cisco.nxos.nxos_pim_rp_address.rst

NxosPimRpAddress()

• ScriptKit Synopsis
• Ansible Module Documentation
• ScriptKit Example
• Dependencies
• NOTES

ScriptKit Synopsis

• NxosPimRpAddress() generates Ansible Playbook tasks conformant with cisco.nxos.nxos_pim_rp_address
• These can then be passed to Playbook().add_task()

Ansible Module Documentation

• nxos_pim_rp_address

ScriptKit Example

• unit_test/cisco/nxos/unit_test_nxos_pim_rp_address.py

Dependencies

The following must be enabled prior to applying nxos_pim_rp_address playbook:

feature pim

NOTES

1. state=absent is currently not supported on all platforms

Property	Description
bidir	If True, group_list refers to a set of PIM bidirectional mode multicast groups. If False, group_list refers to a set of PIM Sparse mode groups: - Type: bool() - Valid values: - False - True - Example: task.bidir = False
group_list	Multicast groups for which rp_address will act as the rendezvous point: - Type: str() - Valid values: - ipv4 multicast address with prefixlen - A.B.C.D/LEN - Example: task.group_list = '225.1.0.0/16'
prefix_list	Prefix list policy for static RP: - Type: str() - Valid values: - ip prefix-list name - Example: task.prefix_list = 'ALLOW_SOURCES'
route_map	Route map policy for static RP: - Type: str() - Valid values: route-map name - Example: task.route_map = 'ALLOW_SOURCES'
rp_address	Configures a Protocol Independent Multicast (PIM) static rendezvous point (RP) address: - Type: str() - Valid values: - ipv4 unicast address - A.B.C.D - Example: task.rp_address = '10.1.1.3'
state	Desired state after task completion: - Type: str() - Valid values: - absent - present - Example: task.state = 'present' - Required
task_name	Name of the task. Ansible will display this when the playbook is run: - Type: str() - Example: - task.task_name = 'my task'

Authors

• Allen Robel (@PacketCalc)