *iter = # of iterations to reach solution
            %*relerr = convergence error in solution
            %returns error code
            [obj.Errcode, value.Iterations] = ENgetstatistic(obj.ToolkitConstants.EN_ITERATIONS,obj.LibEPANET);
            [obj.Errcode, value.RelativeError] = ENgetstatistic(obj.ToolkitConstants.EN_RELATIVEERROR,obj.LibEPANET);
        end    
        function value = getNodePatternIndex(obj, varargin)
            %Retrieves the value of all node demand pattern indices
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_PATTERN,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeEmitterCoeff(obj, varargin)
            %Retrieves the value of all node emmitter coefficients
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_EMITTER,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeInitialQuality(obj, varargin)
            %Retrieves the value of all node initial quality
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_INITQUAL,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeSourceQuality(obj, varargin)
            %Retrieves the value of all nodes source quality
            indices = getNodeIndices(obj,varargin);j=1;
            value = zeros(1, length(indices));
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_SOURCEQUAL,obj.LibEPANET); 
                if isnan(value(j)), value(j)=0; end
                if obj.Errcode==203, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeSourcePatternIndex(obj, varargin)
            %Retrieves the value of all node source pattern index
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_SOURCEPAT,obj.LibEPANET); 
                if obj.Errcode==203, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeSourceTypeIndex(obj, varargin)
            %Retrieves the value of all node source index
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_SOURCETYPE,obj.LibEPANET); 
                if obj.Errcode==203, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeSourceType(obj, varargin)
            %Retrieves the value of all node source type
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, temp] = ENgetnodevalue(i,obj.ToolkitConstants.EN_SOURCETYPE,obj.LibEPANET);
                if obj.Errcode==203, error(obj.getError(obj.Errcode)), return; end   
                if ~isnan(temp)
                    value(j)=obj.TYPESOURCE(temp+1);
                else
                    value{j}=[];
                end
                j=j+1;
            end
        end
        function value = getNodeTankInitialLevel(obj, varargin)
            %Retrieves the value of all tank initial water levels
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_TANKLEVEL,obj.LibEPANET); 
                if obj.Errcode==251, value(j)=NaN; end
                if obj.Errcode==203, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeActualDemand(obj, varargin)
            %Retrieves the computed value of all actual demands
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_DEMAND,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeActualDemandSensingNodes(obj, varargin)
            %Retrieves the computed demand values at some sensing nodes
            value=zeros(1,length(varargin{1}));v=1;
            for i=varargin{1}
                [obj.Errcode, value(v)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_DEMAND,obj.LibEPANET);v=v+1;
            end
        end
        function value = getNodeHydaulicHead(obj, varargin)
            %Retrieves the computed values of all hydraulic heads
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_HEAD,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodePressure(obj, varargin)
            %Retrieves the computed values of all node pressures
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_PRESSURE,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeActualQuality(obj, varargin)
            %Retrieves the computed values of the actual quality for all nodes
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_QUALITY,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeMassFlowRate(obj, varargin)
            %Retrieves the computed mass flow rates per minute of chemical sources
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_SOURCEMASS,obj.LibEPANET); 
                j=j+1;
            end
        end
        function value = getNodeActualQualitySensingNodes(obj,varargin)
            %Retrieves the computed quality values at some sensing nodes
            value=zeros(1,length(varargin{1}));v=1;
            for i=varargin{1}
                [obj.Errcode, value(v)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_QUALITY,obj.LibEPANET);v=v+1;
            end
        end
        function value = getNodeTankInitialWaterVolume(obj, varargin)
            %Retrieves the tank initial volume
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_INITVOLUME,obj.LibEPANET); 
                if obj.Errcode==251, value(j)=NaN; end
                if obj.Errcode==203, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeTankMixiningModel(obj)
            %Retrieves the tank mixing mode (mix1, mix2, fifo, lifo)
            obj.NodeTankInitialWaterVolume=nan(1,obj.getNodeCount);
            obj.NodeTankMixingModelCode=nan(1,obj.getNodeCount);
            obj.NodeTankMixingModelType={};
            if obj.getNodeTankCount
                for i=obj.getNodeTankIndex
                    [obj.Errcode, obj.NodeTankMixingModelCode(i)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_MIXMODEL,obj.LibEPANET);
                    obj.NodeTankMixingModelType(i)=obj.TYPEMIXMODEL(obj.NodeTankMixingModelCode(i)+1);
                end
            end
            value={obj.NodeTankMixingModelCode obj.NodeTankMixingModelType};
        end
        function value = getNodeTankMixingModelCode(obj)
            %Retrieves the tank mixing model code (mix1, mix2, fifo, lifo)
            value = obj.getNodeTankMixiningModel{1};
        end
        function value = getNodeTankMixingModelType(obj)
            %Retrieves the tank mixing model type (mix1, mix2, fifo, lifo)
            value = obj.getNodeTankMixiningModel{2};
        end
        function value = getNodeTankMixZoneVolume(obj, varargin)
            %Retrieves the tank mixing zone volume
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_MIXZONEVOL,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeTankDiameter(obj, varargin)
            %Retrieves the tank diameters
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_TANKDIAM,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeTankMinimumWaterVolume(obj, varargin)
            %Retrieves the tank minimum volume
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_MINVOLUME,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeTankVolumeCurveIndex(obj, varargin)
            %Retrieves the tank volume curve index
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_VOLCURVE,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeTankMinimumWaterLevel(obj, varargin)
            %Retrieves the tank minimum water level
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_MINLEVEL,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeTankMaximumWaterLevel(obj, varargin)
            %Retrieves the tank maximum water level
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_MAXLEVEL,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeTankMinimumFraction(obj, varargin)
            %Retrieves the tank Fraction of total volume occupied by the inlet/outlet zone in a 2-compartment tank
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_MIXFRACTION,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeTankBulkReactionCoeff(obj, varargin)
            %Retrieves the tank bulk rate coefficient
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_TANK_KBULK,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeTankVolume(obj, varargin)
            %New version dev2.1
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_TANKVOLUME,obj.LibEPANET); 
                if obj.Errcode==251, value(j)=NaN; end
                if obj.Errcode==203, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeTankMaximumWaterVolume(obj, varargin)
            %New version dev2.1
            indices = getNodeIndices(obj,varargin);j=1;
            for i=indices
                [obj.Errcode, value(j)] = ENgetnodevalue(i,obj.ToolkitConstants.EN_MAXVOLUME,obj.LibEPANET); 
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                j=j+1;
            end
        end
        function value = getNodeTankIndex(obj)
            %Retrieves the tank index
            tmpNodeTypes=obj.getNodeType;
            value = find(strcmp(tmpNodeTypes,'TANK'));
        end
        function value = getNodeTankNameID(obj)
            %Retrieves the tank id
            value=obj.getNodeNameID(obj.getNodeTankIndex);
        end
        function value = getOptionsMaxTrials(obj)
            % Retrieve maximum number of analysis trials
            [obj.Errcode, value] = ENgetoption(obj.ToolkitConstants.EN_TRIALS,obj.LibEPANET);
        end
        function value = getOptionsAccuracyValue(obj)
            % Retrieve the analysis convergence criterion (0.001)
            [obj.Errcode, value] = ENgetoption(obj.ToolkitConstants.EN_ACCURACY,obj.LibEPANET);
        end
        function value = getOptionsQualityTolerance(obj)
            % Retrieve the water quality analysis tolerance
            [obj.Errcode, value] = ENgetoption(obj.ToolkitConstants.EN_TOLERANCE,obj.LibEPANET);
        end
        function value = getOptionsEmitterExponent(obj)
            % Retrieve power exponent for the emmitters (0.5)
            [obj.Errcode, value] = ENgetoption(obj.ToolkitConstants.EN_EMITEXPON,obj.LibEPANET);
        end
        function value = getOptionsPatternDemandMultiplier(obj)
            % Retrieve the demand multiplier (x1)
            [obj.Errcode, value] = ENgetoption(obj.ToolkitConstants.EN_DEMANDMULT,obj.LibEPANET);
        end
        function value = getPatternNameID(obj,varargin)
            %Retrieves the ID label of all or some time patterns indices
            value={};
            if obj.getPatternCount
                if isempty(varargin) 
                    value{obj.getPatternCount}=[];
                    for i=1:obj.getPatternCount
                        [obj.Errcode, value{i}]=ENgetpatternid(i,obj.LibEPANET);
                    end
                else
                    k=1;
                    for i=varargin{1}
                        [obj.Errcode, value{k}]=ENgetpatternid(i,obj.LibEPANET);
    %                     if obj.Errcode==205, error(obj.getError(obj.Errcode)), return; end   
                        k=k+1;
                    end
                end
            end
        end
        function value = getCurveNameID(obj,varargin)
            %Retrieves ID of a curve with specific index
            %New version dev2.1
            if obj.getCurveCount
                if isempty(varargin) 
                    value{obj.getCurveCount}=[];
                    for i=1:obj.getCurveCount
                        [obj.Errcode, value{i}]=ENgetcurveid(i,obj.LibEPANET);
                    end
                else
                    k=1;
                    for i=varargin{1}
                        [obj.Errcode, value{k}]=ENgetcurveid(i,obj.LibEPANET);
                        if obj.Errcode==206, error('Input Error 205: function call  refers to undefined curve.'), return; end   
                        k=k+1;
                    end
                end
            end
        end
        function value = getCurveLengths(obj,varargin)
            %Retrieves number of points in a curve 
            %New version dev2.1
            if isempty(varargin)
                tmpCurves=1:obj.getCurveCount;
                for i=tmpCurves
                    [obj.Errcode, value(i)]=ENgetcurvelen(i,obj.LibEPANET);
                end
            elseif isa(varargin{1},'cell')
                k=1;
                for j=1:length(varargin{1})
                    [obj.Errcode, value(k)] = ENgetcurvelen(obj.getCurveIndex(varargin{1}{j}),obj.LibEPANET);
                    k=k+1;
                end
            elseif isa(varargin{1},'char')
                [obj.Errcode, value] = ENgetcurvelen(obj.getCurveIndex(varargin{1}),obj.LibEPANET);
            elseif isa(varargin{1},'numeric')
                k=1;
                for i=varargin{1}
                    [obj.Errcode, value(k)]=ENgetcurvelen(i,obj.LibEPANET);
                    k=k+1;
                end
            end
        end
        function value = getCurveIndex(obj,varargin)
            %Retrieves index of curve with specific ID
            %New version dev2.1
            if isempty(varargin)
                value=1:obj.getCurveCount;
            elseif isa(varargin{1},'cell')
                k=1;
                value{length(varargin{1})}=[];
                for j=1:length(varargin{1})
                    [obj.Errcode, value(k)] = ENgetcurveindex(varargin{1}{j},obj.LibEPANET);
                    k=k+1;
                end
            elseif isa(varargin{1},'char')
                [obj.Errcode, value] = ENgetcurveindex(varargin{1},obj.LibEPANET);
            end
        end
        function setCurve(obj,index,curveVector)
            %Sets x,y values for a specific curve
            %New version dev2.1
            nfactors=size(curveVector,1);%x = number of points in curve
            [obj.Errcode] = ENsetcurve(index, curveVector(:,1), curveVector(:,2), nfactors,obj.LibEPANET);
        end
        function setCurveValue(obj,index, curvePnt, value)
            %Retrieves x,y point for a specific point number and curve
            %New version dev2.1
            x=value(1); y=value(2);
            [obj.Errcode] = ENsetcurvevalue(index, curvePnt, x, y, obj.LibEPANET);
        end
        function value = getPatternIndex(obj,varargin)
            %Retrieves the index of all or some time patterns IDs
            if isempty(varargin)
                value=1:obj.getPatternCount;
            elseif isa(varargin{1},'cell')
                k=1;
                value{length(varargin{1})}=[];
                for j=1:length(varargin{1})
                    [obj.Errcode, value(k)] = ENgetpatternindex(varargin{1}{j},obj.LibEPANET);
                    k=k+1;
                end
            elseif isa(varargin{1},'char')
                [obj.Errcode, value] = ENgetpatternindex(varargin{1},obj.LibEPANET);
            end
        end
        function value = getPatternLengths(obj,varargin)
            %Retrieves the number of time periods in all or some patterns
            if isempty(varargin)
                tmpPatterns=1:obj.getPatternCount;
                for i=tmpPatterns
                    [obj.Errcode, value(i)]=ENgetpatternlen(i,obj.LibEPANET);
                end
            elseif isa(varargin{1},'cell')
                k=1;
                for j=1:length(varargin{1})
                    [obj.Errcode, value(k)] = ENgetpatternlen(obj.getPatternIndex(varargin{1}{j}),obj.LibEPANET);
                    k=k+1;
                end
            elseif isa(varargin{1},'char')
                [obj.Errcode, value] = ENgetpatternlen(obj.getPatternIndex(varargin{1}),obj.LibEPANET);
            elseif isa(varargin{1},'numeric')
                k=1;
                for i=varargin{1}
                    [obj.Errcode, value(k)]=ENgetpatternlen(i,obj.LibEPANET);
                    k=k+1;
                end
            end
        end
        function value = getPattern(obj)
            %Retrieves the multiplier factor for all patterns and all times
            tmpmaxlen=max(obj.getPatternLengths);
            value=nan(obj.getPatternCount,tmpmaxlen);
            for i=1:obj.getPatternCount
                tmplength=obj.getPatternLengths(i);
                for j=1:tmplength
                    [obj.Errcode, value(i,j)] = ENgetpatternvalue(i, j,obj.LibEPANET);
                end
                if tmplength<tmpmaxlen
                    for j=(tmplength+1):tmpmaxlen
                        value(i,j)=value(i,j-tmplength);
                    end
                end
                
            end
        end
        function value = getPatternValue(obj,patternIndex, patternStep)
            %Retrieves the multiplier factor for a certain pattern and time
            [obj.Errcode, value] = ENgetpatternvalue(patternIndex, patternStep,obj.LibEPANET);
        end
        function value = getQualityType(obj,varargin)
            %Retrieves the type of water quality analysis type
%             [obj.Errcode, obj.QualityCode,obj.QualityTraceNodeIndex] = ENgetqualinfo(obj.LibEPANET); % bug
%             value=obj.TYPEQUALITY(obj.QualityCode+1);
            obj.saveInputFile(obj.BinTempfile);
            value = obj.getBinQualType;
%             value = {obj.getBinOptionsInfo.BinQualityType};
        end 
        function value = getQualityInfo(obj)
            [obj.Errcode, ~,value.QualityChemName,value.QualityChemUnits,~] = ENgetqualinfo(obj.LibEPANET);
        end
        function value = getQualityCode(obj)
            %Retrieves the code of water quality analysis type
            [obj.Errcode, value,obj.QualityTraceNodeIndex] = ENgetqualtype(obj.LibEPANET);
        end
        function value = getQualityTraceNodeIndex(obj)
            %Retrieves the trace node index of water quality analysis type
            [obj.Errcode, obj.QualityCode,value] = ENgetqualtype(obj.LibEPANET);
        end
        function value = getTimeSimulationDuration(obj)
            %Retrieves the value of simulation duration
            [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_DURATION,obj.LibEPANET);
        end
        function value = getTimeHydraulicStep(obj)
            %Retrieves the value of the hydraulic time step
            [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_HYDSTEP,obj.LibEPANET);
        end
        function value = getTimeQualityStep(obj)
            %Retrieves the value of the water quality time step
            [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_QUALSTEP,obj.LibEPANET);
        end
        function value = getTimePatternStep(obj)
            %Retrieves the value of the pattern time step
            [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_PATTERNSTEP,obj.LibEPANET);
        end
        function value = getTimePatternStart(obj)
            %Retrieves the value of pattern start time
            [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_PATTERNSTART,obj.LibEPANET);
        end
        function value = getTimeReportingStep(obj)
            %Retrieves the value of the reporting time step
            [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_REPORTSTEP,obj.LibEPANET);
        end
        function value = getTimeReportingStart(obj)
            %Retrieves the value of the reporting start time
            [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_REPORTSTART,obj.LibEPANET);
        end
        function value = getTimeRuleControlStep(obj)
            %Retrieves the time step for evaluating rule-based controls
            [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_RULESTEP,obj.LibEPANET);
        end
        function value = getTimeStatisticsType(obj)
            %Retrieves the type of time series post-processing ('NONE','AVERAGE','MINIMUM','MAXIMUM', 'RANGE')
            [obj.Errcode, obj.TimeStatisticsIndex] = ENgettimeparam(obj.ToolkitConstants.EN_STATISTIC,obj.LibEPANET);
            value=obj.TYPESTATS(obj.TimeStatisticsIndex+1);
        end
        function value = getTimeStatisticsIndex(obj)
            %Retrieves the type of time series post-processing ('NONE','AVERAGE','MINIMUM','MAXIMUM', 'RANGE')
            [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_STATISTIC,obj.LibEPANET);
        end
        function value = getTimeReportingPeriods(obj)
            %Retrieves the number of reporting periods saved to the binary
            [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_PERIODS,obj.LibEPANET);
        end
        %%%%% New version dev2.1 %%%%%
        function value = getTimeStartTime(obj)
            %Retrieves the number of start time
            [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_STARTTIME,obj.LibEPANET);
        end
        function value = getTimeHTime(obj)
            %Retrieves the number of htime
            [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_HTIME,obj.LibEPANET);
        end
        function value = getTimeQTime(obj)
            %Retrieves the number of qtime
            [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_QTIME,obj.LibEPANET);
        end
        function value = getTimeHaltFlag(obj)
            %Retrieves the number of  halt flag
            [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_HALTFLAG,obj.LibEPANET);
        end
        function value = getTimeNextEvent(obj)
            %Retrieves the number of next event 
            [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_NEXTEVENT,obj.LibEPANET);
        end
        function value = getCurvesInfo(obj)
            %New version dev2.1
            %Input:   curveIndex = curve index
            %Output:  *nValues = number of points on curve
            %         *xValues = values for x
            %         *yValues = values for y
            %Returns: error code
            %Purpose: retrieves end nodes of a specific link
            for i=1:obj.getCurveCount
                [obj.Errcode, value.CurveNameID{i}, value.CurveNvalue{i}, value.CurveXvalue{i}, value.CurveYvalue{i}] = ENgetcurve(i,obj.LibEPANET);
            end
        end
        function value = getConnectivityMatrix(obj, varargin)
            conn = obj.getNodesConnectingLinksID;
            nodesID = obj.getNodeNameID;
            value = zeros(obj.getNodeCount,obj.getNodeCount);
            for i=1:obj.getNodeCount
                mm = strcmp(nodesID(i),conn);
                mS = mm(:,1)+mm(:,2);       
                chIndex = find(mS);
                connFinal = conn(chIndex,:);
                mmFinal = mm(chIndex,:);
                Ok = connFinal(find(mmFinal==0));
                nodesIndOk = obj.getNodeIndex(Ok);
                value(i,nodesIndOk) = 1;
            end
        end
        function valueIndex = addCurve(obj,varargin)
            %New version dev2.1
            %Adds a new curve appended to the end of the existing curves
            valueIndex=-1;
            if nargin==2
                [obj.Errcode] = ENaddcurve(varargin{1},obj.LibEPANET);
                valueIndex = getCurveIndex(obj,varargin{1});
            elseif nargin==3
                [obj.Errcode] = ENaddcurve(varargin{1},obj.LibEPANET);
                valueIndex = getCurveIndex(obj,varargin{1});
                setCurve(obj,valueIndex,varargin{2});
            end
        end
        function value = getCurveValue(obj,index,varargin)
            %New version dev2.1
            %Retrieves x,y point for a specific point number and curve
            if nargin<3
                tmplen=obj.getCurveLengths;
                value=zeros(tmplen(index),2);
                for i=1:tmplen(index)
                    [obj.Errcode, value(i,1), value(i,2)] = ENgetcurvevalue(index, i,obj.LibEPANET);
                end
            else
                [obj.Errcode, x, y] = ENgetcurvevalue(index, varargin{1},obj.LibEPANET);
                %if obj.Errcode, error(obj.getError(obj.Errcode)), return; end
                value = [x y];
            end
        end
        function [curveIndex,pumpIndex] = getLinkPumpHeadCurveIndex(obj)
            %New version dev2.1
            %Retrieves index of a head curve for specific link index
            v=1;pumpIndex=obj.getLinkPumpIndex;
            for i=pumpIndex
                [obj.Errcode, curveIndex(v)] = ENgetheadcurveindex(i,obj.LibEPANET); v=v+1;
            end
        end
        function value = getLinkPumpTypeCode(obj)
            %New version dev2.1
            %Input:   index = index of pump in list of links
            %Output:  type = PumpType
            %Returns: error code                              
            %Purpose: retrieves type of a pump for specific link index
            v=1;
            if obj.getLinkPumpCount
                for i=obj.getLinkPumpIndex
                    [obj.Errcode, value(v)] = ENgetpumptype(i,obj.LibEPANET);
                    v=v+1;
                end
            else
                value=[];
            end
        end
        function value = getLinkPumpType(obj)
            %New version dev2.1
            v = obj.getLinkPumpTypeCode;
            value = obj.TYPEPUMP(v+1);
        end
        function value = getPatternAverageValue(obj)
            %New version dev2.1
            for i=obj.getPatternIndex
                [obj.Errcode, value(i)] = ENgetaveragepatternvalue(i,obj.LibEPANET);
            end
        end
        function value = getENfunctionsImpemented(obj)
            [tline]=regexp(fileread([mfilename,'.m']), '\n', 'split');
            value={};
            u=1;
            for i=1:length(tline)
                if ~isempty(regexp(tline{i},'EN\w','match'))
                    enfunc = regexp(tline{i},'\w*EN\w*','match');
                    checkL = isstrprop(enfunc,'upper');
                    if length(checkL{1})>2
                        if strcmp(enfunc{1}(1:2),'EN') && ~checkL{1}(3) && ~strcmp(enfunc{1}(1:3),'EN_')
                            value(u) = enfunc(1);
                            u=u+1;
                        end
                    end
                end
            end
            value = unique(value)';
        end
        function value = getLibFunctions(obj)
            value = obj.libFunctions;
        end
        %%%%%%%%%%%%%%%%%%%%%%%%%%%%
        function value = getVersion(obj)
            % Retrieve the current EPANET LibEPANET
            [obj.Errcode, value] = ENgetversion(obj.LibEPANET);
        end
        function value = getLinkPumpSwitches(obj)
            value=[];
            s = obj.getComputedTimeSeries;
            for i=1:obj.getLinkPumpCount
                index = find(diff(s.Status(:,obj.getLinkPumpIndex(i))));
                value(i) = length(index);
            end
        end
        function value = getComputedHydraulicTimeSeries(obj,varargin)
            % Compute hydraulic simulation and retrieve all time-series
            obj.openHydraulicAnalysis;
            obj.initializeHydraulicAnalysis
            totalsteps=obj.getTimeSimulationDuration/obj.getTimeHydraulicStep;
            initnodematrix=zeros(totalsteps, obj.getNodeCount);
            initlinkmatrix=zeros(totalsteps, obj.getLinkCount);
            if size(varargin,2)==0
                varargin={'time','pressure','demand','head','tankvolume','flow','velocity','headloss','status','setting','energy','efficiency'};
                if ~sum(strcmpi(fields(obj.ToolkitConstants),'EN_EFFICIENCY'))
                    varargin{end}={''};
                end
            else
                for i=1:length(varargin)
                    if isnumeric(varargin{i})
                        sensingnodes=i;
                    end
                end
            end
            if find(strcmpi(varargin,'time'))
                value.Time=zeros(totalsteps,1);
            end
            if find(strcmpi(varargin,'pressure'))
                value.Pressure=initnodematrix;
            end
            if find(strcmpi(varargin,'demand'))
                value.Demand=initnodematrix;
            end
            if find(strcmpi(varargin,'demandSensingNodes'))
                value.DemandSensingNodes=zeros(totalsteps, length(varargin{sensingnodes}));
                value.SensingNodesIndices=varargin{sensingnodes};
            end
            if find(strcmpi(varargin,'head'))
                value.Head=initnodematrix;
            end
            if find(strcmpi(varargin,'tankvolume'))
                value.TankVolume=initnodematrix;
            end
            if find(strcmpi(varargin,'flow'))
                value.Flow=initlinkmatrix;
            end
            if find(strcmpi(varargin,'velocity'))
                value.Velocity=initlinkmatrix;
            end
            if find(strcmpi(varargin,'headloss'))
                value.HeadLoss=initlinkmatrix;
            end
            if find(strcmpi(varargin,'status'))
                value.Status=initlinkmatrix;
            end
            if find(strcmpi(varargin,'setting'))
                value.Setting=initlinkmatrix;
            end
            if find(strcmpi(varargin,'energy'))
                value.Energy=initlinkmatrix;
            end
            if find(strcmpi(varargin,'efficiency'))
                value.Efficiency=initlinkmatrix;
            end
            clear initlinkmatrix initnodematrix;
            k=1;tstep=1;
            while (tstep>0)
                t=obj.runHydraulicAnalysis;
                if find(strcmpi(varargin,'time'))
                    value.Time(k,:)=t;
                end
                if find(strcmpi(varargin,'pressure'))
                    value.Pressure(k,:)=obj.getNodePressure;
                end
                if find(strcmpi(varargin,'demand'))
                    value.Demand(k,:)=obj.getNodeActualDemand;
                end
                if find(strcmpi(varargin,'demandSensingNodes'))
                    value.DemandSensingNodes(k,:)=obj.getNodeActualDemandSensingNodes(varargin{sensingnodes});
                end
                if find(strcmpi(varargin,'head'))
                    value.Head(k,:)=obj.getNodeHydaulicHead;
                end
                if find(strcmpi(varargin,'tankvolume'))
                    value.TankVolume(k,:)=obj.getNodeTankVolume;
                end
                if find(strcmpi(varargin,'flow'))
                    value.Flow(k,:)=obj.getLinkFlows;
                end
                if find(strcmpi(varargin,'velocity'))
                    value.Velocity(k,:)=obj.getLinkVelocity;
                end
                if find(strcmpi(varargin,'headloss'))
                    value.HeadLoss(k,:)=obj.getLinkHeadloss;
                end
                if find(strcmpi(varargin,'status'))
                    value.Status(k,:)=obj.getLinkStatus;
                end
                if find(strcmpi(varargin,'setting'))
                    value.Setting(k,:)=obj.getLinkSettings;
                end
                if find(strcmpi(varargin,'energy'))
                    value.Energy(k,:)=obj.getLinkEnergy;
                end
                if find(strcmpi(varargin,'efficiency'))
                    value.Efficiency(k,:)=obj.getLinkEfficiency;
                end
                tstep = obj.nextHydraulicAnalysisStep;
                k=k+1;
            end
            obj.closeHydraulicAnalysis;
        end
        function value = getComputedQualityTimeSeries(obj,varargin)
            % Compute Quality simulation and retrieve all or some time-series
            obj.openQualityAnalysis
            obj.initializeQualityAnalysis
            %tleft=obj.nextQualityAnalysisStep;
            totalsteps=obj.getTimeSimulationDuration/obj.getTimeHydraulicStep;
            initnodematrix=zeros(totalsteps, obj.getNodeCount);
            if size(varargin,2)==0
                varargin={'time', 'quality', 'linkquality', 'mass'};
            else
                for i=1:length(varargin)
                    if isnumeric(varargin{i})
                        sensingnodes=i;
                    end
                end
            end
            if find(strcmpi(varargin,'time'))
                value.Time=zeros(totalsteps,1);
            end
            if find(strcmpi(varargin,'quality'))
                value.NodeQuality=initnodematrix;
            end
            if find(strcmpi(varargin,'linkquality'))
                value.LinkQuality=zeros(totalsteps, obj.getLinkCount);
            end
            if find(strcmpi(varargin,'qualitySensingNodes'))
                value.QualitySensingNodes=zeros(totalsteps, length(varargin{sensingnodes}));
                value.SensingNodesIndices=varargin{sensingnodes};
            end
            if find(strcmpi(varargin,'demandSensingNodes'))
                value.DemandSensingNodes=zeros(totalsteps, length(varargin{sensingnodes}));
                value.SensingNodesIndices=varargin{sensingnodes};
            end
            if find(strcmpi(varargin,'mass'))
                value.MassFlowRate=initnodematrix;
            end
            if find(strcmpi(varargin,'demand'))
                value.Demand=initnodematrix;
            end
            clear initnodematrix;
            k=1;t=1;tleft=1;
            while (tleft>0)||(t<obj.getTimeSimulationDuration)
                t=obj.runQualityAnalysis;
                if find(strcmpi(varargin,'time'))
                    value.Time(k,:)=t;
                end
                if find(strcmpi(varargin,'quality'))
                    value.NodeQuality(k,:)=obj.getNodeActualQuality;
                end
                if find(strcmpi(varargin,'linkquality'))
                    value.LinkQuality(k,:)=obj.getLinkQuality;
                end
                if find(strcmpi(varargin,'mass'))
                    value.MassFlowRate(k,:)=obj.getNodeMassFlowRate;
                end
                if find(strcmpi(varargin,'demand'))
                    value.Demand(k,:)=obj.getNodeActualDemand;
                end
                if find(strcmpi(varargin,'qualitySensingNodes'))
                    value.QualitySensingNodes(k,:)=obj.getNodeActualQualitySensingNodes(varargin{2});
                end
                if find(strcmpi(varargin,'demandSensingNodes'))
                    value.DemandSensingNodes(k,:)=obj.getNodeActualDemandSensingNodes(varargin{sensingnodes});
                end
                tleft = obj.nextQualityAnalysisStep;
                k=k+1;
                if t==obj.getTimeSimulationDuration
                    t=obj.getTimeSimulationDuration+1;
                end
            end
            obj.closeQualityAnalysis;
        end
        function value = getComputedTimeSeries(obj)
            cnt = obj.getNodeCount;
            LinkNodesIndex = unique(obj.getLinkNodesIndex);
            if (length(LinkNodesIndex)~=cnt)
                lenLinkNodes = [LinkNodesIndex; zeros(cnt-length(LinkNodesIndex),1)];
                value =[];
                fIndex = setdiff(obj.getNodeIndex,lenLinkNodes);
                for i=fIndex
                    disp(['Input Error 233: Node ',obj.getNodeNameID{i},' is unconnected.']);  
                end
                return;
            end
            obj.saveInputFile(obj.BinTempfile);
            [~, rptfile, binfile]= createTempfiles(obj.BinTempfile);
            obj.loadEPANETFile(obj.BinTempfile);
            obj.Errcode=calllib(obj.LibEPANET,'ENepanet',obj.BinTempfile,rptfile,binfile,lib.pointer);
            if sum(obj.Errcode==[302,303])
                while obj.Errcode %fix this error
                    ENMatlabCleanup(obj.LibEPANET);
                    ENLoadLibrary(obj.LibEPANETpath,obj.LibEPANET,0);
                    obj.Errcode=calllib(obj.LibEPANET,'ENepanet',obj.BinTempfile,rptfile,binfile,lib.pointer);
                end
            elseif ~sum(obj.Errcode==[0,1,2,3,4,5,6])
                disp(obj.getError(obj.Errcode));
                obj.loadEPANETFile(obj.BinTempfile);
                value = obj.getComputedHydraulicTimeSeries;
                v = obj.getComputedQualityTimeSeries; 
                value.LinkQuality = v.LinkQuality;
                value.NodeQuality = v.NodeQuality;
                value.MassFlowRate = v.MassFlowRate;
                return;
            end
                
            fid = fopen(binfile,'r');            
            value = readEpanetBin(fid,binfile,rptfile,0);
            obj.loadEPANETFile(obj.BinTempfile);
        end
        function solveCompleteHydraulics(obj)
            [obj.Errcode] = ENsolveH(obj.LibEPANET);
        end
        function solveCompleteQuality(obj)
            [obj.Errcode] = ENsolveQ(obj.LibEPANET);
        end
        function index = addPattern(obj,varargin)
            index=-1;
            if nargin==2
                [obj.Errcode] = ENaddpattern(varargin{1},obj.LibEPANET);
                index = getPatternIndex(obj,varargin{1});
            elseif nargin==3
                [obj.Errcode] = ENaddpattern(varargin{1},obj.LibEPANET);
                index = getPatternIndex(obj,varargin{1});
                setPattern(obj,index,varargin{2});
            end
        end
        function index = addNodeJunction(obj,juncID)
            index = ENaddnode(obj,juncID,obj.ToolkitConstants.EN_JUNCTION);
        end
        function index = addNodeReservoir(obj,resID)
            index = ENaddnode(obj,resID,obj.ToolkitConstants.EN_RESERVOIR);
        end
        function index = addNodeTank(obj,tankID)
            index = ENaddnode(obj,tankID,obj.ToolkitConstants.EN_TANK);
        end
        function index = addLinkPipeCV(obj,cvpipeID,fromNode,toNode)
            index = ENaddlink(obj,cvpipeID,obj.ToolkitConstants.EN_CVPIPE,fromNode,toNode);
        end
        function index = addLinkPipe(obj,pipeID,fromNode,toNode)
            index = ENaddlink(obj,pipeID,obj.ToolkitConstants.EN_PIPE,fromNode,toNode);
        end
        function index = addLinkPump(obj,pumpID,fromNode,toNode)
            index = ENaddlink(obj,pumpID,obj.ToolkitConstants.EN_PUMP,fromNode,toNode);
        end
        function index = addLinkValvePRV(obj,vID, fromNode, toNode)
            index = ENaddlink(obj,vID,obj.ToolkitConstants.EN_PRV,fromNode,toNode);
        end
        function index = addLinkValvePSV(obj,vID, fromNode, toNode)
            index = ENaddlink(obj,vID,obj.ToolkitConstants.EN_PSV,fromNode,toNode);
        end        
        function index = addLinkValvePBV(obj,vID, fromNode, toNode)
            index = ENaddlink(obj,vID,obj.ToolkitConstants.EN_PBV,fromNode,toNode);
        end
        function index = addLinkValveFCV(obj,vID, fromNode, toNode)
            index = ENaddlink(obj,vID,obj.ToolkitConstants.EN_FCV,fromNode,toNode);
        end
        function index = addLinkValveTCV(obj,vID, fromNode, toNode)
            index = ENaddlink(obj,vID,obj.ToolkitConstants.EN_TCV,fromNode,toNode);
        end
        function index = addLinkValveGPV(obj,vID, fromNode, toNode)
            index = ENaddlink(obj,vID,obj.ToolkitConstants.EN_GPV,fromNode,toNode);
        end 
        function Errcode = deleteNode(obj,indexNode)
            [Errcode] = ENdeletenode(obj,indexNode);
        end
        function Errcode = deleteLink(obj,indexLink)
            [Errcode] = ENdeletelink(obj,indexLink);
        end
        function setControl(obj,controlRuleIndex,controlTypeIndex,linkIndex,controlSettingValue,nodeIndex,controlLevel)
            % Example: d.setControl(1,1,13,1,11,150)
            if controlRuleIndex<=obj.getControlRulesCount
                [obj.Errcode] = ENsetcontrol(controlRuleIndex,controlTypeIndex,linkIndex,controlSettingValue,nodeIndex,controlLevel,obj.LibEPANET);
            else
                disp('New rules cannot be added in this LibEPANET')
            end
        end
        function setLinkDiameter(obj, value, varargin)
            if nargin==3, indices = value; value=varargin{1}; else  indices = getLinkIndices(obj,varargin); end
            j=1;
            for i=indices
                [obj.Errcode] = ENsetlinkvalue(i,obj.ToolkitConstants.EN_DIAMETER, value(j),obj.LibEPANET); j=j+1;
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
            end            
        end
        function setLinkLength(obj, value, varargin)
            if nargin==3, indices = value; value=varargin{1}; else  indices = getLinkIndices(obj,varargin); end
            j=1;
            for i=indices
                [obj.Errcode] = ENsetlinkvalue(i,obj.ToolkitConstants.EN_LENGTH, value(j),obj.LibEPANET); j=j+1;
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
            end
        end
        function setLinkRoughnessCoeff(obj, value, varargin)
            if nargin==3, indices = value; value=varargin{1}; else  indices = getLinkIndices(obj,varargin); end
            j=1;
            for i=indices
                [obj.Errcode] = ENsetlinkvalue(i,obj.ToolkitConstants.EN_ROUGHNESS, value(j),obj.LibEPANET); j=j+1;
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
            end
        end
        function setLinkMinorLossCoeff(obj, value, varargin)
            if nargin==3, indices = value; value=varargin{1}; else  indices = getLinkIndices(obj,varargin); end
            j=1;
            for i=indices
                [obj.Errcode] = ENsetlinkvalue(i,obj.ToolkitConstants.EN_MINORLOSS, value(j),obj.LibEPANET); j=j+1;
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
            end
        end
        function setLinkInitialStatus(obj, value, varargin)
            if nargin==3, indices = value; value=varargin{1}; else  indices = getLinkIndices(obj,varargin); end
            j=1;
            for i=indices% Cannot set status for a check valve
                [obj.Errcode] = ENsetlinkvalue(i,obj.ToolkitConstants.EN_INITSTATUS, value(j),obj.LibEPANET); j=j+1;
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
            end
        end
        function setLinkInitialSetting(obj, value, varargin)
            if nargin==3, indices = value; value=varargin{1}; else  indices = getLinkIndices(obj,varargin); end
            j=1;
            for i=indices
                [obj.Errcode] = ENsetlinkvalue(i,obj.ToolkitConstants.EN_INITSETTING, value(j),obj.LibEPANET); j=j+1;
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
            end
        end
        function setLinkBulkReactionCoeff(obj, value, varargin)
            if nargin==3, indices = value; value=varargin{1}; else  indices = getLinkIndices(obj,varargin); end
            j=1;
            for i=indices
                [obj.Errcode] = ENsetlinkvalue(i,obj.ToolkitConstants.EN_KBULK, value(j),obj.LibEPANET); j=j+1;
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
            end
        end
        function setLinkWallReactionCoeff(obj, value, varargin)
            if nargin==3, indices = value; value=varargin{1}; else  indices = getLinkIndices(obj,varargin); end
            j=1;
            for i=indices
                [obj.Errcode] = ENsetlinkvalue(i,obj.ToolkitConstants.EN_KWALL, value(j),obj.LibEPANET); j=j+1;
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
            end
        end
        function setLinkStatus(obj, value, varargin)
            if nargin==3, indices = value; value=varargin{1}; else  indices = getLinkIndices(obj,varargin); end
            j=1;
            for i=indices
                [obj.Errcode] = ENsetlinkvalue(i,obj.ToolkitConstants.EN_STATUS, value(j),obj.LibEPANET); j=j+1;
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
            end
        end
        function setLinkSettings(obj, value, varargin)
            if nargin==3, indices = value; value=varargin{1}; else  indices = getLinkIndices(obj,varargin); end
            j=1;
            for i=indices
                [obj.Errcode] = ENsetlinkvalue(i,obj.ToolkitConstants.EN_SETTING, value(j),obj.LibEPANET); j=j+1;
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
            end
        end
        function setNodeElevations(obj, value, varargin)
            if nargin==3, indices = value; value=varargin{1}; else  indices = getNodeIndices(obj,varargin); end
            j=1;
            for i=indices
                [obj.Errcode] = ENsetnodevalue(i,obj.ToolkitConstants.EN_ELEVATION, value(j),obj.LibEPANET); j=j+1;
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
            end
        end
        function setNodeBaseDemands(obj, value, varargin)
            if nargin==3, 
                indices = value; value=varargin{1};j=1;
                for i=indices
                    [obj.Errcode] = ENsetnodevalue(i,obj.ToolkitConstants.EN_BASEDEMAND, value(j),obj.LibEPANET); j=j+1;
                    if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                end
                return;
            end
            %New version dev2.1
            chckfunctions=libfunctions(obj.LibEPANET);
            if sum(strcmp(chckfunctions,'ENsetbasedemand'))
                NodeNumDemandC=obj.getNodeDemandCategoriesNumber;
                for i=1:obj.getNodeJunctionCount
                    for u=1:NodeNumDemandC(i)
                        [obj.Errcode] = ENsetbasedemand(i, u, value{u}(i),obj.LibEPANET);
                    end
                end
            else %version epanet20012
                if nargin==3, indices = value; value=varargin{1}; else  indices = getNodeIndices(obj,varargin); end
                j=1;
                for i=indices
                    [obj.Errcode] = ENsetnodevalue(i,obj.ToolkitConstants.EN_BASEDEMAND, value(j),obj.LibEPANET); j=j+1;
                    if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                end
            end
        end
        function setNodeCoordinates(obj, value, varargin)
            if nargin==3, indices = value; value=varargin{1}; else  indices = getNodeIndices(obj,varargin); end
            if ~isempty(varargin)
                for i=indices
                    [obj.Errcode] = ENsetcoord(i,value(1),value(2),obj.LibEPANET);
                    if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                end
            else
                for i=1:length(value)
                    x=value{1}(i);
                    y=value{2}(i);
                    [obj.Errcode] = ENsetcoord(i,x,y,obj.LibEPANET);
                end
            end
        end
        function setNodeDemandPatternIndex(obj, value, varargin)
            if nargin==3, 
                indices = value; value=varargin{1};j=1;
                for i=indices
                    [obj.Errcode] = ENsetnodevalue(i,obj.ToolkitConstants.EN_PATTERN, value(j),obj.LibEPANET); j=j+1;
                    if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
                end
                return;
            end

            chckfunctions=libfunctions(obj.LibEPANET);
            if sum(strcmp(chckfunctions,'ENsetdemandpattern')) && iscell(value)
                NodeNumDemandC=obj.getNodeDemandCategoriesNumber;
                for i=1:obj.getNodeJunctionCount
                    for u=1:NodeNumDemandC(i)
                        [obj.Errcode] = ENsetdemandpattern(i, u, value{u}(i),obj.LibEPANET);
                    end
                end
%                 warning('Can changes the demand pattern index based on the number of categories.');
            else
                if iscell(value)
                    value=value{1};
                end
                for i=1:length(value)
                    [obj.Errcode] = ENsetnodevalue(i, obj.ToolkitConstants.EN_PATTERN, value(i),obj.LibEPANET);
                end
            end
        end
        function setNodeEmitterCoeff(obj, value, varargin)
            if nargin==3, indices = value; value=varargin{1}; else  indices = getNodeIndices(obj,varargin); end
            j=1;
            for i=indices
                [obj.Errcode] = ENsetnodevalue(i, obj.ToolkitConstants.EN_EMITTER, value(j),obj.LibEPANET); j=j+1;
%                 if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
            end
        end
        function setNodeInitialQuality(obj, value, varargin)
            if nargin==3, indices = value; value=varargin{1}; else  indices = getNodeIndices(obj,varargin); end
            j=1;
            for i=indices
                [obj.Errcode] = ENsetnodevalue(i, obj.ToolkitConstants.EN_INITQUAL, value(j),obj.LibEPANET); j=j+1;
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
            end
        end
        function setNodeTankInitialLevel(obj, value, varargin)
            if nargin==3
                [obj.Errcode] = ENsetnodevalue(value, obj.ToolkitConstants.EN_TANKLEVEL, varargin{1},obj.LibEPANET);
                if obj.Errcode, error(obj.getError(obj.Errcode)); end 
                return;
            end
            for i=obj.getNodeTankIndex
                [obj.Errcode] = ENsetnodevalue(i, obj.ToolkitConstants.EN_TANKLEVEL, value(i),obj.LibEPANET);
            end
        end
        function setNodeTankMixingModelType(obj, value, varargin)
            if nargin==3
                code=strfind(strcmpi(varargin{1},obj.TYPEMIXMODEL),1)-1;
                [obj.Errcode] = ENsetnodevalue(value, obj.ToolkitConstants.EN_MIXMODEL, code,obj.LibEPANET);
                if obj.Errcode, error(obj.getError(obj.Errcode)); end 
                return;
            end
            for i=obj.getNodeTankIndex
                code=strfind(strcmpi(value(i),obj.TYPEMIXMODEL),1)-1;
                [obj.Errcode] = ENsetnodevalue(i, obj.ToolkitConstants.EN_MIXMODEL, code,obj.LibEPANET);
            end
        end
        function setNodeTankDiameter(obj, value, varargin)
            if nargin==3
                [obj.Errcode] = ENsetnodevalue(value, obj.ToolkitConstants.EN_TANKDIAM, varargin{1},obj.LibEPANET);
                if obj.Errcode, error(obj.getError(obj.Errcode)); end 
                return;
            end
            for i=obj.getNodeTankIndex
                [obj.Errcode] = ENsetnodevalue(i, obj.ToolkitConstants.EN_TANKDIAM, value(i),obj.LibEPANET);
            end
        end
        function setNodeTankMinimumWaterLevel(obj, value, varargin)
            if nargin==3
                [obj.Errcode] = ENsetnodevalue(value, obj.ToolkitConstants.EN_MINLEVEL, varargin{1},obj.LibEPANET);
                if obj.Errcode, error(obj.getError(obj.Errcode)); end 
                return;
            end
            for i=obj.getNodeTankIndex
                [obj.Errcode] = ENsetnodevalue(i, obj.ToolkitConstants.EN_MINLEVEL, value(i),obj.LibEPANET);
            end
        end
        function setNodeTankMinimumWaterVolume(obj, value, varargin)
            if nargin==3
                [obj.Errcode] = ENsetnodevalue(value, obj.ToolkitConstants.EN_MINVOLUME, varargin{1},obj.LibEPANET);
                if obj.Errcode, error(obj.getError(obj.Errcode)); end 
                return;
            end
            for i=obj.getNodeTankIndex
                [obj.Errcode] = ENsetnodevalue(i, obj.ToolkitConstants.EN_MINVOLUME, value(i),obj.LibEPANET);
            end
        end
        function setNodeTankMaximumWaterLevel(obj, value, varargin)
            if nargin==3
                [obj.Errcode] = ENsetnodevalue(value, obj.ToolkitConstants.EN_MAXLEVEL, varargin{1},obj.LibEPANET);
                if obj.Errcode, error(obj.getError(obj.Errcode)); end 
                return;
            end
            for i=obj.getNodeTankIndex
                [obj.Errcode] = ENsetnodevalue(i, obj.ToolkitConstants.EN_MAXLEVEL, value(i),obj.LibEPANET);
            end
        end
        function setNodeTankMinimumFraction(obj, value, varargin)
            if nargin==3
                [obj.Errcode] = ENsetnodevalue(value, obj.ToolkitConstants.EN_MIXFRACTION, varargin{1},obj.LibEPANET);
                if obj.Errcode, error(obj.getError(obj.Errcode)); end 
                return;
            end
            for i=obj.getNodeTankIndex
                [obj.Errcode] = ENsetnodevalue(i, obj.ToolkitConstants.EN_MIXFRACTION, value(i),obj.LibEPANET);
            end
        end
        function setNodeTankBulkReactionCoeff(obj, value, varargin)
            if nargin==3
                [obj.Errcode] = ENsetnodevalue(value, obj.ToolkitConstants.EN_TANK_KBULK, varargin{1},obj.LibEPANET);
                if obj.Errcode, error(obj.getError(obj.Errcode)); end 
                return;
            end
            for i=obj.getNodeTankIndex
                [obj.Errcode] = ENsetnodevalue(i, obj.ToolkitConstants.EN_TANK_KBULK, value(i),obj.LibEPANET);
            end
        end
        function setNodeSourceQuality(obj, value, varargin)
            if nargin==3, indices = value; value=varargin{1}; else  indices = getNodeIndices(obj,varargin); end
            j=1;
            for i=indices
                [obj.Errcode] = ENsetnodevalue(i, obj.ToolkitConstants.EN_SOURCEQUAL, value(j),obj.LibEPANET); j=j+1;
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
            end
        end
        function setNodeSourcePatternIndex(obj, value, varargin)
            if nargin==3, indices = value; value=varargin{1}; else  indices = getNodeIndices(obj,varargin); end
            j=1;
            for i=indices
                [obj.Errcode] = ENsetnodevalue(i, obj.ToolkitConstants.EN_SOURCEPAT, value(j),obj.LibEPANET); j=j+1;
                if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
            end
        end
        function value = setLinkPumpHeadCurveIndex(obj, value, varargin)
            if nargin==3, indices = value; value=varargin{1}; else  indices = getNodeIndices(obj,varargin); end
            j=1;
            for i=indices
                [obj.Errcode] = ENsetheadcurveindex(obj,i,value(j)); j=j+1;
            end
        end
        function setNodeSourceType(obj, index, value)
            value=find(strcmpi(obj.TYPESOURCE,value)==1)-1;
            [obj.Errcode] = ENsetnodevalue(index, obj.ToolkitConstants.EN_SOURCETYPE, value,obj.LibEPANET);
        end
        function setOptionsMaxTrials(obj,value)
            [obj.Errcode] = ENsetoption(obj.ToolkitConstants.EN_TRIALS,value,obj.LibEPANET);
        end
        function setOptionsAccuracyValue(obj,value)
            [obj.Errcode] = ENsetoption(obj.ToolkitConstants.EN_ACCURACY,value,obj.LibEPANET);
        end
        function setOptionsQualityTolerance(obj,value)
            [obj.Errcode] = ENsetoption(obj.ToolkitConstants.EN_TOLERANCE,value,obj.LibEPANET);
        end
        function setOptionsEmitterExponent(obj,value)
            [obj.Errcode] = ENsetoption(obj.ToolkitConstants.EN_EMITEXPON,value,obj.LibEPANET);
        end
        function setOptionsPatternDemandMultiplier(obj,value)
            [obj.Errcode] = ENsetoption(obj.ToolkitConstants.EN_DEMANDMULT,value,obj.LibEPANET);
        end
        function setTimeSimulationDuration(obj,value)
            [obj.Errcode] = ENsettimeparam(obj.ToolkitConstants.EN_DURATION,value,obj.LibEPANET);
        end
        function setTimeHydraulicStep(obj,value)
            % Hstep = min(Pstep,Hstep)
            % Hstep = min(Rstep,Hstep)
            % Hstep = min(Qstep,Hstep)
            [obj.Errcode] = ENsettimeparam(obj.ToolkitConstants.EN_HYDSTEP,value,obj.LibEPANET);
        end
        function setTimeQualityStep(obj,value)
            % Qstep = min(Qstep,Hstep)
            [obj.Errcode] = ENsettimeparam(obj.ToolkitConstants.EN_QUALSTEP,value,obj.LibEPANET);
        end
        function setTimePatternStep(obj,value)
            [obj.Errcode] = ENsettimeparam(obj.ToolkitConstants.EN_PATTERNSTEP,value,obj.LibEPANET);
        end
        function setTimePatternStart(obj,value)
            [obj.Errcode] = ENsettimeparam(obj.ToolkitConstants.EN_PATTERNSTART,value,obj.LibEPANET);
        end
        function setTimeReportingStep(obj,value)
            [obj.Errcode] = ENsettimeparam(obj.ToolkitConstants.EN_REPORTSTEP,value,obj.LibEPANET);
        end
        function setTimeReportingStart(obj,value)
            [obj.Errcode] = ENsettimeparam(obj.ToolkitConstants.EN_PATTERNSTART,value,obj.LibEPANET);
        end
        function setTimeRuleControlStep(obj,value)
            [obj.Errcode] = ENsettimeparam(obj.ToolkitConstants.EN_RULESTEP,value,obj.LibEPANET);
        end
        function setTimeStatisticsType(obj,value)
            %'NONE','AVERAGE','MINIMUM','MAXIMUM', 'RANGE'
            tmpindex=find(strcmpi(obj.TYPESTATS,value)==1)-1;
            [obj.Errcode] = ENsettimeparam(obj.ToolkitConstants.EN_STATISTIC,tmpindex,obj.LibEPANET);
        end
        function setTimeHTime(obj,value)
            % epanet20100
            [obj.Errcode] = ENsettimeparam(obj.ToolkitConstants.EN_HTIME,value,obj.LibEPANET);
        end
%         function setTimeQTime(obj,value)
%             % epanet20100
%             [obj.Errcode] = ENsettimeparam(obj.ToolkitConstants.EN_QTIME,value,obj.LibEPANET);
%         end
        function setTimeHaltFlag(obj,value)
            % epanet20100
            [obj.Errcode] = ENsettimeparam(obj.ToolkitConstants.EN_HALTFLAG,value,obj.LibEPANET);
        end
%         function value = setTimeReportingPeriods(obj)
%             [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_PERIODS,obj.LibEPANET);
%         function value = setTimeStartTime(obj)
%             [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_STARTTIME,obj.LibEPANET);
%         function value = setTimeNextEvent(obj)
%             [obj.Errcode, value] = ENgettimeparam(obj.ToolkitConstants.EN_NEXTEVENT,obj.LibEPANET);
%         end
        function setPattern(obj,index,patternVector)
            nfactors=length(patternVector);
            [obj.Errcode] = ENsetpattern(index, patternVector, nfactors,obj.LibEPANET);
        end
        function setPatternMatrix(obj,patternMatrix)
            nfactors=size(patternMatrix,2);
            for i=1:size(patternMatrix,1)
                [obj.Errcode] = ENsetpattern(i, patternMatrix(i,:), nfactors,obj.LibEPANET);
            end
        end
        function setPatternValue(obj,index, patternTimeStep, patternFactor)
            [obj.Errcode] = ENsetpatternvalue(index, patternTimeStep, patternFactor,obj.LibEPANET);
        end
        function setQualityType(obj,varargin)
            qualcode=0;chemname='';chemunits='';tracenode='';
            if find(strcmpi(varargin,'none')==1)
                [obj.Errcode] = ENsetqualtype(qualcode,chemname,chemunits,tracenode,obj.LibEPANET);
            elseif find(strcmpi(varargin,'age')==1)
                qualcode=2;
                [obj.Errcode] = ENsetqualtype(qualcode,chemname,chemunits,tracenode,obj.LibEPANET);
            elseif find(strcmpi(varargin,'chem')==1)
                qualcode=1;
                chemname=varargin{1};
                if nargin<3
                    chemunits='mg/L';
                else
                    chemunits=varargin{2};
                end
                [obj.Errcode] = ENsetqualtype(qualcode,chemname,chemunits,tracenode,obj.LibEPANET);
            elseif find(strcmpi(varargin,'trace')==1)
                qualcode=3;
                tracenode=varargin{2};
                [obj.Errcode] = ENsetqualtype(qualcode,chemname,chemunits,tracenode,obj.LibEPANET);
            else
                qualcode=1;
                chemname=varargin{1};
                if nargin<3
                    chemunits='mg/L';
                else
                    chemunits=varargin{2};
                end
                [obj.Errcode] = ENsetqualtype(qualcode,chemname,chemunits,tracenode,obj.LibEPANET);                
            end
        end
        function setReportFormatReset(obj)
            [obj.Errcode]=ENresetreport(obj.LibEPANET);
        end
        function setReportStatus(obj,value)
            %'yes','no','full'
            statuslevel=find(strcmpi(obj.TYPEREPORT,value)==1)-1;
            [obj.Errcode] = ENsetstatusreport(statuslevel,obj.LibEPANET);
        end
        function setReport(obj,value)
            [obj.Errcode] = ENsetreport(value,obj.LibEPANET);
        end
        function closeNetwork(obj)
            [obj.Errcode] = ENclose(obj.LibEPANET);
        end
        function closeHydraulicAnalysis(obj)
            [obj.Errcode] = ENcloseH(obj.LibEPANET);
        end
        function closeQualityAnalysis(obj)
            [obj.Errcode] = ENcloseQ(obj.LibEPANET);
        end
        function saveHydraulicFile(obj,hydname)
            [obj.Errcode]=ENsavehydfile(hydname,obj.LibEPANET);
        end
        function useHydraulicFile(obj,hydname)
            [obj.Errcode]=ENusehydfile(hydname,obj.LibEPANET);
        end
        function initializeHydraulicAnalysis(obj,varargin)
            code=obj.ToolkitConstants.EN_SAVE;
            if ~isempty(varargin)
                code=varargin{1};
            end
            [obj.Errcode] = ENinitH(code,obj.LibEPANET);
        end
        function initializeQualityAnalysis(obj,varargin)
            code=obj.ToolkitConstants.EN_SAVE;
            if ~isempty(varargin)
% obj.ToolkitConstants.EN_SAVE_AND_INIT; obj.ToolkitConstants.EN_NOSAVE;
% obj.ToolkitConstants.EN_INITFLOW;
                code=varargin{1};
            end
            [obj.Errcode] = ENinitQ(code,obj.LibEPANET);
        end
        function tstep = nextHydraulicAnalysisStep(obj)
            [obj.Errcode, tstep] = ENnextH(obj.LibEPANET);
        end
        function tstep = nextQualityAnalysisStep(obj)
            [obj.Errcode, tstep] = ENnextQ(obj.LibEPANET);
        end
        function openHydraulicAnalysis(obj)
            [obj.Errcode] = ENopenH(obj.LibEPANET);
        end
        function openQualityAnalysis(obj)
            [obj.Errcode] = ENopenQ(obj.LibEPANET);
        end
        function tstep = runHydraulicAnalysis(obj)
            [obj.Errcode, tstep] = ENrunH(obj.LibEPANET);
        end
        function tstep = runQualityAnalysis(obj)
            [obj.Errcode, tstep] = ENrunQ(obj.LibEPANET);
        end
        function saveHydraulicsOutputReportingFile(obj)
            [obj.Errcode] = ENsaveH(obj.LibEPANET);
        end
        function tleft=stepQualityAnalysisTimeLeft(obj)
            [obj.Errcode, tleft] = ENstepQ(obj.LibEPANET);
        end
        function Errcode = saveInputFile(obj,inpname)
            [addSectionCoordinates,addSectionRules] = obj.getBinCoordRuleSections(obj.InputFile);
            [Errcode] = ENsaveinpfile(inpname,obj.LibEPANET);
            [~,info] = obj.readInpFile;
            endSectionIndex=find(~cellfun(@isempty,regexp(info,'END','match')));
            endInpIndex=find(~cellfun(@isempty,regexp(addSectionCoordinates,'END','match')));
            info(endSectionIndex)='';
            f1 = writenewTemp(obj.BinTempfile);
            coordSectionIndex=find(~cellfun(@isempty,regexp(info,'COORDINATES','match')));
            if ~isempty(coordSectionIndex)
                fprintf(f1, '%s\n', info{1:coordSectionIndex-1});
            else
                fprintf(f1, '%s\n', info{:});
            end
            if ~isempty(addSectionRules)
                fprintf(f1, '%s\n', addSectionRules{:});
            end
            if ~isempty(addSectionCoordinates) % && isempty(coordSectionIndex)
                fprintf(f1, '%s\n', addSectionCoordinates{:});
            end
            if isempty(endInpIndex)
                fprintf(f1, '[END]\n');
            end
            fclose(f1);
        end
        function writeLineInReportFile(obj, line)
            [obj.Errcode] = ENwriteline (line,obj.LibEPANET);
        end
        function writeReport(obj)
            %Writes a formatted text report on simulation results to the Report file
            [obj.Errcode]=ENreport(obj.LibEPANET);
        end
        function unload(obj)
            %ENclose(obj.LibEPANET);
            ENMatlabCleanup(obj.LibEPANET);
            fclose('all');
            files=dir('@#*');
            try delete([obj.InputFile(1:end-4),'.txt']), catch; end
            if ~isempty(files); delete('@#*'); end
            if exist([obj.BinTempfile(1:end-4),'.bin'])==2
                delete([obj.BinTempfile(1:end-4),'.bin']);
            end
            delete(obj.BinTempfile);
            if exist([obj.BinTempfile(1:end-4),'.txt'])==2
                delete([obj.BinTempfile(1:end-4),'.txt']);
            end
            if exist(obj.MSXTempFile)==2
                delete(obj.MSXTempFile);
            end
            disp('EPANET Class is unloaded')
        end
        function loadMSXFile(obj,msxname,varargin)
            if isempty(varargin)
                MSXMatlabSetup(obj,msxname);
            else
                MSXMatlabSetup(obj,msxname,varargin);
            end
        end
        function value = getMSXEquationsTerms(obj)
            [value,~,~] = getEquations(obj.MSXFile);
        end
        function value = getMSXEquationsPipes(obj)
            [~,value,~] = getEquations(obj.MSXFile);
        end
        function value = getMSXEquationsTanks(obj)
            [~,~,value] = getEquations(obj.MSXFile);
        end
        function value = getMSXTimeStep(obj)
            [value] = getMSXOptions(obj.MSXFile);
            value = value.timestep;
        end
        function value = getMSXSolver(obj)
            [value] = getMSXOptions(obj.MSXFile);
            value = value.solver;
        end
        function value = getMSXAreaUnits(obj)
            [value] = getMSXOptions(obj.MSXFile);
            value = value.areaunits;
        end        
        function value = getMSXRateUnits(obj)
            [value] = getMSXOptions(obj.MSXFile);
            value = value.rateunits;
        end 
        function value = getMSXRtol(obj)
            [value] = getMSXOptions(obj.MSXFile);
            value = value.rtol;
        end 
        function value = getMSXAtol(obj)
            [value] = getMSXOptions(obj.MSXFile);
            value = value.atol;
        end
        function value = getMSXCoupling(obj)
            [value] = getMSXOptions(obj.MSXFile);
            value = value.coupling;
        end
        function value = getMSXCompiler(obj)
            [value] = getMSXOptions(obj.MSXFile);
            value = value.compiler;
        end
        function value = getMSXSpeciesCount(obj)
            % Species, Constants, Parameters, Patterns
            [obj.Errcode, value] = MSXgetcount(3,obj.MSXLibEPANET);
        end
        function value = getMSXConstantsCount(obj)
            [obj.Errcode, value] = MSXgetcount(6,obj.MSXLibEPANET);
        end
        function value = getMSXParametersCount(obj)
            [obj.Errcode, value] = MSXgetcount(5,obj.MSXLibEPANET);
        end
        function value = getMSXPatternsCount(obj)
            [obj.Errcode, value] = MSXgetcount(7,obj.MSXLibEPANET);
        end
        function value = getMSXSpeciesNameID(obj,varargin)
            if isempty(varargin)
                for i=1:obj.getMSXSpeciesCount
                    [obj.Errcode, len] = MSXgetIDlen(3,i,obj.MSXLibEPANET);
                    [obj.Errcode, value{i}]=MSXgetID(3,i,len,obj.MSXLibEPANET);
                end
            else
                k=1;
                for i=varargin{1}
                    [obj.Errcode, len] = MSXgetIDlen(3,i,obj.MSXLibEPANET);
                    [obj.Errcode, value{k}]=MSXgetID(3,i,len,obj.MSXLibEPANET);
                    k=k+1;
                end
            end
        end
        function value = getMSXSpeciesType(obj)
            value={};
            if obj.getMSXSpeciesCount
                for i=1:obj.getMSXSpeciesCount
                    [obj.Errcode,value{i},~,~,~] = MSXgetspecies(i,obj.MSXLibEPANET);
                end
            end
        end
        function value = getMSXSpeciesUnits(obj)
            value={};
            if obj.getMSXSpeciesCount
                for i=1:obj.getMSXSpeciesCount
                    [obj.Errcode,~,value{i},~,~] = MSXgetspecies(i,obj.MSXLibEPANET);
                end
            end
        end
        function value = getMSXSpeciesATOL(obj)
            value=[];
            if obj.getMSXSpeciesCount
                for i=1:obj.getMSXSpeciesCount
                    [obj.Errcode,~,~,value,~] = MSXgetspecies(i,obj.MSXLibEPANET);
                end
            end
        end
        function value = getMSXSpeciesRTOL(obj)
            value=[];
            if obj.getMSXSpeciesCount
                for i=1:obj.getMSXSpeciesCount
                    [obj.Errcode,~,~,~,value] = MSXgetspecies(i,obj.MSXLibEPANET);
                end
            end
        end
        function value = getMSXSpeciesIndex(obj,varargin)
            if isempty(varargin)
                value=1:obj.getMSXSpeciesCount;
                if isempty(value), value=[]; end
            elseif isa(varargin{1},'cell')
                for j=1:length(varargin{1})
                    [obj.Errcode, value(j)] = MSXgetindex(3,varargin{1}{j},obj.MSXLibEPANET);
                end
            elseif isa(varargin{1},'char')
                [obj.Errcode, value] = MSXgetindex(obj.MSXLibEPANET,3,varargin{1});
            end
        end
        function value = getMSXConstantsNameID(obj)
            value={};
            if obj.getMSXConstantsCount
                for i=1:obj.getMSXConstantsCount
                    [obj.Errcode, len] = MSXgetIDlen(6,i,obj.MSXLibEPANET);
                    [obj.Errcode, value{i}] = MSXgetID(6,i,len,obj.MSXLibEPANET);
                end
            end
        end
        function value = getMSXConstantsValue(obj)
            value=[];
            if obj.getMSXConstantsCount
                for i=1:obj.getMSXConstantsCount
                    [obj.Errcode, value(i)] = MSXgetconstant(i,obj.MSXLibEPANET);
                end
            end
        end
        function value = getMSXConstantsIndex(obj,varargin)
            if isempty(varargin)
                value=1:obj.getMSXConstantsCount;
                if isempty(value), value=[]; end
            elseif isa(varargin{1},'cell')
                for j=1:length(varargin{1})
                    [obj.Errcode, value(j)] = MSXgetindex(6,varargin{1}{j},obj.MSXLibEPANET);
                end
            elseif isa(varargin{1},'char')
                [obj.Errcode, value] = MSXgetindex(obj.MSXLibEPANET,6,varargin{1});
            end
        end
        function value = getMSXParametersNameID(obj,varargin)
            if isempty(varargin)
                if ~obj.getMSXParametersCount, value={};return; end
                for i=1:obj.getMSXParametersCount
                    [obj.Errcode, len] = MSXgetIDlen(5,i,obj.MSXLibEPANET);
                    [obj.Errcode, value{i}]=MSXgetID(5,i,len,obj.MSXLibEPANET);
                end
            else
                k=1;
                for i=varargin{1}
                    [obj.Errcode, len] = MSXgetIDlen(5,i,obj.MSXLibEPANET);
                    [obj.Errcode, value{k}]=MSXgetID(5,i,len,obj.MSXLibEPANET);
                    k=k+1;
                end
            end
        end
        function value = getMSXParametersIndex(obj,varargin)
            if isempty(varargin)
                value=1:obj.getMSXParametersCount;
                if isempty(value), value=[]; end
            elseif isa(varargin{1},'cell')
                for j=1:length(varargin{1})
                    [obj.Errcode, value(j)] = MSXgetindex(5,varargin{1}{j},obj.MSXLibEPANET);
                end
            elseif isa(varargin{1},'char')
                [obj.Errcode, value] = MSXgetindex(5,varargin{1},obj.MSXLibEPANET);
            end
        end
        function value = getMSXParametersTanksValue(obj)
            value={};
            if ~obj.getMSXParametersCount, value=0;return;end
            if ~length(obj.NodeTankIndex), value=0;return;end
            for i=1:length(obj.NodeTankIndex)
                for j=1:obj.MSXParametersCount
                    [obj.Errcode, value{obj.NodeTankIndex(i)}(j)] = MSXgetparameter(0,obj.NodeTankIndex(i),j,obj.MSXLibEPANET);
                end
            end
        end
        function value = getMSXParametersPipesValue(obj)
            if ~obj.getMSXParametersCount, value=[];return; end
            for i=1:obj.getLinkPipeCount
                for j=1:obj.getMSXParametersCount
                    [obj.Errcode, value{i}(j)] = MSXgetparameter(1,i,j,obj.MSXLibEPANET);
                end
            end
        end
        function value = getMSXPatternsNameID(obj,varargin)
            if isempty(varargin)
                if ~obj.getMSXPatternsCount, value={};return; end
                for i=1:obj.getMSXPatternsCount
                    [obj.Errcode, len] = MSXgetIDlen(7,i,obj.MSXLibEPANET);
                    [obj.Errcode, value{i}]=MSXgetID(7,i,len,obj.MSXLibEPANET);
                end
            else
                k=1;
                for i=varargin{1}
                    [obj.Errcode, len] = MSXgetIDlen(7,i,obj.MSXLibEPANET);
                    [obj.Errcode, value{k}]=MSXgetID(7,i,len,obj.MSXLibEPANET);
                    k=k+1;
                end
            end
        end
        function value = getMSXPatternsIndex(obj,varargin)
            if isempty(varargin)
                value=1:obj.getMSXPatternsCount;
                if isempty(value), value=[]; end
            elseif isa(varargin{1},'cell')
                for j=1:length(varargin{1})
                    [obj.Errcode, value(j)] = MSXgetindex(obj.MSXLibEPANET,7,varargin{1}{j});
                end
            elseif isa(varargin{1},'char')
                [obj.Errcode, value] = MSXgetindex(obj.MSXLibEPANET,7,varargin{1});
            end
        end
        function value = getMSXPatternsLengths(obj,varargin)
            value =[];
            if isempty(varargin)
                if obj.getMSXPatternsCount
                    for i=obj.getMSXPatternsIndex
                        [obj.Errcode, value(i)]=MSXgetpatternlen(i,obj.MSXLibEPANET);
                    end
                end
            elseif isa(varargin{1},'cell')
                for j=1:length(varargin{1})
                    [obj.Errcode, value(j)] = MSXgetpatternlen(obj.getMSXPatternsIndex(varargin{1}{j}),obj.MSXLibEPANET);
                end
            elseif isa(varargin{1},'char')
                [obj.Errcode, value] = MSXgetpatternlen(obj.getMSXPatternsIndex(varargin{1}),obj.MSXLibEPANET);
            elseif isa(varargin{1},'numeric')
                k=1;
                for i=varargin{1}
                    [obj.Errcode, value(k)]=MSXgetpatternlen(i,obj.MSXLibEPANET);
                    k=k+1;
                end
            end
        end
        function value = getMSXNodeInitqualValue(obj)
            if ~obj.getMSXSpeciesCount, value{1}(1)=0; return; end
            for i=1:obj.getNodeCount
                for j=1:obj.getMSXSpeciesCount
                    [obj.Errcode, value{i}(j)] = MSXgetinitqual(0,i,j,obj.MSXLibEPANET);
                end
            end
        end
        function value = getMSXLinkInitqualValue(obj)
            if ~obj.getMSXSpeciesCount, value{1}(1)=0; return; end
            for i=1:obj.getLinkCount
                for j=1:obj.getMSXSpeciesCount
                    [obj.Errcode, value{i}(j)] = MSXgetinitqual(1,i,j,obj.MSXLibEPANET);
                end
            end
        end
        function value = getMSXSources(obj)
            for i=1:obj.getNodeCount
                for j=1:obj.getMSXSpeciesCount
                    [obj.Errcode, obj.MSXSourceType{i}{j},obj.MSXSourceLevel{i}(j),obj.MSXSourcePatternIndex{i}(j)] = MSXgetsource(i,j,obj.MSXLibEPANET);
                    obj.MSXSourceTypeCode{i}(j)=find(strcmp(obj.MSXTYPESOURCE,obj.MSXSourceType{i}{j}))-2;
                end
            end
            SnodeID=obj.getMSXSourceNodeNameID;
           % value={obj.MSXSourceType,obj.MSXSourceTypeCode,obj.MSXSourceLevel,obj.MSXSourcePatternIndex,SnodeID};
            value.MSXSourceType=obj.MSXSourceType;
            value.MSXSourceTypeCode=obj.MSXSourceTypeCode;
            value.MSXSourceLevel=obj.MSXSourceLevel;
            value.MSXSourcePatternIndex=obj.MSXSourcePatternIndex;
            value.MSXSourceNodeNameID=SnodeID;
        end
        function value = getMSXSourceNodeNameID(obj)
            value = obj.getNodeNameID;
        end
        function value = getMSXSourceType(obj)
            for i=1:obj.getNodeCount
                for j=1:obj.getMSXSpeciesCount
                    [obj.Errcode, value{i}{j},~,~] = MSXgetsource(i,j,obj.MSXLibEPANET);
                end
            end
        end
        function value = getMSXSourceLevel(obj)
            for i=1:obj.getNodeCount
                for j=1:obj.getMSXSpeciesCount
                    [obj.Errcode,~,value{i}(j),~] = MSXgetsource(i,j,obj.MSXLibEPANET);
                end
            end
        end
        function value = getMSXSourcePatternIndex(obj)
            for i=1:obj.getNodeCount
                for j=1:obj.getMSXSpeciesCount
                    [obj.Errcode,~,~,value{i}(j)] = MSXgetsource(i,j,obj.MSXLibEPANET);
                end
            end
        end
        function value = getMSXPattern(obj) %Mass flow rate per minute of a chemical source
            tmpmaxlen=max(obj.getMSXPatternsLengths);
            value=nan(obj.getMSXPatternsCount,tmpmaxlen);
            for i=1:obj.getMSXPatternsCount
                tmplength=obj.getMSXPatternsLengths(i);
                for j=1:tmplength
                    [obj.Errcode, value(i,j)] = MSXgetpatternvalue(i,j,obj.MSXLibEPANET);
                end
                if tmplength<tmpmaxlen
                    for j=(tmplength+1):tmpmaxlen
                        value(i,j)=value(i,j-tmplength);
                    end
                end
                
            end
        end
        function value = getMSXPatternValue(obj,patternIndex, patternStep) %Mass flow rate per minute of a chemical source
            [obj.Errcode, value] = MSXgetpatternvalue(patternIndex, patternStep, obj.MSXLibEPANET);
        end
        function value = getMSXSpeciesConcentration(obj, type, index, species)
            [obj.Errcode, value] = MSXgetqual(type, index, species, obj.MSXLibEPANET);
        end
        function value = getMSXComputedQualityNode(obj,varargin)
            if obj.getMSXSpeciesCount==0
                value=0;
                return;
            end
            if ~isempty(varargin)
                if length(varargin)==1
                    ss=varargin{1};%index node    %future work with argument ID
                    uu=1:obj.getMSXSpeciesCount;
                elseif length(varargin)==2
                    ss=varargin{1};%index node
                    uu=varargin{2};%index species
                end
            else
                ss=1:obj.getNodeCount;%index node
                uu=1:obj.getMSXSpeciesCount;
            end
            value.Quality = cell(1,length(ss));
            % Obtain a hydraulic solution
            obj.solveMSXCompleteHydraulics(obj.MSXLibEPANET);
            % Run a step-wise water quality analysis without saving
            % RESULTS to file
            obj.initializeMSXQualityAnalysis(0);
            % Retrieve species concentration at node
            k=2; tleft=1;t=0;
            value.Time(k,:)=0;
            timeSmle=obj.getTimeSimulationDuration;%bug at time
            while(tleft>0 && obj.Errcode==0 && timeSmle~=t)
                [t, tleft]=obj.stepMSXQualityAnalysisTimeLeft;
                if ~isempty(varargin)
                    if t<3600 || t==3600
                        i=1;
                        for nl=ss
                            g=1;
                            for j=uu
                                value.Quality{i}(k,g)=obj.getMSXNodeInitqualValue{nl}(j);
                                g=g+1;
                            end
                            i=i+1;
                        end
                    else
                        i=1;
                        for nl=ss
                            g=1;
                            for j=uu
                                value.Quality{i}(k,g)=obj.getMSXSpeciesConcentration(0, nl, j);%node code0
                                g=g+1;
                            end
                            i=i+1;
                        end
                    end
                else
                    if t<3600 || t==3600
                        i=1;
                        for nl=ss
                            g=1;
                            for j=uu
                                value.Quality{i}(k,g)=obj.getMSXNodeInitqualValue{(nl)}(j);
                                g=g+1;
                            end
                            i=i+1;
                        end
                    else
                        i=1;
                        for nl=ss
                            g=1;
                            for j=uu
                                value.Quality{i}(k,g)=obj.getMSXSpeciesConcentration(0, (nl), j);%node code0
                                g=g+1;
                            end
                            i=i+1;
                        end
                    end
                end
                value.Time(k,:)=t;
                k=k+1;
            end
        end
        function value = getMSXComputedQualityLink(obj,varargin)
            if obj.getMSXSpeciesCount==0
                value=0;
                return;
            end
            if ~isempty(varargin)
                if length(varargin)==1
                    ss=varargin{1};%index link
                    uu=1:obj.getMSXSpeciesCount;
                elseif length(varargin)==2
                    ss=varargin{1};%index link
                    uu=varargin{2};%index species
                end
            else
                ss=1:obj.getLinkCount;%index link
                uu=1:obj.getMSXSpeciesCount;
            end
            value.Quality = cell(1,length(ss));
            % Obtain a hydraulic solution
            obj.solveMSXCompleteHydraulics(obj.MSXLibEPANET);
            % Run a step-wise water quality analysis without saving
            % RESULTS to file
            obj.initializeMSXQualityAnalysis(0);
            % Retrieve species concentration at node
            k=2;tleft=1;
            value.Time(k,:)=0;
            while(tleft>0 && obj.Errcode==0)
                [t, tleft]=obj.stepMSXQualityAnalysisTimeLeft;
                if ~isempty(varargin)
                    if t<3600 || t==3600
                        i=1;
                        for nl=ss
                            g=1;
                            for j=uu
                                value.Quality{i}(k,g)=obj.getMSXLinkInitqualValue{nl}(j);
                                g=g+1;
                            end
                            i=i+1;
                        end
                    else
                        i=1;
                        for nl=ss  
                            g=1;
                            for j=uu
                                value.Quality{i}(k,g)=obj.getMSXSpeciesConcentration(1, nl, j);
                                g=g+1;
                            end
                            i=i+1;
                        end
                    end
                else
                    if t<3600 || t==3600
                        i=1;
                        for nl=ss
                            g=1;
                            for j=uu
                                value.Quality{i}(k,g)=obj.getMSXLinkInitqualValue{(nl)}(j);
                                g=g+1;
                            end
                            i=i+1;
                        end
                    else
                        i=1;
                        for nl=ss
                            g=1;
                            for j=uu
                                value.Quality{i}(k,g)=obj.getMSXSpeciesConcentration(1, (nl), j);%link code1
                                g=g+1;
                            end
                            i=i+1;
                        end
                    end
                end
                value.Time(k,:)=t;
                k=k+1;
            end
        end
        function plotMSXSpeciesNodeConcentration(obj,varargin)
            s=obj.getMSXComputedQualityNode(varargin{1},varargin{2});
            nodesID=obj.getNodeNameID;
            SpeciesNameID=obj.getMSXSpeciesNameID;nd=1;
            for l=varargin{1}
                nodeID=nodesID(l);
                figure('Name',['NODE ',char(nodeID)]);
                for i=varargin{2}
                    specie(:,i)=s.Quality{nd}(:,i);
                    time(:,i)=s.Time; 
                end
                nd=nd+1;
                plot(time,specie);
                title(['NODE ',char(nodeID)]);
                ylabel('Quantity');
                xlabel('Time(s)');
                legend(SpeciesNameID(varargin{2}));
            end
        end
        function plotMSXSpeciesLinkConcentration(obj,varargin)
            s=obj.getMSXComputedQualityLink(varargin{1},varargin{2});
            linksID=obj.getLinkNameID;
            SpeciesNameID=obj.getMSXSpeciesNameID;nd=1;
            for l=varargin{1}
                linkID=linksID(l);
                figure('Name',['LINK ',char(linkID)]);
                for i=varargin{2}
                    specie(:,i)=s.Quality{nd}(:,i);
                    time(:,i)=s.Time;
                end
                nd=nd+1;
                plot(time,specie);
                title(['LINK ',char(linkID)]);
                ylabel('Quantity');
                xlabel('Time(s)');
                legend(SpeciesNameID(varargin{2}));
            end
        end
        function value = getMSXError(obj,Errcode)
            [obj.Errcode, value] = MSXgeterror(Errcode,obj.MSXLibEPANET);
        end
        function solveMSXCompleteHydraulics(obj,varargin)
            [obj.Errcode] = MSXsolveH(obj.MSXLibEPANET);
        end
        function solveMSXCompleteQuality(obj,varargin)
            [obj.Errcode] = MSXsolveQ(obj.MSXLibEPANET);
        end
        function writeMSXReport(obj,varargin)
            [obj.Errcode]=MSXreport(obj.MSXLibEPANET);
        end
        function [status,result] = writeMSXReportExe(obj, varargin)
            if isempty(varargin)
                rptfile=['@#',char(java.util.UUID.randomUUID),'.txt'];
            else
                rptfile=varargin{1};
            end
            [status,result] = runMSXexe(obj, rptfile);
        end
%         function value = getMSXComputedResultsBinary(obj)
%             uuID = char(java.util.UUID.randomUUID);
%             binfile=['@#',uuID,'.bin'];
%             obj.solveMSXCompleteHydraulics;
%             obj.saveHydraulicsOutputReportingFile;
%             obj.solveMSXCompleteQuality;
%             obj.saveMSXQualityFile(binfile);
%             value = readMSXBinaryFile(binfile);
%         end
%         function value = getMSXComputedResultsBinaryExe(obj)
%             uuID = char(java.util.UUID.randomUUID);
%             rptfile=['@#',uuID,'.txt'];
%             binfile=['@#',uuID,'.bin'];
%             runMSXexe(obj, rptfile, binfile);
%             value = readMSXBinaryFile(binfile);
%         end
        function index = addMSXPattern(obj,varargin)
            index=-1;
            if nargin==2
                [obj.Errcode] = MSXaddpattern(varargin{1},obj.MSXLibEPANET);
                [obj.Errcode, index] = MSXgetindex(obj.MSXLibEPANET,7,varargin{1});
            elseif nargin==3
                [obj.Errcode] = MSXaddpattern(varargin{1},obj.MSXLibEPANET);
                [obj.Errcode, index] = MSXgetindex(obj.MSXLibEPANET,7,varargin{1});
                setMSXPattern(obj,index,varargin{2});
            end
        end
        function setMSXSources(obj, nodeID, speciesID, sourcetype, concentration, patID)
            node = obj.getNodeIndex(nodeID);
            species = obj.getMSXSpeciesIndex(speciesID);
            type = find(strcmpi(obj.MSXTYPESOURCE,sourcetype))-2;
            pat = obj.getMSXPatternsIndex(patID);
            MSXsetsource(node, species, type, concentration, pat, obj.MSXLibEPANET);
        end
        function setMSXConstantsValue(obj, value)
            for i=1:length(value)
                [obj.Errcode] = MSXsetconstant(i, value(i), obj.MSXLibEPANET);
            end
        end
        function setMSXParametersTanksValue(obj, NodeTankIndex, paramindex, value)
            if ~sum(NodeTankIndex==obj.NodeTankIndex)
                fprintf('>> Invalid Tank Index <<\n');obj.NodeTankIndex
                return;
            end
            [obj.Errcode] = MSXsetparameter(0, NodeTankIndex, paramindex, value, obj.MSXLibEPANET);
        end
        function setMSXParametersPipesValue(obj, pipeIndex, value)
            for i=1:length(value)
                [obj.Errcode] = MSXsetparameter(1, pipeIndex, i, value(i), obj.MSXLibEPANET);
            end
        end
        function setMSXNodeInitqualValue(obj, value)
            for i=1:length(value)
                for j=1:size(value{1},2)
                    [obj.Errcode] = MSXsetinitqual(0, i, j, value{i}(j), obj.MSXLibEPANET);
                end
            end
        end
        function setMSXLinkInitqualValue(obj, value)
            for i=1:length(value)
                for j=1:size(value{1},2)
                    [obj.Errcode] = MSXsetinitqual(1, i, j, value{i}(j), obj.MSXLibEPANET);
                end
            end
        end
        function setMSXPattern(obj,pat,patternVector)
            if ischar(pat)
                pat=obj.getMSXPatternsIndex(pat);
            end
            nfactors=length(patternVector);
            [obj.Errcode] = MSXsetpattern(pat, patternVector, nfactors, obj.MSXLibEPANET);
        end
        function setMSXPatternMatrix(obj,patternMatrix)
            nfactors=size(patternMatrix,2);
            for i=1:size(patternMatrix,1)
                [obj.Errcode] = MSXsetpattern(i, patternMatrix(i,:), nfactors, obj.MSXLibEPANET);
            end
        end
        function setMSXPatternValue(obj,index, patternTimeStep, patternFactor)
            [obj.Errcode] = MSXsetpatternvalue(index, patternTimeStep, patternFactor, obj.MSXLibEPANET);
        end
        function setMSXTimeStep(obj,timestep)
            setMSXOptions(obj,'timestep',timestep);
        end
        function setMSXAreaUnitsFT2(obj)
            setMSXOptions(obj,'areaunits','FT2');
        end
        function setMSXAreaUnitsM2(obj)
            setMSXOptions(obj,'areaunits','M2');
        end
        function setMSXAreaUnitsCM2(obj)
            setMSXOptions(obj,'areaunits','CM2');
        end
        function setMSXRateUnitsSEC(obj)
            setMSXOptions(obj,'rateunits','SEC');
        end
        function setMSXRateUnitsMIN(obj)
            setMSXOptions(obj,'rateunits','MIN');
        end
        function setMSXRateUnitsHR(obj)
            setMSXOptions(obj,'rateunits','HR');
        end        
        function setMSXRateUnitsDAY(obj)
            setMSXOptions(obj,'rateunits','DAY');
        end
        function setMSXSolverEUL(obj)
            setMSXOptions(obj,'solver','EUL');
        end
        function setMSXSolverRK5(obj)
            setMSXOptions(obj,'solver','RK5');
        end        
        function setMSXSolverROS2(obj)
            setMSXOptions(obj,'solver','ROS2');
        end
        function setMSXCouplingFULL(obj)
            setMSXOptions(obj,'coupling','FULL');
        end
        function setMSXCouplingNONE(obj)
            setMSXOptions(obj,'coupling','NONE');
        end
        function setMSXCompilerNONE(obj)
            setMSXOptions(obj,'compiler','NONE');
        end
        function setMSXCompilerVC(obj)
            setMSXOptions(obj,'compiler','VC');
        end
        function setMSXCompilerGC(obj)
            setMSXOptions(obj,'compiler','GC');
        end
        function setMSXAtol(obj,atol)
            setMSXOptions(obj,'atol',atol);
        end
        function setMSXRtol(obj,rtol)
            setMSXOptions(obj,'rtol',rtol);
        end        
        function saveMSXQualityFile(obj,outfname)
            [obj.Errcode]=MSXsaveoutfile(outfname,obj.MSXLibEPANET);
        end
        function useMSXHydraulicFile(obj,hydname)
            [obj.Errcode]=MSXusehydfile(hydname,obj.MSXLibEPANET);
        end
        function initializeMSXQualityAnalysis(obj,flag)
            [obj.Errcode] = MSXinit(flag,obj.MSXLibEPANET);
        end
        function [t, tleft]= stepMSXQualityAnalysisTimeLeft(obj)
            [obj.Errcode, t, tleft] = MSXstep(obj.MSXLibEPANET);
        end
        function saveMSXFile(obj,msxname)
            [obj.Errcode] = MSXsavemsxfile(msxname,obj.MSXLibEPANET);
        end
        function msx = writeMSXFile(obj,msx)
            % Input Arguments
            % msx={};
            % msx.msxFile = 'networks/MSXFileName.msx';
            % % section Title
            % msx.titleDescription{1} = 'Example: MSXFile.';
            % % section Options
            % msx.options{1}='FT2'; %AREA_UNITS FT2/M2/CM2
            % msx.options{2}='DAY'; %TIME_UNITS SEC/MIN/HR/DAY
            % msx.options{3}='EUL'; %SOLVER EUL/RK5/ROS2
            % msx.options{4}='NONE'; %COUPLING FULL/NONE
            % msx.options{5}='NONE'; %COMPILER NONE/VC/GC
            % msx.options{6}=3600; %TIMESTEP in seconds
            % msx.options{7}=0.01;  %ATOL value
            % msx.options{8}=0.001;  %RTOL value
            % % section Species
            % % <type> <specieID> <units> (<atol> <rtol>)
            % msx.species{1}={'BULK'}; %type BULK/WALL
            % msx.species{2}={'CL2'}; %specieID
            % msx.species{3}={'MG'}; %units UG/MG
            % msx.species{4}={0.01}; %atol
            % msx.species{5}={0.001}; %rtol
            % 
            % % section Coefficients 
            % % CONSTANT name value % PARAMETER name value
            % msx.coefficients{1}={'PARAMETER','PARAMETER'}; 
            % msx.coefficients{2}={'Kb','Kw'}; 
            % msx.coefficients{3}={0.3,1}; 
            % 
            % % section Terms
            % % <termID> <expression>
            % msx.terms{1}={'Kf'}; % termID
            % msx.terms{2}={'1.5826e-4 * RE^0.88 / D'}; % expression
            % 
            % % section Pipes
            % % EQUIL <specieID> <expression>
            % % RATE <specieID> <expression>
            % % FORMULA <specieID> <expression>
            % msx.pipes{1} ={'RATE'}; %type
            % msx.pipes{2} ={'CL2'}; %specieID
            % msx.pipes{3} ={'-Kb*CL2 - (4/D)*Kw*Kf/(Kw+Kf)*CL2'}; %expression
            % 
            % % section Tanks
            % % EQUIL <specieID> <expression>
            % % RATE <specieID> <expression>
            % % FORMULA <specieID> <expression>
            % msx.tanks{1} ={'RATE'}; %type
            % msx.tanks{2} ={'CL2'}; %specieID
            % msx.tanks{3} ={'-Kb*CL2'}; %expression

            % % section Sources
            % % <type> <nodeID> <specieID> <strength> (<patternID>)
            % msx.sources{1}={''}; %CONC/MASS/FLOW/SETPOINT
            % msx.sources{2}={''}; %nodeID
            % msx.sources{3}={''}; %specieID
            % msx.sources{4}={''}; %strength
            % msx.sources{5}={''}; %patternID
            % 
            % % section Quality Global
            % % GLOBAL <specieID> <value>
            % msx.global{1} = {''};
            % msx.global{2} = {''};%specieID
            % msx.global{3} = {''};%value
            % % others
            % % NODE <nodeID> <bulkSpecieID> <value>
            % % LINK <linkID> <wallSpecieID> <value>
            % msx.quality{1} = {''}; %NODE/LINK
            % msx.quality{2} = {''}; %ID
            % msx.quality{3} = {''}; %bulkSpecieID/wallSpecieID
            % msx.quality{4} = {''}; %value
            % 
            % % section Parameters
            % % PIPE <pipeID> <paramID> <value>
            % % TANK <tankID> <paramID> <value>
            % msx.parameters{1} = {''};
            % msx.parameters{2} = {''};
            % msx.parameters{3} = {''};
            % msx.parameters{4} = {''};
            % 
            % % section Patterns
            % % <patternID> <multiplier> <multiplier> 
            % msx.patterns{1} = {''}; %patternID
            % msx.patterns{2} = {''}; %multiplier
            space=5;
            f = writenewTemp(msx.msxFile);
            fprintf(f,'[TITLE]\n');
            if isfield(msx,'titleDescription')
                for i=1:length(msx.titleDescription)
                    fprintf(f,msx.titleDescription{i});
                end
            end

            fprintf(f,'\n\n[OPTIONS]\n');
            options = {'AREA_UNITS', 'RATE_UNITS', 'SOLVER', 'COUPLING', 'COMPILER',...
                'TIMESTEP', 'ATOL', 'RTOL'};
            spaces=blanks(space);
            if isfield(msx,'options')
                for i=1:length(msx.options)
                    fprintf(f,num2str(options{i}));
                    fprintf(f,spaces);
                    fprintf(f,num2str(msx.options{i}));
                    fprintf(f,'\n');
                end
            end

            fprintf(f,'\n[SPECIES]\n');
            if isfield(msx,'species')
                for u=1:length(msx.species{1})
                    for i=1:length(msx.species)
                        if isnumeric(msx.species{i}{u})
                            fprintf(f,num2str(msx.species{i}{u}));
                        else
                            fprintf(f,num2str(char(msx.species{i}{u})));
                        end
                        fprintf(f,spaces);
                    end
                    fprintf(f,'\n');
                end
            end
            fprintf(f,'\n[COEFFICIENTS]\n');
            if isfield(msx,'coefficients')
                for u=1:length(msx.coefficients{1})
                    for i=1:length(msx.coefficients)
                        if isnumeric(msx.coefficients{i}{u})
                            fprintf(f,num2str(msx.coefficients{i}{u}));
                        else
                            fprintf(f,num2str(char(msx.coefficients{i}{u})));
                        end
                        fprintf(f,spaces);
                    end
                    fprintf(f,'\n');
                end
            end

            fprintf(f,'\n[TERMS]\n');
            if isfield(msx,'terms')
                for u=1:length(msx.terms{1})
                    for i=1:length(msx.terms)
                        if isnumeric(msx.terms{i}{u})
                            fprintf(f,num2str(msx.terms{i}{u}));
                        else
                            fprintf(f,num2str(char(msx.terms{i}{u})));
                        end
                        fprintf(f,spaces);
                    end
                    fprintf(f,'\n');
                end
            end

            fprintf(f,'\n[PIPES]\n');
            if isfield(msx,'pipes')
                for u=1:length(msx.pipes{1})
                    for i=1:length(msx.pipes)
                        if isnumeric(msx.pipes{i}{u})
                            fprintf(f,num2str(msx.pipes{i}{u}));
                        else
                            fprintf(f,num2str(char(msx.pipes{i}{u})));
                        end
                        fprintf(f,spaces);
                    end
                    fprintf(f,'\n');
                end
            end

            fprintf(f,'\n[TANKS]\n');
            if isfield(msx,'tanks')
                for u=1:length(msx.tanks{1})
                    for i=1:length(msx.tanks)
                        if isnumeric(msx.tanks{i}{u})
                            fprintf(f,num2str(msx.tanks{i}{u}));
                        else
                            fprintf(f,num2str(char(msx.tanks{i}{u})));
                        end
                        fprintf(f,spaces);
                    end
                    fprintf(f,'\n');
                end
            end

            fprintf(f,'\n[SOURCES]\n');
            if isfield(msx,'sources')
                for u=1:length(msx.sources{1})
                    for i=1:length(msx.sources)
                        if isnumeric(msx.sources{i}{u})
                            fprintf(f,num2str(msx.sources{i}{u}));
                        else
                            fprintf(f,num2str(char(msx.sources{i}{u})));
                        end
                        fprintf(f,spaces);
                    end
                    fprintf(f,'\n');
                end
            end

            fprintf(f,'\n[QUALITY]\n');
            if isfield(msx,'global')
                for u=1:length(msx.global{1})
                    for i=1:length(msx.global)
                        if isnumeric(msx.global{i}{u})
                            fprintf(f,num2str(msx.global{i}{u}));
                        else
                            fprintf(f,num2str(char(msx.global{i}{u})));
                        end
                        fprintf(f,spaces);
                    end
                    fprintf(f,'\n');
                end
            end
            if isfield(msx,'quality')
                for u=1:length(msx.quality{1})
                    for i=1:length(msx.quality)
                        if isnumeric(msx.quality{i}{u})
                            fprintf(f,num2str(msx.quality{i}{u}));
                        else
                            fprintf(f,num2str(char(msx.quality{i}{u})));
                        end
                        fprintf(f,spaces);
                    end
                    fprintf(f,'\n');
                end
            end

            fprintf(f,'[PARAMETERS]\n');
            if isfield(msx,'parameters')
                for u=1:length(msx.parameters{1})
                    for i=1:length(msx.parameters)
                        if isnumeric(msx.parameters{i}{u})
                            fprintf(f,num2str(msx.parameters{i}{u}));
                        else
                            fprintf(f,num2str(char(msx.parameters{i}{u})));
                        end
                        fprintf(f,spaces);
                    end
                    fprintf(f,'\n');
                end
            end

            fprintf(f,'[PATTERNS]\n');
            if isfield(msx,'patterns')
                for u=1:length(msx.patterns{1})
                    for i=1:length(msx.patterns)
                        if isnumeric(msx.patterns{i}{u})
                            fprintf(f,num2str(msx.patterns{i}{u}));
                        else
                            fprintf(f,num2str(char(msx.patterns{i}{u})));
                        end
                        fprintf(f,spaces);
                    end
                    fprintf(f,'\n');
                end
            end

            fprintf(f,'[REPORT]\n');
            fprintf(f,'NODES ALL\n');
            fprintf(f,'LINKS ALL\n');
            fclose(f);
        end
        function unloadMSX(obj)
            MSXclose(obj);
            MSXMatlabCleanup(obj);
        end
        function ToolkitConstants = getToolkitConstants(obj)
            file = [obj.LibEPANETpath,obj.LibEPANET,'.h'];
            if isdeployed
                file=[file(1:end-1),'txt'];%epanet2.h-->epanet2.txt
            end
            fid = fopen(file);
            tline = fgetl(fid);
            i=1; constants={};
            while ischar(tline)
               if ~isempty(regexp(tline,'typedef enum','match'))
                   tline = fgetl(fid);
                   while isempty(regexp(tline,'}','match')) || isempty(tline)
                       while isempty(tline)
                           tline = fgetl(fid);
                       end
                       n = regexp(tline, {'\w*EN_\w*','\d*'}, 'match');
                       constants(i) = n{1};
                       codes(i) = str2num(n{2}{end}); 
                       ToolkitConstants.(constants{i}) = codes(i);
                       i=i+1;
                       tline = fgetl(fid);
                   end
               else
                   n = regexp(tline, {'\w*EN_\w*','\d*'}, 'match');
                   if sum(cellfun(@isempty,n)), tline = fgetl(fid); continue; end
                   if length(constants)>118, break; end %temporary
                   constants(i) = n{1};
                   codes(i) = str2num(n{2}{1}); 
                   ToolkitConstants.(constants{i}) = codes(i);
                   i=i+1;
                   tline = fgetl(fid);
               end
            end
            fclose(fid);
        end
        function obj = BinUpdateClass(obj)
            sect=0;i=1;t=1;q=1;
            typecode=0;x=1;b=1;d=1;
            if obj.Bin
                obj.saveInputFile(obj.BinTempfile);
            end
            obj.BinUnits_SI_Metric=0; obj.BinUnits_US_Customary=0;
            [~,info] = obj.readInpFile;
            for hc=1:length(info)
                tline = info{hc};
                if ~ischar(tline),   break,   end
                % Get first token in the line
                tok = strtok(tline);
                % Skip blank Clines and comments
                if isempty(tok), continue, end
                if (tok(1) == ';'), continue, end
                if (tok(1) == '[')
                    % [JUNCTIONS] section
                    if strcmpi(tok(1:5),'[JUNC')
                        sect=1;k=1;
                        obj.BinNodeJunctionNameID={};
                        obj.BinNodeJunctionIndex=[];
                        obj.BinNodeJunctionElevation=[];
                        obj.BinNodeType={};
                        obj.BinNodeJunctionsBaseDemands=[];
                        obj.BinNodeJunctionsBaseDemandsID={};
                        obj.BinNodeJunDemandPatternNameID={};
                        continue;
                        % [RESERVOIRS] section
                    elseif strcmpi(tok(1:5),'[RESE')
                        sect=2;r=1;
                        obj.BinNodeReservoirNameID={};
                        obj.BinNodeReservoirIndex=[];
                        obj.BinNodeReservoirElevation=[];
                        obj.BinNodeResDemandPatternNameID={};
                        continue;
                        % [TANKS] section
                    elseif strcmpi(tok(1:5),'[TANK')
                        sect=3;p=1;
                        obj.BinNodeTankNameID={};
                        obj.BinNodeTankIndex=[];
                        obj.BinNodeTankElevation=[];
                        obj.BinNodeTankInitialLevel=[]; 
                        obj.BinNodeTankMinimumWaterLevel=[];  
                        obj.BinNodeTankMaximumWaterLevel=[]; 
                        obj.BinNodeTankDiameter=[];  
                        obj.BinNodeTankMinimumWaterVolume=[];
                        continue;
                        % [PIPES] section
                    elseif strcmpi(tok(1:5),'[PIPE')
                        sect=4;
                        obj.BinLinkPipeNameID={};
                        obj.BinLinkPipeIndex=[];
                        obj.BinLinkFromNode={};
                        obj.BinLinkToNode={};
                        obj.BinLinkPipeLengths=[];
                        obj.BinLinkPipeDiameters=[];
                        obj.BinLinkPipeRoughness=[];
                        obj.BinLinkPipeMinorLoss=[];
                        obj.BinLinkType={};
                                               
