⏪ Back to Overview

8x8 Projector

🛒 Bill-Of-Material

First, grab a

Pattern Beam Projector aka 20 Watt RGB Stage Light Aliexpress

* Matrix Panel [Amazon](https://amzn.to/34Iu1PR) [Aliexpress](https://s.click.aliexpress.com/e/_APoWfr). * M2 screw and washers, prefered Nylon types

🛠 Assembly Steps

Open the projector and remove the led board and the controller. Keep only the genuine power board with the fan.
Take the old power supply connection (+- 4.5V) and soldered it to directy to the RGBFight board (Pads from unpopulated C5 suits perfectly)
Prepare the adaptor plate on an laser cutter or CNC. Reduce the the side lips until they into the mounting brackets.
Screw the matrix panel with attached RGBFighter to the adaptor. Take care about the center alignmentm, adjustable slot holes
Put everything together and enjoy the show!

🎥 Final Setup

Magnetic Strip

🛒 Bill-Of-Material

Grab a

12 mm magnetic strip
WS2812B or similar strip and scissors.

🛠 Assembly Steps

⚠️ Difficult to have good glue contact between magnetic band and strip. Bad results to glue together with silicon protection ⚠️

🎥 Final Setup