We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Yes, I have checked and this is a new bug not previously reported.
When a M0/M1 command is sent, the LCD display does not have a button to resume the print
The screen should have a Continue button.
A screen is displayed with a wait message, but no button
With Cura:
5.7.0
Wanhao Duplicator i3 Plus
No response
None
Cura
https://community.advi3pp.com/t/pause-at-height-layer-no-resume-button-in-5-7-0/5200/6
The text was updated successfully, but these errors were encountered:
Fixed
Sorry, something went wrong.
No branches or pull requests
Did you check that your report is not a duplicate?
Yes, I have checked and this is a new bug not previously reported.
Bug Description
When a M0/M1 command is sent, the LCD display does not have a button to resume the print
Expected behavior
The screen should have a Continue button.
Actual behavior
A screen is displayed with a wait message, but no button
Steps to Reproduce
With Cura:
Version of ADVi3++ Firmware
5.7.0
Printer model
Wanhao Duplicator i3 Plus
Mods
No response
Bed Leveling
None
Your Slicer
Cura
Host Software
None
Additional information & file uploads
https://community.advi3pp.com/t/pause-at-height-layer-no-resume-button-in-5-7-0/5200/6
The text was updated successfully, but these errors were encountered: