node_config.go

// Copyright 2019 Antrea Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

package config

import (
	"fmt"
	"net"

	"antrea.io/antrea/pkg/ovs/ovsconfig"
)

const (
	// Invalid ofport_request number is in range 1 to 65,279. For ofport_request number not in the range, OVS
	// ignore the it and automatically assign a port number.
	// Here we use an invalid port number "0" to request for automatically port allocation.
	AutoAssignedOFPort = 0
	DefaultTunOFPort   = 1
	HostGatewayOFPort  = 2
	UplinkOFPort       = 3
	// 0xfffffffe is a reserved port number in OpenFlow protocol, which is dedicated for the Bridge interface.
	BridgeOFPort = 0xfffffffe
)

const (
	vxlanOverhead  = 50
	geneveOverhead = 50
	// GRE overhead: 14-byte outer MAC, 20-byte outer IPv4, 8-byte GRE header (4-byte standard header + 4-byte key field)
	greOverhead = 42

	ipv6ExtraOverhead = 20

	// WireGuard overhead: 20-byte outer IPv4, 8-byte UDP header, 4-byte type, 4-byte key index, 8-byte nonce, 16-byte authentication tag
	WireGuardOverhead = 60
	// IPsec ESP can add a maximum of 38 bytes to the packet including the ESP
	// header and trailer.
	IPSecESPOverhead = 38
)

const (
	L7RedirectTargetPortName = "antrea-l7-tap0"
	L7RedirectReturnPortName = "antrea-l7-tap1"
	L7SuricataSocketPath     = "/var/run/suricata/suricata_eve.socket"
)

const (
	NodeNetworkPolicyIngressRulesChain = "ANTREA-POL-INGRESS-RULES"
	NodeNetworkPolicyEgressRulesChain  = "ANTREA-POL-EGRESS-RULES"

	NodeNetworkPolicyPrefix = "ANTREA-POL"
)

var (
	// VirtualServiceIPv4 or VirtualServiceIPv6 is used in the following scenarios:
	// - The IP is used to perform SNAT for packets of Service sourced from Antrea gateway and destined for external
	//   network via Antrea gateway.
	// - The IP is used as destination IP in host routing entry to forward replied SNATed Service packets back to Antrea
	//   gateway.
	// - The IP is used as the next hop of host routing entry for ClusterIP and virtual NodePort DNAT IP.
	//   The IP cannot be one used in the network, and cannot be within the 169.254.1.0 - 169.254.254.255 range
	//   according to https://datatracker.ietf.org/doc/html/rfc3927#section-2.1
	VirtualServiceIPv4 = net.ParseIP("169.254.0.253")
	VirtualServiceIPv6 = net.ParseIP("fc01::aabb:ccdd:eeff")

	// VirtualNodePortDNATIPv4 or VirtualNodePortDNATIPv6 is used in the following scenarios:
	// - The IP is used to perform DNAT on host for packets of NodePort sourced from local Node or external network.
	// - The IP is used as destination IP in host routing entry to forward DNATed NodePort packets to Antrea gateway
	VirtualNodePortDNATIPv4 = net.ParseIP("169.254.0.252")
	VirtualNodePortDNATIPv6 = net.ParseIP("fc01::aabb:ccdd:eefe")
)

type NodeType uint8

const (
	K8sNode NodeType = iota
	ExternalNode
)

func (t NodeType) String() string {
	switch t {
	case K8sNode:
		return "k8sNode"
	case ExternalNode:
		return "externalNode"
	}
	return "unknown"
}

type GatewayConfig struct {
	// Name is the name of host gateway, e.g. antrea-gw0.
	Name string

	IPv4 net.IP
	IPv6 net.IP
	MAC  net.HardwareAddr
	// LinkIndex is the link index of host gateway.
	LinkIndex int

