Adafruit MicroPython Tool (ampy) - Utility to interact with a MicroPython board over a serial connection.
Ampy is meant to be a simple command line tool to manipulate files and run code on a MicroPython board over its serial connection. With ampy you can send files from your computer to a MicroPython board's file system, download files from a board to your computer, and even send a Python script to a board to be executed.
Note that ampy by design is meant to be simple and does not support advanced interaction like a shell or terminal to send input to a board. Check out other MicroPython tools like rshell or mpfshell for more advanced interaction with boards.
You can use ampy with either Python 2.7.x or 3.x and can install it easily from Python's package index. In a terminal run the following command (assuming Python 3):
pip3 install adafruit-ampy
Note on some Linux and Mac OSX systems you might need to run as root with sudo:
sudo pip3 install adafruit-ampy
If you don't have Python 3 then try using Python 2 with:
pip install adafruit-ampy
Or even in some cases (Mac OSX homebrew):
pip2 install adafruit-ampy
Once installed verify you can run the ampy program and get help output:
You should see usage information displayed like below:
Usage: ampy [OPTIONS] COMMAND [ARGS]... ampy - Adafruit MicroPython Tool Ampy is a tool to control MicroPython boards over a serial connection. Using ampy you can manipulate files on the board's internal filesystem and even run scripts. Options: -p, --port PORT Name of serial port for connected board. [required] -b, --baud BAUD Baud rate for the serial connection. (default 115200) --help Show this message and exit. Commands: get Retrieve a file from the board. ls List contents of a directory on the board. put Put a file on the board. rm Remove a file from the board. run Run a script and print its output.
If you'd like to install from the Github source then use the standard Python setup.py install (or develop mode):
python3 setup.py install
Note to run the unit tests on Python 2 you must install the mock library:
pip install mock
Ampy is made to talk to a MicroPython board over its serial connection. You will need your board connected and any drivers to access it serial port installed. Then for example to list the files on the board run a command like:
ampy --port /dev/tty.SLAB_USBtoUART ls
You should see a list of files on the board's root directory printed to the terminal. Note that you'll need to change the port parameter to the name or path to the serial port that the MicroPython board is connected to.
Other commands are available, run ampy with --help to see more information:
Each subcommand has its own help, for example to see help for the ls command run (note you unfortunately must have a board connected and serial port specified):
ampy --port /dev/tty.SLAB_USBtoUART ls --help
For convenience you can set an
AMPY_PORT environment variable which will be used
if the port parameter is not specified. For example on Linux or OSX:
export AMPY_PORT=/dev/tty.SLAB_USBtoUART ampy ls
Or on Windows (untested) try the SET command:
set AMPY_PORT=COM4 ampy ls
Similarly, you can set
AMPY_DELAY to control your baud rate and
the delay before entering RAW MODE.
To set these variables automatically each time you run
ampy, copy them into a
# Example .ampy file # Please fill in your own port, baud rate, and delay AMPY_PORT=/dev/cu.wchusbserial1410 AMPY_BAUD=115200 # Fix for macOS users' "Could not enter raw repl"; try 2.0 and lower from there: AMPY_DELAY=0.5
You can put the
.ampy file in your working directory, one of its parents, or in
your home directory.