Skip to content

Latest commit

 

History

History
9869 lines (9633 loc) · 411 KB

cisco.iosxr.iosxr_bgp_global_module.rst

File metadata and controls

9869 lines (9633 loc) · 411 KB

cisco.iosxr.iosxr_bgp_global

Resource module to configure BGP.

Version added: 2.0.0

  • This module configures and manages the attributes of BGP global on Cisco IOS-XR platforms.
Parameter Choices/Defaults Comments
config
dictionary
A list of configurations for BGP global.
as_number
string
Autonomous system number of the router.
bfd
dictionary
Configure BFD parameters.
minimum_interval
integer
Specifies the BFD session's minimum-interval value for the neighbor.
multiplier
integer
Specifies the BFD session's multiplier value for the neighbor.
bgp
dictionary
BGP parameters.
as_path_loopcheck
boolean
    Choices:
  • no
  • yes
Enable AS-path loop checking for iBGP peers.
auto_policy_soft_reset
dictionary
Enable automatic soft peer reset on policy reconfiguration.
disable
boolean
    Choices:
  • no
  • yes
Disable an automatic soft reset of Border Gateway Protocol (BGP) peers.
bestpath
dictionary
Select the bestpath selection algorithim for BGP routes.
aigp
dictionary
AIGP attribute
ignore
boolean
    Choices:
  • no
  • yes
Ignore AIGP attribute.
as_path
dictionary
Select the bestpath selection based on as-path.
ignore
boolean
    Choices:
  • no
  • yes
ignore
multipath_relax
boolean
    Choices:
  • no
  • yes
multipath-relax
compare_routerid
boolean
    Choices:
  • no
  • yes
Compare router-id for identical EBGP paths.
cost_community
dictionary
Cost community.
ignore
boolean
    Choices:
  • no
  • yes
ignore cost_community
med
dictionary
MED attribute
always
boolean
    Choices:
  • no
  • yes
Allow comparing MED from different neighbors.
confed
boolean
    Choices:
  • no
  • yes
Compare MED among confederation paths.
missing_as_worst
boolean
    Choices:
  • no
  • yes
Treat missing MED as the least preferred one.
origin_as
dictionary
BGP origin-AS knobs.
allow
dictionary
BGP origin-AS knobs.
invalid
boolean
    Choices:
  • no
  • yes
BGP bestpath selection will allow 'invalid' origin-AS
use
dictionary
BGP origin-AS knobs.
validity
boolean
    Choices:
  • no
  • yes
BGP bestpath selection will use origin-AS validity
cluster_id
string
Cluster ID of this router acting as a route reflector.
confederation
dictionary
confederation.
identifier
integer
Set routing domain confederation AS.
peers
list / elements=integer
Enter peer ASs in BGP confederation mode.
default
dictionary
Configure default value.
local_preference
integer
local preferance.
Please refer vendor documentation for valid values
enforce_first_as
dictionary
Enforce the first AS for EBGP routes
disable
boolean
    Choices:
  • no
  • yes
disable enforce 1st as
fast_external_fallover
dictionary
Immediately reset session if a link to a directly connected external peer goes down.
disable
boolean
    Choices:
  • no
  • yes
disable fast external fallover.
graceful_restart
dictionary
Enable graceful restart support.
graceful_reset
boolean
    Choices:
  • no
  • yes
Reset gracefully if configuration change forces a peer reset.
purge_time
integer
Time before stale routes are purged in seconds <1-6000>.
restart_time
integer
Restart time advertised to neighbors in seconds <1-4095>.
set
boolean
    Choices:
  • no
  • yes
Enable graceful-restart.
stalepath_time
integer
Maximum time to wait for restart of GR capable peers in seconds <1-4095>.
install
dictionary
Install diversion path to RIB/CEF.
diversion
boolean
    Choices:
  • no
  • yes
Install diversion path to RIB/CEF.
log
dictionary
Log bgp info
log_message
dictionary
Log neighbor inbound/outbound message.
disable
boolean
    Choices:
  • no
  • yes
disable inbound outbound messages.
neighbor
dictionary
Log neighbor state info.
changes
dictionary
Log neighbor up/down and reset reason.
detail
boolean
    Choices:
  • no
  • yes
detail
disable
boolean
    Choices:
  • no
  • yes
disable
maximum
dictionary
Maximum number of neighbors that can be configured
neighbor
integer
Maximum number of neighbors <1-15000>.
multipath
dictionary
Change multipath selection criteria
as_path
dictionary
AS path
ignore
dictionary
Ignore as-path related check for multipath selection.
onwards
boolean
    Choices:
  • no
  • yes
Ignore everything onwards as-path for multipath selection.
origin_as
dictionary
BGP origin-AS knobs.
validation
dictionary
BGP origin-AS validation knobs.
disable
boolean
    Choices:
  • no
  • yes
Disable RPKI origin-AS validation.
signal
dictionary
Signal origin-AS validity towards peers.
ibgp
boolean
    Choices:
  • no
  • yes
Signal origin-AS validity towards iBGP peers
time
dictionary
Time to wait between an RPKI update and a BGP table walk.
time_in_second
integer
Prefix validation time (in seconds).
time_off
boolean
    Choices:
  • no
  • yes
No automatic prefix validation after an RPKI update.
redistribute_internal
boolean
    Choices:
  • no
  • yes
Redistribute internal BGP routes.
router_id
string
Configure Router-id. Example- A.B.C.D IPv4 address.
scan_time
integer
Configure background scanner interval for generic scanner Example- <5-3600>.
unsafe_ebgp_policy
boolean
    Choices:
  • no
  • yes
Make eBGP neighbors with no policy pass all routes(cisco-support).
update_delay
integer
Set the max initial delay for sending updates Example-<0-3600> in secs.
default_information
dictionary
Control distribution of default information.
originate
boolean
    Choices:
  • no
  • yes
Distribute a default route
default_metric
integer
Default metric. Example-<1-4294967295>.
graceful_maintenance
dictionary
This allows the router to be brought in or out of service gracefully.
activate
string
    Choices:
  • all-neighbors
  • retain-routes
  • all-neighbors retain-routes
All neighbors with graceful-maintenance config
ibgp
dictionary
Set options for iBGP peers.
policy
dictionary
Set options for route-policy.
out
dictionary
Set options for outbound policy.
enforce_modifications
boolean
    Choices:
  • no
  • yes
Allow policy to modify all attributes.
mpls
dictionary
Enable mpls parameters.
activate
dictionary
Enter mpls interfaces in BGP mpls activate mode.
interface
string
Name of interface to enable mpls.
mvpn
boolean
    Choices:
  • no
  • yes
Connect to PIM/PIM6.
neighbors
list / elements=dictionary
Specify a neighbor router.
advertisement_interval
integer
Minimum interval between sending BGP routing updates.Example-<0-600>.
bfd
dictionary
Configure BFD parameters.
fast_detect
dictionary
Enable Fast detection
disable
boolean
    Choices:
  • no
