Skip to content

Latest commit

 

History

History
201 lines (141 loc) · 5.78 KB

CHANGELOG.md

File metadata and controls

201 lines (141 loc) · 5.78 KB
Raw

Changelog

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog and this project adheres to Semantic Versioning.

[Unreleased]

Added

Changed

  • Fix non-setable MEIE bit in MIE CSR
  • Bump fpnew to v0.6.2

4.2.0 - 2019-06-04

Added

  • Check execute PMA on instruction frontend
  • Add support for non-contiguous cacheable regions to the PMA checks
  • Provision exponential backoff for AMO SC in L1 D$ miss handler

Changed

  • Several small fixes to get the code running on VCS
  • Fix compressed instruction decoding in tracer
  • Fix privilege bug in performance counters. The counters have always been accessible in user mode.
  • Fix RISC-V PK simulation bug caused due to insufficient time to init the a0 and a1 registers via the bootrom
  • Fix bug in wt_axi_adapter (only appeared when dcache lines were wider than icache lines)
  • Fix potentially long timing path in axi_lite_interface
  • Fix VCS elab warning in load_store_unit
  • Replace PLIC with implementation from lowRISC
  • Re-work interrupt and debug subsystem to associate requests during decode. This improves stability on for non-idempotent loads.
  • Bump fpnew to v0.5.5
  • Bump axi to v0.7.0
  • Bump common_cells to v1.13.1
  • Bump riscv-dbg to v0.1
  • Improve FPU pipelining and timing around scoreboard
  • Reworked the axilite to PLIC shim for OpenPiton+Ariane
  • Remove in and out aliases for AXI interfaces
  • Fix small issues with DC synthesis
  • Fix wrong dirtying of sd flag in mstatus
  • Synthesis fix for Vivado 2018.3
  • Clean-up instruction front-end, small IPC improvement
  • Move to Verilator 4.014

4.1.2

  • Update FPU headers (license)

4.1.1

Changed

  • Hotfix: add missing defines for OpenPiton cache system.

4.1.0

Added

  • Official support for floating point unit
  • Added AXI-64bit adapter for write-through cache system
  • Added AXI atomic ops and exclusive access support to write-through cache system
  • Provision riscv-isa-sim tandem simulation
  • Support for preloading

Changed

  • Rerouted the JTAG from PMOD to second channel of FTDI 2232 chip on Genesys 2 board
  • Increase available RAM size on Genesys II board to 1 GiB
  • Fixed problem which decoded compressed hints as illegal instructions
  • Reduce clock frequency of FPGA to 30 MHz to accomodate FPU
  • Bugfixes in write-through cache system
  • ID width fix in random delayer

4.0.0

Added

  • Preliminary support for A-Extension
  • Preliminary FP support
  • Preliminary support for OpenPiton cache system
  • Commit log feature
  • Provisioned aw_top signal for close to memory atomics
  • FPGA Support
  • Misc bug-fixes
  • Platform Level Interrupt Controller (PLIC)
  • FPGA Bootrom with capability to boot from SD Card

Changed

  • core_id / cluster_id inputs have been merged to hard_id input (interface changes)
  • The three AXI ports have been merged into one (interface changes)
  • [Bugfix] Wrong flagging of memory in machine mode if high bits (63-38) are not equal #136

3.0.0

Added

  • Added RISC-V compliant debug (interface changes)
  • Implemented basic re-naming

Changed

  • [Bugfix] Cache-refill AXI logic (AXI protocol violation)
  • [Bugfix] MSTATUS write-able through SSTATUS #65
  • [Bugfix] PTW has protocol violation #61
  • [Bugfix] Race-condition #54
  • Removed timer input. Access to mtime will trap and must be handled by M-mode SW.

2.0.2 - 2018-04-08

Changed

  • Bugfix in flush behaviour of cache #34
  • Pumped submodules

2.0.1 - 2018-01-26

Added

  • Improved instruction fetch fronten-end
  • Add RAS
  • Add support for Bender hardware management

Changed

  • Bugfix in non-detected illegal instruction #12
  • Bugfix in non-detected illegal instruction JALR (funct3 != 0)
  • Bugfix in non-detected illegal instruction FENCE (some bit-checks missing)

2.0.0 - 2018-01-26

Added

  • Instruction cache added
  • Support for Verilator

Changed

  • CI support for verilator
  • Update documentation

1.0.0 - 2018-01-17

Added

  • Non-blocking data cache
  • Two AXI interfaces on top level, one for bypassing and one for actual cache-able regions
  • Performance Counters
  • Hardware multiplication (full M-Extension)
  • Support for inter processor interrupts (IPI)

Changed

  • Testbench: EOC component now listening on store interface only
  • Store interfaces has been simplified by removing the valid signal, a transaction is now considered finished as soon as the dcache gives the grant signal.
  • EOC and dcache checker has been reworked to get rid of absolute path in UVM testbench
  • Fix problem when bypassing the data cache

0.4.0 - 2017-10-13

Linux booting on FPGA.

Added

  • Support for M Extension (mul, div and reminder) in simulation
  • Preliminary debug support
  • Added support for cache management instructions

Changed

  • Various bug fixes (branch-prediction, PTW and TLB problems, interrupt handling)
  • Fixed synthesis issues

[0.3.0] - 2017-07-15

Added

  • Added support for device tree in Ariane's testbench

Changed

  • Bugfixes in compressed decoder (legal shifts where throwing an illegal instruction although they where legal)
  • Increase memory size to 16 MB in-order to simulate a full Linux boot
  • Re-worked timer facilities in the CSR section, moved to a platform RTC
  • Core completed its first full Linux boot
  • Changelog design, adhering to a common standard

[0.2.0] - 2017-06-28

Added

  • Virtual memory support according to RISC-V privilege specification 1.11 (WIP)
  • Add support for Torture test framework

Changed

  • IPC improvements
  • Timing improvements
  • New fetch interface, smaller and ready for macro-op fusion and dual-issue

[0.1.0] - 2017-06-21

Added

  • Initial development, getting to a stable point