macros_shell_command.cfg

# git status shell commands
[gcode_shell_command git_status_sh]
command: sh /home/pi/git_status_config.sh
timeout: 60.
verbose: True
[gcode_macro GIT_STATUS]
description: git status ~/klipper_config/ 
gcode:
    RUN_SHELL_COMMAND CMD=git_status_sh

[gcode_shell_command PiShutdown_sh]
command: sh /home/pi/PiShutdown.sh
timeout: 60.
verbose: True
[gcode_macro PISHUTDOWN]
description: PISHUTDOWN
gcode:
    {% if printer.extruder.temperature < 40.0 %}
        M117 PISHUTDOWN
        RUN_SHELL_COMMAND CMD=PiShutdown_sh
    {% else %}
        M117 Error: PISHUTDOWN not running, because extruder.temperature not lower 40.0
    {% endif %}
    
[gcode_macro SHUTDOWN]
description: SHUTDOWN
gcode:
    {% if printer.extruder.temperature < 40.0 %}
        M117 SHUTDOWN
        {action_call_remote_method("shutdown_machine")}
    {% else %}
        M117 Error: SHUTDOWN not running, because extruder.temperature not lower 40.0
    {% endif %}  
[gcode_macro REBOOT]
description: REBOOT
gcode:
    {% if printer.extruder.temperature < 40.0 %}
        M117 REBOOT
        {action_call_remote_method("reboot_machine")}
    {% else %}
        M117 Error: REBOOT not running, because extruder.temperature not lower 40.0
    {% endif %}

# git pull shell commands
[gcode_shell_command git_pull_sh]
command: sh /home/pi/git_pull_config.sh
timeout: 60.
verbose: True
[gcode_macro GIT_PULL]
description: git pull ~/klipper_config/ 
gcode:
    RUN_SHELL_COMMAND CMD=git_pull_sh

# git push shell commands
[gcode_shell_command git_push_sh]
command: sh /home/pi/git_push_config.sh
timeout: 60.
verbose: True
[gcode_macro GIT_PUSH]
description: git push ~/klipper_config/ 
gcode:
    {% set COMMIT = params.COMMIT|default("Update_directFromPrinter")|string %}
    { action_respond_info("%s" % (COMMIT)) }
    RUN_SHELL_COMMAND CMD=git_push_sh PARAMS="{COMMIT}"

# test Script 
[gcode_shell_command say_hi_sh]
command: sh /home/pi/say_hi.sh
timeout: 20.
verbose: True
[gcode_macro machine_stop]
gcode:
    M117 SHUTDOWN
    {action_call_remote_method("shutdown_machine")}

    #{% set COMMIT = params.COMMIT|default("my Backup")|string %}
    #{ action_respond_info("%s" % (COMMIT)) }
    #RUN_SHELL_COMMAND CMD=say_hi_sh PARAMS="{COMMIT}"