                        obj.BinNodeJunctionCount = length(obj.BinNodeJunctionNameID); 
                        obj.BinNodeReservoirCount = length(obj.BinNodeReservoirNameID); 
                        obj.BinNodeTankCount = length(obj.BinNodeTankNameID); 
                        obj.BinNodeTankReservoirCount = obj.BinNodeReservoirCount + obj.BinNodeTankCount;
                        obj.BinNodeNameID=[obj.BinNodeJunctionNameID obj.BinNodeReservoirNameID obj.BinNodeTankNameID];
                        obj.BinNodeCount=obj.BinNodeJunctionCount+obj.BinNodeTankReservoirCount;
                        obj.BinNodeInitialQuality=zeros(1,obj.BinNodeCount);  
                        continue;
                        % [PUMPS] section
                    elseif strcmpi(tok(1:5),'[PUMP')
                        sect=5;
                        obj.BinLinkPumpNameID={};
                        obj.BinLinkPumpIndex=[];
                        obj.BinLinkPumpPatterns={};
                        obj.BinLinkPumpPower=[];
                        obj.BinLinkPumpNameIDPower={};
                        continue;
                        % [VALVES] section
                    elseif strcmpi(tok(1:5),'[VALV')
                        sect=6;
                        obj.BinLinkValveNameID={};
                        obj.BinLinkValveIndex=[];
                        obj.BinLinkValveDiameters=[];
                        obj.BinLinkValveType={};
                        obj.BinLinkValveSetting=[];
                        obj.BinLinkValveMinorLoss=[];                        
                        continue;
                        % [CURVES] section
                    elseif strcmpi(tok(1:5),'[CURV')
                        sect=7;
                        obj.BinCurveAllLines={};
                        obj.BinCurveXvalue=[];
                        obj.BinCurveYvalue=[];
                        obj.BinCurveAllLines={};
                        continue;
                        % [DEMANDS] section
                    elseif strcmpi(tok(1:5),'[DEMA') %&& max(obj.BinNodeJunctionsBaseDemands)==0
                        sect=8;d=1;pd=1;                     
                        continue;
                        % [STATUS] section
                    elseif strcmpi(tok(1:5),'[STAT')
                        sect=9;d=1;
                        obj.BinLinkInitialStatus={};
                        obj.BinLinkInitialStatusNameID={};
                        obj.BinCountStatuslines=0;
                        continue;
                        % [PATTERNS]
                    elseif strcmpi(tok(1:5),'[PATT')
                        sect=10;
                        obj.BinPatternLengths=[];
                        obj.BinPatternNameID={};
                        obj.BinPatternValue={};
                        obj.BinCountPatternlines=0;d=1;h=1;
                        continue;                    
                        % [CONTROLS] section
                    elseif strcmpi(tok(1:5),'[CONT')
                        sect=11;d=1;
                        obj.BinControlsInfo={};
                        obj.BinControlLinksID={};
                        obj.BinControlNodesID={};
                        obj.BinPatternCount=length(obj.BinPatternNameID);
                        tmpmaxlen=max(obj.BinPatternLengths);
                        obj.BinPatternMatrix=nan(obj.BinPatternCount,tmpmaxlen);
                        for i=1:obj.BinPatternCount
                            tmplength=obj.BinPatternLengths(i);
                            for j=1:tmplength
                                obj.BinPatternMatrix(i,j)=single(obj.BinPatternValue{i}(j));
                            end
                            if tmplength<tmpmaxlen
                                for j=(tmplength+1):tmpmaxlen
                                    obj.BinPatternMatrix(i,j)=obj.BinPatternMatrix(i,j-tmplength);
                                end
                            end
                        end
                        continue;
                        % [RULES] section
                    elseif strcmpi(tok(1:5),'[RULE')
                        sect=20;d=1;obj.BinRulesCount=0; 
                        obj.BinRulesControlsInfo={};
                        obj.BinRulesControlLinksID={};
                        obj.BinRulesControlNodesID={};
                        continue;
                        % [QUALITY] section
                    elseif strcmpi(tok(1:5),'[QUAL')
                        sect=12;d=1;
                        obj.BinCountInitialQualitylines=0;
                        continue;
                        % [SOURCES] section
                    elseif strcmpi(tok(1:5),'[SOUR')
                        sect=13;
                        obj.BinNodeSourcePatternIndex = nan(1,obj.BinNodeCount);
                        obj.BinNodeSourceQuality = nan(1,obj.BinNodeCount);
                        obj.BinNodeSourceTypeIndex = nan(1,obj.BinNodeCount);
                        obj.BinNodeSourceType = cell(1,obj.BinNodeCount);
                        obj.BinNodeSourcePatternNameID = cell(1,obj.BinNodeCount);
                        continue;
                        % [MIXING] section
                    elseif strcmpi(tok(1:5),'[MIXI')
                        sect=14;d=1;
                        obj.BinNodeTankMixModel={};
                        obj.BinNodeTankMixID={};
                        obj.BinNodeTankMinimumFraction=[];
                        continue;
                        % [REACTIONS] section
                    elseif strcmpi(tok(1:5),'[REAC')
                        sect=15;d=1;
                        obj.BinLinkGlobalBulkReactionCoeff=[];
                        obj.BinLinkGlobalWallReactionCoeff=[];
                        obj.BinLinkBulkReactionCoeff=[];
                        obj.BinLinkWallReactionCoeff=[];
                        obj.BinCountReactionlines=0;                        
                        continue;
                        % [TIMES] section
                    elseif strcmpi(tok(1:5),'[TIME')
                        sect=16;d=1;
                        obj.BinTimeSimulationDuration=[];
                        obj.BinTimeHydraulicStep=[];
                        obj.BinTimeQualityStep=[];
                        obj.BinTimePatternStep=[];
                        obj.BinTimePatternStart=[];
                        obj.BinTimeReportingStep=[];
                        obj.BinTimeReportingStart=[];
                        obj.BinTimeStatisticsIndex=[];
                        obj.BinTimeStatistics='';
                        continue;        
                        % [OPTIONS] section
                    elseif strcmpi(tok(1:5),'[OPTI')
                        sect=17;
                        vx = NaN(obj.BinNodeCount,1);
                        vy = NaN(obj.BinNodeCount,1);
                        vertx = cell(obj.BinLinkCount,1);
                        verty = cell(obj.BinLinkCount,1);
                        indexV=1;
                        obj.BinLinkFlowUnits={};
                        obj.BinOptionsHeadloss={};
                        obj.BinNodePressureUnits={};
                        obj.BinOptionsSpecificGravity=[];
                        obj.BinOptionsViscosity=[];
                        obj.BinOptionsMaxTrials=[];
                        obj.BinOptionsAccuracyValue=[];
                        obj.BinOptionsUnbalanced={};
                        obj.BinOptionsPattern=[];
                        obj.BinOptionsPatternDemandMultiplier=[];
                        obj.BinOptionsEmitterExponent=[];
                        obj.BinQualityType={};
                        obj.BinQualityCode=[];
                        obj.BinQualityTraceNodeIndex=[];
                        obj.BinQualityTraceNodeID={};
                        obj.BinQualityUnits={};
                        obj.BinOptionsDiffusivity=[];
                        obj.BinOptionsQualityTolerance=[];
                        
                        obj.BinLinkPipeCount = length(obj.BinLinkPipeNameID);
                        obj.BinLinkPumpCount = length(obj.BinLinkPumpNameID);
                        obj.BinLinkValveCount = length(obj.BinLinkValveNameID);
                        
                        obj.BinLinkNameID=[obj.BinLinkPipeNameID obj.BinLinkPumpNameID obj.BinLinkValveNameID];
                        obj.BinLinkCount=obj.BinLinkPipeCount+obj.BinLinkPumpCount+obj.BinLinkValveCount;
                        continue;
                        % [COORDINATES] section
                    elseif strcmpi(tok(1:5),'[COOR')
                        sect=18;
                        continue;
                        % [VERTICES] section
                    elseif strcmpi(tok(1:5),'[VERT')
                        sect=19;
                        continue;
                        % [END]
                    elseif strcmpi(tok(1:4),'[END')
                        break;
                    else
                        sect = 0;
                        continue;
                    end
                end
                clear atline;
                atline = checktlines(tline);
                if sect==0
                    continue;
                    % Nodes
                elseif sect==1                 
                    obj.BinNodeJunctionNameID{k}=atline{1};
                    obj.BinNodeJunctionIndex(k)=k;
                    obj.BinNodeJunctionElevation(k)=str2num(atline{2});
                    if length(atline)>2
                        if ~isempty(atline{3}) && ~sum(atline{3}==';')
                            obj.BinNodeJunctionsBaseDemands(k)=str2num(atline{3});
                            if length(atline)>3
                                if ~sum(atline{4}==';')
                                    obj.BinNodeJunDemandPatternNameID{k}=atline{4};
                                else
                                    obj.BinNodeJunDemandPatternNameID{k}='';
                                end
                            else
                                obj.BinNodeJunDemandPatternNameID{k}='';
                            end
                        end
                    end
                    k=k+1;
                elseif sect==2
                    obj.BinNodeReservoirNameID{r}=atline{1};
                    obj.BinNodeReservoirIndex(r)=k;
                    obj.BinNodeReservoirElevation(r)=str2num(atline{2});
                    if length(atline)>2
                        if ~isempty(atline{3}) && ~sum(atline{3}==';')
                            obj.BinNodeResDemandPatternNameID{r}=atline{3};
                        else
                            obj.BinNodeResDemandPatternNameID{r}='';
                        end
                    else
                        obj.BinNodeResDemandPatternNameID{r}='';
                    end
                    k=k+1;
                    r=r+1;
                elseif sect==3
                    obj.BinNodeTankNameID{p}=atline{1};
                    obj.BinNodeTankIndex(p)=k;
                    obj.BinNodeTankElevation(p)=str2num(atline{2});
                    obj.BinNodeTankInitialLevel(p)=single(str2num(atline{3}));
                    obj.BinNodeTankMinimumWaterLevel(p)=str2num(atline{4});
                    obj.BinNodeTankMaximumWaterLevel(p)=single(str2num(atline{5}));
                    obj.BinNodeTankDiameter(p)=str2num(atline{6});
                    obj.BinNodeTankMinimumWaterVolume(p)=single(str2num(atline{7}));
                    k=k+1;
                    p=p+1;
                    % Links
                elseif sect==4
                    obj.BinLinkPipeNameID{t}=atline{1};
                    obj.BinLinkPipeIndex(t)=t;
                    obj.BinLinkFromNode{t}=atline{2};
                    obj.BinLinkToNode{t}=atline{3};
                    obj.BinLinkPipeLengths(t)=str2num(atline{4});
                    obj.BinLinkPipeDiameters(t)=str2num(atline{5});
                    obj.BinLinkPipeRoughness(t)=str2num(atline{6});
                    obj.BinLinkPipeMinorLoss(t)=str2num(atline{7});
                    BinCNameID={};
                    if length(atline)>7
                        obj.BinLinkPipeStatus{t}=atline{8};
                    else
                        obj.BinLinkPipeStatus{t}='Open';
                    end
                    t=t+1;
                elseif sect==5
                    obj.BinLinkPumpNameID{q}=atline{1};
                    obj.BinLinkPumpIndex(q)=t;
                    obj.BinLinkFromNode{t}=atline{2};
                    obj.BinLinkToNode{t}=atline{3};
                    if strcmp(regexp(tline,'\w*HEAD*\w','match'),'HEAD')
                        obj.BinLinkPumpCurveNameID{q}=atline{5};
                    elseif strcmp(regexp(tline,'\w*POWER*\w','match'),'POWER')
                        obj.BinLinkPumpPower(q)=str2num(atline{5});
                        obj.BinLinkPumpNameIDPower{q}=atline{1};
                    end
                    if length(atline)>6
                        obj.BinLinkPumpPatterns{q}=atline{7};
                    end
                    t=t+1;
                    q=q+1;
                elseif sect==6
                    obj.BinLinkValveNameID{i}=atline{1};
                    obj.BinLinkValveIndex(i)=t;
                    obj.BinLinkFromNode{t}=atline{2};
                    obj.BinLinkToNode{t}=atline{3};
                    obj.BinLinkValveDiameters(i)=str2num(atline{4});
                    obj.BinLinkValveType{i}=atline{5};
                    obj.BinLinkValveSetting(i)=str2num(atline{6});
                    if length(atline)>6
                        obj.BinLinkValveMinorLoss(i)=str2num(atline{7});
                    end
                    t=t+1;
                    i=i+1;
                    % Curves
                elseif sect==7
                    ee=regexp(tline,'\w*EFFICIENCY*\w','match');
                    nn=regexp(tline,'\w*VOLUME*\w','match');
                    kk=regexp(tline,'\w*HEADLOSS*\w','match');

                    if strcmp(ee,'EFFICIENCY'), typecode=1;   % EFFICIENCY
                        obj.BinCurveAllLines{b}=tline;b=b+1;continue;
                    elseif strcmp(nn,'VOLUME'), typecode=2;   % VOLUME
                        obj.BinCurveAllLines{b}=tline;b=b+1;continue;
                    elseif strcmp(kk,'HEADLOSS'), typecode=3; % HEADLOSS
                        obj.BinCurveAllLines{b}=tline;b=b+1;continue;
                    elseif (~length(strcmp(nn,'VOLUME')) || ~length(strcmp(ee,'EFFICIENCY')) || ~length(strcmp(kk,'HEADLOSS'))) &&  (tok(1)==';'), typecode=0; % HEADLOSS
                        obj.BinCurveAllLines{b}=tline;b=b+1;continue;
                    else
                        obj.BinCurveTypes(x)=typecode;
                    end
                    a = textscan(tline,'%s %f %f');l=1;
                    aa = regexp(tline, '\s*','split');
                    if isempty(aa{l})
                        l=l+1;
                    end
                    BinCNameID{x}=aa{l};
                    obj.BinCurveXvalue(x)=a{2};
                    obj.BinCurveYvalue(x)=a{3};
                    obj.BinCurveAllLines{b}=tline;
                    x=x+1;b=b+1;
                    % Demands
                elseif sect==8
                    indd=find(strcmpi(obj.BinNodeNameID,atline{1}));
                    if ~isempty(obj.BinNodeJunctionsBaseDemandsID)
                        if strcmp(obj.BinNodeJunctionsBaseDemandsID{end},atline{1})
                            pd=pd+1;obj.BinNodeJunctionsBaseDemands(indd)=single(str2num(atline{2})); 
                        else
                            obj.BinNodeJunctionsBaseDemands(indd)=single(str2num(atline{2})); pd=1;
                        end
                    else
                        obj.BinNodeJunctionsBaseDemands(indd)=single(str2num(atline{2})); pd=1;
                    end                    
                    if length(atline)>2
                        if ~isempty(obj.BinNodeJunctionsBaseDemandsID)
                            if strcmp(obj.BinNodeJunctionsBaseDemandsID{end},atline{1})
                                obj.BinNodeJunDemandPatternNameID{indd}=atline{3};
                            else
                                obj.BinNodeJunDemandPatternNameID{indd}=atline{3}; 
                            end
                        else
                            obj.BinNodeJunDemandPatternNameID{indd}=atline{3};
                        end
                    else
                        obj.BinNodeJunDemandPatternNameID{indd}='';
                    end
                    obj.BinNodeJunctionsBaseDemandsID{d}=atline{1};                       
                    d=d+1;
                    % Status
                elseif sect==9
                    obj.BinLinkInitialStatus{d}=atline{2};
                    obj.BinLinkInitialStatusNameID{d}=atline{1};
                    obj.BinCountStatuslines=d;
                    d=d+1;
                    % Patterns
                elseif sect==10
                    obj.BinPatternNameID{d}=atline{1};
                    dd=length(obj.BinPatternNameID);
                    obj.BinPatternNameID=unique(obj.BinPatternNameID); 
                    d=length(obj.BinPatternNameID);
                    if dd>1 && dd~=d
                        obj.BinPatternLengths(d)=length(atline(2:end))+obj.BinPatternLengths(d);
                        obj.BinPatternValue{d}=single([obj.BinPatternValue{d} str2num(char(atline(2:end)))']);
                    else
                        obj.BinPatternLengths(d)=length(atline(2:end));
                        obj.BinPatternValue{d}=single(str2num(char(atline(2:end)))');
                    end
                    obj.BinCountPatternlines=h;
                    d=d+1;h=h+1;                
                    % Controls
                elseif sect==11
                    obj.BinControlsInfo{d}=atline;
                    obj.BinControlLinksID{d}=atline{2};
                    t = regexp(tline, '\w*TIME\w*','match');
                    if length(t)==0
                        obj.BinControlNodesID{d}=atline{6};
                    end
                    d=d+1;
                    % Rules
                elseif sect==20
                    if strcmpi(atline{1},{'RULE'})
                        obj.BinRulesCount=obj.BinRulesCount+1;d=1;
                    end
                    obj.BinRulesControlsInfo{obj.BinRulesCount}{d}=atline;
                    
                    if sum(strcmpi(atline{2},{'LINK','PIPE','PUMP','VALVE'}))
                        obj.BinRulesControlLinksID{obj.BinRulesCount}{d}=atline{3}; 
                    elseif sum(strcmpi(atline{2},{'NODE','JUNCTION','RESERVOIR','TANK'}))
                        obj.BinRulesControlNodesID{obj.BinRulesCount}{d}=atline{3}; 
                    end
                    d=d+1;     
                    % Quality
                elseif sect==12
                    h=find(strcmpi(obj.BinNodeNameID,atline{1}));
                    obj.BinNodeInitialQuality(h)=str2num(atline{2});
                    obj.BinCountInitialQualitylines=d;
                    d=d+1;
                    % Sources
                elseif sect==13
                    indexPat=find(strcmpi(obj.BinPatternNameID,atline{1}));
                    indexNode=find(strcmpi(obj.BinNodeNameID,atline{1}));
                    if length(atline)>3
                        obj.BinNodeSourcePatternIndex(indexPat)= find(strcmpi(obj.BinPatternNameID,atline{4}));
                        obj.BinNodeSourcePatternNameID{indexNode}=atline{4};
                    end
                    obj.BinNodeSourceQuality(indexNode)=str2num(atline{3});
                    obj.BinNodeSourceTypeIndex(indexNode)=find((strcmpi(obj.TYPESOURCE,atline{2})-1)>-1)-1;
                    obj.BinNodeSourceType{indexNode}=obj.TYPESOURCE{obj.BinNodeSourceTypeIndex(indexNode)+1};
                    % Mixing
                elseif sect==14
                    obj.BinNodeTankMixID{d}=atline{1};
                    obj.BinNodeTankMixModel{d}=atline{2};
                    obj.BinNodeTankMinimumFraction(d)=str2num(atline{3});
                    d=d+1;
                    % Reactions
                elseif sect==15
                    if strcmpi(atline{1},'GLOBAL') && strcmpi(atline{2},'BULK')
                        obj.BinLinkGlobalBulkReactionCoeff=str2num(atline{3});
                    elseif strcmpi(atline{1},'GLOBAL') && strcmpi(atline{2},'WALL')
                        obj.BinLinkGlobalWallReactionCoeff=str2num(atline{3});
                        obj.BinLinkWallReactionCoeff=obj.BinLinkGlobalWallReactionCoeff*ones(1,obj.BinLinkCount);
                        obj.BinLinkBulkReactionCoeff=obj.BinLinkGlobalBulkReactionCoeff*ones(1,obj.BinLinkCount);
                        obj.BinLinkWallReactionCoeff(obj.BinLinkPumpIndex)=0;
                        obj.BinLinkWallReactionCoeff(obj.BinLinkValveIndex)=0;
                        obj.BinLinkBulkReactionCoeff(obj.BinLinkPumpIndex)=0;
                        obj.BinLinkBulkReactionCoeff(obj.BinLinkValveIndex)=0;
                    end
                    if strcmpi(atline{1},'BULK')
                        LinkIndex = find(strcmpi(obj.BinLinkNameID,atline{2}));
                        obj.BinLinkBulkReactionCoeff(LinkIndex)=str2num(atline{3});
                    elseif strcmpi(atline{1},'WALL')
                        LinkIndex = find(strcmpi(obj.BinLinkNameID,atline{2}));
                        obj.BinLinkWallReactionCoeff(LinkIndex)=str2num(atline{3});
                    end
                    obj.BinCountReactionlines=d;
                    d=d+1;
                    % Times
                elseif sect==16
                    r=atline{2};
                    if length(atline)>2 
                        if find(~strcmpi(atline{end},{'HOURS','MIN','SECONDS','MINUTES','DAYS'})==0)
                            r=atline{end-1};
                        else
                            r=atline{end};
                        end
                    end
                    obj = getTimes(obj, r, atline, obj);                
                    % Options
                elseif sect==17
                    obj = getOptionsValues(obj, obj, atline);
                    % Coordinates
                elseif sect==18
                    A = textscan(tline,'%s %f %f');
                    % get the node index
                    a=strcmp(A{1},obj.BinNodeNameID);
                    index=strfind(a,1);
                    if isempty(index), return; end
                    vx(index) = A{2};
                    vy(index) = A{3};
                    % Vertices
                elseif sect==19
                    A = textscan(tline,'%s %f %f');
                    if isempty(A), return;  end
                    vertx(indexV) = A(2);
                    verty(indexV) = A(3);
                    indexV = indexV + 1;
                end
            end
            if ~sum(obj.BinLinkBulkReactionCoeff)
                if isempty(obj.BinLinkGlobalBulkReactionCoeff), obj.BinLinkGlobalBulkReactionCoeff=0;end
                obj.BinLinkBulkReactionCoeff=obj.BinLinkGlobalBulkReactionCoeff*ones(1,obj.BinLinkCount);
                obj.BinLinkBulkReactionCoeff(obj.BinLinkPumpIndex)=0;
                obj.BinLinkBulkReactionCoeff(obj.BinLinkValveIndex)=0;
            end
            if ~sum(obj.BinLinkWallReactionCoeff)
                if isempty(obj.BinLinkGlobalWallReactionCoeff), obj.BinLinkGlobalWallReactionCoeff=0;end
                obj.BinLinkWallReactionCoeff=obj.BinLinkGlobalWallReactionCoeff*ones(1,obj.BinLinkCount);
                obj.BinLinkWallReactionCoeff(obj.BinLinkPumpIndex)=0;
                obj.BinLinkWallReactionCoeff(obj.BinLinkValveIndex)=0;
            end
            obj.BinNodeCoordinates{1} = vx;
            obj.BinNodeCoordinates{2} = vy;
            obj.BinNodeCoordinates{3} = vertx;
            obj.BinNodeCoordinates{4} = verty;
            obj.BinNodeType(obj.BinNodeJunctionIndex)=obj.TYPENODE(1);
            obj.BinNodeType(obj.BinNodeReservoirIndex)=obj.TYPENODE(2);
            obj.BinNodeType(obj.BinNodeTankIndex)=obj.TYPENODE(3);
            
            obj.BinLinkType(obj.BinLinkPipeIndex)=obj.TYPELINK(2);
            obj.BinLinkType(obj.BinLinkPumpIndex)=obj.TYPELINK(3);
            obj.BinLinkType(obj.BinLinkValveIndex)=obj.BinLinkValveType;
            
            obj.BinLinkSettings = [obj.BinLinkPipeRoughness zeros(1,obj.BinLinkPumpCount) obj.BinLinkValveSetting]';
            obj.BinNodeElevations = single([obj.BinNodeJunctionElevation obj.BinNodeReservoirElevation obj.BinNodeTankElevation]);
            obj.BinLinkDiameters = single([obj.BinLinkPipeDiameters zeros(1,obj.BinLinkPumpCount) obj.BinLinkValveDiameters]);
            obj.BinLinkLengths = single([obj.BinLinkPipeLengths zeros(1,obj.BinLinkPumpCount) zeros(1,obj.BinLinkValveCount)]);
            obj.BinLinkRoughnessCoeff = [obj.BinLinkPipeRoughness zeros(1,obj.BinLinkPumpCount) zeros(1,obj.BinLinkValveCount)];
%             obj.BinNodeJunctionsBaseDemands(length(obj.BinNodeJunctionsBaseDemands):obj.BinNodeJunctionCount)=0;
            obj.BinNodeBaseDemands = single([obj.BinNodeJunctionsBaseDemands zeros(1,obj.BinNodeReservoirCount) zeros(1,obj.BinNodeTankCount)]);
%             obj.BinNodeJunDemandPatternNameID=[obj.BinNodeJunDemandPatternNameID obj.BinNodeResDemandPatternNameID];
%             for i=obj.BinNodeTankIndex
%                obj.BinNodeDemandPatternNameID{i}=''; 
%             end
            
            b={};
            for i=1:obj.BinLinkCount
                ind=find((strcmp(obj.BinLinkInitialStatusNameID,obj.BinLinkNameID{i}))==1);
                if isempty(ind), ind=0; end
                if ind~=0 
                    if sum(obj.BinLinkPumpIndex==i)
                        bb{i}=obj.BinLinkInitialStatus{ind};
                        r=obj.BinLinkNameID(i);
                        b{i}=r{1};
                    else
                        b{i}=obj.BinLinkNameID{i};
                        bb{i}=obj.BinLinkInitialStatus{ind};
                    end
                else
                    b{i}=obj.BinLinkNameID{i};
                    bb{i}='Open';
                end
            end
            obj.BinLinkInitialStatusNameID=b;
            obj.BinLinkInitialStatus=bb;
            if ~isempty(obj.BinLinkPumpIndex)
                obj.BinLinkPumpStatus=obj.BinLinkInitialStatus(obj.BinLinkPumpIndex);
                obj.BinLinkPumpStatusNameID=obj.BinLinkInitialStatusNameID(obj.BinLinkPumpIndex);
            end
            if ~isempty(obj.BinLinkPumpIndex)
                obj.BinLinkValveStatus=obj.BinLinkInitialStatus(obj.BinLinkValveIndex);
                obj.BinLinkValveStatusNameID=obj.BinLinkInitialStatusNameID(obj.BinLinkValveIndex);
            end
        
            if ~isempty(BinCNameID)
                j=1;
                for i=1:length(BinCNameID)
                    if ~isempty(BinCNameID{i})
                        nn(j)=BinCNameID(i);j=j+1;
                    end
                end
                obj.BinCurveNameID=unique(nn);
                obj.BinCurveCount=length(obj.BinCurveNameID);
            end
            obj.BinControlRulesCount=length(obj.BinControlsInfo);
            obj.BinUnits=getBinUnits(obj);
            % US Customary - SI metric
            if find(strcmp(obj.BinLinkFlowUnits, obj.TYPEUNITS))<6
                obj.BinUnits_US_Customary=1;
            else
                obj.BinUnits_SI_Metric=1;
            end
        end
        function [Errcode]=setBinNodeInitialQuality(obj,varargin)
            parameter=varargin{1};
            zz=obj.BinNodeCount-obj.BinCountInitialQualitylines+1;
            sections={'[QUALITY]','[SOURCES]'};
            [Errcode]=setBinParam2(obj,parameter,sections,zz);   
        end
        function [Errcode]=setBinLinkReactionCoeff(obj,varargin)
            wall=[];Errcode=0;
            bulk=[];
            for i=1:(nargin/2)
                argument =lower(varargin{2*(i-1)+1});
                switch argument
                    case 'wall' 
                        wall=varargin{2*i};
                    case 'bulk' 
                        bulk=varargin{2*i};
                    otherwise
                        warning('Invalid property found.');Errcode=-1;
                        return;
                end
            end   
           links=obj.getBinLinkNameID;
           BinLinkCount=length(links.BinLinkNameID);
           [tlines]=regexp( fileread(obj.BinTempfile), '\n', 'split');
           fid = writenewTemp(obj.BinTempfile);start=0;
           for i=1:length(tlines)
               tt=regexp(tlines{i}, '\s*', 'split');
               tok = strtok(tlines{i});m=1;
               % Skip blank Clines and comments
               if isempty(tok), continue;
               elseif isempty(tt{m})
                   m=m+1;
               end
               if strcmpi(tt{m},'GLOBAL') && strcmpi(tt{m+1},'WALL')
                   start=i;
               end
               if strcmp(tt{m},'[MIXING]')
                   stop1=i; 
               end
               if strcmp(tt{m},'[ENERGY]')
                   stop2=i; 
               end
           end
           stop=max([stop1 stop2]);
           for kk=start+1:stop-1
              tlines{kk}=''; 
           end
           for u=1:start
               nnlines{u}=tlines{u};
           end
           for u=start+1:start+1+BinLinkCount*2
               nnlines{u}=[];
           end
           for k=start+1:length(tlines)
               nnlines{u}=tlines{k};
               u=u+1;
           end
           tlines=nnlines;clear nnlines;
           for i=start:stop
               % Get first token in the line
               tok = strtok(tlines{i});
               if isempty(tok), continue; end
               if strcmp(tok(1),';')
               else
                   if ~isempty(wall) 
                       for e=1:BinLinkCount
                           clear atlines;
                           atlines{1} = 'WALL';  
                           atlines{2} = links.BinLinkNameID{e};  
                           atlines{3} = num2str(wall(e));  
                           newlines=[];
                           for pp=1:length(atlines)
                               newlines = [newlines, atlines{pp},blanks(12)];
                           end
                           tlines{i+e}=newlines;
                       end
                   end
                   if ~isempty(bulk)
                       for e=1:obj.BinLinkCount
                           clear atlines;
                           atlines{1} = 'BULK';  
                           atlines{2} = links.BinLinkNameID{e};  
                           atlines{3} = num2str(bulk(e));  
                           newlines=[];
                           for pp=1:length(atlines)
                               newlines = [newlines, atlines{pp},blanks(12)];
                           end
                           tlines{i+BinLinkCount+e}=newlines;
                       end
                   end
               end
               break;
           end
           fprintf(fid, '%s\n', tlines{:});
           fclose(fid);
           if obj.Bin==1
               Errcode=closeOpenNetwork(obj);
           end
        end
        function [Errcode]=setBinQualType(obj, chemname, chemunits, varargin)
            sections={'[OPTIONS]','[REPORT]'};
            indexParameter=1;
            if nargin<3
                chemunits='mg/L';
            end
            parameter=['Quality',blanks(5),chemname,blanks(5),chemunits];
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);          
        end
        function [Errcode]=setBinQualityChem(obj,varargin)
            sections={'[OPTIONS]','[REPORT]'};
            indexParameter=1;
            parameter='Quality            	chem   mg/L';
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);          
        end
        function [Errcode]=setBinQualityNone(obj,varargin)
            sections={'[OPTIONS]','[COORDINATES]'};
            indexParameter=1;
            parameter='Quality            	None';
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);          
        end
        function [Errcode]=setBinQualityAge(obj,varargin)
            sections={'[OPTIONS]','[COORDINATES]'};
            indexParameter=1;
            parameter='Quality            	Age';
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);          
        end
        function [Errcode]=setBinQualityTrace(obj,varargin)
            sections={'[OPTIONS]','[COORDINATES]'};
            indexParameter=1; 
            if ~sum(strcmp(varargin{1},obj.BinNodeNameID))
                warning('Invalid property found.');
                return
            end
            parameter=['Quality            	Trace ',varargin{1}];
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);          
        end
        function [Errcode]=setBinTimeSimulationDuration(obj,varargin)
            parameter=varargin{1};
            sections={'[TIMES]','[REPORT]'};
            indexParameter=1;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinTimeHydraulicStep(obj,varargin)
            parameter=varargin{1};
            sections={'[TIMES]','[REPORT]'};
            indexParameter=2;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinTimeQualityStep(obj,varargin)
            parameter=varargin{1};
            sections={'[TIMES]','[REPORT]'};
            indexParameter=3;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinTimePatternStep(obj,varargin)
            parameter=varargin{1};
            sections={'[TIMES]','[REPORT]'};
            indexParameter=4;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinTimePatternStart(obj,varargin)
            parameter=varargin{1};
            sections={'[TIMES]','[REPORT]'};
            indexParameter=5;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinTimeReportingStep(obj,varargin)
            parameter=varargin{1};
            sections={'[TIMES]','[REPORT]'};
            indexParameter=6;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinTimeReportingStart(obj,varargin)
            parameter=varargin{1};
            sections={'[TIMES]','[REPORT]'};
            indexParameter=7;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinTimeStatisticsNone(obj,varargin)
            sections={'[TIMES]','[REPORT]'};
            indexParameter=8;
            parameter='None';
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinTimeStatisticsAverage(obj,varargin)
            sections={'[TIMES]','[REPORT]'};
            indexParameter=8;
            parameter='AVERAGE';
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinTimeStatisticsMinimum(obj,varargin)
            sections={'[TIMES]','[REPORT]'};
            indexParameter=8;
            parameter='MINIMUM';
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinTimeStatisticsMaximum(obj,varargin)
            sections={'[TIMES]','[REPORT]'};
            indexParameter=8;
            parameter='MAXIMUM';
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinTimeStatisticsRange(obj,varargin)
            sections={'[TIMES]','[REPORT]'};
            indexParameter=8;
            parameter='RANGE';
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinNodeTankElevation(obj,varargin)
            parameter=varargin{1};
            sections={'[TANKS]','[PIPES]'};
            indexParameter=2;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinNodeTankInitialLevel(obj,varargin)
            parameter=varargin{1};
            sections={'[TANKS]','[PIPES]'};
            indexParameter=3;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinNodeTankMinimumWaterLevel(obj,varargin)
            parameter=varargin{1};
            sections={'[TANKS]','[PIPES]'};
            indexParameter=4;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinNodeTankMaximumWaterLevel(obj,varargin)
            parameter=varargin{1};
            sections={'[TANKS]','[PIPES]'};
            indexParameter=5;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinNodeTankDiameter(obj,varargin)
            parameter=varargin{1};
            sections={'[TANKS]','[PIPES]'};
            indexParameter=6;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinNodeTankMinimumWaterVolume(obj,varargin)
            parameter=varargin{1};
            sections={'[TANKS]','[PIPES]'};
            indexParameter=7;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [value] = getBinLimitingPotential(obj)
            [~,value] = limitingPotential(obj,'get');
        end
        function [Errcode]=setBinLimitingPotential(obj,newlimiting)
            Errcode = limitingPotential(obj,'', newlimiting);
        end
        function [Errcode]=setBinLinkGlobalWallReactionCoeff(obj,varargin)
            parameter=varargin{1};
            sections={'[REACTIONS]','[MIXING]'};
            [Errcode]=setBinParam(obj,3,parameter,sections);        
        end
        function [Errcode]=setBinLinkGlobalBulkReactionCoeff(obj,varargin)
            parameter=varargin{1};
            sections={'[REACTIONS]','[MIXING]'};
            [Errcode]=setBinParam(obj,1,parameter,sections);        
        end
        function BinClose(obj)
            fclose all;
            if exist([obj.BinTempfile(1:end-4),'.bin'])==2
                delete([obj.BinTempfile(1:end-4),'.bin'])
            end
            if ~libisloaded(obj.LibEPANET)
                delete(obj.BinTempfile);
            end
            if exist([obj.BinTempfile(1:end-4),'.msx'])==2
                delete([obj.BinTempfile(1:end-4),'.msx'])
            end
        end
        function [Errcode]=setBinLinkValvesParameters(obj,varargin)
            % Initiality
            Diameter=[];
            Type={};	
            Setting=[];
            MinorLoss=[];   
            Status={};
            for i=1:(nargin/2)
                argument =lower(varargin{2*(i-1)+1});
                switch argument
                    case 'diameter' 
                        Diameter=varargin{2*i};
                    case 'type' 
                        Type=varargin{2*i};
                        for u=1:length(Type)
                            aa(u)=sum(strcmp(Type{u},obj.TYPELINK));
                        end
                        if ~sum(aa)
                            warning('Invalid property found.');Errcode=-1;
                            return;
                        end
                    case 'setting' 
                        Setting=varargin{2*i};
                    case 'minorloss' 
                        MinorLoss=varargin{2*i};
                    case 'status'  
                        if sum(strcmpi(varargin{2*i},'closed')+strcmpi(varargin{2*i},'open')+strcmpi(varargin{2*i},'none')+strcmpi(varargin{2*i},'nonestatus'))==obj.LinkValveCount
                            Status=varargin{2*i};
                        else
                            warning('Invalid argument found.');Errcode=-1;
                            return;
                        end   
                        zz=abs(obj.BinLinkPumpCount+obj.BinLinkValveCount-obj.BinCountStatuslines);
                        sections={'[STATUS]','[PATTERNS]','valve'};
                        setBinParam2(obj,Status,sections,zz);   
                    otherwise
                        warning('Invalid property found.');Errcode=-1;
                        return;
                end
            end            
            [tlines]=regexp( fileread(obj.BinTempfile), '\n', 'split');
            fid = writenewTemp(obj.BinTempfile);
            for i=1:length(tlines)
                tt=regexp(tlines{i}, '\s*', 'split');
                if strcmp(tt{1},'[VALVES]')
                    start=i;
                end
                if strcmp(tt{1},'[DEMANDS]')
                    stop=i;
                end
            end
           if ~isempty(Status)
               for kk=start+1:stop-1
                  tlines{kk}=''; 
               end
               for u=1:start
                   nnlines{u}=tlines{u};
               end
               for u=start+1:start+1+zz
                   nnlines{u}=[];
               end
               for k=start+1:length(tlines)
                   nnlines{u}=tlines{k};
                   u=u+1;
               end
           end
            ll=1;clear atlines;
            if start
               for i=start:stop
                   % Get first token in the line
                   tok = strtok(tlines{i});
                   if isempty(tok), tok='1'; end 
                   if strcmp(tok(1),';')
                   elseif sum(tlines{i}=='[')
                   elseif isempty(tok)
                   % skip
                   else
                       clear atlines;