  • yes
Prevent bfd settings from being inherited from the parent.
set
boolean
    Choices:
  • no
  • yes
set fast-detect
strict_mode
boolean
    Choices:
  • no
  • yes
Hold down neighbor session until BFD session is up
minimum_interval
integer
Specifies the BFD session's minimum-interval value for the neighbor.
multiplier
integer
Specifies the BFD session's multiplier value for the neighbor.
bmp_activate
dictionary
Enable BMP logging for this neighbor.
server
integer
Enable BMP connection to particular server.Example-<1-8>.
capability
dictionary
Advertise capability to the peer.
additional_paths
dictionary
BGP additional-paths commands.
receive
dictionary
Additional paths receive capability
disable
boolean
    Choices:
  • no
  • yes
set receive capability
set
boolean
    Choices:
  • no
  • yes
set receive capability
send
dictionary
Additional paths Send capability
disable
boolean
    Choices:
  • no
  • yes
set send capability
set
boolean
    Choices:
  • no
  • yes
set send capability
suppress
dictionary
Suppress advertising capability to the peer.
all
dictionary
all capability
inheritance_disable
boolean
    Choices:
  • no
  • yes
Do not inherit this configuration from parent group.
set
boolean
    Choices:
  • no
  • yes
set all.
four_byte_AS
dictionary
4-byte-as capability
set
boolean
    Choices:
  • no
  • yes
set 4_byte_as.
cluster_id
string
Cluster ID of this router acting as a route reflector.
description
string
Neighbor specific description.
dmz_link_bandwidth
dictionary
Propagate the DMZ link bandwidth.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Do not inherit this configuration from parent group.
set
boolean
    Choices:
  • no
  • yes
set dmz-link-bandwidth.
dscp
string
Set IP DSCP (DiffServ CodePoint).Please refer vendor document for valid entries.
ebgp_multihop
dictionary
Allow EBGP neighbors not on directly connected networks.
mpls
boolean
    Choices:
  • no
  • yes
Disable BGP MPLS forwarding.
value
integer
maximum hop count.Example-<1-255>.
ebgp_recv_extcommunity_dmz
dictionary
Receive extcommunity dmz link bandwidth from ebgp neighbor.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent ebgp-recv-community-dmz from being inherited from parent
set
boolean
    Choices:
  • no
  • yes
set ebgp-recv-community-dmz.
ebgp_send_extcommunity_dmz
dictionary
Send extcommunity dmz link bandwidth from ebgp neighbor.
cumulatie
boolean
    Choices:
  • no
  • yes
Send cumulative community dmz link bandwidth of all multipaths to ebgp neighbor.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent ebgp-send-community-dmz from being inherited from parent
set
boolean
    Choices:
  • no
  • yes
set ebgp-send-community-dmz.
egress_engineering
dictionary
Enable egress peer engineering for this neighbor.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent egress-engineering from being inherited from parent
set
boolean
    Choices:
  • no
  • yes
set egress-engineering.
enforce_first_as
dictionary
Enforce the first AS for EBGP routes
disable
boolean
    Choices:
  • no
  • yes
disable enforce 1st as
graceful_maintenance
dictionary
Attributes for Graceful Maintenance. This will cause neighbors to de-prefer routes from this router and choose alternates. This allows the router to be brought in or out of service gracefully.
activate
dictionary
Routes will be announced with the graceful maintenance attributes while activated either here or under router bgp configuration.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent activate from being inherited from the parent.
set
boolean
    Choices:
  • no
  • yes
activate.
as_prepends
dictionary
Number of times to prepend the local AS number to the AS path of routes. Default=0
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent as prepends from being inherited from the parent.
value
integer
Range of values for as prepends.Example-<0-6> .
local_preference
dictionary
local preference with which to advertise routes to ibgp neigbors. Default=No Touch
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent local preference from being inherited from the parent.
value
integer
Range of values for Local Preference.Example-<0-4294967295> .
set
boolean
    Choices:
  • no
  • yes
set graceful maintenance.
graceful_restart
dictionary
Enable graceful restart support for this neighbor.
restart_time
integer
Restart time advertised to neighbors in seconds <1-4095>.
stalepath_time
integer
Maximum time to wait for restart of GR capable peers in seconds <1-4095>.
ignore_connected_check
dictionary
Bypass the directly connected nexthop check for single-hop eBGP peering
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent ignore-connected-check from being inherited from the parent
set
boolean
    Choices:
  • no
  • yes
set ignore-connected-check.
keychain
dictionary
Set keychain based authentication.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent keychain from being inherited from parent.
name
string
Name of the key chain - maximum 32 characters.
local
dictionary
Configure local parameter
address
dictionary
IPv4 address
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent local address from being inherited from parent.
ipv4_address
string
IPv4 address <A.B.C.D>.
local_as
dictionary
Specify local AS number.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent local AS from being inherited from parent.
no_prepend
dictionary
Do not prepend local AS to announcements from this neighbor.
replace_as
dictionary
Prepend only local AS to announcements to this neighbor.
dual_as
boolean
    Choices:
  • no
  • yes
Dual-AS mode.
set
boolean
    Choices:
  • no
  • yes
Prepend only local AS to announcements to this neighbor.
set
boolean
    Choices:
  • no
  • yes
Do not prepend local AS to announcements from this neighbor.
value
integer
2 byte, 4 byte As number
log
dictionary
Logging update messages per neighbor.
log_message
dictionary
Logging update/notification messages per neighbor.
in
dictionary
Inbound log messages
disable
boolean
    Choices:
  • no
  • yes
Disable inbound message logging.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevents the msg log from being inherited from the parent.
value
integer
Range for message log buffer size <1-100>.
out
dictionary
Outbound log messages
disable
boolean
    Choices:
  • no
  • yes
Disable inbound message logging.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevents the msg log from being inherited from the parent.
value
integer
Range for message log buffer size <1-100>.
neighbor_address
string / required
Neighbor router address.

