Vendor: TheRouter
Attribute: therouter_ingress_cir
Attribute: therouter_egress_cir
These attributes specify subscriber ingress and egress bandwidth limits in Kbit/s.
As alternative, the following attributes can be used instead of therouter_ingress_cir, therouter_egress_cir to specify bandwidth limits:
Vendor: 14122
Attribute: WISPr-Bandwidth-Max-Up (8)
Attribute: WISPr-Bandwidth-Max-Down (7)
These attributes specify subscriber ingress and egress bandwidth limits in bit/s.
Another alternative to specify subscriber bandwidth limits is:
Vendor: 14988
Attribute: Mikrotik-Rate-Limit (8)
Vendor: TheRouter
Attribute: therouter_pbr
This attribute controls the ipset specified in 'subsc u32set init' command. Attribute value 1 instructs TheRouter to add subscriber's IP address to the ipset, value 2 instructs TheRouter to delete subscriber's ip address from the ipset.
BisonRouter supports the following standard attributes for PPPoE subscribers:
Vendor: 311
Attribute: RAD_VSA_MS_PRIMARY_DNS_SERVER (28)
Attribute: RAD_VSA_MS_SECONDARY_DNS_SERVER (29)
Those attributes are used to specify RDNS servers for a PPPoE subscriber.
Vendor: standard
PW_FRAMED_IP_ADDRESS (8)
PW_FRAMED_POOL (88)
PW_FRAMED_ROUTE (22)
PW_CLASS (25)
PW_FRAMED_IPV6_PREFIX (97)
PW_FRAMED_IPV6_ADDRESS (99)
PW_DELEGATED_IPV6_PREFIX (123)
PW_FRAMED_IPV6_POOL (100)
PW_STATEFUL_IPV6_ADDRESS_POOL (172)
PW_DELEGATED_IPV6_PREFIX_POOL (171)
Documentation for the standard attributes can be found in the RFC documents. BisonRouter uses those attributes in the way that documentation suggests.