                       if ll<obj.BinLinkValveCount+1
                           atlines{1}=obj.BinLinkNameID{obj.BinLinkValveIndex(ll)};
                           atlines{2}=obj.BinLinkFromNode{obj.BinLinkValveIndex(ll)};
                           atlines{3}=obj.BinLinkToNode{obj.BinLinkValveIndex(ll)};
                           if ~isempty(Diameter)%Diameters
                               atlines{4} = num2str(Diameter(ll));  
                               newlines=[];
                               for pp=1:length(atlines)
                                   newlines = [newlines, atlines{pp},blanks(10)];
                               end
                               tlines{i}=newlines;
                           end
                           if ~isempty(Type)%Type
                               atlines{5} = num2str(Type{ll});  
                               newlines=[];
                               for pp=1:length(atlines)
                                   newlines = [newlines, atlines{pp},blanks(10)];
                               end
                               tlines{i}=newlines;
                           end
                           if ~isempty(Setting)%Setting
                               atlines{6} = num2str(Setting(ll));  
                               newlines=[];
                               for pp=1:length(atlines)
                                   newlines = [newlines, atlines{pp},blanks(10)];
                               end
                               tlines{i}=newlines;
                           end
                           if ~isempty(MinorLoss)%MinorLoss
                               atlines{7} = num2str(MinorLoss(ll));  
                               newlines=[];
                               for pp=1:length(atlines)
                                   newlines = [newlines, atlines{pp},blanks(10)];
                               end
                               tlines{i}=newlines;
                           end
                       end
                       ll=ll+1;
                   end
               end
            end
            fprintf(fid, '%s\n', tlines{:});
            fclose(fid);
            if obj.Bin==1
                Errcode=closeOpenNetwork(obj);
            end      
        end
        function [Errcode]=setBinNodeResDemandPatternNameID(obj,varargin)
            parameter=varargin{1};
            sections={'[RESERVOIRS]','[TANKS]'};
            indexParameter=3;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinNodeReservoirElevation(obj,varargin)
            parameter=varargin{1};
            sections={'[RESERVOIRS]','[TANKS]'};
            indexParameter=2;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);        
        end
        function [Errcode]=setBinNodeJunctionElevation(obj,varargin)
            parameter=varargin{1};
            sections={'[JUNCTIONS]','[RESERVOIRS]','[DEMANDS]','[STATUS]','[EMITTERS]'};
            indexParameter=2;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections); 
        end
        function [Errcode]=setBinNodeJunctionsBaseDemands(obj,varargin)
            parameter=varargin{1};
            sections={'[JUNCTIONS]','[RESERVOIRS]','[DEMANDS]','[STATUS]','[EMITTERS]'};
            indexParameter=3;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections); 
        end
        function [Errcode]=setBinNodeJunDemandPatternNameID(obj,varargin)
            parameter=varargin{1};
            sections={'[JUNCTIONS]','[RESERVOIRS]','[DEMANDS]','[STATUS]','[EMITTERS]'};
            indexParameter=4;
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections); 
        end
        function [Errcode]=setBinPattern(obj,varargin)
            idpattern=varargin{1};
            %ind=obj.getPatternIndex(idpattern);
            values=varargin{2}; %obj.getPatternValue{ind};
            sections={'[PATTERNS]','[CURVES]'};
            v=obj.getBinPatternsInfo;
            patterns=v.BinPatternNameID;
            if sum(strcmp(idpattern,patterns))
                Errcode=setBinParam(obj,idpattern,values,sections);
            else
                warning('Invalid argument found.');Errcode=-1;
                return
            end
        end
        function [Errcode]=addBinPattern(obj,varargin)
            newidpattern=varargin{1};
            values=varargin{2};
            sections={'[PATTERNS]','[CURVES]'};
            v=obj.getBinPatternsInfo;
            patterns=v.BinPatternNameID;zz=0;
            if ~sum(strcmp(newidpattern,patterns))
                for i=1:length(patterns)
                    if mod(length(v.BinPatternValue{i}),6)==0
                        zz=zz+length(v.BinPatternValue{i})/6;
                    else
                        zz=zz+1;
                        if mod(length(values),6)
                            zz=zz+1;
                        end
                    end
                end
                Errcode=setBinParam2(obj,values,sections,zz,newidpattern);
            else
                warning('Invalid argument found.');Errcode=-1;
                return;
            end
        end
        function [Errcode]=setBinNodeSourceQuality(obj,varargin)
            sections={'[SOURCES]','[MIXING]'};
            values=varargin{1};
            [Errcode]=setBinParam(obj,11,values,sections);
        end
        function saveBinInpFile(obj, varargin)
            if ~isempty(varargin)
                copyfile(obj.BinTempfile,varargin{1}); return;
            end
            [tlines]=regexp( fileread([obj.BinTempfile]), '\n', 'split');
            f = writenewTemp(obj.BinTempfile);
            % /*Write [TITLE] section */
               for i=1:length(tlines)
                   tok = strtok(tlines{i});
                   if sum(tlines{i}=='[') && ~strcmp(tok,'[TITLE]')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
               end
            % % /*Write [JUNCTIONS] section */
               fprintf(f,'\n[JUNCTIONS]');
               sps=blanks(10);
               for u=obj.BinNodeJunctionIndex
                   fprintf(f,'\n%s%s%f',obj.BinNodeNameID{u},sps,obj.BinNodeElevations(u));
               end
            % % /*Write [RESERVOIRS] section */
               fprintf(f,'\n[RESERVOIRS]');
               for u=obj.BinNodeReservoirIndex
                   fprintf(f,'\n%s%s%f',obj.BinNodeNameID{u},sps,obj.BinNodeElevations(u));
               end
            % % /*Write [TANKS] section */
               fprintf(f,'\n[TANKS]');b=1;
               for u=obj.BinNodeTankIndex
%                    InitLevel   	MinLevel    	MaxLevel    	Diameter    	MinVol      	VolCurve
                   fprintf(f,'\n%s%s%f%s%f%s%f%s%f%s%f%s%f',obj.BinNodeNameID{u},sps,obj.BinNodeElevations(u),sps,obj.BinNodeTankInitialLevel(b),sps,obj.BinNodeTankMinimumWaterLevel(b),...
                       sps,obj.BinNodeTankMaximumWaterLevel(b),sps,obj.BinNodeTankDiameter(b),sps,obj.BinNodeTankMinimumWaterVolume(b));
                   b=b+1;
               end
            % % /*Write [PIPES] section */
               fprintf(f,'\n[PIPES]');
               for u=obj.BinLinkPipeIndex
%                   ;ID              	Node1           	Node2           	Length      	Diameter    	Roughness   	MinorLoss   	Status
                   fprintf(f,'\n%s%s%s%s%s%s%f%s%f%s%f%s%f%s%s',obj.BinLinkNameID{u},sps,obj.BinLinkFromNode{u},sps,obj.BinLinkToNode{u},sps,obj.BinLinkLengths(u),sps,obj.BinLinkDiameters(u),...
                       sps,obj.BinLinkPipeRoughness(u),sps,obj.BinLinkPipeMinorLoss(u),sps,obj.BinLinkInitialStatus{u});
               end
            % % /*Write [PUMPS] section */
               fprintf(f,'\n[PUMPS]');
               par={';ID',';Node',';Junction',';Demand',';Type',';Tank',';Link'};
               for pp=1:length(par)
                   if find(strcmp(strtok(tlines),par{pp}))
                       for i=find(strcmp(strtok(tlines),par{pp}))
                          tlines{i}='';
                       end
                   end
               end
               for i=find(strcmp(strtok(tlines),'[PUMPS]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
               end
            % % /*Write [VALVES] section */
               fprintf(f,'\n[VALVES]');
               for i=find(strcmp(strtok(tlines),'[VALVES]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
               end
            % % /*Write [DEMANDS] section */
               fprintf(f,'\n[DEMANDS]');
               for u=1:obj.BinNodeJunctionCount
                   if isempty(obj.BinNodeJunDemandPatternNameID{u})
                       fprintf(f,'\n%s%s%f%s%s',obj.BinNodeNameID{u},sps,obj.BinNodeBaseDemands(u),sps,obj.BinPatternNameID{1});
                   else
                       fprintf(f,'\n%s%s%f%s%s',obj.BinNodeNameID{u},sps,obj.BinNodeBaseDemands(u),sps,obj.BinNodeJunDemandPatternNameID{u});
                   end
               end
               % % /*Write [EMITTERS] section */
               fprintf(f,'\n[EMITTERS]');
               for i=find(strcmp(strtok(tlines),'[EMITTERS]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
                end
            % % /*Write [STATUS] section */
                fprintf(f,'\n[STATUS]');
                for i=find(strcmp(strtok(tlines),'[STATUS]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
                end
            % % /*Write [PATTERNS] section */
                fprintf(f,'\n[PATTERNS]');
                for i=find(strcmp(strtok(tlines),'[PATTERNS]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
                end
            % % /*Write [CURVES] section */
                fprintf(f,'\n[CURVES]');
                for i=find(strcmp(strtok(tlines),'[CURVES]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
                end
            % % /*Write [CONTROLS] section */
                fprintf(f,'\n[CONTROLS]');
                for i=find(strcmp(strtok(tlines),'[CONTROLS]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                      break;
                   end
                   fprintf(f,'\n%s',tlines{i});
                end
            % % /*Write [QUALITY] section */
                fprintf(f,'\n[QUALITY]');
                for i=find(strcmp(strtok(tlines),'[QUALITY]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
                end
            % % /*Write [SOURCES] section */
               fprintf(f,'\n[SOURCES]');
               for i=find(strcmp(strtok(tlines),'[SOURCES]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
               end
            % % /*Write [MIXING] section */
               fprintf(f,'\n[MIXING]');
               for i=find(strcmp(strtok(tlines),'[MIXING]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   for u=1:obj.BinNodeTankCount
                       if isempty(obj.BinNodeTankMixModel)
                           obj.BinNodeTankMixModel{u}='MIXED';
                           obj.BinNodeTankMinimumFraction(u)=0;
                           obj.BinNodeTankMixID{u}=obj.BinNodeTankNameID{u};
                           fprintf(f,'\n%s%s%s%s%f',obj.BinNodeTankNameID{u},sps,obj.BinNodeTankMixModel{u},sps,obj.BinNodeTankMinimumFraction);
                       end
                   end
                   fprintf(f,'\n%s',tlines{i});
               end
            % % /*Write [REACTIONS] section */
               fprintf(f,'\n[REACTIONS]');
               ff=find(strcmp(strtok(tlines),'[REACTIONS]'));
               for u=1:length(ff)
                   for i=ff(u)+1:length(tlines)
                       if sum(tlines{i}=='[')
                           break;
                       end
                       fprintf(f,'\n%s',tlines{i});
                   end
               end
            % % /*Write [ENERGY] section */
               fprintf(f,'\n[ENERGY]');
               for i=find(strcmp(strtok(tlines),'[ENERGY]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
               end
            % % /*Write [TIMES] section */
               fprintf(f,'\n[TIMES]');
               for i=find(strcmp(strtok(tlines),'[TIMES]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
               end
            % % /*Write [OPTIONS] section */
            fprintf(f,'\n[OPTIONS]');
               for i=find(strcmp(strtok(tlines),'[OPTIONS]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
               end
            % % /*Write [REPORT] section */
            fprintf(f,'\n[REPORT]');
               for i=find(strcmp(strtok(tlines),'[REPORT]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
               end
            % % /*Write [TAGS] section */
            fprintf(f,'\n[TAGS]');
               for i=find(strcmp(strtok(tlines),'[TAGS]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
               end
            % % /*Write [RULES] section */
            fprintf(f,'\n[RULES]');
               for i=find(strcmp(strtok(tlines),'[RULES]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
               end         
            % % /*Write [COORDINATES] section */
            fprintf(f,'\n[COORDINATES]');
               for i=find(strcmp(strtok(tlines),'[COORDINATES]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
               end     
            % % /*Write [VERTICES] section */
            fprintf(f,'\n[VERTICES]');
               for i=find(strcmp(strtok(tlines),'[VERTICES]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
               end
            % % /*Write [LABELS] section */
            fprintf(f,'\n[LABELS]');
               for i=find(strcmp(strtok(tlines),'[LABELS]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
               end    
            % % /*Write [BACKDROP] section */
            fprintf(f,'\n[BACKDROP]');
               for i=find(strcmp(strtok(tlines),'[BACKDROP]'))+1:length(tlines)
                   if sum(tlines{i}=='[')
                       break;
                   end
                   fprintf(f,'\n%s',tlines{i});
               end     
               fprintf(f, '\n[END]');
        end
        function [Errcode]=addBinJunction(obj,varargin)
            newID=varargin{1};
            X=varargin{2};
            Y=varargin{3};
            newElevation=varargin{4}; 
            newBaseDemand=varargin{5};
            newDemandPattern=varargin{6};
            toNode=varargin{8}; 
            fromNode=varargin{1};
            typecode = getTypeLink(varargin{end});                 
            Errcode=addLinkWarnings(obj,typecode,varargin{7},toNode); 
            if Errcode==-1, return; end
            [Errcode]=addNode(obj,0,newID,X,Y,newElevation,newBaseDemand,newDemandPattern);
            if Errcode~=200 && obj.Bin==1
                return;
            end
            if sum(typecode==[0,1])
                newPipeID=varargin{7}; 
                newLength=varargin{9};
                newDiameter=varargin{10};
                newRoughness=varargin{11};
                if typecode
                    [Errcode]=addBinPipe(obj,newPipeID,fromNode,toNode,newLength,newDiameter,newRoughness);
                else
                    [Errcode]=addBinCVPipe(obj,newPipeID,fromNode,toNode,newLength,newDiameter,newRoughness);
                end
            elseif typecode==2
                newPumpID=varargin{7}; 
                newCurveIDofPump=varargin{9}; 
                newCurveXvalue=varargin{10}; 
                newCurveYvalue=varargin{11}; 
                newCurveType=varargin{12};  % PUMP, EFFICIENCY, VOLUME, HEADLOSS  
                [Errcode]=addBinPump(obj,newPumpID,fromNode,toNode,newCurveIDofPump,newCurveXvalue,newCurveYvalue,newCurveType);
            else 
                newValveID=varargin{7}; 
                newValveDiameter=varargin{9}; 
                newValveSetting=varargin{10}; 
                [Errcode]=addLink(obj,typecode,newValveID,fromNode,toNode,newValveDiameter,newValveSetting);
            end
        end
        function [Errcode]=addBinReservoir(obj,varargin)
            newID=varargin{1};
            X=varargin{2};
            Y=varargin{3};
            newElevation=varargin{4}; 
            fromNode=varargin{1};
            toNode=varargin{6};
            typecode = getTypeLink(varargin{end});
            Errcode=addLinkWarnings(obj,typecode,varargin{5},toNode); 
            if Errcode==-1, return; end            
            [Errcode]=addNode(obj,1,newID,X,Y,newElevation);
            if Errcode, return; end
            if sum(typecode==[0,1])
                newPipeID=varargin{5}; 
                newLength=varargin{7};
                newDiameter=varargin{8};
                newRoughness=varargin{9};
                if typecode
                    [Errcode]=addBinPipe(obj,newPipeID,fromNode,toNode,newLength,newDiameter,newRoughness);
                else
                    [Errcode]=addBinCVPipe(obj,newPipeID,fromNode,toNode,newLength,newDiameter,newRoughness);
                end            
            elseif typecode==2
                newPumpID=varargin{5}; 
                newCurveIDofPump=varargin{7}; 
                newCurveXvalue=varargin{8}; 
                newCurveYvalue=varargin{9}; 
                newCurveType=varargin{10};  % PUMP, EFFICIENCY, VOLUME, HEADLOSS  
                [Errcode]=addBinPump(obj,newPumpID,fromNode,toNode,newCurveIDofPump,newCurveXvalue,newCurveYvalue,newCurveType);
            else 
                newValveID=varargin{5}; 
                newValveDiameter=varargin{7}; 
                newValveSetting=varargin{8}; 
                [Errcode]=addLink(obj,typecode,newValveID,fromNode,toNode,newValveDiameter,newValveSetting);
            end
        end
        function [Errcode]=addBinTank(obj,varargin)
            newID=varargin{1};
            X=varargin{2};
            Y=varargin{3};
            MaxLevel=varargin{4};
            Diameter=varargin{5};
            Initlevel=varargin{6};
            newElevation=varargin{7};
            initqual=varargin{8};
            MinLevel=varargin{9};
            MinVol=varargin{10};
            fromNode=varargin{1};
            toNode=varargin{12};
            typecode = getTypeLink(varargin{end});
            Errcode=addLinkWarnings(obj,typecode,varargin{11},toNode); 
            if Errcode==-1, return; end            
            [Errcode]=addNode(obj,2,newID,X,Y,MaxLevel,Diameter,Initlevel,newElevation,initqual,MinLevel,MinVol);
            if Errcode
                return;
            end
            if sum(typecode==[0,1])
                newPipeID=varargin{11}; 
                newLength=varargin{13};
                newDiameter=varargin{14};
                newRoughness=varargin{15};
                if typecode
                    [Errcode]=addBinPipe(obj,newPipeID,fromNode,toNode,newLength,newDiameter,newRoughness);
                else
                    [Errcode]=addBinCVPipe(obj,newPipeID,fromNode,toNode,newLength,newDiameter,newRoughness);
                end
            elseif typecode==2
                newPumpID=varargin{11}; 
                newCurveIDofPump=varargin{13}; 
                newCurveXvalue=varargin{14}; 
                newCurveYvalue=varargin{15}; 
                newCurveType=varargin{16};  % PUMP, EFFICIENCY, VOLUME, HEADLOSS  
                [Errcode]=addBinPump(obj,newPumpID,fromNode,toNode,newCurveIDofPump,newCurveXvalue,newCurveYvalue,newCurveType);
            else 
                newValveID=varargin{11}; 
                newValveDiameter=varargin{13}; 
                newValveSetting=varargin{14}; 
                [Errcode]=addLink(obj,typecode,newValveID,fromNode,toNode,newValveDiameter,newValveSetting);
            end
        end
        function [Errcode]=addBinCVPipe(obj,newLink,fromNode,toNode,newLength,newDiameter,newRoughness)
            [Errcode]=addLink(obj,0,newLink,fromNode,toNode,newLength,newDiameter,newRoughness);
        end
        function [Errcode]=addBinPipe(obj,newLink,fromNode,toNode,newLength,newDiameter,newRoughness)
            [Errcode]=addLink(obj,1,newLink,fromNode,toNode,newLength,newDiameter,newRoughness);
        end
        function [Errcode]=addBinPump(obj,newPumpID,fromNode,toNode,varargin)
            Errcode=-1;
            if length(varargin)==4
                newCurveIDofPump=varargin{1};
                newCurveXvalue=varargin{2};
                newCurveYvalue=varargin{3};
                newCurveType=varargin{4};
                if strcmpi(newCurveType,'PUMP')
                    addBinCurvePump(obj,newCurveIDofPump,newCurveXvalue,newCurveYvalue);%Flow-Head
                elseif strcmpi(newCurveType,'EFFICIENCY')
                    addBinCurveEfficiency(obj,newCurveIDofPump,newCurveXvalue,newCurveYvalue);%Flow-Efficiency
                elseif strcmpi(newCurveType,'VOLUME')
                    addBinCurveVolume(obj,newCurveIDofPump,newCurveXvalue,newCurveYvalue);%Heigh-Volume
                elseif strcmpi(newCurveType,'HEADLOSS')
                    addBinCurveHeadloss(obj,newCurveIDofPump,newCurveXvalue,newCurveYvalue);%Flow-Headloss
                end
                [Errcode]=addLink(obj,2,newPumpID,fromNode,toNode,newCurveIDofPump,newCurveXvalue,newCurveYvalue,newCurveType);
            elseif length(varargin)==1
                power=varargin{1};
                [Errcode]=addLink(obj,2,newPumpID,fromNode,toNode,power);
            end
        end
        function [Errcode]=addBinValvePRV(obj,newLink,fromNode,toNode,diameter,setting)
            [Errcode]=addLink(obj,3,newLink,fromNode,toNode,diameter,setting); % Pressure Reducing Valve
        end
        function [Errcode]=addBinValvePSV(obj,newLink,fromNode,toNode,diameter,setting)
            [Errcode]=addLink(obj,4,newLink,fromNode,toNode,diameter,setting); % Pressure Sustaining Valve
        end
        function [Errcode]=addBinValvePBV(obj,newLink,fromNode,toNode,diameter,setting)
            [Errcode]=addLink(obj,5,newLink,fromNode,toNode,diameter,setting); % Pressure Breaker Valve
        end
        function [Errcode]=addBinValveFCV(obj,newLink,fromNode,toNode,diameter,setting)
            [Errcode]=addLink(obj,6,newLink,fromNode,toNode,diameter,setting); % Flow Control Valve
        end
        function [Errcode]=addBinValveTCV(obj,newLink,fromNode,toNode,diameter,setting)
            [Errcode]=addLink(obj,7,newLink,fromNode,toNode,diameter,setting); % Throttle Control Valve
        end
        function [Errcode]=addBinValveGPV(obj,newLink,fromNode,toNode,diameter,setting)
            [Errcode]=addLink(obj,8,newLink,fromNode,toNode,diameter,setting); % General Purpose Valve
        end
        function [Errcode]=addBinCurvePump(obj,newCurveID,varargin)
            CurveX=varargin{1};
            CurveY=varargin{2};
            [Errcode]=addCurve(obj,newCurveID,CurveX,CurveY,0);  %ID Flow-OptionsHeadloss
        end
        function [Errcode]=addBinCurveEfficiency(obj,newCurveID,CurveX,CurveY)
            [Errcode]=addCurve(obj,newCurveID,CurveX,CurveY,1);  %ID Flow-Efficiency
        end
        function [Errcode]=addBinCurveVolume(obj,newCurveID,CurveX,CurveY)
            [Errcode]=addCurve(obj,newCurveID,CurveX,CurveY,2);  %ID Heigh-Volume
        end
        function [Errcode]=addBinCurveHeadloss(obj,newCurveID,CurveX,CurveY)
            [Errcode]=addCurve(obj,newCurveID,CurveX,CurveY,3);  %ID Flow-OptionsHeadloss
        end
        function [Errcode]=addBinControl(obj,x,status,y_t_c,param,z,varargin)
            if nargin==6
                [Errcode]=addNewControl(obj,x,status,y_t_c,param,z);
            elseif nargin==5
                [Errcode]=addNewControl(obj,x,status,y_t_c,param);
            elseif nargin==4
                [Errcode]=addNewControl(obj,x,status,y_t_c);
            else
                [Errcode]=addNewControl(obj,x); % add many controls
            end
        end
        function [Errcode]=removeBinNodeID(obj,NodeID)
            [Errcode]=rmNode(obj,NodeID);
        end
        function [Errcode]=removeBinCurveID(obj,CurveID)
            [Errcode]=rmCurveID(obj,CurveID);
        end
        function [Errcode]=removeBinLinkID(obj,LinkID)
            [Errcode]=rmLink(obj,LinkID);
        end
        function [Errcode]=removeBinControlLinkID(obj,ID)
            [Errcode]=rmControl(obj,1,ID);
        end
        function [Errcode]=removeBinRulesControlLinkID(obj,ID)
            [Errcode]=rmRulesControl(obj,1,ID);
        end
        function [Errcode]=removeBinRulesControlNodeID(obj,ID)
            [Errcode]=rmRulesControl(obj,0,ID);
        end
        function [Errcode]=removeBinControlNodeID(obj,ID)
            [Errcode]=rmControl(obj,0,ID);
        end
        function [Errcode]=setBinFlowUnitsGPM(obj)
            [Errcode]=Options(obj,'GPM'); %gallons per minute
        end
        function [Errcode]=setBinFlowUnitsLPS(obj)
            [Errcode]=Options(obj,'LPS'); %liters per second
        end
        function [Errcode]=setBinFlowUnitsMGD(obj)
            [Errcode]=Options(obj,'MGD'); %million gallons per day
        end
        function [Errcode]=setBinFlowUnitsIMGD(obj)
            [Errcode]=Options(obj,'IMGD'); %Imperial mgd
        end
        function [Errcode]=setBinFlowUnitsCFS(obj)
            [Errcode]=Options(obj,'CFS'); %cubic feet per second
        end
        function [Errcode]=setBinFlowUnitsAFD(obj)
            [Errcode]=Options(obj,'AFD'); %acre-feet per day
        end
        function [Errcode]=setBinFlowUnitsLPM(obj)
            [Errcode]=Options(obj,'LPM'); %liters per minute
        end
        function [Errcode]=setBinFlowUnitsMLD(obj)
            [Errcode]=Options(obj,'MLD'); %million liters per day
        end
        function [Errcode]=setBinFlowUnitsCMH(obj)
            [Errcode]=Options(obj,'CMH'); %cubic meters per hour
        end
        function [Errcode]=setBinFlowUnitsCMD(obj)
            [Errcode]=Options(obj,'CMD'); %cubic meters per day
        end
        function [Errcode]=setBinHeadlossHW(obj)
            [Errcode]=Options(obj,'','H-W');  %Hazen-Wiliams
        end
        function [Errcode]=setBinHeadlossDW(obj)
            [Errcode]=Options(obj,'','D-W');  %Darcy-Weisbach
        end
        function [Errcode]=setBinHeadlossCM(obj)
            [Errcode]=Options(obj,'','C-M');  %Chezy-Manning
        end        
        function [Errcode]=setBinLinkPipeLengths(obj,varargin)
            parameter=varargin{1};
            indexParameter=4;
            sections={'[PIPES]', '[PUMPS]'};
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections);
        end
        function [Errcode]=setBinLinkPipeDiameters(obj,varargin)
            parameter=varargin{1};
            indexParameter=5;
            sections={'[PIPES]', '[PUMPS]'};
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections); 
        end
        function [Errcode]=setBinLinkPipeRoughness(obj,varargin)
            parameter=varargin{1};
            indexParameter=6;
            sections={'[PIPES]', '[PUMPS]'};
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections); 
        end
        function [Errcode]=setBinLinkPipeMinorLoss(obj,varargin)
            parameter=varargin{1};
            indexParameter=7;
            sections={'[PIPES]', '[PUMPS]'};
            [Errcode]=setBinParam(obj,indexParameter,parameter,sections); 
        end
        function [Errcode]=setBinLinkPipeStatus(obj,varargin)
           indexParameter=8;
           if sum(strcmpi(varargin{1},'closed')+strcmpi(varargin{1},'open')+strcmpi(varargin{1},'cv'))==obj.BinLinkPipeCount
                parameter=varargin{1};
            else
                warning('Invalid argument found.');Errcode=-1;
                return;
           end
           sections={'[PIPES]', '[PUMPS]'};
           [Errcode]=setBinParam(obj,indexParameter,parameter,sections); 
        end
        function [Errcode]=setBinLinkPumpStatus(obj,varargin)
            if sum(strcmpi(varargin{1},'closed')+strcmpi(varargin{1},'open'))==obj.BinLinkPumpCount
                parameter=varargin{1};
            else
                warning('Invalid argument found.');Errcode=-1;
                return;
            end   
            zz=abs(obj.BinLinkPumpCount+1+obj.BinLinkValveCount-obj.BinCountStatuslines);
            sections={'[STATUS]','[PATTERNS]','pump'};
            [Errcode]=setBinParam2(obj,parameter,sections,zz);   
        end
        function [Errcode]=setBinLinkPipesParameters(obj,varargin)
            % Initiality
            Lengths=[];Errcode=0;
            Diameters=[];
            Roughness=[];
            Minorloss=[];
            Status={};
            for i=1:(nargin/2)
                argument =lower(varargin{2*(i-1)+1});
                switch argument
                    case 'length' 
                        Lengths=varargin{2*i};
                    case 'diameter' % Highlight Node
                        Diameters=varargin{2*i};
                    case 'roughness' % Highlight Link
                        Roughness=varargin{2*i};
                    case 'minorloss' % font size
                        Minorloss=varargin{2*i};
                    case 'status' % color
                        if sum(strcmpi(varargin{2*i},'closed')+strcmpi(varargin{2*i},'open'))==obj.BinLinkPipeCount
                            Status=varargin{2*i};
                        else
                            warning('Invalid argument found.');Errcode=-1;
                            return;
                        end
                    otherwise
                        warning('Invalid property found.');Errcode=-1;
                        return;
                end
            end            
            [tlines]=regexp( fileread([obj.BinTempfile]), '\n', 'split');
            fid = writenewTemp(obj.BinTempfile);
            for i=1:length(tlines)
                tt=regexp(tlines{i}, '\s*', 'split');
                if strcmp(tt{1},'[PIPES]')
                    pipes=i;
                end
                if strcmp(tt{1},'[PUMPS]')
                    pumps=i;
                end
            end
            ll=1;clear atlines;
           for i=pipes:pumps
               % Get first token in the line
               tok = strtok(tlines{i});
%                if isempty(tok), continue; end
               % Skip blank Clines and comments
               if isempty(tok), continue; end
               if strcmp(tok(1),';')
               elseif sum(tlines{i}=='[')
               % skip
               else
                   clear atlines;
                   atlines = checktlines(tlines{i});

                   if ~isempty(Diameters)%Diameters
                       atlines{5} = num2str(Diameters(ll));  
                       newlines=[];
                       for pp=1:length(atlines)
                           newlines = [newlines, atlines{pp},blanks(10)];
                       end
                       tlines{i}=newlines;
                   end
                   if ~isempty(Lengths)%Lengths
                       atlines{4} = num2str(Lengths(ll));  
                       newlines=[];
                       for pp=1:length(atlines)
                           newlines = [newlines, atlines{pp},blanks(10)];
                       end
                       tlines{i}=newlines;
                   end
                   if ~isempty(Roughness)%Roughness
                       atlines{6} = num2str(Roughness(ll));  
                       newlines=[];
                       for pp=1:length(atlines)
                           newlines = [newlines, atlines{pp},blanks(10)];
                       end
                       tlines{i}=newlines;
                   end
                   if ~isempty(Minorloss)%Minorloss
                       atlines{7} = num2str(Minorloss(ll));  
                       newlines=[];
                       for pp=1:length(atlines)
                           newlines = [newlines, atlines{pp},blanks(10)];
                       end
                       tlines{i}=newlines;
                   end
                   if ~isempty(Status)%Status
                       atlines{8} = Status{ll};  
                       newlines=[];
                       for pp=1:length(atlines)
                           newlines = [newlines, atlines{pp},blanks(10)];
                       end
                       tlines{i}=newlines;
                   end
                   ll=ll+1;
               end
           end
            fprintf(fid, '%s\n', tlines{:});
            fclose(fid);
            if obj.Bin==1
                Errcode=closeOpenNetwork(obj);
            end
        end
        function [Errcode]=setBinNodeJunctionsParameters(obj,varargin)
            % Initiality
            Elevations=[];
            BaseDemands=[];
            patterns=[];
            for i=1:(nargin/2)
                argument =lower(varargin{2*(i-1)+1});
                switch argument
                    case 'elevation' 
                        Elevations=varargin{2*i};
                    case 'basedemand'  
                        BaseDemands=varargin{2*i};
                    case 'demandpattern'  
                        patterns=varargin{2*i};
                    otherwise
                        warning('Invalid property found.');Errcode=-1;
                        return;
                end
            end            
            [tlines]=regexp(fileread([obj.BinTempfile]), '\n', 'split');
            fid = writenewTemp(obj.BinTempfile);
            for i=1:length(tlines)
                tt=regexp(tlines{i}, '\s*', 'split');
                if strcmp(tt{1},'[JUNCTIONS]')
                    junctions=i;
                end
                if strcmp(tt{1},'[RESERVOIRS]')
                    reservoirs=i;
                end
                if strcmp(tt{1},'[DEMANDS]')
                    demands=i;
                end
                if strcmp(tt{1},'[STATUS]')
                    status=i;
                end
            end
            ll=1;
            if junctions
               for i=junctions:reservoirs
                   % Get first token in the line
                   tok = strtok(tlines{i});
                   % Skip blank Clines and comments
                   if isempty(tok), continue; end
                   if strcmp(tok(1),';')
                   elseif sum(tlines{i}=='[')
                   elseif isempty(tok)
                   % skip
                   else
                       clear atlines;
                       atlines = checktlines(tlines{i});

                       if ~isempty(Elevations)%Elevations
                           atlines{2} = num2str(Elevations(ll));  
                           newlines=[];
                           for pp=1:length(atlines)
                               newlines = [newlines, atlines{pp},blanks(10)];
                           end
                           tlines{i}=newlines;
                       end
                       if ~isempty(BaseDemands) && length(atlines)>2
                           if ~isempty(atlines{3}) && ~sum(atlines{3}==';')
                               atlines{3} = num2str(BaseDemands(ll));  
                               newlines=[];
                               for pp=1:length(atlines)
                                   newlines = [newlines, atlines{pp},blanks(10)];
                               end
                               tlines{i}=newlines;
                           end
                       end
                       if ~isempty(patterns) && length(atlines)>3
                           if ~isempty(atlines{3}) && ~sum(atlines{3}==';')
                               atlines{4} = num2str(patterns{ll});  
                               newlines=[];
                               for pp=1:length(atlines)
                                   newlines = [newlines, atlines{pp},blanks(10)];
                               end
                               tlines{i}=newlines;
                           end
                       end
                       ll=ll+1;
                   end
               end
            end
            if demands
                ll=1;
               for i=demands:status
                   % Get first token in the line
                   tok = strtok(tlines{i});
                   % Skip blank Clines and comments
                   if isempty(tok), continue; end
                   if strcmp(tok(1),';')
                   elseif sum(tlines{i}=='[')
                   elseif isempty(tok)
                   % skip
                   else
                       clear atlines;
                       atlines = checktlines(tlines{i});

                       if ~isempty(BaseDemands) && length(atlines)>2%BaseDemands
                           if ~isempty(atlines{3}) && ~sum(atlines{3}==';')
                               atlines{2} = num2str(BaseDemands(ll));  
                               newlines=[];
                               for pp=1:length(atlines)
                                   newlines = [newlines, atlines{pp},blanks(10)];
                               end
                               tlines{i}=newlines;
                           end
                       end
                       if ~isempty(patterns) && length(atlines)>2
                           if ~isempty(atlines{3}) && ~sum(atlines{3}==';')
                               atlines{3} = num2str(patterns{ll});  
                               newlines=[];
                               for pp=1:length(atlines)
                                   newlines = [newlines, atlines{pp},blanks(10)];
                               end
                               tlines{i}=newlines;
                           end
                       end
                       ll=ll+1;
                   end
               end
           end
            fprintf(fid, '%s\n', tlines{:});
            fclose(fid);
            if obj.Bin==1
                Errcode=closeOpenNetwork(obj);
            end
        end
        function [Errcode]=setBinNodeTankParameters(obj,varargin)
            % Initiality
            elevations=[];Errcode=0;
            InitLevel=[];
            MinLevel=[];
            MaxLevel=[];
            Diameter=[];
            MinVol=[];
            MixModel={};
            MixFraction=[];
            for i=1:(nargin/2)
                argument =lower(varargin{2*(i-1)+1});
                switch argument
                    case 'elevation' 
                        elevations=varargin{2*i};
                    case 'initlevel' 
                        InitLevel=varargin{2*i};
                    case 'minlevel' 
                        MinLevel=varargin{2*i};
                    case 'maxlevel' 
                        MaxLevel=varargin{2*i};
                    case 'diameter' 
                        Diameter=varargin{2*i};
                    case 'minvol' 
                        MinVol=varargin{2*i};
                    case 'mixmodel' 
                        MixModel=varargin{2*i};
%                         v=obj.getBinNodesInfo;
                        mixm=upper(MixModel(find(cellfun('isempty',(varargin{2*i}))==0)));
                        for u=1:length(mixm)
                            if ~sum(strcmp(mixm(u),{'MIX1', 'FIFO','LIFO','MIXED','2COMP'}))
                              warning('Invalid argument found.');Errcode=-1;
                              return;
                            end
                        end
                    case 'mixfraction'
                        MixFraction=varargin{2*i};
                    otherwise
                        warning('Invalid property found.');Errcode=-1;
                        return;
                end
            end            
            [tlines]=regexp( fileread([obj.BinTempfile]), '\n', 'split');
            fid = writenewTemp(obj.BinTempfile);
            for i=1:length(tlines)
                tt=regexp(tlines{i}, '\s*', 'split');
                if strcmp(tt{1},'[TANKS]')
                    tanks=i;
                end
                if strcmp(tt{1},'[PIPES]')
                    pipes=i;
                end
                if strcmp(tt{1},'[MIXING]')
                    start1=i;
                end
                if strcmp(tt{1},'[REACTIONS]')
                    stop1=i;
                end
            end
            ll=1;
           for i=tanks:pipes
               % Get first token in the line
               tok = strtok(tlines{i});
               if isempty(tok), continue; end
               % Skip blank Clines and comments
               if strcmp(tok(1),';')
               elseif sum(tlines{i}=='[')
               elseif isempty(tok)
               % skip
               else
                   clear atlines;
                   atlines = checktlines(tlines{i});

                   if ~isempty(elevations)%elevations
                       atlines{2} = num2str(elevations(ll));  
                       newlines=[];
                       for pp=1:length(atlines)
                           newlines = [newlines, atlines{pp},blanks(10)];
                       end
                       tlines{i}=newlines;
                   end
                   if ~isempty(InitLevel) 
                       atlines{3} = num2str(InitLevel(ll)); 
                       newlines=[];
                       for pp=1:length(atlines)
                           newlines = [newlines, atlines{pp},blanks(10)];
                       end
                       tlines{i}=newlines;
                   end
                   if ~isempty(MinLevel) 
                       atlines{4} = num2str(MinLevel(ll)); 
                       newlines=[];
                       for pp=1:length(atlines)
                           newlines = [newlines, atlines{pp},blanks(10)];
                       end
                       tlines{i}=newlines;
                   end
                   if ~isempty(MaxLevel) 
                       atlines{5} = num2str(MaxLevel(ll)); 
                       newlines=[];
                       for pp=1:length(atlines)
                           newlines = [newlines, atlines{pp},blanks(10)];
                       end
                       tlines{i}=newlines;
                   end
                   if ~isempty(Diameter) 
                       atlines{6} = num2str(Diameter(ll)); 
                       newlines=[];
                       for pp=1:length(atlines)
                           newlines = [newlines, atlines{pp},blanks(10)];
                       end
                       tlines{i}=newlines;
                   end
                   if ~isempty(MinVol) 
                       atlines{7} = num2str(MinVol(ll)); 
                       newlines=[];
                       for pp=1:length(atlines)
                           newlines = [newlines, atlines{pp},blanks(10)];
                       end
                       tlines{i}=newlines;
                   end
                   ll=ll+1;
               end
           end
           if ~isempty(MixModel)
               ll=find(cellfun('isempty',(MixModel))==0);
               ll=ll(1);
           else
               ll=1;
           end
          for i=start1+1:stop1-1
               % Get first token in the line
               tok = strtok(tlines{i});
               if isempty(tok), continue; end
               if isempty(tlines{i})
               elseif strcmp(tok(1),';')
               else
                   clear atlines;
                   atlines = checktlines(tlines{i});

                   if ~isempty(MixModel) && ll<=obj.BinNodeTankIndex
                       atlines{2} = num2str(MixModel{ll});  
                       newlines=[];
                       for pp=1:length(atlines)
                           newlines = [newlines, atlines{pp},'              	'];
                       end
                       tlines{i}=newlines;
                   end
                   if ~isempty(MixFraction) && ll<=obj.BinNodeTankIndex
                       atlines{3} = num2str(MixFraction(ll)); 
                       newlines=[];
                       for pp=1:length(atlines)
                           newlines = [newlines, atlines{pp},'              	'];
                       end
                       tlines{i}=newlines;
                   end
                   ll=ll+1;
               end
          end
          fprintf(fid, '%s\n', tlines{:});
          fclose(fid);  
           if obj.Bin==1
               Errcode=closeOpenNetwork(obj);
           end
        end
        function [Errcode]=setBinNodeReservoirParameters(obj,varargin)
            % Initiality
            elevations=[];Errcode=0;
            patterns={};
            for i=1:(nargin/2)
                argument =lower(varargin{2*(i-1)+1});
                switch argument
                    case 'elevation' 
                        elevations=varargin{2*i};
                    case 'pattern' 
                        patterns=varargin{2*i};
                    otherwise
                        warning('Invalid property found.');Errcode=-1;
                        return;
                end
            end            
            [tlines]=regexp( fileread([obj.BinTempfile]), '\n', 'split');
            fid = writenewTemp(obj.BinTempfile);
            for i=1:length(tlines)
                tt=regexp(tlines{i}, '\s*', 'split');
                if strcmp(tt{1},'[RESERVOIRS]')
                    reservoirs=i;
                end
                if strcmp(tt{1},'[TANKS]')
                    tanks=i;
                end
            end
           ll=1;clear atlines;
           for i=reservoirs:tanks
               % Get first token in the line
               tok = strtok(tlines{i});
               % Skip blank Clines and comments
               if isempty(tok), continue; end
               if strcmp(tok(1),';')
               elseif sum(tlines{i}=='[')
               % skip
               else
                   clear atlines;
                   atlines = checktlines(tlines{i});

                   if ~isempty(elevations)%elevations
                       atlines{2} = num2str(elevations(ll));  
                       newlines=[];
                       for pp=1:length(atlines)
                           newlines = [newlines, atlines{pp},blanks(10)];
                       end
                       tlines{i}=newlines;
                   end
                   if ~isempty(patterns) 
                       atlines{3} = num2str(patterns{ll}); 
                       newlines=[];
                       for pp=1:length(atlines)
                           newlines = [newlines, atlines{pp},blanks(10)];
                       end
                       tlines{i}=newlines;
                   end
                   ll=ll+1;
               end
           end
            fprintf(fid, '%s\n', tlines{:});
            fclose(fid); 
            if obj.Bin==1
                Errcode=closeOpenNetwork(obj);
            end
        end
        function [value] = getBinSections(obj)
            % Open epanet input file
            [info]=regexp( fileread(obj.BinTempfile), '\n', 'split'); 
            sect=0;
            value=struct;
            p=zeros(1,24);
            for i=1:length(info)
                tline = info{i};
                if ~ischar(tline),   break,   end
                tok = strtok(tline);
                if isempty(tok), continue, end
                if (tok(1) == '[')
                    if strcmpi(tok(1:5),'[VALV'), sect=24;
                    elseif strcmpi(tok(1:5),'[PIPE'), sect=23;
                    elseif strcmpi(tok(1:5),'[TANK'), sect=22;
                    elseif strcmpi(tok(1:5),'[VERT'), sect=21;
                    elseif strcmpi(tok(1:5),'[RESE'), sect=20;
                    elseif strcmpi(tok(1:5),'[JUNC'), sect=19;
                    elseif strcmpi(tok(1:5),'[PUMP'), sect=17;
                    elseif strcmpi(tok(1:5),'[OPTI'), sect=16;
                    elseif strcmpi(tok(1:5),'[REPO'), sect=15;
                    elseif strcmpi(tok(1:5),'[TIME'), sect=14;
                    elseif strcmpi(tok(1:5),'[REAC'), p(13)=0; sect=13;
                    elseif strcmpi(tok(1:5),'[ENER'), sect=12;
                    elseif strcmpi(tok(1:5),'[DEMA'), sect=11;
                    elseif strcmpi(tok(1:5),'[STAT'), sect=10;
                    elseif strcmpi(tok(1:5),'[EMIT'), sect=9;
                    elseif strcmpi(tok(1:5),'[CONT'), sect=8;
                    elseif strcmpi(tok(1:5),'[PATT'), sect=7;
                    elseif strcmpi(tok(1:5),'[CURV'), sect=6;
                    elseif strcmpi(tok(1:5),'[QUAL'), sect=5;
                    elseif strcmpi(tok(1:5),'[SOUR'), sect=4;
                    elseif strcmpi(tok(1:5),'[MIXI'), sect=3;
                    elseif strcmpi(tok(1:5),'[COOR'), sect=1;
                    elseif strcmpi(tok(1:5),'[RULE'), sect=2;
                    elseif (tok(1) == '['), sect=0; continue;
                    end
                end
                if sect==0, continue;
                elseif sect==1
                    p(1)=p(1)+1;
                    value.Coordinates{p(1)}=tline;
                elseif sect==2
                    p(2)=p(2)+1;
                    value.Rules{p(2)}=tline;
                elseif sect==3
                    p(3)=p(3)+1;
                    value.Mixing{p(3)}=tline;
                elseif sect==4
                    p(4)=p(4)+1;
                    value.Sources{p(4)}=tline;
                elseif sect==5
                    p(5)=p(5)+1;
                    value.Quality{p(5)}=tline;
                elseif sect==6
                    p(6)=p(6)+1;
                    value.Curves{p(6)}=tline;
                elseif sect==7
                    p(7)=p(7)+1;
                    value.Patterns{p(7)}=tline;
                elseif sect==8
                    p(8)=p(8)+1;
                    value.Controls{p(8)}=tline;
                elseif sect==9
                    p(9)=p(9)+1;
                    value.Emitters{p(9)}=tline;
                elseif sect==10
                    p(10)=p(10)+1;
                    value.Status{p(10)}=tline;
                elseif sect==11
                    p(11)=p(11)+1;
                    value.Demands{p(11)}=tline;
                elseif sect==12
                    p(12)=p(12)+1;
                    value.Energy{p(12)}=tline;
                elseif sect==13
                    if (tok(1) == '[')
                        p(18)=p(18)+1;p(13)=p(13)+1;
                        value.OptReactions{p(18)}=tline;
                        value.Reactions{p(13)}=tline; continue;
                    end
                    if sum(strcmpi(tok,{'order','global','limiting','roughness'}))
                        value.OptReactions{p(13)}=tline;p(13)=p(13)+1;
                    elseif sum(strcmpi(tok,{'BULK','WALL','TANK'}))
                        value.Reactions{p(18)}=tline;p(18)=p(18)+1;
                    end
                elseif sect==14
                    p(14)=p(14)+1;
                    value.Times{p(14)}=tline;
                elseif sect==15
                    p(15)=p(15)+1;
                    value.Report{p(15)}=tline;
                elseif sect==16
                    p(16)=p(16)+1;
                    value.Options{p(16)}=tline;
                elseif sect==17
                    p(17)=p(17)+1;
                    value.Pumps{p(17)}=tline;
                elseif sect==19
                    p(19)=p(19)+1;
                    value.Junctions{p(19)}=tline;
                elseif sect==20
                    p(20)=p(20)+1;
                    value.Reservoirs{p(20)}=tline;
                elseif sect==21
                    p(21)=p(21)+1;
                    value.Vertices{p(21)}=tline;
                elseif sect==22
                    p(22)=p(22)+1;
                    value.Tanks{p(22)}=tline;
                elseif sect==23
                    p(23)=p(23)+1;
                    value.Pipes{p(23)}=tline;
                elseif sect==24
                    p(24)=p(24)+1;
                    value.Valves{p(24)}=tline;
                end
            end
        end
        function value = getBinNodeSourceInfo(obj,varargin)
            sections = {'[SOURCES]' '[MIXING]'};
            value = getBinParam(obj,sections);
        end
        function value = getBinPatternsInfo(obj,varargin)
            sections = {'[PATTERNS]' '[CURVES]'};
            value = getBinParam(obj,sections);
        end
        function value = getBinNodeIndex(obj,varargin)
            v=obj.getBinNodeNameID;
            if isempty(varargin)
                value=1:length(v.BinNodeNameID);
            else
                value=find(strcmpi(v.BinNodeNameID,varargin{1}));
            end            
        end
        function value = getBinLinkIndex(obj,varargin)
            v=obj.getBinLinkNameID;
            if isempty(varargin)
                value=1:length(v.BinLinkNameID);
            else
                value=find(strcmpi(v.BinLinkNameID,varargin{1}));
            end
        end
        function value = getBinPatternIndex(obj, varargin)
            v=obj.getBinPatternsInfo;
            value = find(strcmpi(v.BinPatternNameID,varargin{1}));
        end
        function value = getBinCurvesInfo(obj)
            [value.BinCurveNameID,value.BinCurveXvalue,value.BinCurveYvalue,value.BinCurveAllLines,value.BinCurveTypes,value.BinCurveCount,value.BinCTypes]=CurveInfo(obj);
        end
        function [value] = Binplot(obj,varargin)
            %Plots network in a new Matlab figure
            %Arguments:
            % 'nodes': yes/no
            % 'links': yes/no
            % 'line' : yes/no
            % 'point': yes/no
            % 'highlightnode': array of node IDs
            % 'highlightlink': array of link IDs
            % 'fontsize': number (px)
            % 'colornode': array of node IDs
            % 'colorlink': array of link id
            % 'axes': axes coordinates
            % 'linksindex': yes
            % 'nodesindex': yes
            % Example:
            % d.Binplot('nodes','yes','links','yes','highlightnode',{'10','11'},'highlightlink',{'10'},'fontsize',8);
            % d.Binplot('line','no');
            % d.Binplot('point','no','linksindex','yes');
            % d.Binplot('linksindex','yes','fontsize',8);
            % d.Binplot('nodesindex','yes','fontsize',14);
            [value] = ENplot(obj,'bin',1,varargin{:});
        end
        function value = getBinNumberReportingPeriods(obj,varargin)
            value = getBinComputedTimeSeries(obj,27);
        end
        function value = getBinSimulationDuration(obj,varargin)
            value = getBinComputedTimeSeries(obj,28);
        end
        function value = getBinElevationEachNode(obj,varargin)
            value = getBinComputedTimeSeries(obj,1);
        end
        function value = getBinLengthEachLink(obj,varargin)
            value = getBinComputedTimeSeries(obj,2);
        end
        function value = getBinDiameterEachLink(obj,varargin)
            value = getBinComputedTimeSeries(obj,3);
        end
        function value = getBinComputedPumpIndexListLinks(obj,varargin)
            value = getBinComputedTimeSeries(obj,4);
        end
        function value = getBinComputedPumpUtilization(obj,varargin)
            value = getBinComputedTimeSeries(obj,5);
        end
        function value = getBinComputedAverageEfficiency(obj,varargin)
            value = getBinComputedTimeSeries(obj,6);
        end
        function value = getBinComputedAverageKwattsOrMillionGallons(obj,varargin)
            value = getBinComputedTimeSeries(obj,7);
        end
        function value = getBinComputedAverageKwatts(obj,varargin)
            value = getBinComputedTimeSeries(obj,8);
        end
        function value = getBinComputedPeakKwatts(obj,varargin)
            value = getBinComputedTimeSeries(obj,9);
        end
        function value = getBinComputedAverageCostPerDay(obj,varargin)
            value = getBinComputedTimeSeries(obj,10);
        end
        function value = getBinComputedNodeDemand(obj,varargin)
            value = getBinComputedTimeSeries(obj,11);
        end
        function value = getBinComputedNodeHead(obj,varargin)
            value = getBinComputedTimeSeries(obj,12);
        end
        function value = getBinComputedNodePressure(obj,varargin)
            value = getBinComputedTimeSeries(obj,13);
        end
        function value = getBinComputedNodeQuality(obj,varargin)
            value = getBinComputedTimeSeries(obj,14);
        end
        function value = getBinComputedLinkFlow(obj,varargin)
            value = getBinComputedTimeSeries(obj,15);
        end
        function value = getBinComputedLinkVelocity(obj,varargin)
            value = getBinComputedTimeSeries(obj,16);
        end
        function value = getBinComputedLinkHeadloss(obj,varargin)
            value = getBinComputedTimeSeries(obj,17);
        end
        function value = getBinComputedLinkQuality(obj,varargin)
            value = getBinComputedTimeSeries(obj,18);
        end
        function value = getBinComputedLinkStatus(obj,varargin)
            value = getBinComputedTimeSeries(obj,19);
        end
        function value = getBinComputedLinkSetting(obj,varargin)
            value = getBinComputedTimeSeries(obj,20);
        end
        function value = getBinComputedLinkReactionRate(obj,varargin)
            value = getBinComputedTimeSeries(obj,21);
        end
        function value = getBinComputedLinkFrictionFactor(obj,varargin)
            value = getBinComputedTimeSeries(obj,22);
        end
        function value = getBinComputedAverageBulkReactionRate(obj,varargin)
            value = getBinComputedTimeSeries(obj,23);
        end
        function value = getBinComputedAverageWallReactionRate(obj,varargin)
            value = getBinComputedTimeSeries(obj,24);
        end
        function value = getBinComputedAverageTankReactionRate(obj,varargin)
            value = getBinComputedTimeSeries(obj,25);
        end
        function value = getBinComputedAverageSourceInflow(obj,varargin)
            value = getBinComputedTimeSeries(obj,26);
        end
        function value = getBinComputedAllParameters(obj, varargin)
            [fid,binfile,rptfile] = runEPANETexe(obj);
            value = readEpanetBin(fid, binfile, rptfile);
        end
        function [info,tline,allines] = readInpFile(obj,varargin)
            [info,tline,allines] = readAllFile(obj.BinTempfile);
        end
        function value = getBinNodesInfo(obj)
            valueL = obj.getBinLinksInfo;
            % Open epanet input file
            [~,info] = obj.readInpFile;
            sect=0;
            for h=1:length(info)
                tline = info{h};
                if ~ischar(tline),   break,   end
                % Get first token in the line
                tok = strtok(tline);
                % Skip blank Clines and comments
                if isempty(tok), continue, end
                if (tok(1) == ';'), continue, end
                if (tok(1) == '[')
                    % [JUNCTIONS] section
                    if strcmpi(tok(1:5),'[JUNC')
                        sect=1;
                        value.BinNodeJunctionNameID={};
                        value.BinNodeType={};
                        value.BinNodeJunctionIndex=[];
                        value.BinNodeJunctionElevation=[];
                        value.BinNodeJunctionsBaseDemands=[];
                        value.BinNodeJunDemandPatternNameID={};
                        value.BinNodeJunctionsBaseDemandsID={};k=1;
                        continue;
                    elseif strcmpi(tok(1:5),'[RESE')
                        sect=2;r=1;
                        value.BinNodeReservoirNameID={};
                        value.BinNodeReservoirIndex=[];
                        value.BinNodeReservoirElevation=[];
                        value.BinNodeResDemandPatternNameID={};
                        continue;
                        % [TANKS] section
                    elseif strcmpi(tok(1:5),'[TANK')
                        sect=3;p=1;
                        value.BinNodeTankNameID={};
                        value.BinNodeTankIndex=[];
                        value.BinNodeTankElevation=[];
                        value.BinNodeTankInitialLevel=[]; 
                        value.BinNodeTankMinimumWaterLevel=[];  
                        value.BinNodeTankMaximumWaterLevel=[]; 
                        value.BinNodeTankDiameter=[];  
                        value.BinNodeTankMinimumWaterVolume=[];
                        continue;
                    elseif strcmpi(tok(1:5),'[PIPE')
                        value.BinNodeJunctionCount = length(value.BinNodeJunctionNameID); 
                        value.BinNodeReservoirCount = length(value.BinNodeReservoirNameID); 
                        value.BinNodeTankCount = length(value.BinNodeTankNameID);
                        value.BinNodeTankReservoirCount = value.BinNodeReservoirCount + value.BinNodeTankCount;
                        value.BinNodeCount = value.BinNodeJunctionCount+value.BinNodeTankReservoirCount;
                        value.BinNodeNameID=[value.BinNodeJunctionNameID value.BinNodeReservoirNameID value.BinNodeTankNameID];
                        vx = NaN(value.BinNodeCount,1);
                        vy = NaN(value.BinNodeCount,1);
                        vertx = cell(valueL.BinLinkCount,1);
                        verty = cell(valueL.BinLinkCount,1);
                        nvert = zeros(valueL.BinLinkCount,1);                        
                        value.BinNodeInitialQuality=zeros(1,value.BinNodeCount);
                        sect=4;
                        continue;
                    elseif strcmpi(tok(1:5),'[DEMA') %&& max(value.BinNodeJunctionsBaseDemands)==0
                        sect=8;d=1;
%                         value.BinNodeJunDemandPatternNameID={};
                        continue;
                        % [QUALITY] section
                    elseif strcmpi(tok(1:5),'[QUAL')
                        sect=12;d=1;
                        value.BinCountInitialQualitylines=0;
                        continue;                        
                        % [MIXING] section
                    elseif strcmpi(tok(1:5),'[MIXI')
                        sect=14;d=1;
                        value.BinNodeTankMixModel={};
                        value.BinNodeTankMixID={};
                        value.BinNodeTankMinimumFraction=[];
                        continue;
                        % [COORDINATES] section
                    elseif strcmpi(tok(1:5),'[COOR')
                        sect=17;
                        continue;
                        % [VERTICES] section
                    elseif strcmpi(tok(1:5),'[VERT')
                        sect=18;
                        continue;
                        % [END]
                    elseif strcmpi(tok(1:4),'[END')
                        break;
                    else
                        sect = 0;
                        continue;
                    end
                end
                clear atline;
                atline = checktlines(tline);