aliases: neighbor
origin_as
dictionary
BGP origin-AS knobs.
validation
dictionary
BGP origin-AS validation knobs.
disable
boolean
    Choices:
  • no
  • yes
Disable RPKI origin-AS validation.
password
dictionary
Set a password.
encrypted
string
Specifies an ENCRYPTED password will follow.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent password from being inherited from parent.
receive_buffer_size
integer
Set socket and BGP receive buffer size.Example <512-131072>.
remote_as
integer
Neighbor Autonomous System.
send_buffer_size
integer
Set socket and BGP send buffer size.Example <4096-131072>.
session_open_mode
string
    Choices:
  • active-only
  • both
  • passive-only
Establish BGP session using this TCP open mode.
shutdown
dictionary
Administratively shut down this neighbor.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent shutdown from being inherited from parent
set
boolean
    Choices:
  • no
  • yes
shutdown.
tcp
dictionary
TCP session configuration commands.
mss
dictionary
Maximum Segment Size.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent mss from being inherited from parent
value
integer
TCP initial maximum segment size.
timers
dictionary
BGP per neighbor timers.
holdtime
integer
hold time <3-65535> or 0 Disable hold time.
keepalive_time
integer
keepalive interval <0-65535>.
ttl_security
dictionary
Enable EBGP TTL security.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent ttl-security from being inherited from parent
set
boolean
    Choices:
  • no
  • yes
set ttl-security
update
dictionary
BGP Update configuration.
in
dictionary
Inbound update message handling.
filtering
dictionary
Inbound update message filtering
attribute_filter
dictionary
Attribute-filter configuration.
group
string
Name of group.
logging
dictionary
Update filtering syslog message.
disable
boolean
    Choices:
  • no
  • yes
Disable update filtering syslog message.
update_message
dictionary
Filtered update messages.
buffers
integer
Number of buffers to store filtered update messages.
update_source
string
Source of routing updates.Refer vendor document for valid values.
use
dictionary
Use a neighbor-group and session-group template.
neighbor_group
string
Inherit configuration from a neighbor-group.
session_group
string
Inherit address-family independent config from a session-group
nsr
dictionary
Enable non-stop-routing support for all neighbors.
disable
boolean
    Choices:
  • no
  • yes
disable nsr
set
boolean
    Choices:
  • no
  • yes
set nsr
rpki
dictionary
Configure RPKI.
route
dictionary
Configure an RPKI route.A.B.C.D/length or X:X::X/length Network/Minimum prefix length
max
integer
Maximum prefix length. Example- <1-128> .
origin
integer
Origin Autonomous System number (in asplain format) Example-<1-4294967295>.
value
string
A.B.C.D/length or X:X::X/length Network/Minimum prefix length.
servers
list / elements=dictionary
Configure RPKI cache-servers.
name
string
address of rpki server.
purge_time
integer
Time to wait after a cache goes down to clean up stale routes
refresh_time
dictionary
Time between sending serial-queries for the RPKI cache-server
time_off
boolean
    Choices:
  • no
  • yes
Do not send serial-queries periodically
value
integer
Purge time (in seconds) <30-360>
response_time
dictionary
Time to wait for a response from the RPKI cache-server
time_off
boolean
    Choices:
  • no
  • yes
Wait indefinitely for a response
value
integer
Purge time (in seconds) <15-3600>
shutdown
boolean
    Choices:
  • no
  • yes
Shutdown the RPKI cache-server
transport
dictionary
Specify a transport method for the RPKI cache-server
ssh
dictionary
Connect to the RPKI cache-server using SSH
port
integer
Specify a port number for the RPKI cache-server transport
tcp
dictionary
Connect to the RPKI cache-server using TCP (unencrypted)
port
integer
Specify a port number for the RPKI cache-server transport
socket
dictionary
set socket parameters.
receive_buffer_size
integer
socket receive buffer size.Example-<512-131072>.
send_buffer_size
integer
socket send buffer size.Example- <4096-131072>.
timers
dictionary
BGP per neighbor timers.
holdtime
integer
hold time <3-65535> or 0 Disable hold time.
keepalive_time
integer
keepalive interval <0-65535>.
update
dictionary
BGP Update configuration.
in
dictionary
Inbound update message handling
error_handling
dictionary
Inbound update message error handling.
basic
dictionary
Inbound update message basic error handling
ebgp
dictionary
Inbound update message basic error handling for EBGP neighbors
disable
boolean
    Choices:
  • no
  • yes
disable
ibgp
dictionary
Inbound update message basic error handling for ibgp neighbors
disable
boolean
    Choices:
  • no
  • yes
disable
extended
dictionary
Inbound update message extended error handling
ebgp
boolean
    Choices:
  • no
  • yes
Inbound update message extended error handling for EBGP neighbors
ibgp
boolean
    Choices:
  • no
  • yes
Inbound update message extended error handling for ibgp neighbors
limit
integer
Upper bound on transient memory usage for update generation.Example-<16-2048>.
out
dictionary
BGP Update generation configuration.
logging
boolean
    Choices:
  • no
  • yes
Enable logging of update generation events.
vrfs
list / elements=dictionary
Specify a vrf name.
bfd
dictionary
Configure BFD parameters.
minimum_interval
integer
Specifies the BFD session's minimum-interval value for the neighbor.
multiplier
integer
Specifies the BFD session's multiplier value for the neighbor.
bgp
dictionary
BGP commands.
auto_policy_soft_reset
dictionary
Enable automatic soft peer reset on policy reconfiguration.
disable
boolean
    Choices:
  • no
  • yes
Disable an automatic soft reset of Border Gateway Protocol (BGP) peers.
bestpath
dictionary
Select the bestpath selection algorithim for BGP routes.
aigp
dictionary
AIGP attribute
ignore
boolean
    Choices:
  • no
  • yes
Ignore AIGP attribute.
as_path
dictionary
Select the bestpath selection based on as-path.
ignore
boolean
    Choices:
  • no
  • yes
ignore
multipath_relax
boolean
    Choices:
  • no
  • yes
multipath-relax
compare_routerid
boolean
    Choices:
  • no
  • yes
Compare router-id for identical EBGP paths.
cost_community
dictionary
Cost community.
ignore
boolean
    Choices:
  • no
  • yes
ignore cost_community
med
dictionary
MED attribute
always
boolean
    Choices:
  • no
  • yes
Allow comparing MED from different neighbors.
confed
boolean
    Choices:
  • no
  • yes
Compare MED among confederation paths.
missing_as_worst
boolean
    Choices:
  • no
  • yes
Treat missing MED as the least preferred one.
origin_as
dictionary
BGP origin-AS knobs.
allow
dictionary
BGP origin-AS knobs.
invalid
boolean
    Choices:
  • no
  • yes
BGP bestpath selection will allow 'invalid' origin-AS
use
dictionary
BGP origin-AS knobs.
validity
boolean
    Choices:
  • no
  • yes
BGP bestpath selection will use origin-AS validity
default
dictionary
Configure default value.
local_preference
integer
local preferance.
Please refer vendor documentation for valid values
enforce_first_as
dictionary
Enforce the first AS for EBGP routes
disable
boolean
    Choices:
  • no
  • yes
disable enforce 1st as
fast_external_fallover
dictionary
Immediately reset session if a link to a directly connected external peer goes down.
disable
boolean
    Choices:
  • no
  • yes
disable fast external fallover.
log
dictionary
Log bgp info
log_message
dictionary
Log neighbor inbound/outbound message.
disable
boolean
    Choices:
  • no
  • yes
disable inbound outbound messages.
neighbor
dictionary
Log neighbor state info.
changes
dictionary
Log neighbor up/down and reset reason.
detail
boolean
    Choices:
  • no
  • yes
detail
disable
boolean
    Choices:
  • no
  • yes
disable
multipath
dictionary
Change multipath selection criteria
as_path
dictionary
AS path
ignore
dictionary
Ignore as-path related check for multipath selection.
onwards
boolean
    Choices:
  • no
  • yes
Ignore everything onwards as-path for multipath selection.
redistribute_internal
boolean
    Choices:
  • no
  • yes
Redistribute internal BGP routes.
router_id
string
Configure Router-id. Example- A.B.C.D IPv4 address.
unsafe_ebgp_policy
boolean
    Choices:
  • no
  • yes
Make eBGP neighbors with no policy pass all routes(cisco-support).
default_information
dictionary
Control distribution of default information.
originate
boolean
    Choices:
  • no
  • yes
Distribute a default route
default_metric
integer
Default metric. Example-<1-4294967295>.
mpls
dictionary
Enable mpls parameters.
activate
dictionary
Enter mpls interfaces in BGP mpls activate mode.
interface
string
Name of interface to enable mpls.
neighbors
list / elements=dictionary
Specify a neighbor router.
advertisement_interval
integer
Minimum interval between sending BGP routing updates.Example-<0-600>.
bfd
dictionary
Configure BFD parameters.
fast_detect
dictionary
Enable Fast detection
disable
boolean
    Choices:
  • no
  • yes
Prevent bfd settings from being inherited from the parent.
set
boolean
    Choices:
  • no
  • yes
set fast-detect
strict_mode
boolean
    Choices:
  • no
  • yes
Hold down neighbor session until BFD session is up
minimum_interval
integer
Specifies the BFD session's minimum-interval value for the neighbor.
multiplier
integer
Specifies the BFD session's multiplier value for the neighbor.
bmp_activate
dictionary
Enable BMP logging for this neighbor.
server
integer
Enable BMP connection to particular server.Example-<1-8>.
capability
dictionary
Advertise capability to the peer.
additional_paths
dictionary
BGP additional-paths commands.
receive
dictionary
Additional paths receive capability
disable
boolean
    Choices:
  • no
  • yes
set receive capability
set
boolean
    Choices:
  • no
  • yes
set receive capability
send
dictionary
Additional paths Send capability
disable
boolean
    Choices:
  • no
  • yes
set send capability
set
boolean
    Choices:
  • no
  • yes
set send capability
suppress
dictionary
Suppress advertising capability to the peer.
all
dictionary
all capability
inheritance_disable
boolean
    Choices:
  • no
  • yes
Do not inherit this configuration from parent group.
set
boolean
    Choices:
  • no
  • yes
set all.
four_byte_AS
dictionary
4-byte-as capability
set
boolean
    Choices:
  • no
  • yes
set 4_byte_as.
cluster_id
string
Cluster ID of this router acting as a route reflector.
description
string
Neighbor specific description.
dmz_link_bandwidth
dictionary
Propagate the DMZ link bandwidth.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Do not inherit this configuration from parent group.
set
boolean
    Choices:
  • no
  • yes
set dmz-link-bandwidth.
dscp
string
Set IP DSCP (DiffServ CodePoint).Please refer vendor document for valid entries.
ebgp_multihop
dictionary
Allow EBGP neighbors not on directly connected networks.
mpls
boolean
    Choices:
  • no
  • yes
Disable BGP MPLS forwarding.
value
integer
maximum hop count.Example-<1-255>.
ebgp_recv_extcommunity_dmz
dictionary
Receive extcommunity dmz link bandwidth from ebgp neighbor.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent ebgp-recv-community-dmz from being inherited from parent
set
boolean
    Choices:
  • no
  • yes
set ebgp-recv-community-dmz.
ebgp_send_extcommunity_dmz
dictionary
Send extcommunity dmz link bandwidth from ebgp neighbor.
cumulatie
boolean
    Choices:
  • no
  • yes
Send cumulative community dmz link bandwidth of all multipaths to ebgp neighbor.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent ebgp-send-community-dmz from being inherited from parent
set
boolean
    Choices:
  • no
  • yes
set ebgp-send-community-dmz.
egress_engineering
dictionary
Enable egress peer engineering for this neighbor.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent egress-engineering from being inherited from parent
set
boolean
    Choices:
  • no
  • yes
set egress-engineering.
enforce_first_as
dictionary
Enforce the first AS for EBGP routes
disable
boolean
    Choices:
  • no
  • yes
disable enforce 1st as
graceful_maintenance
dictionary
Attributes for Graceful Maintenance. This will cause neighbors to de-prefer routes from this router and choose alternates. This allows the router to be brought in or out of service gracefully.
activate
dictionary
Routes will be announced with the graceful maintenance attributes while activated either here or under router bgp configuration.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent activate from being inherited from the parent.
set
boolean
    Choices:
  • no
  • yes
activate.
as_prepends
dictionary
Number of times to prepend the local AS number to the AS path of routes. Default=0
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent as prepends from being inherited from the parent.
value
integer
Range of values for as prepends.Example-<0-6> .
local_preference
dictionary
local preference with which to advertise routes to ibgp neigbors. Default=No Touch
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent local preference from being inherited from the parent.
value
integer
Range of values for Local Preference.Example-<0-4294967295> .
set
boolean
    Choices:
  • no
  • yes
set graceful maintenance.
graceful_restart
dictionary
Enable graceful restart support for this neighbor.
restart_time
integer
Restart time advertised to neighbors in seconds <1-4095>.
stalepath_time
integer
Maximum time to wait for restart of GR capable peers in seconds <1-4095>.
ignore_connected_check
dictionary
Bypass the directly connected nexthop check for single-hop eBGP peering
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent ignore-connected-check from being inherited from the parent
set
boolean
    Choices:
  • no
  • yes
set ignore-connected-check.
keychain
dictionary
Set keychain based authentication.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent keychain from being inherited from parent.
name
string
Name of the key chain - maximum 32 characters.
local
dictionary
Configure local parameter
address
dictionary
IPv4 address
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent local address from being inherited from parent.
ipv4_address
string
IPv4 address <A.B.C.D>.
local_as
dictionary
Specify local AS number.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent local AS from being inherited from parent.
no_prepend
dictionary
Do not prepend local AS to announcements from this neighbor.
replace_as
dictionary
Prepend only local AS to announcements to this neighbor.
dual_as
boolean
    Choices:
  • no
  • yes
Dual-AS mode.
set
boolean
    Choices:
  • no
  • yes
Prepend only local AS to announcements to this neighbor.
set
boolean
    Choices:
  • no
  • yes
Do not prepend local AS to announcements from this neighbor.
value
integer
2 byte, 4 byte As number
log
dictionary
Logging update messages per neighbor.
log_message
dictionary
Logging update/notification messages per neighbor.
in
dictionary
Inbound log messages
disable
boolean
    Choices:
  • no
  • yes
Disable inbound message logging.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevents the msg log from being inherited from the parent.
value
integer
Range for message log buffer size <1-100>.
out
dictionary
Outbound log messages
disable
boolean
    Choices:
  • no
  • yes
Disable inbound message logging.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevents the msg log from being inherited from the parent.
value
integer
Range for message log buffer size <1-100>.
neighbor_address
string / required
Neighbor router address.

aliases: neighbor
origin_as
dictionary
BGP origin-AS knobs.
validation
dictionary
BGP origin-AS validation knobs.
disable
boolean
    Choices:
  • no
  • yes
Disable RPKI origin-AS validation.
password
dictionary
Set a password.
encrypted
string
Specifies an ENCRYPTED password will follow.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent password from being inherited from parent.
receive_buffer_size
integer
Set socket and BGP receive buffer size.Example <512-131072>.
remote_as
integer
Neighbor Autonomous System.
send_buffer_size
integer
Set socket and BGP send buffer size.Example <4096-131072>.
session_open_mode
string
    Choices:
  • active-only
  • both
  • passive-only
Establish BGP session using this TCP open mode.
shutdown
dictionary
Administratively shut down this neighbor.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent shutdown from being inherited from parent
set
boolean
    Choices:
  • no
  • yes
shutdown.
tcp
dictionary
TCP session configuration commands.
mss
dictionary
Maximum Segment Size.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent mss from being inherited from parent
value
integer
TCP initial maximum segment size.
timers
dictionary
BGP per neighbor timers.
holdtime
integer
hold time <3-65535> or 0 Disable hold time.
keepalive_time
integer
keepalive interval <0-65535>.
ttl_security
dictionary
Enable EBGP TTL security.
inheritance_disable
boolean
    Choices:
  • no
  • yes
Prevent ttl-security from being inherited from parent
set
boolean
    Choices:
  • no
  • yes
set ttl-security
update
dictionary
BGP Update configuration.
in
dictionary
Inbound update message handling.
filtering
dictionary
Inbound update message filtering
attribute_filter
dictionary
Attribute-filter configuration.
group
string
Name of group.
logging
dictionary
Update filtering syslog message.
disable
boolean
    Choices:
  • no
  • yes
Disable update filtering syslog message.
update_message
dictionary
Filtered update messages.
buffers
integer
Number of buffers to store filtered update messages.
update_source
string
Source of routing updates.Refer vendor document for valid values.
use
dictionary
Use a neighbor-group and session-group template.
neighbor_group
string
Inherit configuration from a neighbor-group.
session_group
string
Inherit address-family independent config from a session-group
rd
dictionary
route distinguisher.
auto
boolean
    Choices:
  • no
  • yes
Automatic route distinguisher.
socket
dictionary
set socket parameters.
receive_buffer_size
integer
socket receive buffer size.Example-<512-131072>.
send_buffer_size
integer
socket send buffer size.Example- <4096-131072>.
timers
dictionary
BGP per neighbor timers.
holdtime
integer
hold time <3-65535> or 0 Disable hold time.
keepalive_time
integer
keepalive interval <0-65535>.
vrf
string
VRF name.
running_config
string
The state the configuration should be left in. - State purged removes all the BGP configurations from the target device. Use caution with this state. - State deleted only removes BGP attributes that this modules manages and does not negate the BGP process completely. Thereby, preserving address-family related configurations under BGP context. - Running states deleted and replaced will result in an error if there are address-family configuration lines present under a neighbor, or a vrf context that is to be removed. Please use the cisco.iosxr.iosxr_bgp_address_family or cisco.iosxr.iosxr_bgp_neighbor_address_family modules for prior cleanup. - Refer to examples for more details.
state
string
    Choices:
  • deleted
  • merged ←
  • replaced
  • gathered
  • rendered
  • parsed
  • purged
  • overridden
The state the configuration should be left in.

Note

  • This module works with connection network_cli.
# Using merged
#
# Before state
# ------------
# RP/0/0/CPU0:10#show running-config router bgp
# Thu Feb  4 09:38:36.245 UTC
# % No such configuration item(s)
# RP/0/0/CPU0:10#

- name: Merge the following BGP global configuration
  cisco.iosxr.iosxr_bgp_global:
    config:
      as_number: 65536
      default_metric: 5
      socket:
        receive_buffer_size: 514
        send_buffer_size: 4098
      bgp:
        confederation:
          identifier: 4
        bestpath:
          med:
            confed: true
        cluster_id: 5
        router_id: 192.0.2.10
      neighbors:
        - neighbor: 192.0.2.13
          remote_as: 65538
          bfd:
            fast_detect:
              strict_mode: true
            multiplier: 6
            minimum_interval: 20
      vrfs:
        - vrf: vrf1
          default_metric: 5

#
# Task Output:
# ---------------
#
# before: {}
# commands:
#   - router bgp 65536
#   - bgp cluster-id 5
#   - bgp router-id 192.0.2.10
#   - bgp bestpath med confed
#   - bgp confederation identifier 4
#   - default-metric 5
#   - socket receive-buffer-size 514
#   - socket send-buffer-size 4098
#   - neighbor 192.0.2.13
#   - bfd fast-detect strict-mode
#   - bfd minimum-interval 20
#   - bfd multiplier 6
#   - remote-as 65538
#   - vrf vrf1
#   - default-metric 5
#
# after:
#     as_number: '65536'
#     bgp:
#       bestpath:
#         med:
#           confed: true
#       cluster_id: '5'
#       confederation:
#         identifier: 4
#       router_id: 192.0.2.10
#     default_metric: 5
#     neighbors:
#     - bfd:
#         fast_detect:
#           strict_mode: true
#         minimum_interval: 20
#         multiplier: 6
#       neighbor_address: 192.0.2.13
#       remote_as: 65538
#     socket:
#       receive_buffer_size: 514
#       send_buffer_size: 4098
#     vrfs:
#     - default_metric: 5
#       vrf: vrf1
#
# After state
# -----------

# RP/0/0/CPU0:10#show running-config router bgp
# Thu Feb  4 09:44:32.480 UTC
# router bgp 65536
#  bgp confederation identifier 4
#  bgp router-id 192.0.2.10
#  bgp cluster-id 5
#  default-metric 5
#  socket send-buffer-size 4098
#  bgp bestpath med confed
#  socket receive-buffer-size 514
#  neighbor 192.0.2.13
#   remote-as 65538
#   bfd fast-detect strict-mode
#   bfd multiplier 6
#   bfd minimum-interval 20
#  !
#  vrf vrf1
#   default-metric 5
#  !
# !

# Using replaced
#
# Before state
# ------------
#
# RP/0/0/CPU0:10#show running-config router bgp
# Thu Feb  4 09:44:32.480 UTC
# router bgp 65536
#  bgp confederation identifier 4
#  bgp router-id 192.0.2.10
#  bgp cluster-id 5
#  default-metric 5
#  socket send-buffer-size 4098
#  bgp bestpath med confed
#  socket receive-buffer-size 514
#  neighbor 192.0.2.13
#   remote-as 65538
#   bfd fast-detect strict-mode
#   bfd multiplier 6
#   bfd minimum-interval 20
#  !
#  vrf vrf1
#   default-metric 5
#  !
# !

- name: Replace the following configuration
  cisco.iosxr.iosxr_bgp_global:
    state: replaced
    config:
      as_number: 65536
      default_metric: 4
      socket:
        receive_buffer_size: 514
        send_buffer_size: 4098
      bgp:
        confederation:
          identifier: 4
        bestpath:
          med:
            confed: true
        cluster_id: 5
        router_id: 192.0.2.10
      neighbors:
        - neighbor: 192.0.2.14
          remote_as: 65538
          bfd:
            fast_detect:
              strict_mode: true
            multiplier: 6
            minimum_interval: 20
      vrfs:
        - vrf: vrf1
          default_metric: 5

#
# Task Output:
# -------------
#
# before:
#     as_number: '65536'
#     bgp:
#       bestpath:
#         med:
#           confed: true
#       cluster_id: '5'
#       confederation:
#         identifier: 4
#       router_id: 192.0.2.10
#     default_metric: 5
#     neighbors:
#     - bfd:
#         fast_detect:
#           strict_mode: true
#         minimum_interval: 20
#         multiplier: 6
#       neighbor_address: 192.0.2.13
#       remote_as: 65538
#     socket:
#       receive_buffer_size: 514
#       send_buffer_size: 4098
#     vrfs:
#     - default_metric: 5
#       vrf: vrf1
#
# commands:
#   - router bgp 65536
#   - default-metric 4
#   - neighbor 192.0.2.14
#   - bfd fast-detect strict-mode
#   - bfd minimum-interval 20
#   - bfd multiplier 6
#   - remote-as 65538
#   - no neighbor 192.0.2.13
#
# after:
#     as_number: '65536'
#     bgp:
#       bestpath:
#         med:
#           confed: true
#       cluster_id: '5'
#       confederation:
#         identifier: 4
#       router_id: 192.0.2.10
#     default_metric: 4
#     neighbors:
#     - bfd:
#         fast_detect:
#           strict_mode: true
#         minimum_interval: 20
#         multiplier: 6
#       neighbor_address: 192.0.2.14
#       remote_as: 65538
#     socket:
#       receive_buffer_size: 514
#       send_buffer_size: 4098
#     vrfs:
#     - default_metric: 5
#       vrf: vrf1
#
# After state
# -----------
#
# RP/0/0/CPU0:10#show running-config router bgp
# Thu Feb  4 09:54:11.161 UTC
# router bgp 65536
#  bgp confederation identifier 4
#  bgp router-id 192.0.2.10
#  bgp cluster-id 5
#  default-metric 4
#  socket send-buffer-size 4098
#  bgp bestpath med confed
#  socket receive-buffer-size 514
#  neighbor 192.0.2.14
#   remote-as 65538
#   bfd fast-detect strict-mode
#   bfd multiplier 6
#   bfd minimum-interval 20
#  !
#  vrf vrf1
#   default-metric 5
#  !
# !

