terraform.tfvars.example

#################################
# ha-sap-terraform-deployments project configuration file
# Find all the available variables and definitions in the variables.tf file
#################################

# qemu uri, this example is to run locally
qemu_uri = "qemu:///system"

# Use already existing network
#network_name = "my-network"

# Use bridge device on hypervisor
#bridge_device = "br0"

# Due to some internal limitations, the iprange of the existing network must be defined
# The iprange must be defined for already existing network and to create a new one
iprange = "192.168.XXX.Y/24"

# libvirt storage pool, select the libvirt storage pool where the volume will stored

# storage_pool = "terraform"

# Base image configuration. This images will be used for all deployed machines unless the specific image is defined
# The source image has preference over the `volume_name` parameter
#source_image = "url-to-your-sles4sap-image"

# Use an already existing image. The image must be in the same storage pool defined in `storage_pool` parameter
# This option is way faster as the image must not be downloaded
#volume_name = "SLES4SAP-15_SP1"

#################################
# General configuration variables
#################################

# Deployment name. This variable is used to complement the name of multiple infrastructure resources adding the string as suffix
# If it is not used, the terraform workspace string is used
# The name must be unique among different deployments
# deployment_name = "mydeployment"

# Add the "deployment_name" as a prefix to the hostname.
#deployment_name_in_hostname = true

# SUSE Customer Center Registration parameters.
#reg_code = "<<REG_CODE>>"
#reg_email = "<<your email>>"

# For any sle12 version the additional module sle-module-adv-systems-management/12/x86_64 is mandatory if reg_code is provided
#reg_additional_modules = {
#    "sle-module-adv-systems-management/12/x86_64" = ""
#    "sle-module-containers/12/x86_64" = ""
#    "sle-ha-geo/12.4/x86_64" = "<<REG_CODE>>"
#}

# Authorize additional keys optionally (in this case, the private key is not required)
# Path to local files or keys content
#authorized_keys = ["/home/myuser/.ssh/id_rsa_second_key.pub", "/home/myuser/.ssh/id_rsa_third_key.pub", "ssh-rsa AAAAB3NzaC1yc2EAAAA...."]

##########################
# Other deployment options
##########################

# Repository url used to install HA/SAP deployment packages
# It contains the salt formulas rpm packages and other dependencies.
#
## Specific Release - for latest release look at https://github.com/SUSE/ha-sap-terraform-deployments/releases
# To auto detect the SLE version
#ha_sap_deployment_repo = "https://download.opensuse.org/repositories/network:ha-clustering:sap-deployments:v8/"
# Otherwise use a specific SLE version:
#ha_sap_deployment_repo = "https://download.opensuse.org/repositories/network:ha-clustering:sap-deployments:v8/SLE_15_SP3/"
#
## Development Release (use if on `develop` branch)
# To auto detect the SLE version
#ha_sap_deployment_repo = "https://download.opensuse.org/repositories/network:ha-clustering:sap-deployments:devel/"
# Otherwise use a specific SLE version:
#ha_sap_deployment_repo = "https://download.opensuse.org/repositories/network:ha-clustering:sap-deployments:devel/SLE_15_SP3/"

# Provisioning log level (error by default)
#provisioning_log_level = "info"

# Print colored output of the provisioning execution (true by default)
#provisioning_output_colored = false

# Enable pre deployment steps (disabled by default)
#pre_deployment = true

# To disable the provisioning process
#provisioner = ""

# Run provisioner execution in background
#background = true

# Testing and QA purpose

# Define if the deployement is using for testing purpose
# Disable all extra packages that do not come from the image
# Except salt-minion (for the moment) and salt formulas
# true or false
#offline_mode = false

# Execute HANA Hardware Configuration Check Tool to bench filesystems
# true or false (default)
#hwcct = false

#########################
# HANA machines variables
#########################

# Hostname, without the domain part
#hana_name = "vmhana"

# Set specific image for HANA (it's the same for iscsi, monitoring, netweaver and drbd)
# This option has preference over base image options
# hana_source_image = "url-to-your-sles4sap-image"
# hana_volume_name   = "SLES4SAP-15_SP0"

# Disk size for HANA database content in bytes
#hana_node_disk_size  = 68719476736 # 64GB
# For S/4HANA set a big disk size
#hana_node_disk_size  = 375809638400 # 350GB

# The next variables define how the HANA installation software is obtained.
# 'hana_inst_master' is a NFS share where HANA installation files (extracted or not) are stored
# 'hana_inst_master' must be used always! It is used as the reference path to the other variables

# Local folder where HANA installation master will be mounted
#hana_inst_folder = "/sapmedia/HANA"

# There are multiple options:
# 1. Use an already extracted HANA Platform folder structure.
# The last numbered folder is the HANA Platform folder with the extracted files with
# something like `HDB:HANA:2.0:LINUX_X86_64:SAP HANA PLATFORM EDITION 2.0::XXXXXX` in the LABEL.ASC file
hana_inst_master = "url-to-your-nfs-share:/sapdata/sap_inst_media/51053381"