                if sect==0
                    continue;
                    % Nodes
                elseif sect==1
                    value.BinNodeJunctionNameID{k}=atline{1};
                    value.BinNodeJunctionIndex(k)=k;
                    value.BinNodeJunctionElevation(k)=str2num(atline{2});
                    if length(atline)>2
                        if ~isempty(atline{3}) && ~sum(atline{3}==';')
                            value.BinNodeJunctionsBaseDemands(k)=single(str2num(atline{3}));
                            if length(atline)>3
                                if ~sum(atline{4}==';')
                                    value.BinNodeJunDemandPatternNameID{k}=atline{4};
                                else
                                    value.BinNodeJunDemandPatternNameID{k}='';
                                end
                            else
                                value.BinNodeJunDemandPatternNameID{k}='';
                            end
                        end
                    end
                    k=k+1;
                elseif sect==2
                    value.BinNodeReservoirNameID{r}=atline{1};
                    value.BinNodeReservoirIndex(r)=k;
                    value.BinNodeReservoirElevation(r)=str2num(atline{2});
                    if length(atline)>2
                        if ~isempty(atline{3}) && ~sum(atline{3}==';')
                            value.BinNodeResDemandPatternNameID{r}=atline{3};
                        else
                            value.BinNodeResDemandPatternNameID{r}='';
                        end
                    else
                        value.BinNodeResDemandPatternNameID{r}='';
                    end
                    k=k+1;
                    r=r+1;
                elseif sect==3
                    value.BinNodeTankNameID{p}=atline{1};
                    value.BinNodeTankIndex(p)=k;
                    value.BinNodeTankElevation(p)=str2num(atline{2});
                    value.BinNodeTankInitialLevel(p)=single(str2num(atline{3}));
                    value.BinNodeTankMinimumWaterLevel(p)=str2num(atline{4});
                    value.BinNodeTankMaximumWaterLevel(p)=single(str2num(atline{5}));
                    value.BinNodeTankDiameter(p)=str2num(atline{6});
                    value.BinNodeTankMinimumWaterVolume(p)=single(str2num(atline{7}));
                    k=k+1;
                    p=p+1;
                    % Demands
                elseif sect==8
                    indd=find(strcmpi(value.BinNodeNameID,atline{1}));
                    if ~isempty(value.BinNodeJunctionsBaseDemandsID)
                        if strcmp(value.BinNodeJunctionsBaseDemandsID{end},atline{1})
                            value.BinNodeJunctionsBaseDemands(indd)=single(str2num(atline{2})); 
                        else
                            value.BinNodeJunctionsBaseDemands(indd)=single(str2num(atline{2}));
                        end
                    else
                        value.BinNodeJunctionsBaseDemands(indd)=single(str2num(atline{2}));
                    end
                    value.BinNodeJunctionsBaseDemandsID{d}=atline{1};
                    if length(atline)>2 
                        value.BinNodeJunDemandPatternNameID{indd}=atline{3};
                    else
                        value.BinNodeJunDemandPatternNameID{indd}='';
                    end
                    d=d+1;   
                    % Quality
                elseif sect==12
                    Hh=find(strcmpi(value.BinNodeNameID,atline{1}));
                    value.BinNodeInitialQuality(Hh)=str2num(atline{2});
                    value.BinCountInitialQualitylines=d;
                    d=d+1;
                elseif sect==14
                    value.BinNodeTankMixID{d}=atline{1};
                    value.BinNodeTankMixModel{d}=atline{2};
                    value.BinNodeTankMinimumFraction(d)=str2num(atline{3});
                    d=d+1;
                elseif sect==17
                    A = textscan(tline,'%s %f %f');
                    % get the node index
                    a=strcmp(A{1},value.BinNodeNameID);
                    index=strfind(a,1);
                    if isempty(index), continue; end
                    vx(index) = A{2};
                    vy(index) = A{3};
                    % Vertices
                elseif sect==18
                    A = textscan(tline,'%s %f %f');
                    index =  find(strcmp(valueL.BinLinkNameID,A{1}));
                    if isempty(index), continue; end
                    nvert(index) = nvert(index) + 1;
                    vertx{index}(nvert(index)) = A{2};
                    verty{index}(nvert(index)) = A{3};
                end
            end
            value.BinNodeType(value.BinNodeJunctionIndex)=obj.TYPENODE(1);
            value.BinNodeType(value.BinNodeReservoirIndex)=obj.TYPENODE(2);
            value.BinNodeType(value.BinNodeTankIndex)=obj.TYPENODE(3);
            value.BinNodeCoordinates{1} = vx;
            value.BinNodeCoordinates{2} = vy;
            value.BinNodeCoordinates{3} = vertx;
            value.BinNodeCoordinates{4} = verty;
            value.BinNodeElevations = single([value.BinNodeJunctionElevation value.BinNodeReservoirElevation value.BinNodeTankElevation]);
            value.BinNodeBaseDemands = single([value.BinNodeJunctionsBaseDemands zeros(1,value.BinNodeReservoirCount) zeros(1,value.BinNodeTankCount)]);
            value.BinNodeIndex=obj.getBinNodeIndex;
        end
        function [valueQualityType] = getBinQualType(obj)
            % Open epanet input file
            [info]=regexp( fileread(obj.BinTempfile), '\n', 'split'); 
            sect=0;valueQualityType={};
            for h=1:length(info)
                tline = info{h};
                if ~ischar(tline),   break,   end
                % Get first token in the line
                tok = strtok(tline);
                % Skip blank Clines and comments
                if isempty(tok), continue, end
                if (tok(1) == ';'), continue, end
                if (tok(1) == '[')
                        % [OPTIONS] section
                    if strcmpi(tok(1:5),'[OPTI')
                        sect=3;
                    end
                end
                if sect==0
                    continue;
                elseif sect==3
                    if strcmp(regexp(tline,'\w*QUALITY*\w','match'),'QUALITY')
                        tl=regexp(tline,'\s*','split');mm=2;
                        if isempty(tl{1})
                            mm=3;
                        end
                        valueQualityType=tl(mm);
                    end
                end
            end
        end
        function [valueCoord,valueRule] = getBinCoordRuleSections(obj, file)
            % Open epanet input file
            [info]=regexp( fileread(file), '\n', 'split'); 
            sect=0;d=1;valueCoord={};valueRule={};dRule=1;
            for h=1:length(info)
                tline = info{h};
                if ~ischar(tline),   break,   end
                % Get first token in the line
                tok = strtok(tline);
                % Skip blank Clines and comments
                if isempty(tok), continue, end
                if (tok(1) == ';'), continue, end
                if (tok(1) == '[')
                        % [COORDINATES] section
                    if strcmpi(tok(1:5),'[COOR')
                        sect=1;
                        valueCoord{d}=tline;
                        continue;
                        % [RULES] section
                    elseif strcmpi(tok(1:5),'[RULE')
                        sect=2;
                        valueRule{dRule}=tline;
                        continue;
                    elseif strcmpi(tok(1:5),'[ENER')
                        sect=0;
                        continue;
                    end
                end
                if sect==0
                    continue;
                elseif sect==1
                    d=d+1;
                    valueCoord{d}=tline;
                elseif sect==2
                    dRule=dRule+1;
                    valueRule{dRule}=tline;
                end
            end
        end
        function value = getBinNodeCoordinates(obj)
            value = NodeCoords(obj, 'Bin');
        end
        function value = getNodeCoordinates(obj, varargin)
            if ~isempty(varargin), value = NodeCoords(obj, varargin{1});
            else value = NodeCoords(obj); end
        end
        function value = getBinNodeNameID(obj)
            % Open epanet input file
            % Open epanet input file
            [~,info] = obj.readInpFile;sect=0;
            for h=1:length(info)
                tline = info{h};
                if ~ischar(tline),   break,   end
                % Get first token in the line
                tok = strtok(tline);
                % Skip blank Clines and comments
                if isempty(tok), continue, end
                if (tok(1) == ';'), continue, end
                if (tok(1) == '[')
                    % [JUNCTIONS] section
                    if strcmpi(tok(1:5),'[JUNC')
                        sect=1;k=1;
                        value.BinNodeJunctionNameID={};
                        continue;
                    elseif strcmpi(tok(1:5),'[RESE')
                        sect=2;r=1;
                        value.BinNodeReservoirNameID={};
                        continue;
                        % [TANKS] section
                    elseif strcmpi(tok(1:5),'[TANK')
                        sect=3;p=1;
                        value.BinNodeTankNameID={};
                        continue;
                        % [END]
                    elseif strcmpi(tok(1:4),'[END')
                        value.BinNodeNameID=[value.BinNodeJunctionNameID value.BinNodeReservoirNameID value.BinNodeTankNameID];
                        break;
                    else
                        sect = 0;
                        continue;
                    end
                end
                clear atline;
                atline = checktlines(tline);
                if sect==0
                    continue;
                    % Nodes
                elseif sect==1
                    value.BinNodeJunctionNameID{k}=atline{1};
                    k=k+1;
                elseif sect==2
                    value.BinNodeReservoirNameID{r}=atline{1};
                    r=r+1;
                elseif sect==3
                    value.BinNodeTankNameID{p}=atline{1};
                    p=p+1;
                end
            end
        end
        function value = getBinLinkNameID(obj)
            sect=0;i=1;t=1;q=1;
            % Open epanet input file
            [~,info] = obj.readInpFile;
            for h=1:length(info)
                tline = info{h};
                if ~ischar(tline),   break,   end
                % Get first token in the line
                tok = strtok(tline);
                % Skip blank Clines and comments
                if isempty(tok), continue, end
                if (tok(1) == ';'), continue, end
                if (tok(1) == '[')
                       % [PIPES] section
                    if strcmpi(tok(1:5),'[PIPE')
                        sect=1;
                        value.BinLinkPipeNameID={};
                        continue;
                        % [PUMPS] section
                    elseif strcmpi(tok(1:5),'[PUMP')
                        sect=2;
                        value.BinLinkPumpNameID={};
                        continue;
                        % [VALVES] section
                    elseif strcmpi(tok(1:5),'[VALV')
                        sect=3;
                        value.BinLinkValveNameID={};                      
                        continue;
                    elseif strcmpi(tok(1:5),'[REAC')
                        sect=4;
                        continue;                        
                        % [END]
                    elseif strcmpi(tok(1:4),'[END')
                        break;
                    else
                        sect = 0;
                        continue;
                    end
                end
                clear atline;
                atline = checktlines(tline);
                if sect==0
                    continue;
                    % Links
                elseif sect==1
                    value.BinLinkPipeNameID{t}=atline{1};
                    t=t+1;
                elseif sect==2
                    value.BinLinkPumpNameID{q}=atline{1};
                    q=q+1;
                elseif sect==3
                    value.BinLinkValveNameID{i}=atline{1};
                    i=i+1;
                end
            end
            value.BinLinkNameID = [value.BinLinkPipeNameID value.BinLinkPumpNameID value.BinLinkValveNameID];
        end
        function value = getBinLinksInfo(obj)
            sect=0;i=1;t=1;q=1;d=1;value=[];
            % Open epanet input file
            [~,info] = obj.readInpFile;
            for h=1:length(info)
                tline = info{h};
                if ~ischar(tline),   break,   end
                % Get first token in the line
                tok = strtok(tline);
                % Skip blank Clines and comments
                if isempty(tok), continue, end
                if (tok(1) == ';'), continue, end
                [value, cont, sect, i,t,q,d] = getLV(tok,value,sect,tline,i,t,q,d);
                if cont==0
                    break;
                end
            end
            if ~sum(value.BinLinkBulkReactionCoeff)
                value.BinLinkBulkReactionCoeff=value.BinLinkGlobalBulkReactionCoeff*ones(1,value.BinLinkCount);
                value.BinLinkBulkReactionCoeff(value.BinLinkPumpIndex)=0;
                value.BinLinkBulkReactionCoeff(value.BinLinkValveIndex)=0;
            end
            if ~sum(value.BinLinkWallReactionCoeff)
                value.BinLinkWallReactionCoeff=value.BinLinkGlobalWallReactionCoeff*ones(1,value.BinLinkCount);
                value.BinLinkWallReactionCoeff(value.BinLinkPumpIndex)=0;
                value.BinLinkWallReactionCoeff(value.BinLinkValveIndex)=0;
            end
            value.BinLinkSettings = [value.BinLinkPipeRoughness zeros(1,value.BinLinkPumpCount) value.BinLinkValveSetting]';
            value.BinLinkDiameters = single([value.BinLinkPipeDiameters zeros(1,value.BinLinkPumpCount) value.BinLinkValveDiameters]);
            value.BinLinkLengths = single([value.BinLinkPipeLengths zeros(1,value.BinLinkPumpCount) zeros(1,value.BinLinkValveCount)]);
            value.BinLinkRoughnessCoeff = [value.BinLinkPipeRoughness zeros(1,value.BinLinkPumpCount) zeros(1,value.BinLinkValveCount)];
            value.BinLinkType(value.BinLinkPipeIndex)=obj.TYPELINK(2);
            value.BinLinkType(value.BinLinkPumpIndex)=obj.TYPELINK(3);
            value.BinLinkType(value.BinLinkValveIndex)=value.BinLinkValveType;
            
            b={};
            for i=1:value.BinLinkCount
                ind=find((strcmp(value.BinLinkInitialStatusNameID,value.BinLinkNameID{i}))==1);
                if isempty(ind), ind=0; end
                if ind~=0 
                    if sum(value.BinLinkPumpIndex==i)
                        bb{i}=value.BinLinkInitialStatus{ind};
                        r=value.BinLinkNameID(i);
                        b{i}=r{1};
                    else
                        b{i}=value.BinLinkNameID{i};
                        bb{i}=value.BinLinkInitialStatus{ind};
                    end
                else
                    b{i}=value.BinLinkNameID{i};
                    bb{i}='Open';
                end
            end
            value.BinLinkInitialStatusNameID=b;
            value.BinLinkInitialStatus=bb;
            value.BinLinkPumpStatus=value.BinLinkInitialStatus(value.BinLinkPumpIndex);
            value.BinLinkPumpStatusNameID=value.BinLinkInitialStatusNameID(value.BinLinkPumpIndex);
            value.BinLinkValveStatus=value.BinLinkInitialStatus(value.BinLinkValveIndex);
            value.BinLinkValveStatusNameID=value.BinLinkInitialStatusNameID(value.BinLinkValveIndex);
            value.BinLinkIndex=obj.getBinLinkIndex;
        end
        function value = getBinControlsInfo(obj)
            % Open epanet input file
            [~,info] = obj.readInpFile;
            for h=1:length(info)
                tline = info{h};
                if ~ischar(tline),   break,   end
                % Get first token in the line
                tok = strtok(tline);
                % Skip blank Clines and comments
                if isempty(tok), continue, end
                if (tok(1) == ';'), continue, end
                if (tok(1) == '[')                
                        % [CONTROLS] section
                    if strcmpi(tok(1:5),'[CONT')
                        sect=1;d=1;
                        value.BinControlsInfo={};
                        value.BinControlLinksID={};
                        value.BinControlNodesID={};
                        continue;
                        % [END]
                    elseif strcmpi(tok(1:4),'[END')
                        break;
                    else
                        sect = 0;
                        continue;
                    end
                end

                if sect==0
                    continue;
                    % Nodes
                elseif sect==1
                    clear atline;
                    atline = checktlines(tline);
                    value.BinControlsInfo{d}=atline;
                    if length(atline)>1
                        value.BinControlLinksID{d}=atline{2};
                        t = regexp(tline, '\w*TIME\w*','match');
                        if length(t)==0
                            value.BinControlNodesID{d}=atline{6};
                        end
                    end
                    d=d+1;
                end
            end
            value.BinControlRulesCount=length(value.BinControlsInfo);        
        end
        function value = getBinRulesControlsInfo(obj)
            % Open epanet input file
            value={};
            [~,info] = obj.readInpFile;
            for h=1:length(info)
                tline = info{h};
                if ~ischar(tline),   break,   end
                % Get first token in the line
                tok = strtok(tline);
                % Skip blank Clines and comments
                if isempty(tok), continue, end
                if (tok(1) == ';'), continue, end
                if (tok(1) == '[')                
                        % [RULES] section
                    if strcmpi(tok(1:5),'[RULE')
                        sect=1;d=1;dd=0;
                        value.BinRulesControlsInfo={};
                        value.BinRulesControlLinksID={};
                        value.BinRulesControlNodesID={};
                        value.BinRulesCount=0;
                        continue;
                        % [END]
                    elseif strcmpi(tok(1:4),'[END')
                        break;
                    else
                        sect = 0;
                        continue;
                    end
                end

                if sect==0
                    continue;
                    % Nodes
                elseif sect==1
                    clear atline;
                    atline = checktlines(tline);
                    if strcmpi(atline{1},{'RULE'})
                        d=1;value.BinRulesCount=value.BinRulesCount+1;
                    end
                    value.BinRulesControlsInfo{value.BinRulesCount}{d}=atline;
                    if sum(strcmpi(atline{2},{'LINK','PIPE','PUMP','VALVE'}))
                        value.BinRulesControlLinksID{value.BinRulesCount}{d}=atline{3};
                    elseif sum(strcmpi(atline{2},{'NODE','JUNCTION','RESERVOIR','TANK'}))
                        value.BinRulesControlNodesID{value.BinRulesCount}{d}=atline{3};
                    end
                    d=d+1;
                end
            end
        end
        function value = getBinOptionsInfo(obj)
            % Open epanet input file
            [~,info] = obj.readInpFile;
            value.BinUnits_SI_Metric=0; value.BinUnits_US_Customary=0;
            for h=1:length(info)
                tline = info{h};
                if ~ischar(tline),   break,   end
                % Get first token in the line
                tok = strtok(tline);
                % Skip blank Clines and comments
                if isempty(tok), continue, end
                if (tok(1) == ';'), continue, end
                if (tok(1) == '[')
                    % [OPTIONS] section
                    if strcmpi(tok(1:5),'[OPTI')
                        sect=1;
                        value.BinLinkFlowUnits={};
                        value.BinOptionsHeadloss={};
                        value.BinNodePressureUnits={};
                        value.BinOptionsSpecificGravity=[];
                        value.BinOptionsViscosity=[];
                        value.BinOptionsMaxTrials=[];
                        value.BinOptionsAccuracyValue=[];
                        value.BinOptionsUnbalanced={};
                        value.BinOptionsPattern=[];
                        value.BinOptionsPatternDemandMultiplier=[];
                        value.BinOptionsEmitterExponent=[];
                        value.BinQualityType={};
                        value.BinQualityCode=[];
                        value.BinQualityTraceNodeIndex=[];
                        value.BinQualityTraceNodeID={};
                        value.BinQualityUnits={};
                        value.BinOptionsDiffusivity=[];
                        value.BinOptionsQualityTolerance=[];
                        continue;
                        % [END]
                    elseif strcmpi(tok(1:4),'[END')
                        break;
                    else
                        sect = 0;
                        continue;
                    end
                end
                if sect==0
                    continue;
                    % Options
                elseif sect==1
                    clear atline;
                    atline = checktlines(tline);
                    value = getOptionsValues(obj, value, atline);
                end
            end
            % US Customary - SI metric
            if find(strcmp(value.BinLinkFlowUnits, obj.TYPEUNITS))<6
                value.BinUnits_US_Customary=1;
            else
                value.BinUnits_SI_Metric=1;
            end
        end
        function value = getBinUnits(obj)
            value.BinLinkFlowUnits=obj.getBinOptionsInfo.BinLinkFlowUnits;
            if obj.getBinOptionsInfo.BinUnits_US_Customary==1;
                value.BinQualityUnits='mg/L or ug/L';
                value.BinNodePressureUnits='psi';
                value.BinPatternDemandsUnits=value.BinLinkFlowUnits;
                value.BinLinkPipeDiameterUnits='inches';
                value.BinNodeTankDiameterUnits='feet';
                value.BinEnergyEfficiencyUnits='percent';
                value.BinNodeElevationUnits='feet';
                value.BinNodeDemandUnits=value.BinLinkFlowUnits;
                value.BinNodeEmitterCoefficientUnits='flow units @ 1 psi drop';
                value.BinEnergyUnits='kwatt-hours';
                value.BinLinkFrictionFactorUnits='unitless';
                value.BinNodeHeadUnits='feet';
                value.BinLinkLengthsUnits='feet';
                value.BinLinkMinorLossCoeffUnits='unitless';
                value.BinLinkPumpPowerUnits='horsepower';
                value.BinQualityReactionCoeffBulkUnits='1/day (1st-order)';
                value.BinQualityReactionCoeffWallUnits='mass/sq-ft/day (0-order), ft/day (1st-order)';
                value.BinLinkPipeRoughnessCoeffUnits='millifeet(Darcy-Weisbach), unitless otherwise';
                value.BinQualitySourceMassInjectionUnits='mass/minute';
                value.BinLinkVelocityUnits='ft/sec';
                value.BinNodeTankVolumeUnits='cubic feet';
                value.BinQualityWaterAgeUnits='hours';
            else % SI Metric
                value.BinQualityUnits='mg/L or ug/L';
                value.BinNodePressureUnits='meters';
                value.BinPatternDemandsUnits=value.BinLinkFlowUnits;
                value.BinLinkPipeDiameterUnits='millimeters';
                value.BinNodeTankDiameterUnits='meters';
                value.BinEnergyEfficiencyUnits='percent';
                value.BinNodeElevationUnits='meters';
                value.BinNodeDemandUnits=value.BinLinkFlowUnits;
                value.BinNodeEmitterCoefficientUnits='flow units @ 1 meter drop';
                value.BinEnergyUnits='kwatt-hours';
                value.BinLinkFrictionFactorUnits='unitless';
                value.BinNodeHeadUnits='meters';
                value.BinLinkLengthsUnits='meters';
                value.BinLinkMinorLossCoeffUnits='unitless';
                value.BinLinkPumpPowerUnits='kwatts';
                value.BinQualityReactionCoeffBulkUnits='1/day (1st-order)';
                value.BinQualityReactionCoeffWallUnits='mass/sq-m/day(0-order), meters/day (1st-order)';
                value.BinLinkPipeRoughnessCoeffUnits='mm(Darcy-Weisbach), unitless otherwise';
                value.BinQualitySourceMassInjectionUnits='mass/minute';
                value.BinLinkVelocityUnits='meters/sec';
                value.BinNodeTankVolumeUnits='cubic meters';
                value.BinQualityWaterAgeUnits='hours';
            end   
        end
        function value = getBinTimesInfo(obj)
            % Open epanet input file
            [~,info] = obj.readInpFile;
            sect=0;
            for h=1:length(info)
                tline = info{h};
                if ~ischar(tline),   break,   end
                % Get first token in the line
                tok = strtok(tline);
                % Skip blank Clines and comments
                if isempty(tok), continue, end
                if (tok(1) == ';'), continue, end
                if (tok(1) == '[')
                        % [TIMES] section
                    if strcmpi(tok(1:5),'[TIME')
                        sect=1;
                        value.BinTimeSimulationDuration=[];
                        value.BinTimeHydraulicStep=[];
                        value.BinTimeQualityStep=[];
                        value.BinTimePatternStep=[];
                        value.BinTimePatternStart=[];
                        value.BinTimeReportingStep=[];
                        value.BinTimeReportingStart=[];
                        value.BinTimeStatisticsIndex=[];
                        value.BinTimeStatistics='';
                        continue;        
                        % [END]
                    elseif strcmpi(tok(1:4),'[END')
                        break;
                    else
                        sect = 0;
                        continue;
                    end
                end

                if sect==0
                    continue;
                    % Times
                elseif sect==1
                    clear atline;
                    atline = checktlines(tline);
                    r=atline{2};
                    if length(atline)>2 
                        if find(~strcmpi(atline{end},{'HOURS','MIN','SECONDS','MINUTES','DAYS'})==0)
                            r=atline{end-1};
                        else
                            r=atline{end};
                        end
                    end
                    value = getTimes(obj, r, atline, value);                            
                end
            end
        end
        function value = getCMDCODE(obj)
            value = obj.CMDCODE;
        end
        function setCMDCODE(obj, code)
            value = code;
            if code~=0 && code~=1,  value = obj.CMDCODE; end
            obj.CMDCODE = value;
        end
    end
end
function [Errcode] = ENwriteline (line,LibEPANET)
    [Errcode]=calllib(LibEPANET,'ENwriteline',line);
    if Errcode
        ENgeterror(Errcode,LibEPANET);
    end
end
function [Errcode] = ENaddpattern(patid,LibEPANET)
    Errcode=calllib(LibEPANET,'ENaddpattern',patid);
    if Errcode
        ENgeterror(Errcode,LibEPANET);
    end
end
function [Errcode] = ENclose(LibEPANET)
    [Errcode]=calllib(LibEPANET,'ENclose');
    if Errcode
        ENgeterror(Errcode,LibEPANET);
    end
end
function [Errcode] = ENcloseH(LibEPANET)
    [Errcode]=calllib(LibEPANET,'ENcloseH');
    if Errcode
        ENgeterror(Errcode,LibEPANET);
    end
end
function [Errcode, value] = ENgetnodevalue(index, paramcode,LibEPANET)
    value=single(0);
    %p=libpointer('singlePtr',value);
    index=int32(index);
    paramcode=int32(paramcode);
    [Errcode, value]=calllib(LibEPANET,'ENgetnodevalue',index, paramcode,value);
    if Errcode==240, value=NaN; end
    value = double(value);
end
function [Errcode, value] = ENgetbasedemand(index,numdemands,LibEPANET)
    %epanet20100
    [Errcode,value]=calllib(LibEPANET,'ENgetbasedemand',index,numdemands,0);
    if Errcode
        ENgeterror(Errcode,LibEPANET);
    end
end
function [Errcode, value] = ENgetnumdemands(index,LibEPANET)
    %epanet20100
    [Errcode,value]=calllib(LibEPANET,'ENgetnumdemands',index,0);
    if Errcode
        ENgeterror(Errcode,LibEPANET);
    end
end
function [Errcode, value] = ENgetdemandpattern(index,numdemands,LibEPANET)
    %epanet20100
    [Errcode,value]=calllib(LibEPANET,'ENgetdemandpattern',index,numdemands,0);
    if Errcode
        ENgeterror(Errcode,LibEPANET);
    end
end
function [Errcode, value] = ENgetstatistic(code,LibEPANET)
    %epanet20100
    [Errcode,value]=calllib(LibEPANET,'ENgetstatistic',code,0);
    if Errcode
        ENgeterror(Errcode,LibEPANET);
    end
end
function [Errcode] = ENcloseQ(LibEPANET)
    [Errcode]=calllib(LibEPANET,'ENcloseQ');
    if Errcode
        ENgeterror(Errcode,LibEPANET);
    end
end
function [Errcode, ctype,lindex,setting,nindex,level] = ENgetcontrol(cindex,LibEPANET)
    [Errcode, ctype,lindex,setting,nindex,level]=calllib(LibEPANET,'ENgetcontrol',cindex,0,0,0,0,0);
    if Errcode
        ENgeterror(Errcode,LibEPANET);
    end
end
function [Errcode, count] = ENgetcount(countcode,LibEPANET)
    [Errcode,count]=calllib(LibEPANET,'ENgetcount',countcode,0);
    if Errcode
        ENgeterror(Errcode,LibEPANET);
    end
end
function [errmsg, e] = ENgeterror(Errcode,LibEPANET)
    e=0; errmsg='';
    if Errcode
        [e,errmsg] = calllib(LibEPANET,'ENgeterror',Errcode,char(32*ones(1,79)),79);
        if e, [e,errmsg] = calllib(LibEPANET,'ENgeterror',e,char(32*ones(1,79)),79); end
    end
end
function [Errcode,flowunitsindex] = ENgetflowunits(LibEPANET)
[Errcode, flowunitsindex]=calllib(LibEPANET,'ENgetflowunits',0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode,id] = ENgetlinkid(index,LibEPANET)
id=char(32*ones(1,31));
[Errcode,id]=calllib(LibEPANET,'ENgetlinkid',index,id);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode,index] = ENgetlinkindex(id,LibEPANET)
[Errcode,~,index]=calllib(LibEPANET,'ENgetlinkindex',id,0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode,from,to] = ENgetlinknodes(index,LibEPANET)
[Errcode,from,to]=calllib(LibEPANET,'ENgetlinknodes',index,0,0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, typecode] = ENgetlinktype(index,LibEPANET)
[Errcode,typecode]=calllib(LibEPANET,'ENgetlinktype',index,0);
if ~isnumeric(typecode), typecode = getTypeLink(typecode); end
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, value] = ENgetlinkvalue(index, paramcode,LibEPANET)
[Errcode,value]=calllib(LibEPANET,'ENgetlinkvalue',index, paramcode, 0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
value = double(value);
end
function [Errcode,id] = ENgetnodeid(index,LibEPANET)
id=char(32*ones(1,31));
[Errcode,id]=calllib(LibEPANET,'ENgetnodeid',index,id);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode,index] = ENgetnodeindex(id,LibEPANET)
[Errcode, ~, index]=calllib(LibEPANET,'ENgetnodeindex',id,0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, type] = ENgetnodetype(index,LibEPANET)
[Errcode,type]=calllib(LibEPANET,'ENgetnodetype',index,0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, value] = ENgetoption(optioncode,LibEPANET)
[Errcode,value]=calllib(LibEPANET,'ENgetoption',optioncode,0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, id] = ENgetpatternid(index,LibEPANET)
id=char(32*ones(1,31));
[Errcode,id]=calllib(LibEPANET,'ENgetpatternid',index,id);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, id] = ENgetcurveid(index,LibEPANET)
%New version dev2.1
id=char(32*ones(1,31));
[Errcode,id]=calllib(LibEPANET,'ENgetcurveid',index,id);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, index] = ENgetpatternindex(id,LibEPANET)
[Errcode,~, index]=calllib(LibEPANET,'ENgetpatternindex',id,0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, len] = ENgetpatternlen(index,LibEPANET)
[Errcode,len]=calllib(LibEPANET,'ENgetpatternlen',index,0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, value] = ENgetpatternvalue(index, period,LibEPANET)
[Errcode,value]=calllib(LibEPANET,'ENgetpatternvalue',index, period, 0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode,qualcode,tracenode] = ENgetqualtype(LibEPANET)
[Errcode,qualcode,tracenode]=calllib(LibEPANET,'ENgetqualtype',0,0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, timevalue] = ENgettimeparam(paramcode,LibEPANET)
[Errcode,timevalue]=calllib(LibEPANET,'ENgettimeparam',paramcode,0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, LibEPANET] = ENgetversion(LibEPANET)
[Errcode,LibEPANET]=calllib(LibEPANET,'ENgetversion',0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENinitH(flag,LibEPANET)
[Errcode]=calllib(LibEPANET,'ENinitH',flag);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENinitQ(saveflag,LibEPANET)
[Errcode]=calllib(LibEPANET,'ENinitQ',saveflag);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function ENMatlabCleanup(LibEPANET)
% Load library
if libisloaded(LibEPANET)
    unloadlibrary(LibEPANET);
else
    errstring =['Library ', LibEPANET, '.dll was not loaded.'];
    disp(errstring);
end
end
function ENLoadLibrary(LibEPANETpath,LibEPANET,varargin)
if ~libisloaded(LibEPANET)
    warning('off', 'MATLAB:loadlibrary:TypeNotFound');
    arch=computer('arch');
    if ~isdeployed
        if strcmpi(arch(1:4),'glnx')
            loadlibrary(LibEPANET,[LibEPANETpath,LibEPANET,'.h']);
        else
            loadlibrary([LibEPANETpath,LibEPANET],[LibEPANETpath,LibEPANET,'.h']);
        end
    else
        loadlibrary('epanet2',@mxepanet); %loadlibrary('epanet2','epanet2.h','mfilename','mxepanet.m');
    end
    warning('on', 'MATLAB:loadlibrary:TypeNotFound');
    if ~isempty(varargin), return; end
end
if libisloaded(LibEPANET)
    LibEPANETString = 'EPANET loaded sucessfuly.';
    disp(LibEPANETString);
else
    warning('There was an error loading the EPANET library (DLL).')
end
end
function [Errcode, tstep] = ENnextH(LibEPANET)
[Errcode,tstep]=calllib(LibEPANET,'ENnextH',int32(0));
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, tstep] = ENnextQ(LibEPANET)
[Errcode,tstep]=calllib(LibEPANET,'ENnextQ',int32(0));
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
tstep = double(tstep);
end
function [Errcode] = ENopen(inpname,repname,binname,LibEPANET) %DE
    Errcode=calllib(LibEPANET,'ENopen',inpname,repname,binname);
    if Errcode && Errcode~=200
       [~,errmsg] = calllib(LibEPANET,'ENgeterror',Errcode,char(32*ones(1,79)),79);
       disp(errmsg);
    end
end
function [Errcode] = ENopenH(LibEPANET)
[Errcode]=calllib(LibEPANET,'ENopenH');
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENopenQ(LibEPANET)
[Errcode]=calllib(LibEPANET,'ENopenQ');
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENreport(LibEPANET)
[Errcode]=calllib(LibEPANET,'ENreport');
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENresetreport(LibEPANET)
[Errcode]=calllib(LibEPANET,'ENresetreport');
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, t] = ENrunH(LibEPANET)
[Errcode,t]=calllib(LibEPANET,'ENrunH',int32(0));
t = double(t);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, t] = ENrunQ(LibEPANET)
t=int32(0);
[Errcode,t]=calllib(LibEPANET,'ENrunQ',t);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsaveH(LibEPANET)
[Errcode]=calllib(LibEPANET,'ENsaveH');
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsavehydfile(fname,LibEPANET)
[Errcode]=calllib(LibEPANET,'ENsavehydfile',fname);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsaveinpfile(inpname,LibEPANET)
Errcode=calllib(LibEPANET,'ENsaveinpfile',inpname);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsetcontrol(cindex,ctype,lindex,setting,nindex,level,LibEPANET)
[Errcode]=calllib(LibEPANET,'ENsetcontrol',cindex,ctype,lindex,setting,nindex,level);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsetlinkvalue(index, paramcode, value,LibEPANET)
[Errcode]=calllib(LibEPANET,'ENsetlinkvalue',index, paramcode, value);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsetnodevalue(index, paramcode, value,LibEPANET)
[Errcode]=calllib(LibEPANET,'ENsetnodevalue',index, paramcode, value);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsetoption(optioncode,value,LibEPANET)
[Errcode]=calllib(LibEPANET,'ENsetoption',optioncode,value);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsetpattern(index, factors, nfactors,LibEPANET)
[Errcode]=calllib(LibEPANET,'ENsetpattern',index,factors,nfactors);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsetpatternvalue(index, period, value,LibEPANET)
[Errcode]=calllib(LibEPANET,'ENsetpatternvalue',index, period, value);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsetqualtype(qualcode,chemname,chemunits,tracenode,LibEPANET)
[Errcode]=calllib(LibEPANET,'ENsetqualtype',qualcode,chemname,chemunits,tracenode);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsetreport(command,LibEPANET)
[Errcode]=calllib(LibEPANET,'ENsetreport',command);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsetstatusreport(statuslevel,LibEPANET)
[Errcode]=calllib(LibEPANET,'ENsetstatusreport',statuslevel);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsettimeparam(paramcode, timevalue,LibEPANET)
paramcode=int32(paramcode);
timevalue=int32(timevalue);
[Errcode]=calllib(LibEPANET,'ENsettimeparam',paramcode,timevalue);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsolveH(LibEPANET)
[Errcode]=calllib(LibEPANET,'ENsolveH');
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsolveQ(LibEPANET)
[Errcode]=calllib(LibEPANET,'ENsolveQ');
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, tleft] = ENstepQ(LibEPANET)
tleft=int32(0);
[Errcode,tleft]=calllib(LibEPANET,'ENstepQ',tleft);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
tleft=double(tleft);
end
function [Errcode] = ENusehydfile(hydfname,LibEPANET)
[Errcode]=calllib(LibEPANET,'ENusehydfile',hydfname);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsetcurve(index, x, y, nfactors,LibEPANET)
% New version dev2.1
[Errcode]=calllib(LibEPANET,'ENsetcurve',index,x,y,nfactors);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, x, y] = ENgetcurvevalue(index, period,LibEPANET)
% New version dev2.1
[Errcode,x, y]=calllib(LibEPANET,'ENgetcurvevalue',index, period, 0, 0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, x, y] = ENsetcurvevalue(index, pnt, x, y, LibEPANET)
% New version dev2.1
% index  = curve index
% pnt    = curve's point number
% x      = curve x value
% y      = curve y value                            
% sets x,y point for a specific point and curve 
[Errcode]=calllib(LibEPANET,'ENsetcurvevalue',index, pnt, x, y);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, index] = ENgetcurveindex(id,LibEPANET)
% New version dev2.1
[Errcode,~, index]=calllib(LibEPANET,'ENgetcurveindex',id,0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENaddcurve(cid,LibEPANET)
% New version dev2.1
Errcode=calllib(LibEPANET,'ENaddcurve',cid);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, ids, nvalue, xvalue, yvalue] = ENgetcurve(value,LibEPANET)
[~,~,nvalue,~,~]=calllib(LibEPANET,'ENgetcurve',value,char(32*ones(1,31)),0,0,0);
[Errcode,ids,~, xvalue, yvalue]=calllib(LibEPANET,'ENgetcurve',value,char(32*ones(1,31)),0,zeros(1,nvalue),zeros(1,nvalue));
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, len] = ENgetcurvelen(index,LibEPANET)
% New version dev2.1
[Errcode,len]=calllib(LibEPANET,'ENgetcurvelen',index,0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, value] = ENgetheadcurveindex(pumpindex,LibEPANET)
% New version dev2.1
[Errcode,value]=calllib(LibEPANET,'ENgetheadcurveindex',pumpindex,0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, value] = ENgetpumptype(pumpindex,LibEPANET)
% New version dev2.1
[Errcode,value]=calllib(LibEPANET,'ENgetpumptype',pumpindex,0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, value] = ENgetaveragepatternvalue(index,LibEPANET) 
% return  average pattern value
% New version dev2.1
[Errcode,value]=calllib(LibEPANET,'ENgetaveragepatternvalue',index,0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode, x, y] = ENgetcoord(index,LibEPANET)
% New version dev2.1
[Errcode,x,y]=calllib(LibEPANET,'ENgetcoord',index,0,0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsetcoord(index,x,y,LibEPANET)
% New version dev2.1
[Errcode]=calllib(LibEPANET,'ENsetcoord',index,x,y);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsetbasedemand(index, demandIdx, value, LibEPANET)
% New version dev2.1
[Errcode]=calllib(LibEPANET,'ENsetbasedemand',index, demandIdx, value);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode] = ENsetdemandpattern(index, demandIdx, patInd, LibEPANET)
% New version 
[Errcode]=calllib(LibEPANET,'ENsetdemandpattern',index, demandIdx, patInd);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [Errcode,qualcode,chemname,chemunits,tracenode] = ENgetqualinfo(LibEPANET)
chm=char(32*ones(1,31));
[Errcode,qualcode,chemname,chemunits,tracenode]=calllib(LibEPANET,'ENgetqualinfo',0,chm,chm,0);
if Errcode
    ENgeterror(Errcode,LibEPANET);
end
end
function [index,Errcode] = ENaddnode(obj,nodeid,nodetype)
% dev-net-builder
[Errcode]=calllib(obj.LibEPANET,'ENaddnode',nodeid,nodetype);
disp(obj.getError(Errcode));
index = obj.getNodeIndex(nodeid);
end
function [index,Errcode] = ENaddlink(obj,linkid,linktype,fromnode,tonode)
% dev-net-builder
[Errcode]=calllib(obj.LibEPANET,'ENaddlink',linkid,linktype,fromnode,tonode);
disp(obj.getError(Errcode));
index = obj.getLinkIndex(linkid);
end
function [Errcode] = ENdeletenode(obj,indexNode)
% dev-net-builder
[Errcode]=calllib(obj.LibEPANET,'ENdeletenode',indexNode);
disp(obj.getError(Errcode));
end
function [Errcode] = ENdeletelink(obj,indexLink)
% dev-net-builder
[Errcode]=calllib(obj.LibEPANET,'ENdeletelink',indexLink);
disp(obj.getError(Errcode));
end
function [Errcode] = ENsetheadcurveindex(obj,pumpindex,curveindex)
% dev-net-builder
[Errcode]=calllib(obj.LibEPANET,'ENsetheadcurveindex',pumpindex,curveindex);
disp(obj.getError(Errcode));
end
% function [Errcode, nPremises, nTrueActions, nFalseActions, priority] = EN_getrule(cindex,LibEPANET)
%     [Errcode, nPremises, nTrueActions, nFalseActions, priority]=calllib(LibEPANET,'ENgetrule',cindex,0,0,0,0);
%     if Errcode
%         ENgeterror(Errcode,LibEPANET);
%     end
% end
function [obj] = MSXMatlabSetup(obj,msxname,varargin)
arch = computer('arch');
pwdepanet = fileparts(which(mfilename));
if strcmp(arch,'win64')
    obj.MSXLibEPANETPath = [pwdepanet,'\64bit\'];
elseif strcmp(arch,'win32')
    obj.MSXLibEPANETPath = [pwdepanet,'\32bit\'];
end
if strcmpi(arch(1:4),'glnx')
    obj.MSXLibEPANETPath = [pwdepanet,'/glnx/'];
end
            
if ~isempty(varargin)
    if varargin{1}{1}~=1
        if nargin==3 
            obj.MSXLibEPANETPath=char(varargin{1});
            obj.MSXLibEPANETPath=[fileparts(obj.MSXLibEPANETPath),'\'];
            if isempty(varargin{1})
                obj.MSXLibEPANETPath='';
            end
        end
    end
end
obj.MSXLibEPANET='epanetmsx'; % Get DLL LibEPANET (e.g. epanet20012x86 for 32-bit)
if ~libisloaded(obj.MSXLibEPANET)
    loadlibrary([obj.MSXLibEPANETPath,obj.MSXLibEPANET],[obj.MSXLibEPANETPath,[obj.MSXLibEPANET,'.h']]);
end

obj.MSXFile = which(char(msxname));
%Save the temporary msx file
mm=0;
if ~isempty(varargin)
    if varargin{1}{1}==1
        mm=1; %for set (write) msx functions 
    end
end
if mm==1
    if ~iscell(varargin{1})
        obj.MSXTempFile=obj.MSXFile;
    end
else
    obj.MSXTempFile=[obj.MSXFile(1:end-4),'_temp.msx'];
    copyfile(obj.MSXFile,obj.MSXTempFile);
end
%Open the file
[obj.Errcode] = MSXopen(obj);
obj.MSXEquationsTerms = obj.getMSXEquationsTerms;
obj.MSXEquationsPipes = obj.getMSXEquationsPipes;
obj.MSXEquationsTanks = obj.getMSXEquationsTanks;
obj.MSXSpeciesCount = obj.getMSXSpeciesCount;
obj.MSXConstantsCount = obj.getMSXConstantsCount;
obj.MSXParametersCount = obj.getMSXParametersCount;
obj.MSXPatternsCount = obj.getMSXPatternsCount;
obj.MSXSpeciesIndex = obj.getMSXSpeciesIndex;
obj.MSXSpeciesNameID = obj.getMSXSpeciesNameID;
obj.MSXSpeciesType = obj.getMSXSpeciesType;
obj.MSXSpeciesUnits = obj.getMSXSpeciesUnits;
obj.MSXSpeciesATOL = obj.getMSXSpeciesATOL;
obj.MSXSpeciesRTOL = obj.getMSXSpeciesRTOL;
obj.MSXConstantsNameID = obj.getMSXConstantsNameID;
obj.MSXConstantsValue  = obj.getMSXConstantsValue;
obj.MSXConstantsIndex = obj.getMSXConstantsIndex;
obj.MSXParametersNameID = obj.getMSXParametersNameID;
obj.MSXParametersIndex = obj.getMSXParametersIndex;
obj.MSXParametersTanksValue = obj.getMSXParametersTanksValue;
obj.MSXParametersPipesValue = obj.getMSXParametersPipesValue;
obj.MSXPatternsNameID = obj.getMSXPatternsNameID;
obj.MSXPatternsIndex = obj.getMSXPatternsIndex;
obj.MSXPatternsLengths = obj.getMSXPatternsLengths;
obj.MSXNodeInitqualValue = obj.getMSXNodeInitqualValue;
obj.MSXLinkInitqualValue = obj.getMSXLinkInitqualValue;
obj.MSXSources = obj.getMSXSources;
obj.MSXSourceType = obj.getMSXSourceType;
obj.MSXSourceLevel = obj.getMSXSourceLevel;
obj.MSXSourcePatternIndex = obj.getMSXSourcePatternIndex;
obj.MSXSourceNodeNameID = obj.getMSXSourceNodeNameID;
obj.MSXPattern = obj.getMSXPattern;
end
function [Errcode] = MSXopen(obj,varargin)
[Errcode] = calllib(obj.MSXLibEPANET,'MSXopen',obj.MSXTempFile);
if Errcode
    MSXerror(Errcode,obj.MSXLibEPANET);
end
if (Errcode == 520)
    disp('current MSX project will be closed and the new project will be opened');
    [Errcode] = MSXclose(obj);
    if Errcode
        MSXerror(Errcode,obj.MSXLibEPANET);
    else
        [Errcode] = calllib(obj.MSXLibEPANET,'MSXopen',obj.MSXTempFile);
        if Errcode
            MSXerror(Errcode,obj.MSXLibEPANET);
        end
    end
end
end
function [Errcode] = MSXclose(obj)
[Errcode] = calllib(obj.MSXLibEPANET,'MSXclose');
if Errcode
    MSXerror(Errcode,obj.MSXLibEPANET);
end
end
function [e] = MSXerror(Errcode,MSXLibEPANET)
len=80;
errstring=char(32*ones(1,len+1));
[e,errstring] = calllib(MSXLibEPANET,'MSXgeterror',Errcode,errstring,len);
disp(errstring);
end
function [Errcode, count] = MSXgetcount(code,MSXLibEPANET)
count=0;
[Errcode,count] = calllib(MSXLibEPANET,'MSXgetcount',code,count);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode, index] = MSXgetindex(MSXLibEPANET,varargin)
index =0;
if ~isnumeric(varargin{1})
    varargin{1}=varargin{2};
    varargin{2}=varargin{3};
end
[Errcode,~,index]=calllib(MSXLibEPANET,'MSXgetindex',varargin{1},varargin{2},index);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode, id] = MSXgetID(type,index,len,MSXLibEPANET)
id=char(32*ones(1,len+1));
[Errcode,id]=calllib(MSXLibEPANET,'MSXgetID',type,index,id,len);
id=id(1:len);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode, len] = MSXgetIDlen(type,index,MSXLibEPANET)
len=0;
[Errcode,len]=calllib(MSXLibEPANET,'MSXgetIDlen',type,index,len);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode, type, units, atol, rtol] = MSXgetspecies(index,MSXLibEPANET)
type=0; rtol=0; atol=0;
units=char(32*ones(1,16));
[Errcode,type,units,atol,rtol]=calllib(MSXLibEPANET,'MSXgetspecies',index,type,units,atol,rtol);
switch type
    case 0
        type='BULK';   % for a bulk water species
    case 1
        type='WALL';   % for a pipe wall surface species
end
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode, value] = MSXgetconstant(index,MSXLibEPANET)
value=0;
[Errcode,value]=calllib(MSXLibEPANET,'MSXgetconstant',index,value);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode, value] = MSXgetparameter(type,index,param,MSXLibEPANET)
value=0;
[Errcode,value]=calllib(MSXLibEPANET,'MSXgetparameter',type,index,param,value);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode, patlen] = MSXgetpatternlen(patindex,MSXLibEPANET)
patlen=0;
[Errcode,patlen]=calllib(MSXLibEPANET,'MSXgetpatternlen',patindex,patlen);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode, value] = MSXgetpatternvalue(patindex,period,MSXLibEPANET)
value=0;
[Errcode,value]=calllib(MSXLibEPANET,'MSXgetpatternvalue',patindex,period,value);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode, value] = MSXgetinitqual(obj,index,species,MSXLibEPANET)
value=0;
[Errcode,value]=calllib(MSXLibEPANET,'MSXgetinitqual',obj,index,species,value);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode, type, level, pat] = MSXgetsource(node,species,MSXLibEPANET)
type=0;
level=0;
pat=0;
[Errcode,type,level,pat]=calllib(MSXLibEPANET,'MSXgetsource',node,species,type,level,pat);
switch type     % type codes
    case -1
        type='NOSOURCE';  % for no source
    case 0
        type='CONCEN';    % for a concentration source
    case 1
        type='MASS';      % for a mass booster source
    case 2
        type='SETPOINT';  % for a setpoint source
    case 3
        type='FLOWPACED'; % for a flow paced source
end
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function MSXMatlabCleanup(obj)
% Unload library
if libisloaded(obj.MSXLibEPANET)
    unloadlibrary(obj.MSXLibEPANET);
else
    errstring =['Library ', obj.MSXLibEPANET, '.dll was not loaded'];
    disp(errstring);
end
end
function [Errcode] = MSXsaveoutfile(outfname,MSXLibEPANET)
[Errcode] = calllib(MSXLibEPANET,'MSXsaveoutfile',outfname);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode] = MSXsavemsxfile(msxname,MSXLibEPANET)
[Errcode] = calllib(MSXLibEPANET,'MSXsavemsxfile',msxname);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode] = MSXsetconstant(index, value, MSXLibEPANET)
[Errcode]=calllib(MSXLibEPANET,'MSXsetconstant',index,value);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode] = MSXsetparameter(type, index, param, value, MSXLibEPANET)
[Errcode]=calllib(MSXLibEPANET,'MSXsetparameter',type,index,param,value);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode] = MSXsetinitqual(type,index,species,value,MSXLibEPANET)
[Errcode]=calllib(MSXLibEPANET,'MSXsetinitqual',type,index,species,value);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode] = MSXsetpattern(index, factors, nfactors, MSXLibEPANET)
[Errcode]=calllib(MSXLibEPANET,'MSXsetpattern',index,factors,nfactors);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode] = MSXsetpatternvalue(pat, period, value,MSXLibEPANET)
[Errcode]=calllib(MSXLibEPANET,'MSXsetpatternvalue',pat,period,value);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode] = MSXsolveQ(MSXLibEPANET)
[Errcode]=calllib(MSXLibEPANET,'MSXsolveQ');
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode] = MSXsolveH(MSXLibEPANET)
[Errcode]=calllib(MSXLibEPANET,'MSXsolveH');
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode] = MSXaddpattern(patid,MSXLibEPANET)
[Errcode]=calllib(MSXLibEPANET,'MSXaddpattern',patid);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode] = MSXusehydfile(hydfname,MSXLibEPANET)
[Errcode]=calllib(MSXLibEPANET,'MSXusehydfile',hydfname);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode, t, tleft] = MSXstep(MSXLibEPANET)
t=int32(0);
tleft=int32(0);
[Errcode,t,tleft]=calllib(MSXLibEPANET,'MSXstep',t,tleft);
t = double(t);
tleft = double(tleft);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode] = MSXinit(flag,MSXLibEPANET)
[Errcode]=calllib(MSXLibEPANET,'MSXinit',flag);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode] = MSXreport(MSXLibEPANET)
[Errcode] = calllib(MSXLibEPANET,'MSXreport');
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [e, errmsg] = MSXgeterror(Errcode,MSXLibEPANET)
errmsg = char(32*ones(1,80));
[e,errmsg] = calllib(MSXLibEPANET,'MSXgeterror',Errcode,errmsg,80);
if e
    MSXerror(e);
end
end
function [Errcode, value] = MSXgetqual(type, index, species,MSXLibEPANET)
value=0;
[Errcode,value]=calllib(MSXLibEPANET,'MSXgetqual',type,index,species,value);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Errcode] = MSXsetsource(node,species,type,level,pat,MSXLibEPANET)
[Errcode]=calllib(MSXLibEPANET,'MSXsetsource',node,species,type,level,pat);
if Errcode
    MSXerror(Errcode,MSXLibEPANET);
end
end
function [Terms,Pipes,Tanks] = getEquations(msxname)
% Open epanet input file
[fid,message]=fopen(msxname,'rt');
if fid < 0
    disp(message)
    return
end