# Using overridden
#
# Before state
# ------------
#
# RP/0/0/CPU0:10#show running-config router bgp
# Thu Feb  4 09:44:32.480 UTC
# router bgp 65536
#  bgp confederation identifier 4
#  bgp router-id 192.0.2.10
#  bgp cluster-id 5
#  default-metric 5
#  socket send-buffer-size 4098
#  bgp bestpath med confed
#  socket receive-buffer-size 514
#  neighbor 192.0.2.13
#   remote-as 65538
#   bfd fast-detect strict-mode
#   bfd multiplier 6
#   bfd minimum-interval 20
#  !
#  vrf vrf1
#   default-metric 5
#  !
# !

- name: Override running config with provided configuration
  cisco.iosxr.iosxr_bgp_global:
    state: overridden
    config:
      as_number: 65536
      default_metric: 4
      socket:
        receive_buffer_size: 514
        send_buffer_size: 4098
      bgp:
        confederation:
          identifier: 4
        bestpath:
          med:
            confed: true
        cluster_id: 5
        router_id: 192.0.2.10
      neighbors:
        - neighbor: 192.0.2.14
          remote_as: 65538
          bfd:
            fast_detect:
              strict_mode: true
            multiplier: 6
            minimum_interval: 20
      vrfs:
        - vrf: vrf1
          default_metric: 5
#
# Task Output:
# -------------
#
# before:
#     as_number: '65536'
#     bgp:
#       bestpath:
#         med:
#           confed: true
#       cluster_id: '5'
#       confederation:
#         identifier: 4
#       router_id: 192.0.2.10
#     default_metric: 5
#     neighbors:
#     - bfd:
#         fast_detect:
#           strict_mode: true
#         minimum_interval: 20
#         multiplier: 6
#       neighbor_address: 192.0.2.13
#       remote_as: 65538
#     socket:
#       receive_buffer_size: 514
#       send_buffer_size: 4098
#     vrfs:
#     - default_metric: 5
#       vrf: vrf1
#
# commands:
#   - router bgp 65536
#   - default-metric 4
#   - neighbor 192.0.2.14
#   - bfd fast-detect strict-mode
#   - bfd minimum-interval 20
#   - bfd multiplier 6
#   - remote-as 65538
#   - no neighbor 192.0.2.13
#
# after:
#     as_number: '65536'
#     bgp:
#       bestpath:
#         med:
#           confed: true
#       cluster_id: '5'
#       confederation:
#         identifier: 4
#       router_id: 192.0.2.10
#     default_metric: 4
#     neighbors:
#     - bfd:
#         fast_detect:
#           strict_mode: true
#         minimum_interval: 20
#         multiplier: 6
#       neighbor_address: 192.0.2.14
#       remote_as: 65538
#     socket:
#       receive_buffer_size: 514
#       send_buffer_size: 4098
#     vrfs:
#     - default_metric: 5
#       vrf: vrf1

# After state
# -----------
#
# RP/0/0/CPU0:10#show running-config router bgp
# Thu Feb  4 09:54:11.161 UTC
# router bgp 65536
#  bgp confederation identifier 4
#  bgp router-id 192.0.2.10
#  bgp cluster-id 5
#  default-metric 4
#  socket send-buffer-size 4098
#  bgp bestpath med confed
#  socket receive-buffer-size 514
#  neighbor 192.0.2.14
#   remote-as 65538
#   bfd fast-detect strict-mode
#   bfd multiplier 6
#   bfd minimum-interval 20
#  !
#  vrf vrf1
#   default-metric 5
#  !
# !

# Using deleted
#
# Before state
# ------------
#
# RP/0/0/CPU0:10#show running-config router bgp
# Thu Feb  4 09:54:11.161 UTC
# router bgp 65536
#  bgp confederation identifier 4
#  bgp router-id 192.0.2.10
#  bgp cluster-id 5
#  default-metric 4
#  socket send-buffer-size 4098
#  bgp bestpath med confed
#  socket receive-buffer-size 514
#  neighbor 192.0.2.14
#   remote-as 65538
#   bfd fast-detect strict-mode
#   bfd multiplier 6
#   bfd minimum-interval 20
#  !
#  vrf vrf1
#   default-metric 5
#  !
# !
#

- name: Delete BGP configurations handled by this module
  cisco.iosxr.iosxr_bgp_global:
    config:
      as_number: 65536
    state: deleted

#
# Task Output:
# -------------
#
# before:
#     as_number: '65536'
#     bgp:
#       bestpath:
#         med:
#           confed: true
#       cluster_id: '5'
#       confederation:
#         identifier: 4
#       router_id: 192.0.2.10
#     default_metric: 4
#     neighbors:
#     - bfd:
#         fast_detect:
#           strict_mode: true
#         minimum_interval: 20
#         multiplier: 6
#       neighbor_address: 192.0.2.14
#       remote_as: 65538
#     socket:
#       receive_buffer_size: 514
#       send_buffer_size: 4098
#     vrfs:
#     - default_metric: 5
#       vrf: vrf1
#
# commands:
#   - router bgp 65536
#   - no bgp cluster-id 5
#   - no bgp router-id 192.0.2.10
#   - no bgp bestpath med confed
#   - no bgp confederation identifier 4
#   - no default-metric 4
#   - no socket receive-buffer-size 514
#   - no socket send-buffer-size 4098
#   - no neighbor 192.0.2.14
#   - no vrf vrf1
#
# after:
#     as_number: '65536'
#
# After state
# -----------
#
# RP/0/0/CPU0:10#show running-config router bgp
# Thu Feb  4 10:01:08.232 UTC
# router bgp 65536
# !
#

# Using purged
#
# Before state
# ------------
#
# RP/0/0/CPU0:10#show running-config router bgp
# Thu Feb  4 09:54:11.161 UTC
# router bgp 65536
#  bgp confederation identifier 4
#  bgp router-id 192.0.2.10
#  bgp cluster-id 5
#  default-metric 5
#  socket send-buffer-size 4098
#  bgp bestpath med confed
#  socket receive-buffer-size 514
#  neighbor 192.0.2.13
#   remote-as 65538
#   bfd fast-detect strict-mode
#   bfd multiplier 6
#   bfd minimum-interval 20
#  !
#  vrf vrf1
#   default-metric 5
#  !
# !
#