	// OFPort is the OpenFlow port number of host gateway allocated by OVS.
	OFPort uint32
}

func (g *GatewayConfig) String() string {
	return fmt.Sprintf("Name %s: IPv4 %s, IPv6 %s, MAC %s", g.Name, g.IPv4, g.IPv6, g.MAC)
}

type AdapterNetConfig struct {
	Name       string
	Index      int
	MAC        net.HardwareAddr
	IPs        []*net.IPNet
	MTU        int
	Gateway    string
	DNSServers string
	Routes     []interface{}
	// OFPort is the OpenFlow port number of the uplink interface allocated by OVS.
	OFPort uint32
}

type WireGuardConfig struct {
	// Name is the name of WireGurad interface. e.g. antrea-wg0.
	Name string
	// LinkIndex is the link index of WireGuard interface.
	LinkIndex int
	// Port is the port for the WireGuard to receive traffic.
	Port int
	// The MTU of WireGuard interface.
	MTU int
}

type EgressConfig struct {
	ExceptCIDRs []net.IPNet
}

// Local Node configurations retrieved from K8s API or host networking state.
type NodeConfig struct {
	// The Node's name used in Kubernetes.
	Name string
	// The type to identify it is a Kubernetes Node or an external Node.
	Type NodeType
	// The name of the OpenVSwitch bridge antrea-agent uses.
	OVSBridge string
	// The name of the default tunnel interface. Defaults to "antrea-tun0", but can
	// be overridden by the discovered tunnel interface name from the OVS bridge.
	DefaultTunName string
	// The CIDR block from which to allocate IPv4 address to Pod.
	// It's nil for the networkPolicyOnly trafficEncapMode which doesn't do IPAM.
	PodIPv4CIDR *net.IPNet
	// The CIDR block from where to allocate IPv6 address to Pod.
	// It's nil for the networkPolicyOnly trafficEncapMode which doesn't do IPAM.
	PodIPv6CIDR *net.IPNet
	// The Node's IPv4 address used in Kubernetes. It has the network mask information.
	NodeIPv4Addr *net.IPNet
	// The Node's IPv6 address used in Kubernetes. It has the network mask information.
	NodeIPv6Addr *net.IPNet
	// The name of the Node's transport interface. The transport interface defaults to the interface that has the K8s
	// Node IP, and can be overridden by the configuration parameters TransportInterface and TransportInterfaceCIDRs.
	NodeTransportInterfaceName string
	// The IPv4 address on the Node's transport interface. It is used for tunneling or routing the Pod traffic across Nodes.
	NodeTransportIPv4Addr *net.IPNet
	// The IPv6 address on the Node's transport interface. It is used for tunneling or routing the Pod traffic across Nodes.
	NodeTransportIPv6Addr *net.IPNet
	// The original MTU of the Node's transport interface.
	NodeTransportInterfaceMTU int
	// TunnelOFPort is the OpenFlow port number of tunnel interface allocated by OVS. With noEncap mode, the value is 0.
	TunnelOFPort uint32
	// HostInterfaceOFPort is the OpenFlow port number of the host interface allocated by OVS. The host interface is the
	// one which the IP/MAC of the uplink is moved to. If the host interface is the OVS bridge interface (br-int), the
	// value is config.BridgeOFPort.
	HostInterfaceOFPort uint32
	// The config of the gateway interface on the OVS bridge.
	GatewayConfig *GatewayConfig
	// The config of the OVS bridge uplink interface. Only for Windows Node.
	UplinkNetConfig *AdapterNetConfig
	// The config of the WireGuard interface.
	WireGuardConfig *WireGuardConfig
	// The config of the Egress interface.
	EgressConfig *EgressConfig
}

func (n *NodeConfig) String() string {
	return fmt.Sprintf("NodeName: %s, OVSBridge: %s, PodIPv4CIDR: %s, PodIPv6CIDR: %s, NodeIPv4: %s, NodeIPv6: %s, TransportIPv4: %s, TransportIPv6: %s, Gateway: %s",
		n.Name, n.OVSBridge, n.PodIPv4CIDR, n.PodIPv6CIDR, n.NodeIPv4Addr, n.NodeIPv6Addr, n.NodeTransportIPv4Addr, n.NodeTransportIPv6Addr, n.GatewayConfig)
}