Terms={};
Pipes={};
Tanks={};

sect=0; i=1; t=1; k=1;
% Read each line from msx file.
while 1
    tline = fgetl(fid);
    if ~ischar(tline),   break,   end
    
    % Get first token in the line
    tok = strtok(tline);
    
    % Skip blank Clines and comments
    if isempty(tok), continue, end
    if (tok(1) == ';'), continue, end
    
    if (tok(1) == '[')
        % [TERMS] section
        if strcmpi(tok(1:5),'[TERM')
            sect = 1;
            continue;
            % [PIPES] section
        elseif strcmpi(tok(1:5),'[PIPE')
            sect = 2;
            continue;
            % [TANKS]
        elseif strcmpi(tok(1:5),'[TANK')
            sect = 3;
            continue;
            % [END]
        elseif strcmpi(tok(1:4),'[END')
            break;
        else
            sect = 0;
            continue;
        end
    end
    
    if sect == 0
        continue;
        
        % Terms
    elseif sect == 1
        Terms{i} = tline;
        i=i+1;
        % Pipes
    elseif sect == 2
        Pipes{t} = tline;
        t=t+1;
        % Tanks
    elseif sect == 3
        Tanks{k} = tline;
        k=k+1;
    end
    %
end
fclose(fid);
end
function value=getMSXOptions(msxname)

if isempty(msxname)
    warning('Please load MSX File.');
    return;
end
% Open epanet input file
[fid,message] = fopen(msxname,'rt');
if fid < 0
    disp(message)
    return
end
% DEFAULT OPTIONS
value.areaunits='FT2'; 
value.rateunits='HR';
value.solver='EUL';
value.timestep=300;
value.atol=0.01;
value.rtol=0.001;
value.coupling='NONE';
value.compiler='NONE';
sect=0;
while 1
    tline = fgetl(fid);
    if ~ischar(tline),   break,   end
    % Get first token in the line
    tok = strtok(tline);
    % Skip blank Clines and comments
    if isempty(tok), continue, end
    if (tok(1) == ';'), continue, end
    if (tok(1) == '[')
        % [OPTIONS] section
        if strcmpi(tok(1:5),'[OPTI')
            sect=1;
            continue;
            % [END]
        elseif strcmpi(tok(1:4),'[REP')
            break;
        else
            sect = 0;
            continue;
        end
    end
    
    if sect == 0
        continue;
        
        % Options
    elseif sect == 1
        atline={};
        atline = checktlines(tline);
        if strcmpi(atline{1},'TIMESTEP')
            value.timestep=str2num(atline{2});%return;
        elseif strcmpi(atline{1},'AREA_UNITS')
            value.areaunits=atline{2};%return;
        elseif strcmpi(atline{1},'RATE_UNITS')
            value.rateunits=atline{2};%return;
        elseif strcmpi(atline{1},'SOLVER')
            value.solver=atline{2};%return;
        elseif strcmpi(atline{1},'RTOL')
            value.rtol=str2num(atline{2});%return; 
        elseif strcmpi(atline{1},'ATOL')
            value.atol=str2num(atline{2});%return;   
        elseif strcmpi(atline{1},'COUPLING')
            value.coupling=atline{2};%return;    
        elseif strcmpi(atline{1},'COMPILER')
            value.compiler=atline{2};%return;
        end
    end
end
fclose(fid);
end
function [axesid] = ENplot(obj,varargin)
% Initiality
highlightnode=0;
highlightlink=0;
highlightnodeindex=[];
highlightlinkindex=[];
legendIndices=[];
l=zeros(1,6);
Node=char('no');
Link=char('no');
NodeInd=0;
LinkInd=0;
fontsize=10;
selectColorNode={''};
selectColorLink={''};
axesid=0;
lline='yes';
npoint='yes';
for i=1:(nargin/2)
    argument =lower(varargin{2*(i-1)+1});
    switch argument
        case 'nodes' % Nodes
            if ~strcmpi(varargin{2*i},'yes') && ~strcmpi(varargin{2*i},'no')
                warning('Invalid argument.');
                return
            end
            Node=varargin{2*i};
        case 'links' % Nodes
            if ~strcmpi(varargin{2*i},'yes') && ~strcmpi(varargin{2*i},'no')
                warning('Invalid argument.');
                return
            end
            Link=varargin{2*i};
        case 'nodesindex' % Nodes
            if ~strcmpi(varargin{2*i},'yes') 
                warning('Invalid argument.');
                return
            end
            NodeInd=varargin{2*i};
        case 'linksindex' % Links
            if ~strcmpi(varargin{2*i},'yes')
                warning('Invalid argument.');
                return
            end
            LinkInd=varargin{2*i};
        case 'highlightnode' % Highlight Node
            highlightnode=varargin{2*i};
        case 'highlightlink' % Highlight Link
            highlightlink=varargin{2*i};
        case 'fontsize' % font size
            fontsize=varargin{2*i};
        case 'colornode' % color
            selectColorNode=varargin{2*i};
        case 'colorlink' % color
            selectColorLink=varargin{2*i};        
        case 'point' % color
            if ~strcmpi(varargin{2*i},'yes') && ~strcmpi(varargin{2*i},'no')
                warning('Invalid argument.');
                return
            end
            npoint=varargin{2*i};
        case 'line' % color
            if ~strcmpi(varargin{2*i},'yes') && ~strcmpi(varargin{2*i},'no')
                warning('Invalid argument.');
                return
            end
            lline=varargin{2*i};
        case 'axes' % color
            try
                axesid=axes('Parent',varargin{2*i});
            catch e
                axesid=varargin{2*i};
            end
        case 'bin' % color
            bin=varargin{2*i};
        otherwise
            warning('Invalid property founobj.');
            return
    end
end
drawnow;

if axesid==0
   g=figure;
   axesid=axes('Parent',g);
end

if cellfun('isempty',selectColorNode)==1
    init={'r'};
    for i=1:length(highlightnode)
        selectColorNode=[init selectColorNode];
    end
end
if cellfun('isempty',selectColorLink)==1
    init={'r'};
    for i=1:length(highlightlink)
        selectColorLink=[init selectColorLink];
    end
end

% get info BIN function
if bin==1
    b=obj.getBinLinksInfo;
    v.linknameid=b.BinLinkNameID;
    v.linkcount=b.BinLinkCount;
    v.linkfromnode=b.BinLinkFromNode;
    v.linktonode=b.BinLinkToNode;
    v.linkindex=b.BinLinkIndex;
    v.pumpindex=b.BinLinkPumpIndex;
    v.valveindex=b.BinLinkValveIndex;
    v.nodesconnlinks = [v.linkfromnode;v.linktonode]';
    b=obj.getBinNodesInfo;
    v.nodenameid=b.BinNodeNameID;
    v.nodecoords=obj.getBinNodeCoordinates;
    v.nodecount=b.BinNodeCount;
    v.nodeindex=b.BinNodeIndex;
    v.resindex=b.BinNodeReservoirIndex;
    v.tankindex=b.BinNodeTankIndex;
elseif bin==0
    % get info EN functions
    v.nodenameid=obj.getNodeNameID;
    v.linknameid=obj.getLinkNameID;
    v.nodesconnlinks=obj.getNodesConnectingLinksID;
    chckfunctions=libfunctions(obj.LibEPANET);
    if sum(strcmp(chckfunctions,'ENgetcoord'))
        v.nodecoords=obj.getNodeCoordinates;
    else
        v.nodecoords=obj.getBinNodeCoordinates;
    end
    v.pumpindex=obj.getLinkPumpIndex;
    v.valveindex=obj.getLinkValveIndex;
    v.resindex=obj.getNodeReservoirIndex;
    v.tankindex=obj.getNodeTankIndex;
    v.linkcount=obj.getLinkCount;
    v.nodecount=obj.getNodeCount;
    v.linkindex=obj.getLinkIndex;
    v.nodeindex=obj.getNodeIndex;
end

if isnan(v.nodecoords{1}(2))
   warning('Do not exist coordinates.'); close(g);
   return
end
% Get node names and x, y coordiantes
if isa(highlightnode,'cell')
    for i=1:length(highlightnode)
        n = strcmp(v.nodenameid,highlightnode{i});
        if sum(n)==0
            warning('Undefined node with id "%s" in function call therefore the index is zero.', char(highlightnode{i}));
        else
            highlightnodeindex(i) = strfind(n,1);
        end
    end
end

if isa(highlightlink,'cell')
    for i=1:length(highlightlink)
        n = strcmp(v.linknameid,highlightlink{i});
        if sum(n)==0
            warning('Undefined link with id "%s" in function call therefore the index is zero.', char(highlightlink{i}));
        else
            highlightlinkindex(i) = strfind(n,1);
        end
    end
end

if (strcmpi(lline,'yes'))
    hold on;
    for i=1:v.linkcount
        FromNode=strfind(strcmp(v.nodesconnlinks(i,1),v.nodenameid),1);
        ToNode=strfind(strcmp(v.nodesconnlinks(i,2),v.nodenameid),1);

        if FromNode
            x1 = double(v.nodecoords{1}(FromNode));
            y1 = double(v.nodecoords{2}(FromNode));
        end
        if ToNode
            x2 = double(v.nodecoords{1}(ToNode));
            y2 = double(v.nodecoords{2}(ToNode));
        end

        hh=strfind(highlightlinkindex,i);

        if length(hh) && ~isempty(selectColorLink)
            line([x1 v.nodecoords{3}{i} x2],[y1 v.nodecoords{4}{i} y2],'LineWidth',1,'Color',[.5 .5 .5],'Parent',axesid);
        end
        if ~length(hh)
            h(:,1)=line([x1 v.nodecoords{3}{i} x2],[y1 v.nodecoords{4}{i} y2],'LineWidth',1,'Parent',axesid);
            if ~l(1), legendIndices = [legendIndices 1]; l(1)=1; end
        end
            
        % Plot Pumps
        if sum(strfind(v.pumpindex,i))
            colornode = 'm';
            if length(hh) && isempty(selectColorLink)
                colornode = 'r';
            end
            h(:,2)=plot((x1+x2)/2,(y1+y2)/2,'mv','LineWidth',2,'MarkerEdgeColor','m',...
                'MarkerFaceColor','m',...
                'MarkerSize',5,'Parent',axesid);
            if ~l(2), legendIndices = [legendIndices 2]; l(2)=1; end
            plot((x1+x2)/2,(y1+y2)/2,'mv','LineWidth',2,'MarkerEdgeColor',colornode,...
                'MarkerFaceColor',colornode,...
                'MarkerSize',5,'Parent',axesid);
        end

        % Plot Valves
        if sum(strfind(v.valveindex,i))
            colornode = 'k';
            if length(hh) && isempty(selectColorLink)
                colornode = 'r';
            end
            h(:,3)=plot((x1+x2)/2,(y1+y2)/2,'k*','LineWidth',2,'MarkerEdgeColor',colornode,...
                'MarkerFaceColor',colornode,'MarkerSize',7,'Parent',axesid);         
            if ~l(3), legendIndices = [legendIndices 3]; l(3)=1; end
        end

        if length(hh) && isempty(selectColorLink)
            line([x1,x2],[y1,y2],'LineWidth',1,'Color','r','Parent',axesid);
            text((x1+x2)/2,(y1+y2)/2,v.linknameid(i),'Fontsize',fontsize,'Parent',axesid);
        elseif length(hh) && ~isempty(selectColorLink)
            try tt=length(selectColorLink{hh}); catch; tt=2; end
           if tt>1
                if length(selectColorLink(hh))==1
                    nm{1}=selectColorLink(hh);
                else
                    nm=selectColorLink(hh);
                end
                if iscell(nm{1}) 
                    line([x1 v.nodecoords{3}{i} x2],[y1 v.nodecoords{4}{i} y2],'LineWidth',1,'Color',nm{1}{1},'Parent',axesid);
                else
                    line([x1 v.nodecoords{3}{i} x2],[y1 v.nodecoords{4}{i} y2],'LineWidth',1,'Color',nm{1},'Parent',axesid);
                end
            else
                line([x1 v.nodecoords{3}{i} x2],[y1 v.nodecoords{4}{i} y2],'LineWidth',1,'Color',char(selectColorLink(hh)),'Parent',axesid);
            end
        end
        % Show Link id
        if (strcmpi(Link,'yes')) %&& ~length(hh))
            text((x1+x2)/2,(y1+y2)/2,v.linknameid(i),'Fontsize',fontsize,'Parent',axesid);
        end
        % Show Link Index
        if (strcmpi(LinkInd,'yes')) %&& ~length(hh))
            text((x1+x2)/2,(y1+y2)/2,num2str(v.linkindex(i)),'Fontsize',fontsize,'Parent',axesid);
        end
    end
end

if (strcmpi(npoint,'yes'))
    % Coordinates for node FROM
    hold on;
    for i=1:v.nodecount
        [x] = double(v.nodecoords{1}(i));
        [y] = double(v.nodecoords{2}(i));

        hh=strfind(highlightnodeindex,i);
        if ~length(hh)
            h(:,4)=plot(x, y,'o','LineWidth',2,'MarkerEdgeColor','b',...
            'MarkerFaceColor','b',...
            'MarkerSize',5,'Parent',axesid);
            if ~l(4), legendIndices = [legendIndices 4]; l(4)=1; end
        end

        % Plot Reservoirs
        if sum(strfind(v.resindex,i))
            colornode = 'g';
            if length(hh) && isempty(selectColorNode)
                colornode = 'r';
            end
            h(:,5)=plot(x,y,'s','LineWidth',2,'MarkerEdgeColor','g',...
                'MarkerFaceColor','g',...
                'MarkerSize',13,'Parent',axesid);
            if ~l(5), legendIndices = [legendIndices 5]; l(5)=1; end
            plot(x,y,'s','LineWidth',2,'MarkerEdgeColor', colornode,...
                'MarkerFaceColor', colornode,...
                'MarkerSize',13,'Parent',axesid);
        end
        % Plot Tanks
        if sum(strfind(v.tankindex,i))
            colornode='c';
            if length(hh) && isempty(selectColorNode)
                colornode='r';
            elseif length(hh) && ~isempty(selectColorNode)
                colornode= 'c';
            end
            h(:,6)=plot(x,y,'p','LineWidth',2,'MarkerEdgeColor','c',...
                'MarkerFaceColor','c',...
                'MarkerSize',16,'Parent',axesid);
            if ~l(6), legendIndices = [legendIndices 6]; l(6)=1; end

            plot(x,y,'p','LineWidth',2,'MarkerEdgeColor',colornode,...
                'MarkerFaceColor',colornode,...
                'MarkerSize',16,'Parent',axesid);
        end

        if length(hh) && isempty(selectColorNode)
            plot(x, y,'o','LineWidth',2,'MarkerEdgeColor','r',...
                'MarkerFaceColor','r',...
                'MarkerSize',5,'Parent',axesid);
            text(x,y,v.nodenameid(i),'Fontsize',fontsize,'Parent',axesid)%'BackgroundColor',[.7 .9 .7],'Margin',margin/4);
        elseif length(hh) && ~isempty(selectColorNode)
            try tt=length(selectColorNode{hh}); catch, tt=2; end
           if tt>1
                if length(selectColorNode(hh))==1
                    nm{1}=selectColorNode(hh);
                    nmplot=nm{1}{1};
                else
                    nm=selectColorNode(hh);
                    nmplot=nm{1};
                end
                if iscell(nm{1}) 
                    plot(x, y,'o','LineWidth',2,'MarkerEdgeColor',nmplot,'MarkerFaceColor',nmplot,'MarkerSize',5,'Parent',axesid);
                else
                    plot(x, y,'o','LineWidth',2,'MarkerEdgeColor',nmplot,'MarkerFaceColor',nmplot,'MarkerSize',5,'Parent',axesid);
                end
                if sum(find(i==v.resindex))
                   plot(x,y,'s','LineWidth',2,'MarkerEdgeColor', nmplot,...
                   'MarkerFaceColor', nmplot,...
                   'MarkerSize',13,'Parent',axesid);
                end
                if sum(find(i==v.tankindex))
                   plot(x,y,'p','LineWidth',2,'MarkerEdgeColor',nmplot,...
                   'MarkerFaceColor',nmplot,...
                   'MarkerSize',16,'Parent',axesid);
                end
           else
                nmplot=char(selectColorNode(hh));
                plot(x, y,'o','LineWidth',2,'MarkerEdgeColor',nmplot,'MarkerFaceColor',nmplot,...
                    'MarkerSize',5,'Parent',axesid);
                if sum(find(i==v.resindex))
                   plot(x,y,'s','LineWidth',2,'MarkerEdgeColor', nmplot,...
                   'MarkerFaceColor', nmplot,...
                   'MarkerSize',13,'Parent',axesid);
                end
                if sum(find(i==v.tankindex))
                   plot(x,y,'p','LineWidth',2,'MarkerEdgeColor',nmplot,...
                   'MarkerFaceColor',nmplot,...
                   'MarkerSize',16,'Parent',axesid);
                end
           end
        end
        % Show Node id
        if (strcmpi(Node,'yes')) %&& ~length(hh))
            text(x,y,v.nodenameid(i),'Fontsize',fontsize);%'BackgroundColor',[.7 .9 .7],'Margin',margin/4);
        end
        % Show Node index
        if (strcmpi(NodeInd,'yes')) %&& ~length(hh))
            text(x,y,num2str(v.nodeindex(i)),'Fontsize',fontsize,'Parent',axesid);%'BackgroundColor',[.7 .9 .7],'Margin',margin/4);
        end
    end
end
    
% Legend Plots
if isempty(highlightnodeindex) || isempty(highlightnodeindex)
    legendString={'Pipes','Pumps','Valves',...
        'Junctions','Reservoirs','Tanks'}; 
    legendIndices=sort(legendIndices,'descend');
    legend(h(legendIndices),legendString(legendIndices));
end
% Axis OFF and se Background
[xmax,~]=max(v.nodecoords{1});
[xmin,~]=min(v.nodecoords{1});
[ymax,~]=max(v.nodecoords{2});
[ymin,~]=min(v.nodecoords{2});

if ~isnan(ymax)
    if ymax==ymin
        xlim([xmin-((xmax-xmin)*.1),xmax+((xmax-xmin)*.1)]);
        ylim([ymin-.1,ymax+.1]);
    elseif xmax==xmin
        xlim([xmin-.1,xmax+.1]);
        ylim([ymin-(ymax-ymin)*.1,ymax+(ymax-ymin)*.1]);
    else
        xlim([xmin-((xmax-xmin)*.1),xmax+((xmax-xmin)*.1)]);
        ylim([ymin-(ymax-ymin)*.1,ymax+(ymax-ymin)*.1]);
    end
else
    warning('Undefined coordinates.');
end
axis off
whitebg('w');
set(axesid,'position',[0 0 1 1],'units','normalized');
end
function [info,tline,allines] = readAllFile(inpname)
    fid = fopen(inpname, 'rt');%or msxname
    allines = textscan(fid, '%s', 'delimiter', '\n');
    [tline]=regexp( fileread(inpname), '\n', 'split');
    for i=1:length(tline)
        str=regexp( tline{i}, '\s', 'split');
        info{i} = str(~cellfun('isempty', str));
    end
    fclose(fid);
end
function [Errcode,value] = limitingPotential(obj,param, varargin)
    [tlines]=regexp( fileread(obj.BinTempfile), '\n', 'split');
    Errcode=0;value=0;
    if strcmp(param,'get')
        for i=1:length(tlines)
           tmp{i}=regexp(tlines{i}, '\s*', 'split');
           atlines=tmp{i};
           atlines(strcmp('',atlines)) = [];
           newlines{i}=tlines{i};
           if ~isempty(atlines)
               if strcmpi(atlines{1},'limiting')
                   value = str2num(atlines{3});return;
               end
           end
        end
    else
        fid = writenewTemp(obj.BinTempfile);
        for i=1:length(tlines)
           tmp{i}=regexp(tlines{i}, '\s*', 'split');
           atlines=tmp{i};
           atlines(strcmp('',atlines)) = [];
           newlines{i}=tlines{i};
           getLimit = obj.getBinLimitingPotential;
           if length(atlines)==3 && isempty(getLimit)
               if strcmpi(atlines{1},'global') && strcmpi(atlines{2},'wall')
                  index=i;
                  newlines{i}=tlines{i};
                  newlines{i+1}=['Limiting',blanks(3),'Potential',blanks(3),num2str(varargin{1})];
                  break;
              end
           end   
        end
        if isempty(getLimit)
            for i=index+2:length(tlines)+1
                newlines{i}=tlines{i-1};
            end
            fprintf(fid, '%s\n', newlines{:});  
            if obj.Bin==1
                Errcode=closeOpenNetwork(obj);
            end 
        else
            fprintf(fid, '%s\n', tlines{:});
        end
        fclose(fid);
    end
end
function [Errcode]=setBinParam(obj,indexParameter,parameter,sections,varargin)
    ok=0;Errcode=0;
    if ~isempty(parameter) && (strcmpi(sections{1},'[SOURCES]')) && indexParameter==11
        indices=find(parameter.BinNodeSourceQuality>-1);
        sources=obj.getBinNodeNameID.BinNodeNameID(indices);ok=1;
    end
    if strcmp(sections{1},'[PATTERNS]')
        if ischar(indexParameter)
            param=indexParameter;
            indexParameter=21;
            pat=obj.getBinPatternsInfo;
        end
    end
    [tlines]=regexp( fileread([obj.BinTempfile]), '\n', 'split');
    cntIDpat=0;start=0;stop1=0;stop11=0;itsOkQual=0;stop2=0;stop22=0;
    for i=1:length(tlines)
        tt=regexp(tlines{i}, '\s*', 'split');
        if strcmp(tt{1},sections{1})
            start=i;
        end
        if ~strcmp(sections{1},'[REACTIONS]')
            if strcmp(tt{1},sections{2})
                stop=i;
            end
        else
            if strcmp(tt{1},'[MIXING]')
                stop1=i;
            end
            if strcmp(tt{1},'[ENERGY]')
                stop11=i;
            end
            stop=max([stop1 stop11]);
        end
        cnts=obj.BinLinkPipeCount;
        if length(sections)>2
            if strcmp(tt{1},sections{3})
                start2=i;
            end
            if strcmp(tt{1},sections{5})
                stop2=i;
            elseif strcmp(tt{1},sections{4})
                stop22=i;
            end
            stop_2=max([stop2 stop22]);
            cnts=obj.BinNodeJunctionCount;
        end
    end
    if strcmpi(sections{1},'[RESERVOIRS]')
        cnts=obj.BinNodeReservoirCount;
    elseif strcmpi(sections{1},'[TANKS]')
        cnts=obj.BinNodeTankCount;
    end
    fid = writenewTemp(obj.BinTempfile);
    ll=1;
    for i=start:stop
       % Get first token in the line
       tok = strtok(tlines{i});
       if isempty(tok), continue; end
       % Skip blank Clines and comments
       if strcmp(tok(1),';') && ok==0
       elseif sum(tlines{i}=='[') && ok==0
       elseif isempty(tok) && ok==0
       % skip
       else
           clear atlines;
           atlines = checktlines(tlines{i});
           if ll<cnts+1
               if (~isempty(parameter) && indexParameter~=3 && length(sections)<3 || indexParameter==2) && (~strcmpi(sections{1},'[SOURCES]')) && (~strcmpi(sections{1},'[REACTIONS]')) && (~strcmpi(sections{1},'[TIMES]')) && (~strcmpi(sections{1},'[OPTIONS]')) && (~strcmpi(sections{1},'[PATTERNS]')) && ~strcmpi(sections{1},'[TANKS]')
                   if indexParameter ~= 8  
                       atlines{indexParameter} = num2str(parameter(ll));  
                   else
                       atlines{indexParameter} = num2str(parameter{ll});  
                   end
                   newlines=[];
                   for pp=1:length(atlines)
                       newlines = [newlines, atlines{pp},blanks(10)];
                   end
                   tlines{i}=newlines;
               end
               if (~isempty(parameter) && length(atlines)>2 && indexParameter ~= 8) && (~strcmpi(sections{1},'[SOURCES]')) && (~strcmpi(sections{1},'[PATTERNS]')) && (~strcmpi(sections{1},'[REACTIONS]')) && (~strcmpi(sections{1},'[TIMES]')) && (~strcmpi(sections{1},'[OPTIONS]')) && ~strcmpi(sections{1},'[TANKS]')
                   if length(atlines)<indexParameter, atlines{indexParameter}={''}; end
                   if ~isempty(atlines{indexParameter}) && ~sum(atlines{3}==';')
                       if indexParameter==4 && length(sections)>2
                          atlines{indexParameter} = num2str(parameter{ll});  
                       else
                          atlines{indexParameter} = num2str(parameter(ll));  
                       end
                       newlines=[];
                       for pp=1:length(atlines)
                           newlines = [newlines, atlines{pp},blanks(10)];
                       end
                       tlines{i}=newlines;
                   end
               end
               if ~isempty(parameter) && (strcmpi(sections{1},'[RESERVOIRS]') || strcmpi(sections{1},'[TANKS]')) && (~strcmpi(sections{1},'[SOURCES]')) && (~strcmpi(sections{1},'[TIMES]')) && (~strcmpi(sections{1},'[OPTIONS]')) && (~strcmpi(sections{1},'[PATTERNS]')) 
                   if (indexParameter==2 && strcmpi(sections{1},'[RESERVOIRS]')) || strcmpi(sections{1},'[TANKS]')
                      atlines{indexParameter} = num2str(parameter(ll)); 
                   elseif strcmpi(sections{1},'[RESERVOIRS]')
                      atlines{indexParameter} = num2str(parameter{ll}); 
                   end
                   newlines=[];
                   for pp=1:length(atlines)
                       newlines = [newlines, atlines{pp},blanks(10)];
                   end
                   tlines{i}=newlines;
               end
           end
           if ~isempty(parameter) && (strcmpi(sections{1},'[REACTIONS]')) && (~strcmpi(sections{1},'[SOURCES]')) && (~strcmpi(sections{1},'[TIMES]')) && (~strcmpi(sections{1},'[OPTIONS]')) && (~strcmpi(sections{1},'[PATTERNS]')) 
               if strcmpi(atlines{1},'global') 
                  if strcmpi(atlines{2},'bulk') && indexParameter==1
                     atlines{3} = num2str(parameter);
                  end
                  if strcmpi(atlines{2},'wall') && indexParameter==3
                     atlines{3} = num2str(parameter);
                  end
               end
               newlines=[];
               for pp=1:length(atlines)
                   newlines = [newlines, atlines{pp},blanks(10)];
               end
               tlines{i}=newlines;
           end
           mins=1;
           if ~isempty(parameter) && (strcmpi(sections{1},'[TIMES]')) && (~strcmpi(sections{1},'[SOURCES]')) && (~strcmpi(sections{1},'[OPTIONS]')) && (~strcmpi(sections{1},'[PATTERNS]')) 
               if strcmpi(atlines{1},'DURATION') && indexParameter==1 
                    [mm,mins]=sec2hrs(parameter);
                    atlines{2} = num2str(mm);
               elseif strcmpi(atlines{1},'HYDRAULIC') && indexParameter==2
                    [mm,mins]=sec2hrs(parameter);
                    atlines{3} = num2str(mm);
               elseif strcmpi(atlines{1},'QUALITY') && indexParameter==3 && ~strcmpi(atlines{2},'TRACE')
                    [mm,mins]=sec2hrs(parameter);
                    atlines{3} = num2str(mm);
               elseif strcmpi(atlines{1},'PATTERN') && strcmpi(atlines{2},'TIMESTEP') && indexParameter==4
                    [mm,mins]=sec2hrs(parameter);
                    atlines{3} = num2str(mm);
               elseif strcmpi(atlines{1},'PATTERN') && strcmpi(atlines{2},'START') && indexParameter==5
                    [mm,mins]=sec2hrs(parameter);
                    atlines{3} = num2str(mm);
               elseif strcmpi(atlines{1},'REPORT') && strcmpi(atlines{2},'TIMESTEP') && indexParameter==6
                    [mm,mins]=sec2hrs(parameter);
                    atlines{3} = num2str(mm);
               elseif strcmpi(atlines{1},'REPORT') && strcmpi(atlines{2},'START') && indexParameter==7
                    [mm,mins]=sec2hrs(parameter);
                    atlines{3} = num2str(mm);
               elseif strcmpi(atlines{1},'STATISTIC') && indexParameter==8
                   atlines{2} = parameter;
               end
               if mins==0 && length(atlines)>3
                   atlines{4}='';
               end
                   newlines=[];
               for pp=1:length(atlines)
                   newlines = [newlines, atlines{pp},blanks(10)];
               end
               tlines{i}=newlines;
           end    
           if ~isempty(parameter) && (strcmpi(sections{1},'[OPTIONS]')) && (~strcmpi(sections{1},'[SOURCES]')) && (~strcmpi(sections{1},'[PATTERNS]')) 
               if strcmpi(atlines{1},'QUALITY') && indexParameter==1 && itsOkQual==0
                   clear atlines;
                   atlines{1}=parameter;itsOkQual=1;
               end
               newlines=[];
               for pp=1:length(atlines)
                   newlines = [newlines, atlines{pp},blanks(10)];
               end
               tlines{i}=newlines;
           end
           if ~isempty(parameter) && (strcmpi(sections{1},'[PATTERNS]')) && (~strcmpi(sections{1},'[SOURCES]'))
               idpat=param;
               if strcmp(atlines{1},idpat) && cntIDpat==0
                   atlines=[idpat blanks(12)];
                   cntIDpat=1;
                   newlines=atlines;
                   zz=0;lll=0;
                   lengthparam=length(parameter);
                   mlen=pat.BinPatternValue(find(strcmp(idpat,pat.BinPatternNameID)));
                   if lengthparam<length(mlen{1})
                       for j=(lengthparam+1):length(mlen{1})
                           parameter(1,j)=parameter(1,j-lengthparam);
                       end
                   end
                   for pp=1:size(parameter,1)
                       if mod(lengthparam,6)==0
                           zz=zz+lengthparam/6;
                       else
                           zz=zz+1;
                           if mod(lengthparam,6)
                               zz=zz+1;
                           end
                       end
                       m=1;
                       for k=lll+1:zz
                           if mod(lengthparam,6) && k==zz
                               newlines = [idpat blanks(15) num2str(parameter(m:end))];
                           else
                               newlines = [idpat blanks(15) num2str(parameter(m:m+6-1))];
                           end                           
                           m=m+6;
                           tlines{i+k-1}=newlines;
                       end
                       lll=zz;
                   end                   
               elseif cntIDpat==1
                   if strcmp(atlines{1},idpat)
                       newlines='';
                   else
                   newlines=[atlines{1} blanks(12)];
                   cntIDpat=1;
                   for pp=2:length(atlines)
                       newlines = [newlines, num2str(atlines{pp}),blanks(12)];
                   end
                   end
               else 
                   newlines=tlines{i};
               end
               if isempty(parameter) && (~strcmpi(sections{1},'[PATTERNS]')) && (strcmpi(sections{1},'[SOURCES]'))
                  tlines{i}=newlines;
               end
           end
           if ~isempty(parameter) && (strcmpi(sections{1},'[SOURCES]')) && indexParameter==11
               for kk=start+1:stop-1
                  tlines{kk}=''; 
               end
               for u=1:start
                   nnlines{u}=tlines{u};
               end
               for u=start+1:start+1+length(sources)
                   nnlines{u}=[];
               end
               for k=start+1:length(tlines)
                   nnlines{u}=tlines{k};
                   u=u+1;
               end
               tlines=nnlines;clear nnlines;
               for u=1:length(sources)
                   if sum(strcmp(sources,atlines{1})) || ok==1
                       atlines{1}=sources{u};
                       atlines{2}=parameter.BinNodeSourceType{indices(u)};
                       if length(atlines)>2 || ok==1
                           atlines{3}=num2str(parameter.BinNodeSourceQuality(indices(u)));
                       end
                       if length(atlines)>3 || ok==1
                           atlines{4}=parameter.BinNodeSourcePatternNameID{indices(u)};
                       end
                       newlines=[atlines{1} blanks(10)];
                       for pp=2:length(atlines)
                           newlines = [newlines, atlines{pp},blanks(10)];
                       end
                       tlines{i+u}=newlines;
                   end
               end
               indexParameter=0;break;
           end
           ll=ll+1;
        end
    end
    if length(sections)>2
       ll=1;newInd=indexParameter-1;
       for i=start2:stop_2
           % Get first token in the line
           tok = strtok(tlines{i});
           % Skip blank Clines and comments
           if isempty(tok), continue; end
           if strcmp(tok(1),';')
           elseif sum(tlines{i}=='[')
           elseif isempty(tok)
           % skip
           else
               clear atlines;
               atlines = checktlines(tlines{i});
               if ~isempty(parameter) && length(atlines)>1 && indexParameter~=2%BaseDemands
                   if ~length(strfind(cell2mat(atlines),';')) %~isempty(atlines{3}) && 
                       if length(parameter)<ll, continue; end
                       if newInd==3
                          atlines{newInd} = num2str(parameter{ll});  
                       else
                          atlines{newInd} = num2str(parameter(ll));  
                       end
                       newlines=[];
                       for pp=1:length(atlines)
                           newlines = [newlines, atlines{pp},blanks(10)];
                       end
                       tlines{i}=newlines;
                   end
               end
               ll=ll+1;
           end
        end
    end
    clear parameter;
    fprintf(fid, '%s\n', tlines{:});
    fclose(fid);
    if obj.Bin, Errcode=closeOpenNetwork(obj); end
end
function [mm,mins] = sec2hrs(parameter)
   mm='';hrs=0;mins=0;
   if parameter >= 3600
       hrs=floor(parameter/3600);
       mm=[num2str(hrs), ':'];
   end
   if parameter >= 60
       mins=((parameter - 3600*hrs)/60);
   end
   if hrs
       mm=[mm sprintf('%d',(parameter-3600*hrs-60*mins))];
   elseif hrs==0 && mins==0
       mm=parameter;
       if mm<10
           mm=['00:00:0' num2str(mm)];
       else
           mm=['00:00:' num2str(mm)];
       end
   else
       mm=[sprintf('%.20f',mins) '       min'];
   end
end
function [Errcode]=setBinParam2(obj,parameter,sections,zz,varargin)
    Errcode=0;
    if strcmp(sections{1},'[STATUS]')
        value =obj.getBinLinksInfo;
        if strcmp(sections{3},'pump')
            nameID=value.BinLinkPumpStatusNameID;
            cntlv=obj.BinLinkPumpCount;
        elseif strcmp(sections{3},'valve')
            nameID=value.BinLinkValveStatusNameID;
            cntlv=obj.BinLinkValveCount;
            if strcmpi(parameter,'NONE'), Errcode=-1;return;end
        end
    elseif strcmp(sections{1},'[PATTERNS]')
        value=obj.getBinPatternsInfo;
        if ~isempty(value.BinPatternValue)
            paramAll=[value.BinPatternValue parameter];
        else
            paramAll{1}=[value.BinPatternValue parameter];
        end
        patternsid=[value.BinPatternNameID varargin];
    end
    [tlines]=regexp( fileread([obj.BinTempfile]), '\n', 'split');
    fid = writenewTemp(obj.BinTempfile);
    for i=1:length(tlines)
        tt=regexp(tlines{i}, '\s*', 'split');
        tok = strtok(tlines{i});m=1;
        % Skip blank Clines and comments
        if isempty(tok), continue;
        elseif isempty(tt{m})
            m=m+1;
        end
        if strcmp(tt{m},sections{1})
            start=i;
        end
        if strcmp(tt{m},sections{2})
            stop=i;
        end
    end
   for kk=start+1:stop-1
      tlines{kk}=''; 
   end
   for u=1:start
       nnlines{u}=tlines{u};
   end
   for u=start+1:start+2+zz
       nnlines{u}=[];
   end
   for k=start+1:length(tlines)
       nnlines{u}=tlines{k};
       u=u+1;
   end
   tlines=nnlines;clear nnlines;
   for i=start+1:stop+zz
       % Get first token in the line
       tok = strtok(tlines{i});
       if isempty(tok), tok='1'; end
       if strcmp(tok(1),';')
       else
           clear atlines;
           if ~isempty(parameter) && strcmp(sections{1},'[STATUS]')
               for ee=1:cntlv
                   atlines{1} = nameID{ee};  
                   atlines{2} = num2str(parameter{ee});  
                   newlines=[];
                   for pp=1:length(atlines)
                       newlines = [newlines, atlines{pp},blanks(10)];
                   end
                   tlines{i+ee}=newlines;
               end
           end
           if ~isempty(parameter) && strcmp(sections{1},'[QUALITY]')
               for e=1:obj.BinNodeCount
                   atlines{1} = obj.BinNodeNameID{e};  
                   atlines{2} = num2str(parameter(e));  
                   newlines=[];
                   for pp=1:length(atlines)
                       newlines = [newlines, atlines{pp},blanks(10)];
                   end
                   tlines{i+e}=newlines;
               end
           end
           if ~isempty(parameter) && strcmp(sections{1},'[PATTERNS]')
               zz=0;ll=0;
               for e=1:length(patternsid)
                   if e<length(patternsid)
                       if mod(length(value.BinPatternValue{e}),6)==0
                           zz=zz+length(value.BinPatternValue{e})/6;
                       else 
                           zz=zz+1;
                       end
                   else
                       zz=zz+1;
                       if mod(length(paramAll{e}),6)
                           zz=zz+1;
                       end
                   end
                   m=1;
                   for k=ll+1:zz
                       if mod(length(paramAll{e}),6) && k==zz
                           newlines = [patternsid{e} blanks(15) num2str(paramAll{e}(m:end))];
                       else
                           newlines = [patternsid{e} blanks(15) num2str(paramAll{e}(m:m+6-1))];
                       end
                       m=m+6;
                       tlines{i+k}=newlines;
                   end
                   ll=zz;
               end
           end
           if ~isempty(parameter) && strcmp(sections{1},'Global') && varargin{1}==1
               for e=1:obj.BinLinkCount
                   atlines{1} = 'WALL';  
                   atlines{2} = obj.BinLinkNameID{e};  
                   atlines{3} = num2str(parameter(e));  
                   newlines=[];
                   for pp=1:length(atlines)
                       newlines = [newlines, atlines{pp},blanks(10)];
                   end
                   tlines{i+e}=newlines;
               end
           end
           if ~isempty(parameter) && strcmp(sections{1},'Global') && varargin{1}==2
               for e=1:obj.BinLinkCount
                   atlines{1} = 'BULK';  
                   atlines{2} = obj.BinLinkNameID{e};  
                   atlines{3} = num2str(parameter(e));  
                   newlines=[];
                   for pp=1:length(atlines)
                       newlines = [newlines, atlines{pp},blanks(10)];
                   end
                   tlines{i+e}=newlines;
               end
           end
       end
       break;
   end
   fprintf(fid, '%s\n', tlines{:});
   fclose(fid);
    if obj.Bin==1
        Errcode=closeOpenNetwork(obj);
    end
end
function value = getBinParam(obj,sections,varargin)  
    warning off;
    [tlines]=regexp( fileread([obj.BinTempfile]), '\n', 'split');
    if strcmp(sections{1},'[SOURCES]')
        value.BinNodeSourcePatternIndex = nan(1,obj.BinNodeCount);
        value.BinNodeSourceQuality = nan(1,obj.BinNodeCount);
        value.BinNodeSourceTypeIndex = nan(1,obj.BinNodeCount);
        value.BinNodeSourceType = cell(1,obj.BinNodeCount);
        value.BinNodeSourcePatternNameID = cell(1,obj.BinNodeCount);
    else 
        value=[];
    end
    v{1}=''; 
    for i=1:length(tlines)
        tt=regexp(tlines{i}, '\s*', 'split');
        tok = strtok(tlines{i});m=1;
        % Skip blank Clines and comments
        if isempty(tok), continue;
        elseif isempty(tt{m})
            m=m+1;
        end
        if strcmp(tt{m},sections{1})
            start=i;
        end
        if strcmp(tt{m},sections{2})
            stop=i;
        end
    end
    d=1;
   for i=start+1:stop-1
       % Get first token in the line
       tok = strtok(tlines{i});
       if isempty(tok), continue; end
       if strcmp(tok(1),';')
       else
           clear atline;
           atline = checktlines(tlines{i});

            if strcmp(sections{1},'[STATUS]')
                if sum(strcmp(who,'atline'))
                    value.BinLinkInitialStatus{d}=atline{2};
                    value.BinLinkInitialStatusNameID{d}=atline{1};
                    d=d+1;
                end
           end
           if strcmp(sections{1},'[PATTERNS]')
                if sum(strcmp(who,'atline'))
                    value.BinPatternNameID{d}=atline{1};
                    value.BinPatternNameID=unique(value.BinPatternNameID);
                    w{d}=atline{1};
                    dd=length(w);
                    w=unique(w); 
                    d=length(w);
                    if dd>1 && dd~=d
                        v{d}=[v{d} str2num(char(atline(2:end)))'];
                    else
                        v{d}=str2num(char(atline(2:end)))';
                    end
                    value.BinPatternValue=v; % single
                    d=d+1;
                    value.BinCountPatternlines=d;
                end
           end
           if strcmp(sections{1},'[SOURCES]')
               if sum(strcmp(who,'atline'))
                   if length(atline)>2
                       indexPat=getBinNodeIndex(obj, atline{1});
                       indexNode=getBinNodeIndex(obj, atline{1});
                       if length(atline)>3
                           value.BinNodeSourcePatternIndex(indexPat)=getBinPatternIndex(obj, atline{4});
                           value.BinNodeSourcePatternNameID{indexNode}=atline{4};
                       end
                       value.BinNodeSourceQuality(indexNode)=str2num(atline{3});
                       value.BinNodeSourceTypeIndex(indexNode)=find((strcmpi(obj.TYPESOURCE,atline{2})-1)>-1)-1;
                       value.BinNodeSourceType{indexNode}=obj.TYPESOURCE{value.BinNodeSourceTypeIndex(indexNode)+1};
                   end
               end
           end
       end
   end
   if strcmp(sections{1},'[STATUS]')
        n=obj.getBinLinksInfo;
        value.BinLinkInitialStatusNameID=n.BinLinkInitialStatusNameID;
        value.BinLinkInitialStatus=n.BinLinkInitialStatus;
        value.BinLinkPumpStatus=n.BinLinkPumpStatus;
        value.BinLinkPumpStatusNameID=n.BinLinkPumpStatusNameID;
        value.BinLinkValveStatus=n.BinLinkValveStatus;
        value.BinLinkValveStatusNameID=n.BinLinkValveStatusNameID;   
   end
   warning on;
end
function [Errcode]=addCurve(obj,newCurveID,varargin)
v=obj.getBinCurvesInfo;Errcode=0;
CurveX=varargin{1};
CurveY=varargin{2};
typecode=varargin{3};
% PUMP 0 EFFICIENCY 1 VOLUME 2 HEADLOSS 3
for i=1:length(CurveX)
    if i+1<length(CurveX)+1
        if CurveX(i)>=CurveX(i+1)
            if strfind([0 1 3],typecode)
                warning('Flow values are not in ascending order.');
                Errcode=-1;
                return;
            elseif typecode==2
                warning('Heigh values are not in ascending order.');
                Errcode=-1;
                return;
            end
        end
    end
end