- name: Purge all BGP configurations from the device
  cisco.iosxr.iosxr_bgp_global:
    state: purged

#
# Task Output:
# -------------
#
# before:
#     as_number: '65536'
#     bgp:
#       bestpath:
#         med:
#           confed: true
#       cluster_id: '5'
#       confederation:
#         identifier: 4
#       router_id: 192.0.2.10
#     default_metric: 5
#     neighbors:
#     - bfd:
#         fast_detect:
#           strict_mode: true
#         minimum_interval: 20
#         multiplier: 6
#       neighbor_address: 192.0.2.13
#       remote_as: 65538
#     socket:
#       receive_buffer_size: 514
#       send_buffer_size: 4098
#     vrfs:
#     - default_metric: 5
#       vrf: vrf1
#
# commands:
#   - no router bgp 65536
#
# after: {}
#
# After state
# -----------
#
# RP/0/0/CPU0:10#show running-config router bgp
# Thu Feb  4 09:38:36.245 UTC
# % No such configuration item(s)
# RP/0/0/CPU0:10#
#

#
# Using Rendered
# -----------------
#
- name: >-
    Render platform specific configuration lines (without connecting to the
    device)
  cisco.iosxr.iosxr_bgp_global:
    state: rendered
    config:
      as_number: 1
      default_metric: 4
      vrfs:
        - vrf: vrf3
          bfd:
            minimum_interval: 20
            multiplier: 10
          bgp:
            fast_external_fallover:
              disable: true
            router_id: 1.2.3.4
            auto_policy_soft_reset:
              disable: true
          timers:
            keepalive_time: 20
            holdtime: 30
        - vrf: vrf2
          bgp:
            enforce_first_as:
              disable: true
          default_metric: 4
          neighbors:
            - neighbor: 1.1.1.3
              remote_as: 2
              graceful_maintenance:
                set: true
                activate:
                  inheritance_disable: true
                local_preference:
                  value: 1
                as_prepends:
                  value: 2

#
# Task output
# -----------------------
# rendered:
#   - router bgp 1
#   - default-metric 4
#   - vrf vrf3
#   - bfd multiplier 10
#   - bfd minimum-interval 20
#   - bgp auto-policy-soft-reset disable
#   - bgp fast-external-fallover disable
#   - bgp router-id 1.2.3.4
#   - timers bgp 20 30
#   - vrf vrf2
#   - neighbor 1.1.1.3
#   - remote-as 2
#   - graceful-maintenance
#   - graceful-maintenance activate inheritance-disable
#   - graceful-maintenance local-preference 1
#   - graceful-maintenance as-prepends 2
#   - bgp enforce-first-as disable
#   - default-metric 4

# Using parsed
#
#  parsed.cfg
#  ------------
# router bgp 65536
#  bgp confederation identifier 4
#  bgp router-id 192.0.2.10
#  bgp cluster-id 5
#  default-metric 4
#  socket send-buffer-size 4098
#  bgp bestpath med confed
#  socket receive-buffer-size 514
#  neighbor 192.0.2.11
#   remote-as 65537
#   cluster-id 3
#  !
#  neighbor 192.0.2.14
#   remote-as 65538
#   bfd fast-detect strict-mode
#   bfd multiplier 6
#   bfd minimum-interval 20
#  !
# !
#

- name: Parse externally provided BGP config
  cisco.iosxr.iosxr_bgp_global:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task output
# -----------------------
# parsed:
#     as_number: '65536'
#     bgp:
#       bestpath:
#         med:
#           confed: true
#       cluster_id: '5'
#       confederation:
#         identifier: 4
#       router_id: 192.0.2.10
#     default_metric: 4
#     neighbors:
#     - cluster_id: '3'
#       neighbor_address: 192.0.2.11
#       remote_as: 65537
#     - bfd:
#         fast_detect:
#           strict_mode: true
#         minimum_interval: 20
#         multiplier: 6
#       neighbor_address: 192.0.2.14
#       remote_as: 65538
#     socket:
#       receive_buffer_size: 514
#       send_buffer_size: 4098

# Using gathered
#
# Before state
# ------------
#

# RP/0/0/CPU0:10#show running-config router bgp
# Thu Feb  4 09:38:36.245 UTC
# router bgp 65536
#  bgp confederation identifier 4
#  bgp router-id 192.0.2.10
#  bgp cluster-id 5
#  default-metric 5
#  socket send-buffer-size 4098
#  bgp bestpath med confed
#  socket receive-buffer-size 514
#  neighbor 192.0.2.13
#   remote-as 65538
#   bfd fast-detect strict-mode
#   bfd multiplier 6
#   bfd minimum-interval 20
#  !
#  vrf vrf1
#   default-metric 5
#  !
# !

- name: Gather bgp global facts
  cisco.iosxr.iosxr_bgp_global:
    state: gathered

# Task Output:
# ------------
#
# gathered:
#     as_number: '65536'
#     bgp:
#       bestpath:
#         med:
#           confed: true
#       cluster_id: '5'
#       confederation:
#         identifier: 4
#       router_id: 192.0.2.10
#     default_metric: 5
#     neighbors:
#     - bfd:
#         fast_detect:
#           strict_mode: true
#         minimum_interval: 20
#         multiplier: 6
#       neighbor_address: 192.0.2.13
#       remote_as: 65538
#     socket:
#       receive_buffer_size: 514
#       send_buffer_size: 4098
#     vrfs:
#     - default_metric: 5
#       vrf: vrf1

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
dictionary
when changed
The resulting configuration model invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
dictionary
always
The configuration prior to the model invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list
always
The set of commands pushed to the remote device.

Sample:
['router bgp 65536', 'bgp cluster-id 5', 'bgp router-id 192.0.2.10', 'bgp bestpath med confed']
gathered
list
when state is gathered
Facts about the network resource gathered from the remote device as structured data.

Sample:
This output will always be in the same format as the module argspec.
parsed
list
when state is parsed
The device native config provided in running_config option parsed into structured data as per module argspec.

Sample:
This output will always be in the same format as the module argspec.
rendered
list
when state is rendered
The provided configuration in the task rendered in device-native format (offline).

Sample:
['router bgp 1', 'default-metric 4', 'vrf vrf3']


Authors

  • Ashwini Mhatre (@amhatre)