mem.rs

//! Raw low-level manipulations of bz streams.

use std::error;
use std::fmt;
use std::marker;
use std::mem;
use std::slice;

use libc::{c_int, c_uint};

use {ffi, Compression};

/// Representation of an in-memory compression stream.
///
/// An instance of `Compress` can be used to compress a stream of bz2 data.
pub struct Compress {
    inner: Stream<DirCompress>,
}

/// Representation of an in-memory decompression stream.
///
/// An instance of `Decompress` can be used to inflate a stream of bz2-encoded
/// data.
pub struct Decompress {
    inner: Stream<DirDecompress>,
}

struct Stream<D: Direction> {
    // libbz2 requires a stable address for this stream.
    raw: Box<ffi::bz_stream>,
    _marker: marker::PhantomData<D>,
}

unsafe impl<D: Direction> Send for Stream<D> {}
unsafe impl<D: Direction> Sync for Stream<D> {}

trait Direction {
    unsafe fn destroy(stream: *mut ffi::bz_stream) -> c_int;
}

enum DirCompress {}
enum DirDecompress {}

/// Possible actions to take on compression.
#[derive(PartialEq, Eq, Copy, Debug, Clone)]
pub enum Action {
    /// Normal compression.
    Run = ffi::BZ_RUN as isize,
    /// Request that the current compression block is terminate.
    Flush = ffi::BZ_FLUSH as isize,
    /// Request that the compression stream be finalized.
    Finish = ffi::BZ_FINISH as isize,
}

/// Result of compression or decompression
#[derive(PartialEq, Eq, Copy, Debug, Clone)]
pub enum Status {
    /// Decompression went fine, nothing much to report.
    Ok,

    /// The Flush action on a compression went ok.
    FlushOk,

    /// THe Run action on compression went ok.
    RunOk,

    /// The Finish action on compression went ok.
    FinishOk,

    /// The stream's end has been met, meaning that no more data can be input.
    StreamEnd,

    /// There was insufficient memory in the input or output buffer to complete
    /// the request, but otherwise everything went normally.
    MemNeeded,
}

/// Fatal errors encountered when compressing/decompressing bytes.
///
/// These errors indicate that progress could not be made in any form due to
/// input or output parameters.
#[derive(PartialEq, Eq, Copy, Debug, Clone)]
pub enum Error {
    /// The sequence of operations called on a decompression/compression stream
    /// were invalid. See methods for details.
    Sequence,

    /// The data being decompressed was invalid, or it was not a valid bz2
    /// stream.
    Data,

    /// The magic bz2 header wasn't present when decompressing.
    DataMagic,

    /// The parameters to this function were invalid.
    Param,
}

impl Compress {
    /// Creates a new stream prepared for compression.
    ///
    /// The `work_factor` parameter controls how the compression phase behaves
    /// when presented with worst case, highly repetitive, input data. If
    /// compression runs into difficulties caused by repetitive data, the
    /// library switches from the standard sorting algorithm to a fallback
    /// algorithm. The fallback is slower than the standard algorithm by perhaps
    /// a factor of three, but always behaves reasonably, no matter how bad the
    /// input.
    ///
    /// Lower values of `work_factor` reduce the amount of effort the standard
    /// algorithm will expend before resorting to the fallback. You should set
    /// this parameter carefully; too low, and many inputs will be handled by
    /// the fallback algorithm and so compress rather slowly, too high, and your
    /// average-to-worst case compression times can become very large. The
    /// default value of 30 gives reasonable behaviour over a wide range of
    /// circumstances.
    ///
    /// Allowable values range from 0 to 250 inclusive. 0 is a special case,
    /// equivalent to using the default value of 30.
    pub fn new(lvl: Compression, work_factor: u32) -> Compress {
        unsafe {
            let mut raw = Box::new(mem::zeroed());
            assert_eq!(
                ffi::BZ2_bzCompressInit(&mut *raw, lvl.level() as c_int, 0, work_factor as c_int),
                0
            );
            Compress {
                inner: Stream {
                    raw: raw,
                    _marker: marker::PhantomData,
                },
            }
        }
    }

    /// Compress a block of input into a block of output.
    ///
    /// If anything other than BZ_OK is seen, `Err` is returned. The action
    /// given must be one of Run, Flush or Finish.
    pub fn compress(
        &mut self,
        input: &[u8],
        output: &mut [u8],
        action: Action,
    ) -> Result<Status, Error> {
        // apparently 0-length compression requests which don't actually make
        // any progress are returned as BZ_PARAM_ERROR, which we don't want, to
        // just translate to a success here.
        if input.len() == 0 && action == Action::Run {
            return Ok(Status::RunOk);
        }
        self.inner.raw.next_in = input.as_ptr() as *mut _;
        self.inner.raw.avail_in = input.len().min(c_uint::MAX as usize) as c_uint;
        self.inner.raw.next_out = output.as_mut_ptr() as *mut _;
        self.inner.raw.avail_out = output.len().min(c_uint::MAX as usize) as c_uint;
        unsafe {
            match ffi::BZ2_bzCompress(&mut *self.inner.raw, action as c_int) {
                ffi::BZ_RUN_OK => Ok(Status::RunOk),
                ffi::BZ_FLUSH_OK => Ok(Status::FlushOk),
                ffi::BZ_FINISH_OK => Ok(Status::FinishOk),
                ffi::BZ_STREAM_END => Ok(Status::StreamEnd),
                ffi::BZ_SEQUENCE_ERROR => Err(Error::Sequence),
                c => panic!("unknown return status: {}", c),
            }
        }
    }