// IPsecConfig includes IPsec related configurations.
type IPsecConfig struct {
	AuthenticationMode IPsecAuthenticationMode
	PSK                string
}

// NetworkConfig includes user provided network configuration parameters.
type NetworkConfig struct {
	TrafficEncapMode      TrafficEncapModeType
	TunnelType            ovsconfig.TunnelType
	TunnelPort            int32
	TunnelCsum            bool
	TrafficEncryptionMode TrafficEncryptionModeType
	IPsecConfig           IPsecConfig
	TransportIface        string
	TransportIfaceCIDRs   []string
	IPv4Enabled           bool
	IPv6Enabled           bool
	// MTUDeduction is the MTU deduction for encapsulation and encryption in cluster.
	MTUDeduction int
	// WireGuardMTUDeduction is the MTU deduction for WireGuard encryption.
	// It is calculated based on whether IPv6 is used.
	WireGuardMTUDeduction int
	// Set by the defaultMTU config option or auto discovered.
	// Auto discovery will use MTU value of the Node's transport interface.
	// For Encap and Hybrid mode, InterfaceMTU will be adjusted to account for
	// encap header.
	InterfaceMTU int

	EnableMulticlusterGW       bool
	MulticlusterEncryptionMode TrafficEncryptionModeType
}

// IsIPv4Enabled returns true if the cluster network supports IPv4. Legal cases are:
// - NetworkPolicyOnly, NodeIPv4Addr != nil, IPv4 is enabled
// - NetworkPolicyOnly, NodeIPv4Addr == nil, IPv4 is disabled
// - Non-NetworkPolicyOnly, PodIPv4CIDR != nil, NodeIPv4Addr != nil, IPv4 is enabled
// - Non-NetworkPolicyOnly, PodIPv4CIDR == nil, IPv4 is disabled
func IsIPv4Enabled(nodeConfig *NodeConfig, trafficEncapMode TrafficEncapModeType) (bool, error) {
	if trafficEncapMode.IsNetworkPolicyOnly() {
		return nodeConfig.NodeIPv4Addr != nil, nil
	}
	if nodeConfig.PodIPv4CIDR != nil {
		if nodeConfig.NodeIPv4Addr != nil {
			return true, nil
		}
		return false, fmt.Errorf("K8s Node should have an IPv4 address if IPv4 Pod CIDR is defined")
	}
	return false, nil
}

// IsIPv6Enabled returns true if the cluster network supports IPv6. Legal cases are:
// - NetworkPolicyOnly, NodeIPv6Addr != nil, IPv6 is enabled
// - NetworkPolicyOnly, NodeIPv6Addr == nil, IPv6 is disabled
// - Non-NetworkPolicyOnly, PodIPv6CIDR != nil, NodeIPv6Addr != nil, IPv6 is enabled
// - Non-NetworkPolicyOnly, PodIPv6CIDR == nil, IPv6 is disabled
func IsIPv6Enabled(nodeConfig *NodeConfig, trafficEncapMode TrafficEncapModeType) (bool, error) {
	if trafficEncapMode.IsNetworkPolicyOnly() {
		return nodeConfig.NodeIPv6Addr != nil, nil
	}
	if nodeConfig.PodIPv6CIDR != nil {
		if nodeConfig.NodeIPv6Addr != nil {
			return true, nil
		}
		return false, fmt.Errorf("K8s Node should have an IPv6 address if IPv6 Pod CIDR is defined")
	}
	return false, nil
}