# 2. Combine the `hana_inst_master` with `hana_platform_folder` variable.
#hana_inst_master = "url-to-your-nfs-share:/sapdata/sap_inst_media"
# Specify the path to already extracted HANA platform installation media, relative to hana_inst_master mounting point.
# This will have preference over hana archive installation media
#hana_platform_folder = "51053381"

# 3. Specify the path to the HANA installation archive file in either of SAR, RAR, ZIP, EXE formats, relative to the 'hana_inst_master' mounting point
# For multipart RAR archives, provide the first part EXE file name.
#hana_archive_file = "51053381_part1.exe"

# 4. If using HANA SAR archive, provide the compatible version of sapcar executable to extract the SAR archive
#hana_archive_file = "IMDB_SERVER.SAR"
#hana_sapcar_exe = "SAPCAR"

# For option 3 and 4, HANA installation archives are extracted to the path specified
# at hana_extract_dir (optional, by default /sapmedia_extract/HANA). This folder cannot be the same as `hana_inst_folder`!
#hana_extract_dir = "/sapmedia_extract/HANA"

# The following SAP HANA Client variables are needed only when you are using a HANA database SAR archive for HANA installation.
# HANA Client is used by monitoring & cost-optimized scenario and it is already included in HANA platform media unless a HANA database SAR archive is used
# You can provide HANA Client in one of the two options below:
# 1. Path to already extracted hana client folder, relative to hana_inst_master mounting point
#hana_client_folder = "SAP_HANA_CLIENT"
# 2. Or specify the path to the hana client SAR archive file, relative to the 'hana_inst_master'. To extract the SAR archive, you need to also provide compatible version of sapcar executable in variable hana_sapcar_exe
# It will be extracted to hana_client_extract_dir path (optional, by default /sapmedia_extract/HANA_CLIENT)
#hana_client_archive_file = "IMDB_CLIENT20_003_144-80002090.SAR"
#hana_client_extract_dir = "/sapmedia_extract/HANA_CLIENT"

# Enable system replication and HA cluster
#hana_ha_enabled = true

# Disable minimal memory checks for HANA. Useful to deploy development clusters.
# Low memory usage can cause a failed deployment. Be aware that this option does
# not work with any memory size and will most likely fail with less than 16 GiB
#hana_ignore_min_mem_check = false

# More configuration about the HANA machines
# Set the IP addresses for the HANA machines. Leave this commented to get an autogenerated addresses
#hana_ips         = ["192.168.XXX.Y", "192.168.XXX.Y+1"]

# IP address used to configure the hana cluster floating IP. It must belong to the same subnet than the hana machines
#hana_cluster_vip = "192.168.XXX.Y+3"

# Enable Active/Active HANA setup (read-only access in the secondary instance)
#hana_active_active = true

# HANA cluster secondary vip. This IP address is attached to the read-only secondary instance. Only needed if hana_active_active is set to true
#hana_cluster_vip_secondary = "192.168.XXX.Y+4"

# HANA instance configuration
# Find some references about the variables in:
# https://help.sap.com
# HANA instance system identifier. The system identifier must be composed by 3 uppercase chars/digits string starting always with a character (there are some restricted options).
#hana_sid = "PRD"
# HANA instance number. It's composed of 2 integers string
#hana_instance_number = "00"
# HANA instance master password. The password must contain at least 8 characters, comprising 1 digit, 1 upper-case character, 1 lower-case character and no special characters.
#hana_master_password = "YourPassword1234"
# HANA primary site name. Only used if HANA's system replication feature is enabled (hana_ha_enabled to true)
#hana_primary_site = "Site1"
# HANA secondary site name. Only used if HANA's system replication feature is enabled (hana_ha_enabled to true)
#hana_secondary_site = "Site2"

# Cost optimized scenario
#scenario_type = "performance-optimized" # default
# or
#scenario_type = "cost-optimized"

#######################
# SBD related variables
#######################

# In order to enable the iscsi machine creation _fencing_mechanism must be set to 'sbd' for any of the clusters

# Hostname, without the domain part
#iscsi_name = "vmiscsi"

# Choose the sbd storage option. Options: iscsi, shared-disk
#sbd_storage_type = "iscsi"
#iscsi_srv_ip = "192.168.XXX.Y+6"

# Number of LUN (logical units) to serve with the iscsi server. Each LUN can be used as a unique sbd disk
#iscsi_lun_count = 3

# Disk size in Bytes used to create the LUNs and partitions to be served by the ISCSI service
#sbd_disk_size = 10737418240

##############################
# Monitoring related variables
##############################

# Enable the host to be monitored by exporters
#monitoring_enabled = true

# Hostname, without the domain part
#monitoring_name = "vmmonitoring"

# IP address of the machine where prometheus and grafana are running
#monitoring_srv_ip = "192.168.XXX.Y+7"

########################
# DRBD related variables
########################

# Enable the DRBD cluster for nfs
#drbd_enabled = true

# Hostname, without the domain part
#drbd_name = "vmdrbd"

# IP of DRBD cluster
#drbd_ips = ["192.168.XXX.Y+8", "192.168.XXX.Y+9"]

# NFS share mounting point and export. Warning: Since cloud images are using cloud-init, /mnt folder cannot be used as standard mounting point folder
# DRBD cluster will create the NFS export in /mnt_permanent/sapdata/{netweaver_sid} to be connected as {drbd_cluster_vip}:/{netweaver_sid} (e.g.: )192.168.1.20:/HA1
#drbd_nfs_mounting_point = "/mnt_permanent/sapdata"

#############################
# Netweaver or S/4HANA related variables
#############################

# Enable/disable Netweaver deployment
#netweaver_enabled = true

# Hostname, without the domain part
#netweaver_name = "vmnetweaver"

# Netweaver APP server count (PAS and AAS)
# Set to 0 to install the PAS instance in the same instance as the ASCS. This means only 1 machine is installed in the deployment (2 if HA capabilities are enabled)
# Set to 1 to only enable 1 PAS instance in an additional machine`
# Set to 2 or higher to deploy additional AAS instances in new machines
#netweaver_app_server_count = 2

# Enabling this option will create a ASCS/ERS HA available cluster together with a PAS and AAS application servers
# Set to false to only create a ASCS and PAS instances
#netweaver_ha_enabled = true

# Select SBD as fencing mechanism for the Netweaver cluster
#netweaver_cluster_fencing_mechanism = "sbd"

# Set the Netweaver product id. The 'HA' sufix means that the installation uses an ASCS/ERS cluster
# Below are the supported SAP Netweaver product ids if using SWPM version 1.0:
# - NW750.HDB.ABAP
# - NW750.HDB.ABAPHA
# - S4HANA1709.CORE.HDB.ABAP
# - S4HANA1709.CORE.HDB.ABAPHA
# Below are the supported SAP Netweaver product ids if using SWPM version 2.0:
# - S4HANA1809.CORE.HDB.ABAP
# - S4HANA1809.CORE.HDB.ABAPHA
# - S4HANA1909.CORE.HDB.ABAP
# - S4HANA1909.CORE.HDB.ABAPHA
# - S4HANA2020.CORE.HDB.ABAP
# - S4HANA2020.CORE.HDB.ABAPHA
# - S4HANA2021.CORE.HDB.ABAP
# - S4HANA2021.CORE.HDB.ABAPHA

# Example:
#netweaver_product_id = "NW750.HDB.ABAPHA"

# Preparing the Netweaver download basket. Check `doc/sap_software.md` for more information

# NFS share with Netweaver installation folders
#netweaver_inst_media = "url-to-your-nfs-share"

# This share must contain the next software (select the version you want to install of course)

# NFS share to store the Netweaver shared files. Only used if drbd_enabled is not set. For single machine deployments (ASCS and PAS in the same machine) set an empty string
#netweaver_nfs_share = "url-to-your-netweaver-sapmnt-nfs-share"

# Path where netweaver sapmnt data is stored.
#netweaver_sapmnt_path = "/sapmnt"

# Netweaver installation required folders
# SAP SWPM installation folder, relative to the netweaver_inst_media mounting point
#netweaver_swpm_folder     =  "your_swpm"
# Or specify the path to the sapcar executable & SWPM installer sar archive, relative to the netweaver_inst_media mounting point
# The sar archive will be extracted to path specified at netweaver_extract_dir under SWPM directory (optional, by default /sapmedia_extract/NW/SWPM)
#netweaver_sapcar_exe = "your_sapcar_exe_file_path"
#netweaver_swpm_sar = "your_swpm_sar_file_path"
# Folder where needed SAR executables (sapexe, sapdbexe) are stored, relative to the netweaver_inst_media mounting point
#netweaver_sapexe_folder   =  "download_basket"
# Additional media archives or folders (added in start_dir.cd), relative to the netweaver_inst_media mounting point
#netweaver_additional_dvds = ["dvd1", "dvd2"]

# IP addresses of the machines hosting Netweaver instances
#netweaver_ips = ["192.168.XXX.Y+2", "192.168.XXX.Y+3", "192.168.XXX.Y+4", "192.168.XXX.Y+5"]
#netweaver_virtual_ips = ["192.168.XXX.Y+6", "192.168.XXX.Y+7", "192.168.XXX.Y+8", "192.168.XXX.Y+9"]

# Netweaver installation configuration
# Netweaver system identifier. The system identifier must be composed by 3 uppercase chars/digits string starting always with a character (there are some restricted options)
#netweaver_sid = "HA1"
# Netweaver ASCS instance number. It's composed of 2 integers string
#netweaver_ascs_instance_number = "00"
# Netweaver ERS instance number. It's composed of 2 integers string
#netweaver_ers_instance_number = "10"
# Netweaver PAS instance number. If additional AAS machines are deployed, they get the next number starting from the PAS instance number. It's composed of 2 integers string
#netweaver_pas_instance_number = "01"
# NetWeaver or S/4HANA master password. 
# It must follow the SAP Password policies such as having 8 - 14 characters for NetWeaver or 10 - 14 characters for S/4HANA.
# It cannot start with special characters and must contain a combination of
# upper and lower case characters and numbers (Invalid characters are backslash and double quote).
#netweaver_master_password = "SuSE1234"