% Check if new ID already exists
if ismember(newCurveID,v.BinCurveNameID)
    warning('Curve "%s" already exists.',newCurveID);Errcode=-1; return;
end
sect=0;
% Open and read inpname
% Read all file and save in variable info
[~,info] = obj.readInpFile;
% write
fid2 = writenewTemp(obj.BinTempfile);
sps=blanks(18);
nn=0;yy=0;
for t = 1:length(info)
    a = regexp(info{t}, '\s*','split');
    if isempty(a)
        % skip
    elseif isempty(info{t})
        % skip
    else
        u=1;
        while u < length(a)+1
            if strcmp(a{u},'[CURVES]')
                fprintf(fid2,'[CURVES]');
                sect=1; break;
            end
            if (sum(info{t}=='[') && nn==0)
                if yy==0
                    if sect==0
                        fprintf(fid2,'[CURVES]\n;ID                X-Value            Y-Value\n');
                    end
                    if typecode==0
                        fprintf(fid2,';PUMP: PUMP:%sX-Value%sY-Value\n',sps,sps); yy=1;
                    elseif typecode==1
                        fprintf(fid2,';PUMP: EFFICIENCY:\n'); yy=1;
                    elseif typecode==2
                        fprintf(fid2,';PUMP: VOLUME:\n'); yy=1;
                    elseif typecode==3
                        fprintf(fid2,';PUMP: HEADLOSS:\n'); yy=1;
                    end
                end
                for i=1:length(CurveX)
                    fprintf(fid2, '%s%s%d%s%d', newCurveID,sps,CurveX(i),sps,CurveY(i));
                    fprintf(fid2,'\r\n');
                end
                fprintf(fid2,'%s',a{u});
                fprintf(fid2,'\r\n');
                nn=1;
            elseif isempty(a{u}) && nn==0
            else
                if isempty(a{u}) && nn==1
                else
                    fprintf(fid2,'%s%s',a{u},sps);
                end
            end
            u=u+1;
        end
    end
    fprintf(fid2,'\n');
end
fclose(fid2);
if obj.Bin==1
    Errcode=closeOpenNetwork(obj);
end
end
function [BinCurveNameID,BinCurveXvalue,BinCurveYvalue,BinCurveAllLines,BinCurveTypes,BinCurveCount,BinCTypes]=CurveInfo(obj)
BinCurveTypes=[];Bintypecode=0;BinCNameID={};BinCurveNameID={};BinCurveCount=0;
BinCurveXvalue=[];BinCurveYvalue=[];BinCurveAllLines={};sect=0;i=1;u=1;BinCTypes=[];
cc=1;uu=1;gg=1;
% Open epanet input file
[~,info] = obj.readInpFile;
for h=1:length(info)
    tline = info{h};
    if ~ischar(tline),   break,   end
    % Get first token in the line
    tok = strtok(tline);
    % Skip blank Clines and comments
    if isempty(tok), continue, end
    ee=regexp(tline,'\w*EFFICIENCY*\w','match');
    nn=regexp(tline,'\w*VOLUME*\w','match');
    kk=regexp(tline,'\w*HEADLOSS*\w','match');
    if strcmp(ee,'EFFICIENCY'), %typecode=1;   % EFFICIENCY
    elseif strcmp(nn,'VOLUME'), %typecode=2;   % VOLUME
    elseif strcmp(kk,'HEADLOSS'), %typecode=3; % HEADLOSS
    else
        if (tok(1) == ';'), continue, end  %typecode=0;
    end
    if (tok(1) == '[')
        % [CURVES] section
        if strcmpi(tok(1:5),'[CURV')
            sect = 1;
            continue;
            % [END]
        elseif strcmpi(tok(1:4),'[END')
            break;
        else
            sect = 0;
            continue;
        end
    end
    if sect == 0
        continue;
        % Curves
    elseif sect == 1
        ee=regexp(tline,'\w*EFFICIENCY*\w','match');
        nn=regexp(tline,'\w*VOLUME*\w','match');
        kk=regexp(tline,'\w*HEADLOSS*\w','match');
        if strcmp(ee,'EFFICIENCY'), Bintypecode=1;   % EFFICIENCY
            BinCurveAllLines{u}=tline;u=u+1;continue;
        elseif strcmp(nn,'VOLUME'), Bintypecode=2;   % VOLUME
            BinCurveAllLines{u}=tline;u=u+1;continue;
        elseif strcmp(kk,'HEADLOSS'), Bintypecode=3; % HEADLOSS
            BinCurveAllLines{u}=tline;u=u+1;continue;
        elseif (~length(strcmp(nn,'VOLUME')) || ~length(strcmp(ee,'EFFICIENCY')) || ~length(strcmp(kk,'HEADLOSS'))) &&  (tok(1)==';'), Bintypecode=0; % HEADLOSS
            BinCurveAllLines{u}=tline;u=u+1;continue;
        else
            a = textscan(tline,'%s %f %f');
            %aa=regexp(tline,'\s','split');
            BinCNameID{i}=a{1};
            if i==1
                BinCurveTypes(gg)=Bintypecode;
            elseif ~strcmp(BinCNameID{i-1},BinCNameID{i})
                if (u-i+1)==length(BinCurveTypes)
                    Bintypecode=0;
                end
                gg=gg+1;
                BinCurveTypes(gg)=Bintypecode;
            end
            BinCTypes(i)=Bintypecode;
        end
        if i==1
            BinCurveXvalue{cc}(uu)=a{2};
            BinCurveYvalue{cc}(uu)=a{3};
        elseif strcmp(BinCNameID{i-1},BinCNameID{i})
            BinCurveXvalue{cc}(uu)=a{2};
            BinCurveYvalue{cc}(uu)=a{3};
        elseif ~strcmp(BinCNameID{i-1},BinCNameID{i})
            cc=cc+1;uu=1;
            BinCurveXvalue{cc}(uu)=a{2};
            BinCurveYvalue{cc}(uu)=a{3};
        end
        uu=uu+1;
        BinCurveAllLines{u}=tline;
        i=i+1;u=u+1;
    end
end
if ~isempty(BinCNameID)
    for i=1:length(BinCNameID)
        nn(i)=BinCNameID{i};
    end
    BinCurveNameID=unique(nn);
    BinCurveCount=length(BinCurveNameID);
end
end
function Errcode=addNode(obj,typecode,varargin)
    % addNode - Add node in the network. Node type codes consist of the
    % following constants: EN_JUNCTION 0 Junction node EN_RESERVOIR 1
    % Reservoir node EN_TANK 2 Tank node
    newID=varargin{1};Errcode=0;
    X=varargin{2};
    Y=varargin{3};
    links = obj.getBinLinksInfo;
    nodes = obj.getBinNodesInfo;
    l = unique([links.BinLinkFromNode links.BinLinkToNode]);
    if nodes.BinNodeCount~=length(l)
        cg=ismember(nodes.BinNodeNameID,l);
        if ~(sum(cg)==nodes.BinNodeCount)
            ind=find(cg==0);
            warning('Node %s disconnected.',nodes.BinNodeNameID{ind(1)});
            Errcode=-1; return;
        end
    end     
    if sum(typecode==[0,1]) % junction & reservoir
        if typecode==0
            v=obj.getBinPatternsInfo;
            newidpattern=varargin{6};
            patterns=v.BinPatternNameID;
            if ~sum(strcmp(newidpattern,patterns))
                warning('Invalid argument found.');
                Errcode=-1; return;
            end
            newBaseDemand=varargin{5};
        end
        newElevation=varargin{4};
        initqual=0;
    else
        % Initial TANK
        MaxLevel=varargin{4};
        Diameter=varargin{5};
        Initlevel=varargin{6};
        newElevation=varargin{7};
        initqual=varargin{8};
        MinLevel=varargin{9};
        MinVol=varargin{10};
    end
    % Check if id new already exists
    if isempty(nodes.BinNodeNameID)
        warning('There is no such object in the network.');Errcode=-1; return;
    end
    if ismember(newID,nodes.BinNodeNameID)
        warning('Node "%s" already exists.',newID);
        Errcode=-1;return;
    end
    % check section in inpname, [JUNCTIONS], [RESERVOIRS], [TANKS]
    stank_check=1;
    sreservoir_check=1;
    sjunction_check=1;
    % Open and read inpname
    % Read all file and save in variable info
    [~,info,~] = obj.readInpFile;
    fid2 = writenewTemp(obj.BinTempfile);
    % Initiality
    qualch=0;qq=0;
    Coordch=0;onetime=1;gg=0;
    sps1=blanks(3);
    for t = 1:length(info)
        c = info{t};
        if ~isempty(c)
            a = regexp(c, '\s*','split');
        else
            a='';
        end
        if isempty(a)
            % skip
        elseif isempty(c)
            % skip
        else
            u=1;
            while u < length(a)+1
                % Find [brackets] cnt=2;
                cnt=bracketsCheck(a{u});
                %%%%%%%% Quality Section %%%%%%%%
                if strcmp(a{u},'[QUALITY]')
                    fprintf(fid2,'[QUALITY]');
                    qualch=1;
                    break;
                end
                if (cnt==2 && qualch==1)
                    fprintf(fid2, '%s%s%d', newID,sps1,initqual);
                    fprintf(fid2,'\r\n');qq=1;
                end
                %%%%%%%% Coordinates Section %%%%%%%%
                if strcmp(a{u},'[COORDINATES]');
                    fprintf(fid2,'[COORDINATES]');
                    Coordch=1; break;
                end
                if length(strfind(c,';Node'))==1 && Coordch==1 && cnt~=2
                    break;
                    elseif u==1 && Coordch==1
                    if ((gg==0)) && (typecode==0)
                        fprintf(fid2, '%s%s%d%s%d\n', newID,sps1,X,sps1,Y);
                    end
                    gg=gg+1;
                end
                if isempty(obj.NodeCoordinates) && obj.Bin==1% no bin
                    if strcmp(a{u},'[END]')
                        fprintf(fid2,'%s','[COORDINATES]');
                        fprintf(fid2,'\r\n');
                        for qq=1:length(X)
                            fprintf(fid2,'%s%s%d%s%d',char(newID(qq)),sps1,X(qq),sps1,Y(qq));
                            fprintf(fid2,'\r\n');
                        end
                        fprintf(fid2, '%s%s%d%s%d\n',...
                        newID,sps1,X,sps1,Y);
                        fprintf(fid2,'%s',a{u}); fprintf(fid2,'\r\n');
                    end
                end
                %%%%%%%% Nodes Section %%%%%%%%
                if (cnt==2 && (strcmp(a{u},'[TANKS]') || strcmp(a{u},'[JUNCTIONS]') || strcmp(a{u},'[RESERVOIRS]') || strcmp(a{u},'[DEMANDS]')))
                    if sjunction_check==0 && typecode==0 && strcmp(a{u},'[RESERVOIRS]')
                        fprintf(fid2,'[JUNCTIONS]');
                        fprintf(fid2, '\n%s%s%d%s%s\n',newID,sps1,newElevation,sps1,sps1);
                    end
                    if sreservoir_check==0 && typecode==1 && strcmp(a{u},'[TANKS]')
                        fprintf(fid2,'[RESERVOIRS]');
                        fprintf(fid2, '\n%s%s%d%s%d%s\n', newID,sps1,newElevation,sps1,'',sps1);
                    end
                    if stank_check==0 && typecode==2 && strcmp(a{u},'[PIPES]')
                        fprintf(fid2,'[TANKS]');
                        fprintf(fid2, '\n%s%s%d%s%d%s%d%s%d%s%d%s%d\n', newID,sps1,newElevation,sps1,Initlevel,sps1,MinLevel,sps1,...
                        MaxLevel,sps1,Diameter,sps1,MinVol);
                    end
                    fprintf(fid2,'%s',a{u});
                    %%%%%%%% Jynctions Section %%%%%%%%
                    if typecode==0 && strcmp(a{u},'[JUNCTIONS]')
                        fprintf(fid2, '\n%s%s%d', newID,sps1,newElevation);
                    end
                    if typecode==0 && strcmp(a{u},'[DEMANDS]')
                        fprintf(fid2, '\n%s%s%d', newID,sps1,newBaseDemand);
                    end
                    %%%%%%%% Reservoirs Section %%%%%%%%
                    if typecode==1 && strcmp(a{u},'[RESERVOIRS]')
                        fprintf(fid2, '\n%s%s%d%s%d%s', newID,sps1,newElevation);
                    end
                    %%%%%%%% Tanks Section %%%%%%%%
                    if typecode==2 && strcmp(a{u},'[TANKS]')
                        fprintf(fid2, '\n%s%s%d%s%d%s%d%s%d%s%d%s%d', newID,sps1,newElevation,sps1,Initlevel,sps1,MinLevel,sps1,...
                        MaxLevel,sps1,Diameter,sps1,MinVol);
                    end
                elseif isempty(a{u})
                else
                    fprintf(fid2,'%s%s',a{u},sps1);
                end
                u=u+1;
            end
            %%%%%%%% Coordinates Section %%%%%%%%
            if gg~=0 && onetime==1
                % Correction Index
                if isempty(char(nodes.BinNodeJunctionNameID))
                    nodes.BinJunctionsID=[];
                end
                if isempty(nodes.BinNodeReservoirNameID)
                    nodes.BinReservoirsID=[];
                end
                if isempty(nodes.BinNodeTankNameID)
                    nodes.BinNodeNameID=[];
                end
                if (gg==length(nodes.BinNodeJunctionNameID)+length(nodes.BinNodeReservoirNameID)-1) && (typecode==1) || (gg==length(nodes.BinNodeNameID)-1) && (typecode==2)
                    fprintf(fid2,'\r\n');
                    fprintf(fid2, '%s%s%d%s%d', newID,sps1,X,sps1,Y);
                    gg=0; onetime=0;
                end
            end
            if qualch==1 && qq==1
                qualch=0;
            end
            fprintf(fid2,'\n');
        end
    end
    fclose(fid2);
    if obj.Bin, Errcode=closeOpenNetwork(obj); end
end
function Errcode=addLink(obj,typecode,newLink,fromNode,toNode,varargin)
% Link type codes consist of the following constants: 
% CVPIPE 0 pipe 
% Check Valve 1 pipe
% PUMP 2   
% PRV Pressure Reducing Valve 3 
% PSV Pressure Sustaining Valve 4
% PBV Pressure Breaker Valve 5 
% FCV Flow Control Valve 6
% TCV Throttle Control Valve 7 
% GPV General Purpose Valve 8
% Initial PIPE plength, value for length of new pipe pdiameter,
% value for diameter of new pipe proughness,  value for roughness of new pipe
if typecode==1,status='Open';end
if ~typecode
    status='CV';
    typecode=1;
end
if typecode==1 && nargin>5
    plength=varargin{1};
    pdiameter=varargin{2};
    proughness=varargin{3};
elseif typecode==2
    if ~isnumeric(varargin{1})
        curveID=varargin{1};
    else
        power=varargin{1};
        curveID='';
    end
elseif typecode>2
    type_valv = obj.TYPELINK{typecode+1};
    if typecode>2, typecode=3; end
    vdiameter=varargin{1};
    vsetting=varargin{2};    
end
[Errcode]=addLinkWarnings(obj,typecode,newLink,toNode);
crvs = obj.getBinCurvesInfo;
% Open and read inpname
% Read all file and save in variable info
[~,info] = obj.readInpFile;
fid2 = writenewTemp(obj.BinTempfile);
% Add pipe
nn=0;sps=blanks(10);
for t = 1:length(info)
    c = info{t};
    a = regexp(c, '\s*','split');
    if isempty(a)
    elseif isempty(c)
    else
        u=1;
        while u < length(a)+1
            cnt=bracketsCheck(a{u});
            if (cnt==2 && strcmp(a{u},'[PIPES]') && nn==0 && typecode==1)
                fprintf(fid2,'%s',a{u});
                fprintf(fid2, '\n%s%s%s%s%s%s%d%s%d%s%d%s%d%s%s',newLink,sps,fromNode,sps,...
                    toNode,sps,plength,sps,pdiameter,sps,proughness,sps,0,sps,status);
                
            elseif (cnt==2 && strcmp(a{u},'[PUMPS]') && nn==0 && typecode==2)
                if ~isempty(curveID)
                    if isempty(char(crvs.BinCurveNameID))
                        warning('No head curve supplied for pump %s.',newLink);
                        return;
                    end
                    fprintf(fid2,'%s',a{u});
                    fprintf(fid2,'\n%s%s%s%s%s%s%s%s%s',newLink,sps,fromNode,sps,...
                        toNode,sps,'HEAD',sps,curveID);
                else
                    fprintf(fid2,'%s',a{u});
                    fprintf(fid2, '\n%s%s%s%s%s%s%s%s%.2f',newLink,sps,fromNode,sps,...
                        toNode,sps,'POWER',sps,power);
                end
            elseif typecode==3 && strcmp(a{u},'[VALVES]')
                fprintf(fid2,'%s',a{u});
                fprintf(fid2, '\n%s%s%s%s%s%s%d%s%s%s%d',newLink,sps,fromNode,sps,...
                    toNode,sps,vdiameter,sps,type_valv,sps,vsetting);
                nn=1;
            elseif isempty(a{u}) && nn==0
            else
                if isempty(a{u}) && nn==1
                else
                    fprintf(fid2,'%s%s',a{u},sps);
                end
            end
            u=u+1;
        end
    end
    fprintf(fid2,'\n');
end
fclose(fid2);
if obj.Bin, Errcode=closeOpenNetwork(obj); end
end
function [Errcode] = rmNode(obj,NodeID)
% Remove node from the network.
% Check if id new already exists
nodes = obj.getBinNodesInfo;Errcode=0;
if isempty(nodes.BinNodeNameID), return; end
if ~ismember(NodeID,nodes.BinNodeNameID)
    warning('There is no such object in the network.'); 
    Errcode=-1; return;
end
% if ismember(NodeID,nodes.BinNodeReservoirNameID) || ismember(NodeID,nodes.BinNodeTankNameID)
%     if (nodes.BinNodeReservoirCount+nodes.BinNodeTankCount-1)==0;
%         warning('This tank/reservoir has not removed.');
%         Errcode=-1; return;
%     end
% end
% Get links which delete with function Remove Link
links = obj.getBinLinksInfo;
a=strcmp(links.BinLinkFromNode,NodeID);
linkindex1=find(a);
b=strcmp(links.BinLinkToNode,NodeID);
linkindex2=find(b);
linkindex12=[linkindex1 linkindex2];
checklinks_index=unique(linkindex12);
checklinks=links.BinLinkNameID(checklinks_index);
obj.removeBinControlNodeID(NodeID);% Remove control, code 0(NODE)
obj.removeBinRulesControlNodeID(NodeID); %Remove Rule
[~,info] = obj.readInpFile;
fid2 = writenewTemp(obj.BinTempfile);
out=0; sps=blanks(10);
for t = 1:length(info)
    c = info{t};
    a = regexp(c,'\s*','split');
    if isempty(a)
    elseif isempty(c)
    else
        u=1;x=0;xx=0;q=0;
        while u < length(a)+1
            if isempty(a{u}) && (x==0)
                u=u+1; x=1;xx=1;
                if u==length(a)+1, break; end
            end
            if strcmp(a{u},'[PIPES]'), out=1; end
            if strcmp(a{u},'[DEMANDS]'), out=0; end %out=0; delete line
            if strcmp(a{u},'[PATTERNS]'), out=1; end 
            if strcmp(a{u},'[QUALITY]'), out=0; end
            if strcmp(a{u},'[SOURCES]'), out=1; end
            if strcmp(a{u},'[MIXING]'), out=0; end
            if strcmp(a{u},'[COORDINATES]'), out=0; end
            if strcmp(a{u},NodeID) && q~=1 && out==0
                if xx==1 || strcmp(a{u},NodeID)
                    u=length(a)+1;
                end
            else
                q=1;
                fprintf(fid2,'%s%s',a{u},sps);
            end
            u=u+1;
        end
    end
    fprintf(fid2,'\n');
end
fclose(fid2);
% Remove links
for i=1:length(checklinks)
    obj.removeBinLinkID(checklinks{i});
end
% Find who other id must be delete
remove_link={''};
remove_link_index = zeros(1,length(links.BinLinkFromNode));
for i=1:length(checklinks)
    remove_link(i)=checklinks(i);
    remove_link_index(i)=i;
    warning('Removed link:%s',char(remove_link(i)));
end

if obj.Bin, Errcode=closeOpenNetwork(obj); end
end
function Errcode=rmRulesControl(obj,type,id)
% Remove control from the network.
exists=0;Errcode=0;exists1=0;
rulescontrols = obj.getBinRulesControlsInfo;
if type
    if isempty(rulescontrols.BinRulesControlLinksID)
        warning('There is no rule object in the network.');
        Errcode=-1;return;
    end
    for i=length(rulescontrols.BinRulesControlLinksID):-1:1
        exists(i,:) = strcmp(rulescontrols.BinRulesControlLinksID{i}{length(rulescontrols.BinRulesControlLinksID{1})},char(id));
    end
else
    if isempty(rulescontrols.BinRulesControlNodesID)
        warning('There is no such rule in the network.');
        Errcode=-1;return;
    end
    for i=length(rulescontrols.BinRulesControlNodesID):-1:1
        exists1(i) = strcmp( rulescontrols.BinRulesControlNodesID{i}{length(rulescontrols.BinRulesControlNodesID{1})},char(id));
    end
end
if ~sum(exists) && ~sum(exists1)
    warning('There is no such rule in the network.');
    Errcode=-1; return;
end
[addSectionCoordinates,addSectionRules] = obj.getBinCoordRuleSections(obj.BinTempfile);
cntRules = cellfun('length',rulescontrols.BinRulesControlsInfo);
endInpIndex=find(~cellfun(@isempty,regexp(addSectionCoordinates,'END','match')));
[~,info] = obj.readInpFile;
info(find(~cellfun(@isempty,regexp(info,'END','match'))))='';
f1 = writenewTemp(obj.BinTempfile);
rulesSectionIndex=find(~cellfun(@isempty,regexp(info,'RULES','match')));
if ~isempty(rulesSectionIndex)
    fprintf(f1, '%s\n', info{1:rulesSectionIndex-1});    
    fprintf(f1, '[RULES]\n');
end
if type
    for i=length(rulescontrols.BinRulesControlLinksID):-1:1
        if ~exists(i)
            for j=1:length(rulescontrols.BinRulesControlsInfo{i})
                fprintf(f1, '%s\n', addSectionRules{sum(cntRules(1:i-1))+1+j});    
            end
        end
    end
else
    for i=length(rulescontrols.BinRulesControlNodesID):-1:1
        if ~exists1(i) 
            for j=1:length(rulescontrols.BinRulesControlsInfo{i})
                fprintf(f1, '%s\n', addSectionRules{sum(cntRules(1:i-1))+1+j});    
            end
        end
    end
end
if ~isempty(addSectionCoordinates) % && isempty(coordSectionIndex)
    fprintf(f1, '%s\n', addSectionCoordinates{:});
end
if isempty(endInpIndex), fprintf(f1, '[END]\n'); end
fclose(f1);
if obj.Bin, Errcode=closeOpenNetwork(obj); end
end
function Errcode=rmControl(obj,type,id)
% Remove control from the network.
Errcode=0;
controls = obj.getBinControlsInfo;
if type
    if isempty(controls.BinControlLinksID)
        warning('There is no such control in the network.');
        Errcode=-1; return;
    end
else
    if isempty(controls.BinControlNodesID)
        warning('There is no such control in the network.');
        Errcode=-1; return;
    end
end
[~,info] = obj.readInpFile;
fid2 = writenewTemp(obj.BinTempfile);
e=0;n=0;kk=1;sps=blanks(15);
for t = 1:length(info)
    c = info{t};
    a = regexp(c, '\s*','split');
    if isempty(a)
    elseif isempty(c)
    else
        u=1;
        while u < length(a)+1
            rr = regexp(a,'\w*[\w*]\w*','split');
            check_brackets = rr{:};
            ch1 = strcmp(check_brackets,'[');
            ch2 = strcmp(check_brackets,']');
            
            if strcmp(a{u},'[CONTROLS]')
                fprintf(fid2,'%s',a{u});
                n=1;
            elseif ch1(1)==1 && ch2(2)==1 && n==1
                if (isempty(a{u})&& n==1), break; end
                e=1;
            end
            if strcmp(a{u},'[END]'),  e=1; fprintf(fid2,'%s',a{u});break;   end
            
            if n==1 && e==0 && kk==1
                if strcmp(a{u},'[CONTROLS]'), break; end
                if isempty(a{u})
                elseif strfind(a{u},';')
                    break;
                else
                    if type==1
                        tt = strcmp(a{u+1},id); kk=0;
                        if tt==1
                            break;
                        else
                            fprintf(fid2,'%s%s',a{u},sps);
                        end
                    elseif type==0
                        tt = strcmp(a{u+5},id); kk=0;
                        if tt==1
                            break;
                        else
                            fprintf(fid2,'%s%s',a{u},sps);
                        end
                    end
                end
            else
                if isempty(a{u})
                else
                    fprintf(fid2,'%s%s',a{u},sps);
                end
            end
            u=u+1;
        end
    end
    fprintf(fid2,'\n');kk=1;
end
fclose(fid2);
if obj.Bin==1
    Errcode=closeOpenNetwork(obj);
end
end
function [Errcode] = rmLink(obj,LinkID)
% Remove link from the network.
% Check if id new already exists
links = obj.getBinLinksInfo;Errcode=0;
if isempty(links.BinLinkNameID)
    warning('There is no such object in the network.');
    Errcode=-1; return;
end
if ~ismember(LinkID,links.BinLinkNameID)
    warning('There is no such object in the network.');
    Errcode=-1; return;
else
    index_rmvlink = find(strcmp(LinkID,links.BinLinkNameID));
end
nodes = obj.getBinNodesInfo;
from_node = links.BinLinkFromNode(index_rmvlink);
r = strcmp(nodes.BinNodeNameID,from_node);
if sum(r)==0, from_node=''; end
to_node = links.BinLinkToNode(index_rmvlink);
r = strcmp(nodes.BinNodeNameID,to_node);
if sum(r)==0, to_node=''; end
% Remove control, code 1(LINK)
obj.removeBinControlLinkID(LinkID);
obj.removeBinRulesControlLinkID(LinkID); %Remove Rule

[~,info] = obj.readInpFile;
fid2 = writenewTemp(obj.BinTempfile);

% section [JUNCTIONS]
out=0;YY=0;sps=blanks(15);
for t = 1:length(info)
    c = info{t};
    a = regexp(c, '\s*','split');
    if isempty(a)
    elseif isempty(c)
    else
        u=1;x=0;xx=0;q=0;
        while u < length(a)+1
            if strcmp(a{u},'[PIPES]'), YY=1;end
            if YY==1
                if isempty(a{u}) && (x==0)
                    u=u+1; x=1;xx=1;
                    if u==length(a)+1
                        break
                    end
                end
                if strcmp(a{u},'[TAGS]'), out=1; end
                if strcmp(a{u},'[STATUS]'), out=1; end
                if strcmp(a{u},'[DEMANDS]'), out=1; end
                if strcmp(a{u},'[PATTERNS]'), out=1; end
                
                if strcmp(a{u},LinkID) && q~=1 && out==0
                    if xx==1 || strcmp(a{1},LinkID)
                        u=length(a)+1;
                    end
                else
                    q=1;
                    fprintf(fid2,'%s%s',a{u},sps);
                end
            else
                if isempty(a{u})
                    u=u+1;
                    if u==length(a)+1
                        break
                    end
                end
                fprintf(fid2,'%s%s',a{u},sps);
            end
            u=u+1;
        end
    end
    fprintf(fid2,'\n');
end
fclose(fid2);
% Get nodes which delete with function Remove Node
links = obj.getBinLinksInfo;
if ~ismember(from_node,[links.BinLinkToNode links.BinLinkFromNode]) && ~isempty(from_node)
    warning('Node %s disconnected.',char(from_node));
end
if ~ismember(to_node,[links.BinLinkToNode links.BinLinkFromNode]) && ~isempty(from_node)
    warning('Node %s disconnected.',char(from_node));
end
if obj.Bin,  Errcode=closeOpenNetwork(obj); end
end
function [Errcode]=addNewControl(obj,x,status,y_t_c,param,z,varargin)
% syntax
Errcode=0;
if (nargin==6)
    syntax = ['LINK ',x,' ',status,' IF NODE ',y_t_c,' ',param,' ',num2str(z)];
elseif (nargin==5)
    syntax = ['LINK ',x,' ',status,' AT CLOCKTIME ',y_t_c,' ',param];
elseif (nargin==4)
    syntax = ['LINK ',x,' ',status,' AT TIME ',y_t_c];
end
if (nargin==6)
    % Check if id new already exists
    if ~ismember(x,obj.getBinNodesInfo.BinNodeNameID)
        warning('There is no such object in the network.');
        Errcode=-1; return;
    end
end
if (nargin==2)
   controls = x; 
else
    % Check if id new already exists
    if ~ismember(x,obj.getBinLinksInfo.BinLinkNameID)
        warning('There is no such object in the network.');
        Errcode=-1; return;
    end
end
type_n='[CONTROLS]';
[~,info] = obj.readInpFile;
m = strfind(info, type_n);
Index = find(not(cellfun('isempty', m)));
fid2 = writenewTemp(obj.BinTempfile);
noo=0;s=0;sps=blanks(15);goOut=0;
for i=1:Index-1
    fprintf(fid2,'%s',info{i});
    fprintf(fid2,'\n');
end                    
for t = Index:length(info)
    c = info{t};
    a = regexp(c, '\s*','split');
    if isempty(a)
    elseif isempty(c)
    else
        u=1;
        while u < length(a)+1
            if strcmp(a{u},type_n);
                fprintf(fid2,'[CONTROLS]');
                s=1; break;
            end
            if (s==1) && (noo==0)
                if (nargin==2)
                    for i=1:length(controls)
                        fprintf(fid2, controls(i,:));
                        fprintf(fid2,'\r\n');
                    end
                    for i=t:length(info)
                        fprintf(fid2,'%s',info{i});
                        fprintf(fid2,'\n');
                    end                    
                    goOut=1;
                end
                if ~goOut
                    fprintf(fid2, '%s',syntax);
                    fprintf(fid2,'\r\n');
                    fprintf(fid2,c);
                    noo=1;
                end
                break;
            elseif isempty(a{u}) && noo==0
            else
                if isempty(a{u}) && noo==1
                else
                    fprintf(fid2,'%s%s',a{u},sps);
                end
            end
            u=u+1;
        end
    end
    if goOut, break; end
    fprintf(fid2,'\n');
end
fclose(fid2);
if obj.Bin, Errcode=closeOpenNetwork(obj); end
end
function [Errcode]=rmCurveID(obj,CurveID,varargin)
% Check if id new already exists
Errcode=0;
if ~ismember(CurveID, obj.getBinCurvesInfo.BinCurveNameID)
    warning('There is no such object in the network.');
    Errcode=-1; return;
end
value=obj.getBinLinksInfo;
indCurve = find(strcmp(CurveID,value.BinLinkPumpCurveNameID),1);
if ~isempty(indCurve)
    warning('Pump %s refers to undefined curve.',value.BinLinkPumpNameID{indCurve});
end
% Open and read inpname
% Read all file and save in variable info
[~,info] = obj.readInpFile;
fid2 = writenewTemp(obj.BinTempfile);
e=0;n=0;sps=blanks(15);
for t = 1:length(info)
    c = info{t};
    a = regexp(c, '\s*','split');
    if isempty(a)
    elseif isempty(c)
    else
        u=1;
        while u < length(a)+1
            rr = regexp(a,'\w*[\w*]\w*','split');
            check_brackets = rr{:};
            ch1 = strcmp(check_brackets,'[');
            ch2 = strcmp(check_brackets,']');
            if strcmp(a{u},'[CURVES]')
                fprintf(fid2,'%s',a{u});
                n=1;
            elseif ch1(1)==1 && ch2(2)==1 && n==1
                if (isempty(a{u})&& n==1), break; end
                e=1;
            end
            if strcmp(a{u},'[END]'), e=1; fprintf(fid2,'%s',a{u});break;end
            if n==1 && e==0
                if strcmp(a{u},'[CURVES]'), break; end
                if isempty(a{u})
                    u=u+1;continue;
                elseif strfind(a{u},';') 
                    ee=regexp(c,'\w*EFFICIENCY*\w','match');
                    nn=regexp(c,'\w*VOLUME*\w','match');
                    kk=regexp(c,'\w*HEADLOSS*\w','match');
                    if length(strcmp(ee,'EFFICIENCY')) || length(strcmp(nn,'VOLUME')) || length(strcmp(kk,'HEADLOSS')) || length(strcmp(a{1},';PUMP:'))
                        fprintf(fid2,'%s%s',a{u},sps);
                    else
                        break;
                    end
                else
                    tt = strcmp(a{u},CurveID);
                    if tt==1
                        u = length(a)+1;
                    else
                        fprintf(fid2,'%s%s',a{u},sps);
                    end
                end
            else
                if isempty(a{u})
                else
                    if strcmp(a{u},'[CURVES]'), break; end
                    fprintf(fid2,'%s%s',a{u},sps);
                end
            end
            u=u+1;
        end
    end
    fprintf(fid2,'\n');
end
fclose(fid2);
if obj.Bin, Errcode=closeOpenNetwork(obj); end
end
function [Errcode]=Options(obj,newFlowUnits,headloss,varargin)
% Notes: Flow units codes are as follows: 
% CFS cubic feet per second
% GPM gallons per minute 
% MGD million gallons per day 
% IMGD Imperial mgd 
% AFD acre-feet per day 
% LPS liters per second 
% LPM liters per minute 
% MLD million liters per day 
% CMH cubic meters per hour 
% CMD cubic meters per day
value=obj.getBinOptionsInfo;Errcode=0;
previousFlowUnits=value.BinLinkFlowUnits;
newUnits_US_Customary=0;
newUnits_SI_Metric=0;
switch newFlowUnits
    case 'CFS'
        newUnits_US_Customary=1;
    case 'GPM'
        newUnits_US_Customary=1;
    case 'MGD'
        newUnits_US_Customary=1;
    case 'IMGD'
        newUnits_US_Customary=1;
    case 'AFD'
        newUnits_US_Customary=1;
    case 'LPS'
        newUnits_SI_Metric=1;
    case 'LPM'
        newUnits_SI_Metric=1;
    case 'MLD'
        newUnits_SI_Metric=1;
    case 'CMH'
        newUnits_SI_Metric=1;
    case 'CMD'
        newUnits_SI_Metric=1;
end
if newUnits_US_Customary==value.BinUnits_US_Customary
    changes=0; newUnits_US_Customary=0;
    newUnits_SI_Metric=0; % feet to feet
elseif newUnits_SI_Metric==value.BinUnits_SI_Metric
    changes=1; newUnits_US_Customary=0;
    newUnits_SI_Metric=0; % meter to meter
elseif value.BinUnits_US_Customary==1 && newUnits_US_Customary==0
    changes=1; % feet to meter or cubic feet to cubic meter
elseif value.BinUnits_US_Customary==0 && newUnits_US_Customary==1
    changes=2; % meter to feet or cubic meter to cubic feet
end
Units=newUnits_US_Customary+newUnits_SI_Metric;
variables=who;nheadl=0;
if ~sum(strcmp('headloss',variables))
    headloss=value.BinOptionsHeadloss;
    nheadl=1;
end
nodes = obj.getBinNodeNameID;
links = obj.getBinLinkNameID;
controls = obj.getBinControlsInfo;
curves = obj.getBinCurvesInfo;
rules=obj.getBinRulesControlsInfo;

[info] = readAllFile(obj.BinTempfile);
fid2 = writenewTemp(obj.BinTempfile);
sect=0;
nn=0;pp=1;sps=blanks(15);
for t = 1:length(info)
    a = info{t};
    c = cell2mat(a);
    if isempty(a)
        % skip
    elseif isempty(c)
        % skip
    else
        u=1;
        while u < length(a)+1
            if strcmp(a{u},'[JUNCTIONS]') && Units
                fprintf(fid2,'[JUNCTIONS]');
                sect=1;
                break;
            elseif strcmp(a{u},'[RESERVOIRS]') && Units
                fprintf(fid2,'[RESERVOIRS]');
                nn=0;pp=1;
                sect=2;
                break;
            elseif strcmp(a{u},'[TANKS]') && Units
                fprintf(fid2,'[TANKS]');
                nn=0;pp=1;
                sect=3;
                break;
            elseif strcmp(a{u},'[PIPES]') && Units
                fprintf(fid2,'[PIPES]');
                nn=0;pp=1;
                sect=4;
                break;
            elseif strcmp(a{u},'[PUMPS]') && Units
                fprintf(fid2,'[PUMPS]');
                nn=0;pp=1;
                sect=5;
                break;
            elseif strcmp(a{u},'[VALVES]') && Units
                fprintf(fid2,'[VALVES]');
                nn=0;pp=1;
                sect=6;
                break;
            elseif strcmp(a{u},'[DEMANDS]') && ((Units || ~changes) && nheadl)
                fprintf(fid2,'[DEMANDS]');
                nn=0;pp=1;
                sect=7;
                break;            
            elseif strcmp(a{u},'[EMITTERS]') && ((Units || ~changes) && nheadl)
                fprintf(fid2,'[EMITTERS]');
                nn=0;pp=1;
                sect=8;
                break;
            elseif strcmp(a{u},'[STATUS]') 
                fprintf(fid2,'[STATUS]');
                nn=0;pp=1;
                sect=9;
                break;
            elseif strcmp(a{u},'[PATTERNS]') 
                fprintf(fid2,'[PATTERNS]');
                nn=1;
                sect=10;
                break;
            elseif strcmp(a{u},'[CURVES]') && ((Units || ~changes) && nheadl)
                fprintf(fid2,'[CURVES]');
                nn=0;pp=1;ww=1;
                sect=11;
                break;
            elseif strcmp(a{u},'[CONTROLS]') && Units
                fprintf(fid2,'[CONTROLS]');
                nn=0;pp=1;
                sect=12;
                break;
            elseif strcmp(a{u},'[RULES]') && Units
                fprintf(fid2,'[RULES]');
                nn=0;pp=1;
                sect=13;
                break;                
            elseif strcmp(a{u},'[OPTIONS]')
                fprintf(fid2,'[OPTIONS]');
                sect=14;nn=0;
                break;
            end
                % section [JUNCTIONS]
            if (sect==1) && (nn==0)
                mm=1;
                if pp<length(char(nodes.BinNodeJunctionNameID))+1
                    if strcmp(a{mm},nodes.BinNodeJunctionNameID{pp})
                        pp=pp+1;
                        fprintf(fid2,'%s%s',char(a{mm}),sps);
                        if changes==1
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.3048),sps);
                        elseif changes==2
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*3.281),sps);
                        end
                        if length(a)>2
                            mm=2;
                            setflow(previousFlowUnits,newFlowUnits,fid2,a,sps,mm)
                        end
                    end
                else
                    nn=1;
                end
                break;
                % section [RESERVOIRS]
            elseif (sect==2) && (nn==0)
                mm=1;
                if pp<length(char(nodes.BinNodeReservoirNameID))+1
                    if strcmp(a{mm},nodes.BinNodeReservoirNameID{pp})
                        pp=pp+1;
                        fprintf(fid2,'%s%s',char(a{mm}),sps);
                        if changes==1
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.3048),sps);
                        elseif changes==2
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*3.281),sps);
                        end
                    end
                else
                    nn=1;
                end
                break;
                % section [TANKS]
            elseif (sect==3) && (nn==0)
                mm=1;
                if pp<length(char(nodes.BinNodeTankNameID))+1
                    if strcmp(a{mm},nodes.BinNodeTankNameID{pp})
                        pp=pp+1;
                        fprintf(fid2,'%s%s',char(a{mm}),sps);
                        if changes==1
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.3048),sps);
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+2})*0.3048),sps);
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+3})*0.3048),sps);
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+4})*0.3048),sps);
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+5})*0.3048),sps);
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+6})*0.02831685),sps);
                        elseif changes==2
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*3.281),sps);
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+2})*3.281),sps);
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+3})*3.281),sps);
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+4})*3.281),sps);
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+5})*3.281),sps);
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+6})*35.3147),sps);
                        end
                    end
                else
                    nn=1;
                    fprintf(fid2,'%s%s',char(a{1}),sps);
                end
                break;
                % section [PIPES]
            elseif (sect==4) && (nn==0)
                mm=1;
                if pp<length(char(links.BinLinkPipeNameID))+1
                    if strcmp(a{mm},links.BinLinkPipeNameID{pp})
                        pp=pp+1;
                        for mm=mm:mm+2
                            fprintf(fid2,'%s%s',char(a{mm}),sps);
                        end
                        if changes==1
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.3048),sps);
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+2})*25.4),sps);
                            if nheadl
                                if strcmp('D-W',value.BinOptionsHeadloss)
                                    fprintf(fid2,'%s%s',num2str(str2num(a{mm+3})*0.3048),sps);
                                    mm=7;
                                else
                                    mm=6;
                                end
                            end
                        elseif changes==2
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*3.281),sps);
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+2})*0.03937007874),sps);
                            if nheadl
                                if strcmp('D-W',value.BinOptionsHeadloss)
                                    mm=7;
                                else
                                    mm=6;
                                end
                            end
                        end
                        for mm=mm:length(a)
                            fprintf(fid2,'%s%s',char(a{mm}),sps);
                        end
                    end
                else
                    nn=1;
                    fprintf(fid2,'%s%s',char(a{1}),sps);
                end
                break;
            % section [PUMPS]
            elseif (sect==5) && (nn==0)
                mm=1; 
                if pp<length(char(links.BinLinkPumpNameID))+1
                    if strcmp(a{mm},links.BinLinkPumpNameID{pp})
                        pp=pp+1;
                        for mm=mm:length(a)
                            fprintf(fid2,'%s%s',char(a{mm}),sps);
                        end
                        power=regexp(c,'POWER','match');
                        if strcmpi(power,'POWER')
                            mm=mm-1;
                            if changes==1 
                                fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.745699882507324),sps);
                            elseif changes==2
                                fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})/0.745699882507324),sps);
                            end
                        end
                    end
                else
                    nn=1;
                    fprintf(fid2,'%s%s',char(a{1}),sps);
                end
                break;
            % section [VALVES]
            elseif (sect==6) && (nn==0)
                mm=1;
                if pp<length(char(links.BinLinkValveNameID))+1
                    if strcmp(a{mm},links.BinLinkValveNameID{pp})
                        pp=pp+1;
                        for mm=mm:(mm+2)
                            fprintf(fid2,'%s%s',char(a{mm}),sps);
                        end
                        prv=regexp(c,'PRV','match');if isempty(prv), prv=0; end
                        psv=regexp(c,'PSV','match');if isempty(psv), psv=0; end
                        pbv=regexp(c,'PBV','match');if isempty(pbv), pbv=0; end
                        fcv=regexp(c,'FCV','match');if isempty(fcv), fcv=0; end
%                         tcv=regexp(c,'TCV','match');if isempty(tcv), tcv=0; end
                        if changes==1
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*25.4),sps);
                            fprintf(fid2,'%s%s',char(a{mm+2}),sps);
                            if strcmpi(prv,'PRV') || strcmpi(psv,'PSV') || strcmpi(pbv,'PBV') %|| strcmpi(tcv,'TCV')
                                fprintf(fid2,'%s%s',num2str(str2num(a{mm+3})*0.3048),sps);
                            elseif strcmpi(fcv,'FCV')
                                setflow(previousFlowUnits,newFlowUnits,fid2,a,sps,mm)
                            end
                        elseif changes==2
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.03937007874),sps);
                            fprintf(fid2,'%s%s',char(a{mm+2}),sps);
                            if strcmpi(prv,'PRV') || strcmpi(psv,'PSV') || strcmpi(pbv,'PBV') %|| strcmpi(tcv,'TCV')
                                fprintf(fid2,'%s%s',num2str(str2num(a{mm+3})/0.3048),sps);
                            elseif strcmpi(fcv,'FCV')
                                setflow(previousFlowUnits,newFlowUnits,fid2,a,sps,mm)
                            end
                        end
                        for mm=(mm+4):length(a)
                            fprintf(fid2,'%s%s',char(a{mm}),sps);
                        end
                    end
                else
                    nn=1;
                    fprintf(fid2,'%s%s',char(a{1}),sps);
                end
                break;
                % section [DEMANDS]
            elseif (sect==7) && (nn==0)
                mm=1;
                if mm < length(a)+1
                    if pp<length(char(nodes.BinNodeJunctionNameID))+1
                        if strcmp(a{mm},nodes.BinNodeJunctionNameID{pp})
                            pp=pp+1;
                            fprintf(fid2,'%s%s',char(a{mm}),sps);
                            setflow(previousFlowUnits,newFlowUnits,fid2,a,sps,mm)
                            if length(a)>2
                                fprintf(fid2,'%s%s',char(a{mm+2}),sps);
                            end
                        end
                    else
                        nn=1;
                        fprintf(fid2,'%s%s',char(a{1}),sps);
                    end
                end
                break;
                % section [EMITTERS]
            elseif (sect==8) && (nn==0)
                mm=1;
                if mm < length(a)+1
                    if sum(strcmp(a{mm},nodes.BinNodeJunctionNameID))
                        fprintf(fid2,'%s%s',char(a{mm}),sps);
                        setflow(previousFlowUnits,newFlowUnits,fid2,a,sps,mm)
                    end
                end
                break;
                % section [STATUS]
            elseif (sect==9) && (nn==0)
                mm=1;
                if mm < length(a)+1
                    if pp<length(char(nodes.BinNodeJunctionNameID))+1
                        if strcmp(a{mm},nodes.BinNodeJunctionNameID{pp})
                            pp=pp+1;
                            fprintf(fid2,'%s%s',char(a{mm}),sps);
                            if length(a)==2
                                fprintf(fid2,'%s%s',char(a{mm+1}),sps);
                            end
                            if length(a)>2
                                fprintf(fid2,'%s%s',char(a{mm+2}),sps);
                            end
                        end
                    else
                        nn=1;
                        fprintf(fid2,'%s%s',char(a{1}),sps);
                    end
                end
                break;
                