// NeedsTunnelToPeer returns true if Pod traffic to peer Node needs to be encapsulated by OVS tunneling.
func (nc *NetworkConfig) NeedsTunnelToPeer(peerIP net.IP, localIP *net.IPNet) bool {
	if nc.TrafficEncryptionMode == TrafficEncryptionModeWireGuard {
		return false
	}
	return nc.TrafficEncapMode == TrafficEncapModeEncap || (nc.TrafficEncapMode == TrafficEncapModeHybrid && !localIP.Contains(peerIP))
}

func (nc *NetworkConfig) NeedsTunnelInterface() bool {
	// For encap or hybrid mode, we need to create the tunnel interface, except if we are using
	// WireGuard, in which case inter-Node traffic always goes through the antrea-wg0 interface,
	// and tunneling is managed by Linux, not OVS.
	// If multi-cluster gateway is enabled, we always need the tunnel interface. For example,
	// cross-cluster traffic from a regular Node to the gateway Node for the source cluster
	// always goes through antrea-tun0, regardless of the actual "traffic mode" for the source
	// cluster.
	return (nc.TrafficEncapMode.SupportsEncap() && nc.TrafficEncryptionMode != TrafficEncryptionModeWireGuard) || nc.EnableMulticlusterGW
}

// NeedsDirectRoutingToPeer returns true if Pod traffic to peer Node needs a direct route installed to the routing table.
func (nc *NetworkConfig) NeedsDirectRoutingToPeer(peerIP net.IP, localIP *net.IPNet) bool {
	return (nc.TrafficEncapMode == TrafficEncapModeNoEncap || nc.TrafficEncapMode == TrafficEncapModeHybrid) && localIP.Contains(peerIP)
}

func (nc *NetworkConfig) getEncapMTUDeduction(isIPv6 bool) int {
	var deduction int
	if nc.TunnelType == ovsconfig.VXLANTunnel {
		deduction = vxlanOverhead
	} else if nc.TunnelType == ovsconfig.GeneveTunnel {
		deduction = geneveOverhead
	} else if nc.TunnelType == ovsconfig.GRETunnel {
		deduction = greOverhead
	} else {
		return 0
	}
	if isIPv6 {
		deduction += ipv6ExtraOverhead
	}
	return deduction
}

func (nc *NetworkConfig) CalculateMTUDeduction(isIPv6 bool) int {
	nc.WireGuardMTUDeduction = WireGuardOverhead
	if isIPv6 {
		nc.WireGuardMTUDeduction += ipv6ExtraOverhead
	}

	if nc.EnableMulticlusterGW {
		nc.MTUDeduction = nc.getEncapMTUDeduction(isIPv6)
		// When multi-cluster WireGuard is enabled, cross-cluster traffic will be encapsulated and encrypted, we need to
		// reduce MTU for both encapsulation and encryption.
		if nc.MulticlusterEncryptionMode == TrafficEncryptionModeWireGuard {
			nc.MTUDeduction += nc.WireGuardMTUDeduction
		}
		return nc.MTUDeduction
	}
	if nc.TrafficEncapMode.SupportsEncap() {
		nc.MTUDeduction = nc.getEncapMTUDeduction(isIPv6)
	}
	if nc.TrafficEncryptionMode == TrafficEncryptionModeWireGuard {
		// When WireGuard is enabled, cross-node traffic will only be encrypted, just reduce MTU for encryption.
		nc.MTUDeduction = nc.WireGuardMTUDeduction
	} else if nc.TrafficEncryptionMode == TrafficEncryptionModeIPSec {
		// When IPsec is enabled, cross-node traffic will be encapsulated and encrypted, we need to reduce MTU for both
		// encapsulation and encryption.
		nc.MTUDeduction += IPSecESPOverhead
	}
	return nc.MTUDeduction
}

// ServiceConfig includes K8s Service CIDR and available IP addresses for NodePort.
type ServiceConfig struct {
	ServiceCIDR           *net.IPNet // K8s Service ClusterIP CIDR
	ServiceCIDRv6         *net.IPNet // K8s Service ClusterIP CIDR in IPv6
	NodePortAddressesIPv4 []net.IP
	NodePortAddressesIPv6 []net.IP
}

// L7NetworkPolicyConfig includes target and return ofPorts for L7 NetworkPolicy.
type L7NetworkPolicyConfig struct {
	TargetOFPort uint32 // Matched L7 NetworkPolicy traffic is forwarded to an application-aware engine via this ofPort.
	ReturnOFPort uint32 // Scanned L7 NetworkPolicy traffic is returned from an application-aware engine via this ofPort.
}