Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

v0.1: Antenna should be covered in solder mask #2

Closed
al177 opened this issue Dec 30, 2015 · 1 comment
Closed

v0.1: Antenna should be covered in solder mask #2

al177 opened this issue Dec 30, 2015 · 1 comment

Comments

@al177
Copy link
Owner

al177 commented Dec 30, 2015

The PCB trace inverted F antenna KiCad library has no solder mask on top of the antenna. Per the TI DN007 appnote describing the design, the thickness should be 1oz copper. Without soldermask the antenna is covered in plating, increasing the thickness beyond the 1oz copper layer. Additionally, the mask protects from direct contact with other metal objects. The appnote does not specifically mention putting mask over the antenna, but the example photos show green mask over the antenna.

The antenna performance is decent on the v0.1 protos, which may be due to a consistent ENIG finish used by the board house. But if the board were to be built using HASL the thickness and consistency may change enough to detune the antenna.

Fix is to clone the symbol to the project library and add a mask.
@al177
Copy link
Owner Author

al177 commented Jan 2, 2016

Fixed in v0.2. Updated the antenna part to put mask on all the copper traces.

@al177 al177 closed this as completed Jan 2, 2016
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
1 participant
@al177