    /// Compress a block of input into an output vector.
    ///
    /// This function will not grow `output`, but it will fill the space after
    /// its current length up to its capacity. The length of the vector will be
    /// adjusted appropriately.
    pub fn compress_vec(
        &mut self,
        input: &[u8],
        output: &mut Vec<u8>,
        action: Action,
    ) -> Result<Status, Error> {
        let cap = output.capacity();
        let len = output.len();

        unsafe {
            let before = self.total_out();
            let ret = {
                let ptr = output.as_mut_ptr().offset(len as isize);
                let out = slice::from_raw_parts_mut(ptr, cap - len);
                self.compress(input, out, action)
            };
            output.set_len((self.total_out() - before) as usize + len);
            return ret;
        }
    }

    /// Total number of bytes processed as input
    pub fn total_in(&self) -> u64 {
        self.inner.total_in()
    }

    /// Total number of bytes processed as output
    pub fn total_out(&self) -> u64 {
        self.inner.total_out()
    }
}

impl Decompress {
    /// Creates a new stream prepared for decompression.
    ///
    /// If `small` is true, then the library will use an alternative
    /// decompression algorithm which uses less memory but at the cost of
    /// decompressing more slowly (roughly speaking, half the speed, but the
    /// maximum memory requirement drops to around 2300k). See
    pub fn new(small: bool) -> Decompress {
        unsafe {
            let mut raw = Box::new(mem::zeroed());
            assert_eq!(ffi::BZ2_bzDecompressInit(&mut *raw, 0, small as c_int), 0);
            Decompress {
                inner: Stream {
                    raw: raw,
                    _marker: marker::PhantomData,
                },
            }
        }
    }

    /// Decompress a block of input into a block of output.
    pub fn decompress(&mut self, input: &[u8], output: &mut [u8]) -> Result<Status, Error> {
        self.inner.raw.next_in = input.as_ptr() as *mut _;
        self.inner.raw.avail_in = input.len().min(c_uint::MAX as usize) as c_uint;
        self.inner.raw.next_out = output.as_mut_ptr() as *mut _;
        self.inner.raw.avail_out = output.len().min(c_uint::MAX as usize) as c_uint;
        unsafe {
            match ffi::BZ2_bzDecompress(&mut *self.inner.raw) {
                ffi::BZ_OK => Ok(Status::Ok),
                ffi::BZ_MEM_ERROR => Ok(Status::MemNeeded),
                ffi::BZ_STREAM_END => Ok(Status::StreamEnd),
                ffi::BZ_PARAM_ERROR => Err(Error::Param),
                ffi::BZ_DATA_ERROR => Err(Error::Data),
                ffi::BZ_DATA_ERROR_MAGIC => Err(Error::DataMagic),
                ffi::BZ_SEQUENCE_ERROR => Err(Error::Sequence),
                c => panic!("wut: {}", c),
            }
        }
    }

    /// Decompress a block of input into an output vector.
    ///
    /// This function will not grow `output`, but it will fill the space after
    /// its current length up to its capacity. The length of the vector will be
    /// adjusted appropriately.
    pub fn decompress_vec(&mut self, input: &[u8], output: &mut Vec<u8>) -> Result<Status, Error> {
        let cap = output.capacity();
        let len = output.len();

        unsafe {
            let before = self.total_out();
            let ret = {
                let ptr = output.as_mut_ptr().offset(len as isize);
                let out = slice::from_raw_parts_mut(ptr, cap - len);
                self.decompress(input, out)
            };
            output.set_len((self.total_out() - before) as usize + len);
            return ret;
        }
    }

    /// Total number of bytes processed as input
    pub fn total_in(&self) -> u64 {
        self.inner.total_in()
    }

    /// Total number of bytes processed as output
    pub fn total_out(&self) -> u64 {
        self.inner.total_out()
    }
}

impl<D: Direction> Stream<D> {
    fn total_in(&self) -> u64 {
        (self.raw.total_in_lo32 as u64) | ((self.raw.total_in_hi32 as u64) << 32)
    }

    fn total_out(&self) -> u64 {
        (self.raw.total_out_lo32 as u64) | ((self.raw.total_out_hi32 as u64) << 32)
    }
}

impl error::Error for Error {}

impl fmt::Display for Error {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        let description = match self {
            Error::Sequence => "bzip2: sequence of operations invalid",
            Error::Data => "bzip2: invalid data",
            Error::DataMagic => "bzip2: bz2 header missing",
            Error::Param => "bzip2: invalid parameters",
        };
        f.write_str(description)
    }
}

impl From<Error> for std::io::Error {
    fn from(data: Error) -> std::io::Error {
        std::io::Error::new(std::io::ErrorKind::Other, data)
    }
}

impl Direction for DirCompress {
    unsafe fn destroy(stream: *mut ffi::bz_stream) -> c_int {
        ffi::BZ2_bzCompressEnd(stream)
    }
}
impl Direction for DirDecompress {
    unsafe fn destroy(stream: *mut ffi::bz_stream) -> c_int {
        ffi::BZ2_bzDecompressEnd(stream)
    }
}

impl<D: Direction> Drop for Stream<D> {
    fn drop(&mut self) {
        unsafe {
            let _ = D::destroy(&mut *self.raw);
        }
    }
}