The IscIndMachine
class provides access to an IPSA induction machine, to set and get data values and to retrieve load flow and fault level results.
.. tabularcolumns:: |\Y{0.15}|\Y{0.25}|\Y{0.6}|IscIndMachine Field Values
Type | Field Name | Description |
---|---|---|
Integer | FromUID | Gets the unique ID for busbar. |
String | BusName | Gets the busbar name. |
String | Name | Gets the induction machine name. |
Integer | Status | Status:
|
Float | MechPowerMW | Mechanical power output of motor. Use negative values for induction generators. |
Float | SlipPC | Slip in %. |
Float | MagnetXPU | Magnetising reactance. |
Float | StatorRPU | Stator resistance. |
Float | StatorXPU | Stator reactance. |
Integer | Model | The motor model used:
|
Float | RotorRPU | Inner cage or running rotor resistance. |
Float | RotorXPU | Inner cage or running rotor reactance. |
Float | StandRPU | Outer cage or standstill rotor resistance. |
Float | StartXPU | Outer cage or standstill rotor reactance. |
Float | TSlipB | Load torque-speed coefficient B. |
Float | TSlipC | Load torque-speed squared coefficient C. |
Float | InertiaSec | Inertia constant in kWs / kVA. |
Float | DropoffVPU | If the voltage falls below this value disconnection will begin. |
Float | DropPickUpDelaySec | The time taken to disconnect the machine. |
Float | LockTimeSec | If a machine is disconnected for this length of time it will not be reconnected. |
Float | UnderspeedPU | Under speed setting in per unit. |
Float | OverspeedPU | Overspeed setting in per unit. |
Float | PickUpTimeSec | The time taken to reconnect the machine. |
Float | PickUpVoltagePU | If the voltage in per unit rises above this value reconnection will begin. |
Float | SwitchOut1Sec | Time for the first switch-out operation. If the machine is already switched out, leave this entry blank. |
Float | SwitchIn1Sec | Time for first switch-in. |
Float | SwitchOut2Sec | Time for second switch-out. |
Float | SwitchIn2Sec | Time for second switch-in. |
Integer | MaxSwitchOp | Maximum number of automatic switching operations before the machine is locked out. |
Integer | DFFeedBusbar | Feed busbar UID for doubly-fed model. |
Float | DFPowerFactor | Power factor for doubly-fed model. |
Boolean | DFExportQ | If True then reactive power is exported by the machine, else it is imported. |
Integer | DFRotorReferenceFrame | Rotor reference frame, either:
|
Integer | DFFaultSwitchMode | How the DFIG behaves when a fault is detected:
|
Float | DFFaultRotorCurrentLimit | When DFIG rotor current exceeds this value the DFIG alters its behaviour as determined by the fault switch mode. |
Float | DFFaultCrowbarLimit | The effect of this parameter is determined by the fault switch mode. See the online help manual for details. |
Float | DFFaultCrowbarResPU | Crowbar fault resistance (per unit on system base and rotor voltage base). |
String | DbType | Gets the database type. |
Integer | DbPar | Gets the number of motors in parallel. |
Integer | ControlModelType | Gets the Dynamic Model type.
|
Float | RatedMW | The rated MW power of the machine. Only used in IEC60909 fault analysis. |
Float | RatedMVA | The rated MVA power of the machine. Only used in IEC60909 fault analysis. |
Integer | PolePairs | The number of pole pairs of the machine. Only used in IEC60909 fault analysis. |
String | ControlPluginID | Gets the control plugin ID. |
.. autoclass:: ipsa.IscIndMachine :members: