True wireless

[Keeze]

Just finished my build of the Pedalino. I added an 5000 mAh powerbak, which should last for about 30 hours (I measured the current at about 180 mA when in use). I also replaced the Arduino pro mini for a teensy LC, cause the teensy is much better in USB coms and USB MIDI is standard implemented.

I used stained spruce and 3D printed sides and partly the back. @alf45tar thanks for this project!

Cheers,
Kees

[alf45tar]

Very good job. You find your way to improve it.

[Keeze]

So I got a new amp... A Katana and had a spare RPi 3B+ laying around. So I built a BLE to USB midi hub and now I can control my Katana. It worked on the first try! Did I already tell how awesome this project is!

[alf45tar]

PedalinoMini display every MIDI message received from any interface.
Not sure to understand your question.

[Celticpure]

If a manual Channel (patch) press on the katana amp was pressed, is this change in channel (patch) automatically shown on the Pedalino.

[alf45tar]

Is Katana able to send MIDI out? Can you see the MIDI message sent by the Katana to PedalinoMini display?

[Keeze]

I tried, but no, no message is display on the screen. Also, when I connect the Katana to a PC I get 3 Midi devices, but none of them appear to send anything. Only when I open Tone Studio for Katana (Boss app to configure the Katana) I see a bunch of sysex messages appear in the MidiOX screen when I press a Channel button....

[alf45tar]

It looks like Katana has its own language.