                % section [CURVES]
            elseif (sect==11) && (nn==0)
                mm=1;
                if strfind(c,';ID')
                    break;
                end
                if pp<length(curves.BinCurveAllLines)+1 && ~isempty(char(a)) % PUMP % EFFICIENCY % VOLUME
                    if ww<length(curves.BinCTypes)+1
                        if curves.BinCTypes(ww)==0
                            if strfind(c,';PUMP:')
                                fprintf(fid2,c);break;
                            end
                            pp=pp+1;
                            fprintf(fid2,'%s%s',char(a{mm}),sps);
                            setflow(previousFlowUnits,newFlowUnits,fid2,a,sps,mm);
                            if changes==1
                                fprintf(fid2,'%s%s',num2str(str2num(a{mm+2})*0.3048),sps);
                            elseif changes==2
                                fprintf(fid2,'%s%s',num2str(str2num(a{mm+2})*3.281),sps);
                            else
                                fprintf(fid2,'%s%s',char(a{mm+2}),sps);
                            end
                            break;
                        elseif curves.BintypeCurve(ww)==1
                            ee=regexp(c,'\w*EFFICIENCY*\w','match');
                            if length(strcmp(ee,'EFFICIENCY'))
                                fprintf(fid2,c);break;
                            end
                            pp=pp+1;
                            fprintf(fid2,'%s%s',char(a{mm}),sps);
                            setflow(previousFlowUnits,newFlowUnits,fid2,a,sps,mm)
                            fprintf(fid2,'%s%s',char(a{mm+2}),sps);
                        elseif curves.BintypeCurve(ww)==2
                            gg=regexp(c,'\w*VOLUME*\w','match');
                            if length(strcmp(gg,'VOLUME'))
                                fprintf(fid2,c);break;
                            end
                            pp=pp+1;
                            fprintf(fid2,'%s%s',char(a{mm}),sps);
                            if changes==1
                                fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*2.831685e-02),sps);
                                fprintf(fid2,'%s%s',num2str(str2num(a{mm+2})*0.3048),sps);
                            else
                                fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})),sps);
                                fprintf(fid2,'%s%s',num2str(str2num(a{mm+2})),sps);
                            end
                        elseif curves.BintypeCurve(ww)==3 % HEADLOSS
                            kk=regexp(c,'\w*HEADLOSS*\w','match');
                            if length(strcmp(kk,'HEADLOSS'))
                                fprintf(fid2,c);break;
                            end
                            pp=pp+1;
                            fprintf(fid2,'%s%s',char(a{mm}),sps);
                            if changes==1
                                fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.3048),sps);
                            elseif changes==2
                                fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*3.281),sps);
                            else
                                fprintf(fid2,'%s%s',char(a{mm+1}),sps);
                            end
                            mm=mm+1;
                            setflow(previousFlowUnits,newFlowUnits,fid2,a,sps,mm)
                        end
                        ww=ww+1;
                    end
                    pp=pp+1;
                else
                    if ~(ww<length(curves.BinCTypes)+1), nn=1; end
                end
                if ~isempty(regexp(a{mm},'[\w]*','match'))
                    nn=1;
                    fprintf(fid2,'%s%s',char(c),sps);
                end
                break;
                % section [CONTROLS]
            elseif (sect==12) && (nn==0)
                e=regexp(a,';','match');
                if length(e)>0
                    if ~isempty(e{1})
                        break;
                    end
                end
                mm=1;
                if pp<length(controls.BinControlsInfo)+1
                    pp=pp+1;
                    if length(a)>7
                        if strcmpi(a{mm+6},'BELOW') || strcmpi(a{mm+6},'ABOVE')
                            for mm=mm:(mm+6)
                                fprintf(fid2,'%s%s',char(a{mm}),sps);
                            end
                            v=find(strcmp(a{2},obj.BinLinkNameID));
                            index=obj.getBinLinkIndex(obj.BinLinkNameID(v));
                            if ~strcmp(obj.BinLinkType(index),'TCV') && ~strcmp(obj.BinLinkType(index),'GPV')
                                if changes==1
                                    if strcmp(obj.BinLinkType(index),'FCV')
                                        setflow(previousFlowUnits,newFlowUnits,fid2,a,sps,mm)
                                    else
                                        fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.3048),sps);
                                    end
                                elseif changes==2
                                    if strcmp(obj.BinLinkType(index),'FCV')
                                        setflow(previousFlowUnits,newFlowUnits,fid2,a,sps,mm)
                                    else
                                        fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*3.281),sps);
                                    end
                                end
                            else
                                fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})),sps);
                            end
                        else
                            for mm=mm:length(a)
                                fprintf(fid2,'%s%s',char(a{mm}),sps);
                            end
                        end
                    else
                        for mm=mm:length(a)
                            fprintf(fid2,'%s%s',char(a{mm}),sps);
                        end
                    end
                else
                    nn=1;
                    fprintf(fid2,'%s%s',char(a{1}),sps);
                end
                break;
                % section [RULES]
            elseif (sect==13) && (nn==0)
                mm=1;
                if pp<rules.BinRulesCount+1
                    pp=pp+1;
                    if strcmpi(regexp(cell2mat(a),'\s*LEVEL*','match'),'LEVEL') %|| 
                        for mm=mm:(mm+4)
                            fprintf(fid2,'%s%s',char(a{mm}),sps);
                        end
                        if changes==1
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.3048),sps);
                        elseif changes==2
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*3.281),sps);
                        end
                    elseif strcmpi(regexp(cell2mat(a),'\s*HEAD*','match'),'HEAD')
                        for mm=mm:(mm+4)
                            fprintf(fid2,'%s%s',char(a{mm}),sps);
                        end
                        if changes==1
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.3048),sps);
                        elseif changes==2
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*3.281),sps);
                        end
                    elseif strcmpi(regexp(cell2mat(a),'\s*DEMAND*','match'),'HEAD')
                        for mm=mm:(mm+4)
                            fprintf(fid2,'%s%s',char(a{mm}),sps);
                        end
                        setflow(previousFlowUnits,newFlowUnits,fid2,a,sps,mm)
                    elseif strcmpi(regexp(cell2mat(a),'\s*PRESSURE*','match'),'HEAD')
                        for mm=mm:(mm+4)
                            fprintf(fid2,'%s%s',char(a{mm}),sps);
                        end
                        if changes==1
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})/1.422),sps);
                        elseif changes==2
                            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*1.422),sps);
                        end
                    else
                        for mm=mm:length(a)
                            fprintf(fid2,'%s%s',char(a{mm}),sps);
                        end
                    end
                else
                    nn=1;
                    for mm=mm:length(a)
                        fprintf(fid2,'%s%s',char(a{mm}),sps);
                    end
                end
                break;                
                % section [OPTIONS]
            elseif (sect==14) && (nn==0)
                mm=1;
                if strcmpi(a{mm},'UNITS')
                    fprintf(fid2,'%s%s',char(a{mm}),sps);
                    if nheadl
                        fprintf(fid2,'%s%s',char(newFlowUnits),sps);nn=1;
                    else
                        fprintf(fid2,'%s%s',char(previousFlowUnits),sps);
                    end
                elseif strcmpi(a{mm},'HEADLOSS')
                    fprintf(fid2,'%s%s',char(a{mm}),sps);
                    fprintf(fid2,'%s%s',char(headloss),sps);
                    nn=1;
                else
                    fprintf(fid2,c);
                end
                break;
            elseif isempty(a{u}) && nn==0
            else
                if isempty(a{u}) && nn==1
                else
                    fprintf(fid2,'%s%s',a{u},sps);
                end
            end
            u=u+1;
        end
    end
    fprintf(fid2,'\n');
end
fclose(fid2);
if obj.Bin, Errcode=closeOpenNetwork(obj); end
end
function Errcode=closeOpenNetwork(obj)
    obj.closeNetwork;  %Close input file 
    Errcode=ENopen([obj.BinTempfile],[obj.BinTempfile(1:end-4),'.txt'],[obj.BinTempfile(1:end-4),'.bin'],obj.LibEPANET);
end
function setflow(previousFlowUnits,newFlowUnits,fid2,a,sps,mm)
if strcmp(previousFlowUnits,'GPM')
    switch newFlowUnits %(GPM)
        case 'CFS' 
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.00222816399286988),sps);
        case 'MGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.00144),sps);
        case 'IMGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.00119905),sps);
        case 'AFD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.004419191),sps);
        case 'LPS'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.0630902),sps);
        case 'LPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*3.785412),sps);
        case 'MLD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.005450993),sps);
        case 'CMH'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.2271247),sps);
        case 'CMD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*5.450993),sps);
        otherwise
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})),sps);
    end
elseif strcmp(previousFlowUnits,'CFS')
    switch newFlowUnits
        case 'GPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*448.8312),sps);
        case 'MGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.6463169),sps);
        case 'IMGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.5381711),sps);
        case 'AFD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*1.983471),sps);
        case 'LPS'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*28.31685),sps);
        case 'LPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*1899.011),sps);
        case 'MLD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*2.446576),sps);
        case 'CMH'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*101.9406),sps);
        case 'CMD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*2446.576),sps);
        otherwise
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})),sps);
    end
elseif strcmp(previousFlowUnits,'MGD')
    switch newFlowUnits
        case 'CFS'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*1.547229),sps);
        case 'GPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*694.4445),sps);
        case 'IMGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.8326738),sps);
        case 'AFD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*3.068883),sps);
        case 'LPS'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*43.81264),sps);
        case 'LPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*2628.758),sps);
        case 'MLD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*3.785412),sps);
        case 'CMH'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*157.7255),sps);
        case 'CMD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*3785.412),sps);
        otherwise
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})),sps);
    end
elseif strcmp(previousFlowUnits,'IMGD')
    switch newFlowUnits
        case 'CFS'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*1.858145),sps);
        case 'GPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*833.9936),sps);
        case 'MGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*1.200951),sps);
        case 'AFD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*3.685577),sps);
        case 'LPS'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*52.61681),sps);
        case 'LPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*3157.008),sps);
        case 'MLD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*4.546092),sps);
        case 'CMH'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*189.4205),sps);
        case 'CMD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*4546.092),sps);
        otherwise
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})),sps);
    end
elseif strcmp(previousFlowUnits,'AFD')
    switch newFlowUnits
        case 'CFS'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.5041667),sps);
        case 'GPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*226.2857),sps);
        case 'MGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.3258514),sps);
        case 'IMGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.271328),sps);
        case 'LPS'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*14.27641),sps);
        case 'LPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*856.5846),sps);
        case 'MLD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*1.233482),sps);
        case 'CMH'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*51.39508),sps);
        case 'CMD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*1233.482),sps);
        otherwise
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})),sps);
    end
elseif strcmp(previousFlowUnits,'LPS')
    switch newFlowUnits
        case 'CFS'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.03531466),sps);
        case 'GPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*15.85032),sps);
        case 'MGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.02282446),sps);
        case 'IMGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.01900533),sps);
        case 'AFD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.07004562),sps);
        case 'LPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*60),sps);
        case 'MLD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.0864),sps);
        case 'CMH'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*3.6),sps);
        case 'CMD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*86.4),sps);
        otherwise
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})),sps);
    end
elseif strcmp(previousFlowUnits,'LPM')
    switch newFlowUnits
        case 'CFS'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.0005885777),sps);
        case 'GPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.264172),sps);
        case 'MGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.0003804078),sps);
        case 'IMGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.0003167556),sps);
        case 'AFD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.0011674272),sps);
        case 'LPS'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.01666667),sps);
        case 'MLD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.00144),sps);
        case 'CMH'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.06),sps);
        case 'CMD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*1.44),sps);
        otherwise
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})),sps);
    end
elseif strcmp(previousFlowUnits,'MLD')
    switch newFlowUnits
        case 'CFS'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.4087345),sps);
        case 'GPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*183.4528),sps);
        case 'MGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.264172),sps);
        case 'IMGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.2199692),sps);
        case 'AFD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.8107132),sps);
        case 'LPS'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*11.57407),sps);
        case 'LPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*694.4445),sps);
        case 'CMH'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*41.66667),sps);
        case 'CMD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*1000),sps);
        otherwise
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})),sps);
    end
elseif strcmp(previousFlowUnits,'CMH')
    switch newFlowUnits
        case 'CFS'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.009809635),sps);
        case 'GPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*4.402868),sps);
        case 'MGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.006340129),sps);
        case 'IMGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.00527926),sps);
        case 'AFD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.01945712),sps);
        case 'LPS'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.2777778),sps);
        case 'LPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*16.66667),sps);
        case 'MLD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.024),sps);
        case 'CMD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*24),sps);
        otherwise
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})),sps);
    end
elseif strcmp(previousFlowUnits,'CMD')
    switch newFlowUnits
        case 'CFS'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.0004087345),sps);
        case 'GPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.1834528),sps);
        case 'MGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.000264172),sps);
        case 'IMGD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.0002199692),sps);
        case 'AFD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.0008107132),sps);
        case 'LPS'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.01157407),sps);
        case 'LPM'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.6944444),sps);
        case 'MLD'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.001),sps);
        case 'CMH'
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})*0.04166667),sps);
        otherwise
            fprintf(fid2,'%s%s',num2str(str2num(a{mm+1})),sps);
    end
end
end
function [fid,binfile,rptfile] = runEPANETexe(obj)
    arch = computer('arch');
    [inpfile, rptfile, binfile]= createTempfiles(obj.BinTempfile);
    if strcmp(arch,'win64') || strcmp(arch,'win32')
        [~,lpwd]=system(['cmd /c for %A in ("',obj.LibEPANETpath,'") do @echo %~sA']);
        libPwd=regexp(lpwd,'\s','split');
        r = sprintf('%s//epanet2d.exe %s %s %s',libPwd{1},inpfile,rptfile,binfile);
    end
    if strcmpi(arch(1:4),'glnx')
        r = sprintf('%sepanet2d %s %s %s',obj.LibEPANETpath,obj.BinTempfile,rptfile,binfile);
    end
    if obj.getCMDCODE, [~,~]=system(r); else system(r); end
    fid = fopen(binfile,'r');
end
function value = getBinComputedTimeSeries(obj,indParam,varargin)
    [fid,binfile,rptfile] = runEPANETexe(obj);
    value=[];
    if fid~=-1
        data = fread(fid,'int32');
        BinNodeCount=data(3);
        BinNodeResTankCount=data(4);
        BinLinkCount=data(5);
        BinLinkPumpCount=data(6);
        NumberReportingPeriods = data(end-2);
        if indParam==27
            value = NumberReportingPeriods; 
        end
        if indParam==28
            value = data(15); % simulation duration
        end
        clear data;
        % Beginning of file
        fseek(fid, 0, 'bof');
        fread(fid, 15, 'uint32');
        fread(fid, 808, '*char');
        fread(fid, 4, 'uint32');
        fread(fid, 32*BinNodeCount+32*BinLinkCount, '*char'); % error NODES*32
        fread(fid, BinLinkCount*3, 'uint32');
        fread(fid, BinNodeResTankCount*2, 'uint32'); % error
        switch indParam
            case 1
                value =fread(fid, BinNodeCount, 'float')'; % ElevationEachNode
            case 2
                fread(fid, BinNodeCount, 'float');
                value =fread(fid, BinLinkCount, 'float')'; % LengthEachLink
            case 3
                fread(fid, BinNodeCount+BinLinkCount, 'float');
                value =fread(fid, BinLinkCount, 'float')'; % DiameterEachLink
            case 4
                fread(fid, BinNodeCount+BinLinkCount*2, 'float');
                value =fread(fid, BinLinkPumpCount, 'float')'; % PumpIndexListLinks
            case 5
                fread(fid, BinNodeCount+BinLinkCount*2+BinLinkPumpCount, 'float');
                value =fread(fid, BinLinkPumpCount, 'float')'; % PumpUtilization
            case 6
                fread(fid, BinNodeCount+BinLinkCount*2+BinLinkPumpCount*2, 'float');
                value =fread(fid, BinLinkPumpCount, 'float')'; % AverageEfficiency
            case 7
                fread(fid, BinNodeCount+BinLinkCount*2+BinLinkPumpCount*3, 'float');
                value =fread(fid, BinLinkPumpCount, 'float')'; % AverageKwattsOrMillionGallons
            case 8
                fread(fid, BinNodeCount+BinLinkCount*2+BinLinkPumpCount*4, 'float');
                value =fread(fid, BinLinkPumpCount, 'float')'; % AverageKwatts
            case 9
                fread(fid, BinNodeCount+BinLinkCount*2+BinLinkPumpCount*5, 'float');
                value =fread(fid, BinLinkPumpCount, 'float')'; % PeakKwatts
            case 10
                fread(fid, BinNodeCount+BinLinkCount*2+BinLinkPumpCount*6, 'float');
                value =fread(fid, BinLinkPumpCount, 'float')'; % AverageCostPerDay
        end
        if indParam>10
            fread(fid, BinNodeCount+BinLinkCount*2+BinLinkPumpCount*7+1, 'float');
            for i=1:NumberReportingPeriods
                switch indParam
                    case 11
                        value(i,:) = fread(fid, BinNodeCount, 'float')'; % nodeDemand
                        fread(fid, BinNodeCount*3, 'float');
                        fread(fid, BinLinkCount*8, 'float');
                    case 12
                        fread(fid, BinNodeCount, 'float');
                        value(i,:) = fread(fid, BinNodeCount, 'float')'; % nodeHead
                        fread(fid, BinNodeCount*2, 'float');
                        fread(fid, BinLinkCount*8, 'float');
                    case 13
                        fread(fid, BinNodeCount*2, 'float');
                        value(i,:) = fread(fid, BinNodeCount, 'float')'; % nodePressure
                        fread(fid, BinNodeCount, 'float');
                        fread(fid, BinLinkCount*8, 'float');
                    case 14
                        fread(fid, BinNodeCount*3, 'float');
                        value(i,:) = fread(fid, BinNodeCount, 'float')'; % nodeQuality
                        fread(fid, BinLinkCount*8, 'float');
                    case 15
                        fread(fid, BinNodeCount*4, 'float');
                        value(i,:) = fread(fid, BinLinkCount, 'float')'; % linkFlow
                        fread(fid, BinLinkCount*7, 'float');
                    case 16
                        fread(fid, BinNodeCount*4+BinLinkCount, 'float');
                        value(i,:) = fread(fid, BinLinkCount, 'float')'; % linkVelocity
                        fread(fid, BinLinkCount*6, 'float');
                    case 17
                        fread(fid, BinNodeCount*4+BinLinkCount*2, 'float');
                        value(i,:) = fread(fid, BinLinkCount, 'float')'; % linkHeadloss
                        fread(fid, BinLinkCount*5, 'float');
                    case 18
                        fread(fid, BinNodeCount*4+BinLinkCount*3, 'float');
                        value(i,:) = fread(fid, BinLinkCount, 'float')'; % linkQuality
                        fread(fid, BinLinkCount*4, 'float');
                    case 19
                        % Status Code for Each Link
                        % 0 = closed (max. head exceeded)
                        % 1 = temporarily closed
                        % 2 = closed
                        % 3 = open
                        % 4 = active (partially open)
                        % 5 = open (max. flow exceeded)
                        % 6 = open (flow setting not met)
                        % 7 = open (pressure setting not met)
                        fread(fid, BinNodeCount*4+BinLinkCount*4, 'float');
                        value(i,:) = fread(fid, BinLinkCount, 'float')'; % linkStatus
                        fread(fid, BinLinkCount*3, 'float');
                    case 20
                        fread(fid, BinNodeCount*4+BinLinkCount*5, 'float');
                        value(i,:) = fread(fid, BinLinkCount, 'float')'; % linkSetting
                        fread(fid, BinLinkCount*2, 'float');
                    case 21
                        fread(fid, BinNodeCount*4+BinLinkCount*6, 'float');
                        value(i,:) = fread(fid, BinLinkCount, 'float')'; % linkReactionRate
                        fread(fid, BinLinkCount, 'float');
                    case 22
                        fread(fid, BinNodeCount*4+BinLinkCount*7, 'float');
                        value(i,:) = fread(fid, BinLinkCount, 'float')'; % linkFrictionFactor
                end
                if indParam>22
                    fread(fid, BinNodeCount*4+BinLinkCount*8, 'float');
                end
            end
        end
        switch indParam
            case 23
                value =fread(fid, 1, 'float')'; % AverageBulkReactionRate
            case 24
                fread(fid, 1, 'float');
                value =fread(fid, 1, 'float')'; % AverageWallReactionRate
            case 25
                fread(fid, 2, 'float');
                value =fread(fid, 1, 'float')'; % AverageTankReactionRate
            case 26
                fread(fid, 3, 'float');
                value =fread(fid, 1, 'float')'; % AverageSourceInflowRate
        end
    end
    warning('off'); try fclose(fid); catch e, end; try delete(binfile); catch e, end
    try delete(rptfile); catch e, end; warning('on'); 
end
function Errcode=addLinkWarnings(obj,typecode,newLink,toNode)
% Check if id new already exists
Nodes = obj.getBinNodesInfo;
Errcode=0;
if isempty(Nodes.BinNodeNameID), Errcode=-1; return; end
if ~ismember(toNode,Nodes.BinNodeNameID)
    warning('There is no node "%s" in the network.',toNode);
    Errcode=-1; return;
end
if isempty(strfind(0:8,typecode))
    warning('Wrong constant type.');
    Errcode=-1; return;
else
%     type_valv = obj.TYPELINK{typecode+1};
    if typecode>2, typecode=3; end
end
% Valve illegally connected to a tank or reservoir
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
if typecode==3
    if ismember(toNode,Nodes.BinNodeReservoirNameID) || ismember(toNode,Nodes.BinNodeTankNameID)
        Errcode=-1; warning('Valve "%s" illegally connected to a tank.',newLink);
        return;
    end
end
% Check if newLink already exists
Links = obj.getBinLinksInfo;
if ismember(newLink,Links.BinLinkNameID)
    Errcode=-1; warning('Link %s already exists.',newLink); return;
end

if typecode==2
    crvs = obj.getBinCurvesInfo;
    if isempty(char(crvs.BinCurveNameID))
        Errcode=-1; warning('No head curve supplied for pump %s.',newLink); return;
    end
end
end
function cnt=bracketsCheck(v)
    t =  regexp(v, '[(\w*)]','split');
    cnt=length(t(~cellfun('isempty',t)));
end
function setMSXOptions(obj,varargin)
solver=obj.getMSXSolver;
areaunits=obj.getMSXAreaUnits;
rateunits=obj.getMSXRateUnits;
rtol=obj.getMSXRtol;
atol=obj.getMSXAtol;
timestep=obj.getMSXTimeStep;
coupling=obj.getMSXCoupling;
compiler=obj.getMSXCompiler;

for i=1:(nargin/2)
    argument =lower(varargin{2*(i-1)+1});
    switch argument
        case 'areaunits' 
            areaunits=varargin{2*i};
        case 'rateunits'  
            rateunits=varargin{2*i};
        case 'solver'  
            solver=varargin{2*i};
        case 'timestep' 
            timestep=varargin{2*i};        
        case 'atol' 
            atol=varargin{2*i};
        case 'rtol' 
            rtol=varargin{2*i};            
        case 'coupling' 
            coupling=varargin{2*i};
        case 'compiler' 
            compiler=varargin{2*i};        
        otherwise
            warning('Invalid property found.');
            return
    end
end
                
[info,tline] = readAllFile(obj.MSXFile);
fid2 = writenewTemp(obj.MSXTempFile);
sect=0;
for t = 1:length(info)
    a = info{t};
    c = cell2mat(a);
    if isempty(a)
        % skip
    elseif isempty(c)
        % skip
    else
        u=1;
        while u < length(a)+1
            if strcmp(a{u},'[OPTIONS]')
                fprintf(fid2,'[OPTIONS]');
                sect=1;
                break;     
            elseif strcmp(a{u},'[SPECIES]')
                fprintf(fid2,'[SPECIES]');
                sect=0;
                break;
            end
            % section [OPTIONS]
            if (sect==1) 
                fprintf(fid2,['AREA_UNITS',blanks(5),'%s\n'],areaunits);
                fprintf(fid2,['RATE_UNITS',blanks(5),'%s\n'],rateunits);
                fprintf(fid2,['SOLVER',blanks(5),'%s\n'],solver);
                fprintf(fid2,['COUPLING',blanks(5),'%s\n'],coupling);
                fprintf(fid2,['COMPILER',blanks(5),'%s\n'],compiler);
                fprintf(fid2,['TIMESTEP',blanks(5),'%d\n'],timestep);
                fprintf(fid2,['RTOL',blanks(5),'%s\n'],rtol);
                fprintf(fid2,['ATOL',blanks(5),'%s\n\n'],atol);
                sect=2;
                break;
            elseif sect==0
                fprintf(fid2,tline{t});
                break;
            end
            u=u+1;
        end
    end
    if sect~=2
        fprintf(fid2,'\n');
    end
end
obj.unloadMSX;
obj.loadMSXFile(obj.MSXTempFile,1);
end
function indices = getLinkIndices(obj, varargin)
    indices = getIndices(obj.getLinkCount, varargin{1});
end
function indices = getNodeIndices(obj, varargin)
    indices = getIndices(obj.getNodeCount, varargin{1});
end
function indices = getIndices(cnt, varargin)
    if isempty(varargin{1})
        indices=1:cnt;
    elseif isempty(varargin{1}{1})
        indices=1:cnt;
    else
        indices=varargin{1}{1};
    end 
end
function value = getTimes(obj, r, atline, value)
    tmpt=[0 0];
    if sum(r==':')
        r=regexp(r,':','split');
        tmpt(1)=str2num(r{1});
        tmpt(2)=str2num(r{2});
        secnd=tmpt(1)*3600+tmpt(2)*60;
        if length(r)>2
            secnd=secnd+str2num(r{3}); 
        end
    else
        tmp=3600;
        switch upper(atline{end})
            case 'MIN'
                tmp=60;
            case 'MINUTES'
                tmp=60;
            case 'SECONDS'
                tmp=1/60;
            case 'SEC'
                tmp=1/60;
            case 'DAYS'
                tmp=24;
        end
        secnd=single(str2num(r)*tmp);
    end
    switch upper(atline{1})
        case 'DURATION'
            value.BinTimeSimulationDuration=secnd;
        case 'HYDRAULIC'
            value.BinTimeHydraulicStep=secnd;
        case 'QUALITY'
            value.BinTimeQualityStep=secnd;
        case 'PATTERN'
            if strcmpi(atline{2},'TIMESTEP')
                value.BinTimePatternStep=secnd;
            elseif strcmpi(atline{2},'START')
                value.BinTimePatternStart=secnd;
            end
        case 'REPORT'
            if strcmpi(atline{2},'TIMESTEP')
                value.BinTimeReportingStep=secnd;
            elseif strcmpi(atline{2},'START')
                value.BinTimeReportingStart=secnd;
            end
        case 'STATISTIC' 
            value.BinTimeStatisticsIndex=find((strcmpi(obj.TYPESTATS,atline{2})-1)>-1)-1;
            value.BinTimeStatistics=obj.TYPESTATS{value.BinTimeStatisticsIndex+1};
    end    
end
function value = getOptionsValues(obj, value, atline)
    switch upper(atline{1})
        case 'UNITS'
            value.BinLinkFlowUnits=atline{2};
        case 'HEADLOSS'
            value.BinOptionsHeadloss=atline{2};
        case 'PRESSURE'
            value.BinNodePressureUnits=atline{2};
        case 'SPECIFIC'
            value.BinOptionsSpecificGravity=str2num(atline{3});
        case 'VISCOSITY'
            value.BinOptionsViscosity=str2num(atline{2});
        case 'TRIALS'
            value.BinOptionsMaxTrials=str2num(atline{2});
        case 'ACCURACY'
            value.BinOptionsAccuracyValue=single(str2num(atline{2}));
        case 'UNBALANCED'
            value.BinOptionsUnbalanced= atline(2:end);
        case 'PATTERN'
            value.BinOptionsPattern=str2num(atline{2});
        case 'DEMAND'
            value.BinOptionsPatternDemandMultiplier=str2num(atline{3});
        case 'EMITTER'
            value.BinOptionsEmitterExponent=str2num(atline{3});
        case 'QUALITY'
            value.BinQualityType=atline{2};% Water quality analysis code (None:0/Chemical:1/Age:2/Trace:3)
            value.BinQualityCode=find((strcmpi(obj.TYPEQUALITY,atline{2})-1)>-1)-1;
            if isempty(value.BinQualityCode)
                value.BinQualityCode=1;
            end
            if length(atline)>2
                if value.BinQualityCode==3
                    value.BinQualityTraceNodeIndex=obj.getBinNodeIndex(atline{3});
                    value.BinQualityTraceNodeID=atline{3};
                else
                    value.BinQualityUnits=atline{3};
                end
            end
        case 'DIFFUSIVITY' 
            value.BinOptionsDiffusivity=str2num(atline{2});  
        case 'TOLERANCE' 
            value.BinOptionsQualityTolerance=single(str2num(atline{2})); 
    end
end
function [value, cont, sect, i,t,q,d] = getLV(tok,value,sect,tline,i,t,q,d)
    cont=1;
    if (tok(1) == '[')
           % [PIPES] section
        if strcmpi(tok(1:5),'[PIPE')
            sect=1;
            value.BinLinkPipeNameID={};
            value.BinLinkPipeIndex=[];
            value.BinLinkFromNode={};
            value.BinLinkToNode={};
            value.BinLinkPipeLengths=[];
            value.BinLinkPipeDiameters=[];
            value.BinLinkPipeRoughness=[];
            value.BinLinkPipeMinorLoss=[];
            cont=1;return;
            % [PUMPS] section
        elseif strcmpi(tok(1:5),'[PUMP')
            sect=2;
            value.BinLinkPumpNameID={};
            value.BinLinkPumpIndex=[];
            value.BinLinkPumpPatterns={};
            value.BinLinkPumpCurveNameID={};
            value.BinLinkPumpPower=[];
            value.BinLinkPumpNameIDPower={};
            cont=1;return;
            % [VALVES] section
        elseif strcmpi(tok(1:5),'[VALV')
            sect=3;
            value.BinLinkValveNameID={};
            value.BinLinkValveIndex=[];
            value.BinLinkValveDiameters=[];
            value.BinLinkValveType={};
            value.BinLinkValveSetting=[];
            value.BinLinkValveMinorLoss=[];                        
            cont=1;return;
            % [STATUS] section
        elseif strcmpi(tok(1:5),'[STAT')
            sect=4;
            value.BinLinkInitialStatus={};
            value.BinLinkInitialStatusNameID={};
            value.BinCountStatuslines=0;
            cont=1;return;                        
        elseif strcmpi(tok(1:5),'[REAC')
            sect=5;
            value.BinLinkGlobalBulkReactionCoeff=[];
            value.BinLinkGlobalWallReactionCoeff=[];
            value.BinLinkBulkReactionCoeff=[];
            value.BinLinkWallReactionCoeff=[];
            value.BinCountReactionlines=0;         
            value.BinLinkPipeCount = length(value.BinLinkPipeNameID);
            value.BinLinkPumpCount = length(value.BinLinkPumpNameID);
            value.BinLinkValveCount = length(value.BinLinkValveNameID);
            value.BinLinkCount = value.BinLinkPipeCount+value.BinLinkPumpCount+value.BinLinkValveCount;
            value.BinLinkNameID = [value.BinLinkPipeNameID value.BinLinkPumpNameID value.BinLinkValveNameID];
            cont=1;return;                        
            % [END]
        elseif strcmpi(tok(1:4),'[END')
            cont=0;return;
        else
            sect = 0;
            cont=1;return;
        end
    end
    clear atline;
    atline = checktlines(tline);
    if sect==0
        return;
        % Links
    elseif sect==1
        value.BinLinkPipeNameID{t}=atline{1};
        value.BinLinkPipeIndex(t)=t;
        value.BinLinkFromNode{t}=atline{2};
        value.BinLinkToNode{t}=atline{3};
        value.BinLinkPipeLengths(t)=str2num(atline{4});
        value.BinLinkPipeDiameters(t)=str2num(atline{5});
        value.BinLinkPipeRoughness(t)=str2num(atline{6});
        if length(atline)>6
            value.BinLinkPipeMinorLoss(t)=str2num(atline{7});
        end
        value.BinLinkType={};
        if length(atline)>7
            value.BinLinkPipeStatus{t}=atline{8};
        else
            value.BinLinkPipeStatus{t}='Open';
        end
        t=t+1;
    elseif sect==2
        value.BinLinkPumpNameID{q}=atline{1};
        value.BinLinkPumpIndex(q)=t;
        value.BinLinkFromNode{t}=atline{2};
        value.BinLinkToNode{t}=atline{3};
        if strcmp(regexp(tline,'\w*HEAD*\w','match'),'HEAD')
            value.BinLinkPumpCurveNameID{q}=atline{5};
        elseif strcmp(regexp(tline,'\w*POWER*\w','match'),'POWER')
            value.BinLinkPumpPower(q)=str2num(atline{5});
            value.BinLinkPumpNameIDPower{q}=atline{1};
        end
        if length(atline)>6
            value.BinLinkPumpPatterns{q}=atline{7};
        end
        t=t+1;
        q=q+1;
    elseif sect==3
        value.BinLinkValveNameID{i}=atline{1};
        value.BinLinkValveIndex(i)=t;
        value.BinLinkFromNode{t}=atline{2};
        value.BinLinkToNode{t}=atline{3};
        value.BinLinkValveDiameters(i)=str2num(atline{4});
        value.BinLinkValveType{i}=atline{5};
        value.BinLinkValveSetting(i)=str2num(atline{6});
        if length(atline)>6
            value.BinLinkValveMinorLoss(i)=str2num(atline{7});
        end
        t=t+1;
        i=i+1;
        % Status
    elseif sect==4
        value.BinLinkInitialStatus{d}=atline{2};
        value.BinLinkInitialStatusNameID{d}=atline{1};
        value.BinCountStatuslines=d;
        d=d+1;                    
        % Reactions
    elseif sect==5
        if strcmpi(atline{1},'GLOBAL') && strcmpi(atline{2},'BULK')
            value.BinLinkGlobalBulkReactionCoeff=str2num(atline{3});
        elseif strcmpi(atline{1},'GLOBAL') && strcmpi(atline{2},'WALL')
            value.BinLinkGlobalWallReactionCoeff=str2num(atline{3});
            value.BinLinkWallReactionCoeff=value.BinLinkGlobalWallReactionCoeff*ones(1,value.BinLinkCount);
            value.BinLinkBulkReactionCoeff=value.BinLinkGlobalBulkReactionCoeff*ones(1,value.BinLinkCount);
            value.BinLinkWallReactionCoeff(value.BinLinkPumpIndex)=0;
            value.BinLinkWallReactionCoeff(value.BinLinkValveIndex)=0;
            value.BinLinkBulkReactionCoeff(value.BinLinkPumpIndex)=0;
            value.BinLinkBulkReactionCoeff(value.BinLinkValveIndex)=0;
        end
        if strcmpi(atline{1},'BULK')
            LinkIndex = find(strcmpi(value.BinLinkNameID,atline{2}));
            value.BinLinkBulkReactionCoeff(LinkIndex)=str2num(atline{3});
        elseif strcmpi(atline{1},'WALL')
            LinkIndex = find(strcmpi(value.BinLinkNameID,atline{2}));
            value.BinLinkWallReactionCoeff(LinkIndex)=str2num(atline{3});
        end
        value.countReactionlines=d;
        d=d+1;
    end
end
function [status,result] = runMSXexe(obj, rptfile, varargin)
    inpfile=obj.BinTempfile;
    arch=computer('arch');
    if strcmp(arch,'win64') || strcmp(arch,'win32')
        [~,lpwd]=system(['cmd /c for %A in ("',obj.MSXLibEPANETPath,'") do @echo %~sA']);
        libPwd=regexp(lpwd,'\s','split');
        if nargin<3
            r = sprintf('%s\\epanetmsx.exe %s %s %s',libPwd{1},inpfile,obj.MSXTempFile,rptfile);
        else
            binfile=varargin{1};
            r = sprintf('%s\\epanetmsx.exe %s %s %s %s',libPwd{1},inpfile,obj.MSXTempFile,rptfile,binfile);
        end
    end
    if strcmpi(arch(1:4),'glnx')
        if nargin<3
            r = sprintf('%sepanetmsx %s %s %s',obj.MSXLibEPANETPath,inpfile,obj.MSXTempFile,rptfile);
        else
           binfile=varargin{1};
            r = sprintf('%sepanetmsx %s %s %s %s',obj.MSXLibEPANETPath,inpfile,obj.MSXTempFile,rptfile,binfile);
        end
    end
    [status,result] = system(r);
end
% function value = readMSXBinaryFile(binfile)
%     fid = fopen(binfile, 'r');
%     if fid~=-1
%         data = fread(fid,'int32');
%         fclose(fid);
%         value.BinMSXNumberReportingPeriods = data(end-2);
%         clear data;
%         fid1 = fopen(binfile, 'r');
% 
%         % Seek to the 10th byte ('J'), read 5
%         fseek(fid1, 0, 'bof');
%         value.BinMSXmagicnumber=fread(fid1, 1, 'uint32');
%         value.BinMSXLibMSX=fread(fid1, 1, 'uint32');
%         value.BinMSXNumberNodes=fread(fid1, 1, 'uint32');
%         value.BinMSXNumberLinks=fread(fid1, 1, 'uint32');
%         value.BinMSXSpeciesCount=fread(fid1, 1, 'uint32');
%         value.BinMSXReportingTimeStepSec=fread(fid1, 1, 'uint32');
% 
%         for i=1:value.BinMSXSpeciesCount
%             value.BinMSXSpeciesNumberChar(i)=fread(fid1, 1, 'uint32');
%             value.BinMSXSpeciesNameID{i}=fread(fid1, value.BinMSXSpeciesNumberChar(i), '*char')';
%         end  
%         for i=1:value.BinMSXSpeciesCount
%             value.BinMSXSpeciesUnits{i}=fread(fid1, 15, '*char')';
%         end
%         value.BinMSXSpeciesUnits = regexprep(value.BinMSXSpeciesUnits,'[^\w'']','');
% 
%         fread(fid1, 32, 'float');
%         for i=1:value.BinMSXReportingTimeStepSec/3600:value.BinMSXNumberReportingPeriods
%             for s=1:value.BinMSXSpeciesCount
%                 for u=1:value.BinMSXNumberNodes
%                     value.BinMSXNodesQuality{s}(i,u) = fread(fid1, 1, 'float')'; %%%% edit here
%                 end
%             end
%         end
%         for i=1:value.BinMSXReportingTimeStepSec/3600:value.BinMSXNumberReportingPeriods
%             for s=1:value.BinMSXSpeciesCount
%                 for u=1:value.BinMSXNumberLinks
%                     value.BinMSXLinksQuality{s}(i,:) = fread(fid1, 1, 'float')';
%                 end
%             end
%         end        
%     end
% end
function value = readEpanetBin(fid, binfile, rptfile, varargin)
    value=[]; 
    if fid~=-1
        data = fread(fid,'int32');
        value.BinNumberReportingPeriods = data(end-2);
        clear data;
        % Beginning of file
        fseek(fid, 0, 'bof');
        value.Binmagicnumber=fread(fid, 1, 'uint32');
        value.BinLibEPANET=fread(fid, 1, 'uint32');
        value.BinNumberNodes=fread(fid, 1, 'uint32');
        value.BinNumberReservoirsTanks=fread(fid, 1, 'uint32');
        value.BinNumberLinks=fread(fid, 1, 'uint32');
        value.BinNumberPumps=fread(fid, 1, 'uint32');
        value.BinNumberValves=fread(fid, 1, 'uint32');
        value.BinWaterQualityOption=fread(fid, 1, 'uint32');
        value.BinIndexNodeSourceTracing=fread(fid, 1, 'uint32');
        value.BinFlowUnitsOption=fread(fid, 1, 'uint32');
        value.BinPressureUnitsOption=fread(fid, 1, 'uint32');
        value.BinTimeStatisticsFlag=fread(fid, 1, 'uint32');
        value.BinReportingStartTimeSec=fread(fid, 1, 'uint32');
        value.BinReportingTimeStepSec=fread(fid, 1, 'uint32');
        value.BinSimulationDurationSec=fread(fid, 1, 'uint32');
        value.BinProblemTitle1=fread(fid, 80, '*char')';
        value.BinProblemTitle2=fread(fid, 80, '*char')';
        value.BinProblemTitle3=fread(fid, 80, '*char')';
        value.BinNameInputFile=fread(fid, 260, '*char')';
        value.BinNameReportFile=fread(fid, 260, '*char')';
        value.BinNameChemical=regexprep(fread(fid, 16, '*char')','[^\w'']','');
        value.BinChemicalConcentrationUnits=regexprep(fread(fid, 32, '*char')','[^\w'']',''); 
        fread(fid, 4, 'uint32');
        for i=1:value.BinNumberNodes
            value.BinIDLabelEachNode{i}=fread(fid, 32, '*char')'; % error NODES*32
            value.BinIDLabelEachNode{i}=value.BinIDLabelEachNode{i}(find(value.BinIDLabelEachNode{i}));
        end
        for i=1:value.BinNumberLinks
            value.BinIDLabelEachLink{i}=fread(fid, 32, '*char')';  % error LINKS*32
            value.BinIDLabelEachLink{i}=value.BinIDLabelEachLink{i}(find(value.BinIDLabelEachLink{i}));
        end
        value.BinIndexStartNodeEachLink=fread(fid, value.BinNumberLinks, 'uint32')';
        value.BinIndexEndNodeEachLink=fread(fid, value.BinNumberLinks, 'uint32')';
        value.BinTypeCodeEachLink=fread(fid, value.BinNumberLinks, 'uint32')';
        value.BinNodeIndexEachReservoirsTank=fread(fid, value.BinNumberReservoirsTanks, 'uint32')'; % error
        value.BinCrossSectionalAreaEachTank=fread(fid, value.BinNumberReservoirsTanks, 'float')';
        value.BinElevationEachNode=fread(fid, value.BinNumberNodes, 'float')';
        value.BinLengthEachLink=fread(fid, value.BinNumberLinks, 'float')';
        value.BinDiameterEachLink=fread(fid, value.BinNumberLinks, 'float')';

        value.BinPumpIndexListLinks=fread(fid, value.BinNumberPumps, 'float')';
        value.BinPumpUtilization=fread(fid, value.BinNumberPumps, 'float')';
        value.BinAverageEfficiency=fread(fid, value.BinNumberPumps, 'float')';
        value.BinAverageKwattsOrMillionGallons=fread(fid, value.BinNumberPumps, 'float')';
        value.BinAverageKwatts=fread(fid, value.BinNumberPumps, 'float')';
        value.BinPeakKwatts=fread(fid, value.BinNumberPumps, 'float')';
        value.BinAverageCostPerDay=fread(fid, value.BinNumberPumps, 'float')';

        fread(fid, 1, 'float');

        for i=1:value.BinNumberReportingPeriods
            value.BinnodeDemand(i,:)         = fread(fid, value.BinNumberNodes, 'float')';
            value.BinnodeHead(i,:)           = fread(fid, value.BinNumberNodes, 'float')';
            value.BinnodePressure(i,:)       = fread(fid, value.BinNumberNodes, 'float')';
            value.BinnodeQuality(i,:)        = fread(fid, value.BinNumberNodes, 'float')';
            value.BinlinkFlow(i,:)           = fread(fid, value.BinNumberLinks, 'float')';
            value.BinlinkVelocity(i,:)       = fread(fid, value.BinNumberLinks, 'float')';
            value.BinlinkHeadloss(i,:)       = fread(fid, value.BinNumberLinks, 'float')';
            value.BinlinkQuality(i,:)        = fread(fid, value.BinNumberLinks, 'float')';
            value.BinlinkStatus(i,:)         = fread(fid, value.BinNumberLinks, 'float')';
            value.BinlinkSetting(i,:)        = fread(fid, value.BinNumberLinks, 'float')';
            value.BinlinkReactionRate(i,:)   = fread(fid, value.BinNumberLinks, 'float')';
            value.BinlinkFrictionFactor(i,:) = fread(fid, value.BinNumberLinks, 'float')';
        end
        value.BinAverageBulkReactionRate=fread(fid, 1, 'float')';
        value.BinAverageWallReactionRate=fread(fid, 1, 'float')';
        value.BinAverageTankReactionRate=fread(fid, 1, 'float')';
        value.BinAverageSourceInflowRate=fread(fid, 1, 'float')';
        value.BinNumberReportingPeriods2=fread(fid, 1, 'uint32')';
        value.BinWarningFlag=fread(fid, 1, 'uint32')';
        value.BinMagicNumber=fread(fid, 1, 'uint32')';
    end
    if ~isempty(varargin)
        v.Time = (0:value.BinReportingTimeStepSec:value.BinSimulationDurationSec)';
        v.Pressure = value.BinnodePressure;
        v.Demand = value.BinnodeDemand;
        v.Head = value.BinnodeHead;
        v.NodeQuality = value.BinnodeQuality;
        v.Flow = value.BinlinkFlow;
        v.Velocity = value.BinlinkVelocity;
        v.HeadLoss = value.BinlinkHeadloss;
        v.Status = value.BinlinkStatus;
        v.Setting = value.BinlinkSetting;
        v.ReactionRate = value.BinlinkReactionRate;
        v.FrictionFactor = value.BinlinkFrictionFactor;
        v.LinkQuality = value.BinlinkQuality;
        clear value;
        value=v;
    end
    warning('off'); try fclose(fid); catch e, end; try delete(binfile); catch e, end
    try delete(rptfile); catch e, end; warning('on'); 
end
function [inpfile, rptfile, binfile]= createTempfiles(BinTempfile)
    [tmppath,tempfile]=fileparts(BinTempfile);
    [~,mm]=system(['cmd /c for %A in ("',tmppath,'") do @echo %~sA']);
    mmPwd=regexp(mm,'\s','split');
    inpfile=[mmPwd{1},'/',tempfile,'.inp'];
    uuID = char(java.util.UUID.randomUUID);
    rptfile=['@#',uuID,'.txt'];
    binfile=['@#',uuID,'.bin'];
end
function typecode = getTypeLink(type)
    ch_ = find(type=='_');
    if ~isempty(ch_)
        type=type(ch_+1:end);
    end
    switch upper(type)
        case 'CVPIPE'   
            typecode=0;
        case 'PIPE'   
            typecode=1;
        case 'PUMP'
            typecode=2;
        case 'PRV'
            typecode=3;
        case 'PSV'
            typecode=4;
        case 'PBV'   
            typecode=5;
        case 'FCV'
            typecode=6;
        case 'TCV'     
            typecode=7;
        case 'GPV'
            typecode=8;
        otherwise
            typecode=-1;
    end 
end
function fid = writenewTemp(Tempfile)
    fid=fopen(Tempfile,'w');
    while fid==-1, fid=fopen(Tempfile,'w'); end
end
function value = NodeCoords(obj, varargin)
        if strcmpi(varargin,'Bin')
            BinNodeName = obj.getBinNodeNameID;
            BinLinkName = obj.getBinLinkNameID;
            linkcount =  length(BinLinkName.BinLinkNameID);
            nodecount = length(BinNodeName.BinNodeNameID);
        else
            nodecount=obj.getNodeCount;
            linkcount=obj.getLinkCount;
        end
        vx = NaN(nodecount,1);
        vy = NaN(nodecount,1);
        vertx = cell(linkcount,1);
        verty = cell(linkcount,1);
        nvert = zeros(linkcount,1);
        % Open epanet input file
        [~,info] = obj.readInpFile;
        sect = 0;
        for h=1:length(info)
            tline = info{h};
            if ~ischar(tline),   break,   end
            % Get first token in the line
            tok = strtok(tline);
            % Skip blank Clines and comments
            if isempty(tok), continue, end
            if (tok(1) == ';'), continue, end
            if (tok(1) == '[')
                
                % [COORDINATES] section
                if strcmpi(tok(1:5),'[COOR')
                    if strcmpi(varargin,'Bin');
                        sect = 17; continue;
                    end
                % [VERTICES] section
                elseif strcmpi(tok(1:5),'[VERT')
                    sect = 18; continue;
                % [END]
                elseif strcmpi(tok(1:4),'[END')
                    break;
                else
                    sect = 0; continue;
                end
            end
            if sect==0
                continue;

            % Coordinates
            elseif sect==17
                A = textscan(tline,'%s %f %f');
                mm = strcmp(A{1},BinNodeName.BinNodeNameID);
                index=strfind(mm,1);
                if isempty(index), continue; end
                vx(index) = A{2};
                vy(index) = A{3};

            % Vertices
            elseif sect==18
                A = textscan(tline,'%s %f %f');
                if strcmpi(varargin,'Bin');
                    index =  find(strcmp(BinLinkName.BinLinkNameID,A{1}));
                    if isempty(index), continue; end
                else
                    [~,index] = ENgetlinkindex(char(A{1}),obj.LibEPANET);
                    if index==0, continue; end
                end
                nvert(index) = nvert(index) + 1;
                vertx{index}(nvert(index)) = A{2};
                verty{index}(nvert(index)) = A{3};
            end
        end
    try
        if strcmpi(varargin,'Bin'), varargin={}; end
        indices = getNodeIndices(obj,varargin);j=1;
        for i=indices
            [obj.Errcode,vx(j),vy(j)]=ENgetcoord(i,obj.LibEPANET); j=j+1;
        end
    catch
    end
    if isempty(varargin) 
        value{1} = vx;
        value{2} = vy;
        value{3} = vertx;
        value{4} = verty;
    else
        if ~strcmpi(varargin,'Bin')
            if obj.Errcode, error(obj.getError(obj.Errcode)), return; end   
            value = [vx(1:length(varargin{1})) vy(1:length(varargin{1}))];
        end
    end
end
function atline = checktlines(tline)
    atline='';
    a = regexp(tline, '\s*','split');uu=1;
    for tt=1:length(a)
        if isempty(a{tt})
            %skip
        elseif sum(a{tt}==';')
            %skip
            if tt>1,  break; end
        else
            atline{uu}=a{tt}; uu=uu+1;
        end
    end
end