Skip to content

Latest commit

 

History

History
119 lines (86 loc) · 3.49 KB

msds-en.md

File metadata and controls

119 lines (86 loc) · 3.49 KB
Raw
title logo titlepage
Material Safety Data Sheet
logo.png
true

Identification
Product Name Face Shield
Product Code COVID-FACE-SHIELD
Use(s) Face protection from splash and other debris
Company Name Made in 3D Canada Inc. (dba AON3D)
Telephone +1 833-772-6633

Hazard Identification
Potential Hazard Combustible
Other Comments N/A

Composition/Information on Ingredients

Component Material(s)
Frame ABS, HIPS, or Acrylic
Visor Polycarbonate, PETG, PET, Acetal, PVC, or Polypropylene
Strap Polyester, Rubber, Polypropylene, and/or Nylon
Buckle Plastic

First-aid Measures
Inhalation (breathing) In case of inhalation of smoke or burnt, consult physician.

Fire-fighting Measures
Flashpoint N/A
Flammable class Burnable
Extinguishing media Class A fire extinguisher
General hazard Evacuate personal downwind of fire to avoid inhalation of irritation or harmful fumes and smoke.
Hazardous combustion products Harmful gases

Accidental Release Measures

Collect and treat according to local plastics waste procedures.

Handling and Storage
Handling & Storage Keep away from flammable substances and ignition sources, and store in cool and dry condition.

Exposure Controls/Personal Protection
Breath protection Not required
Skin protection Not required
Ventilation Not required

Physical and Chemical Properties
Appearance Colour varies

Stability and Reactivity
Chemical Stability Stable under normal room conditions of temperature and pressure.
Incompatible products None
Hazardous decomposition product N/A

Toxicological Information
Toxicity The product is non-toxic.
Eye/skin/sensitization effect This product is not expected to cause significant irritation.

Ecological Information

Not biodegradable.

Disposal Considerations

Treat according to the local plastics waste procedures.

Transport Information

Not regulated or restricted.

Regulatory Information

Minimum Specifications in Urgent Manufacturing Scenarios

  • Device must provide adequate coverage (CSA Z94.3 Sections 10.2.1/10.2.2/10.3/10.4).
  • Device should made of optically clear, distortion free, lightweight materials (CSA Standard Z94.3.1-16)
  • Device should be free of visible defects or flaws that would impede vision (ANSI Z87.1 Section 9.4)
  • The device should allow adequate space between the wearer’s face and the inner surface of the visor to allow for the use of ancillary equipment (medical/surgical mask, respirator, eyewear, etc.)
  • Device should fit snugly to afford a good seal to the forehead area and to prevent slippage of the device
  • Device should withstand impact from sharp or fast projectiles (ANSI Z87.1 Section 9.2 and 9.3, CSA Z94.3 Section 10.1)
  • If available, device should display anti-fog behavior on inside and outside of shield. (CSA Standard Z94.3.1-16)
  • User contacting materials should provide adequate material biocompatibility (skin sensitivity and cytotoxic testing) (ISO 10993-5, 10)

Other Information

The information furnished herein is believed to be accurate and represents the best data currently available to us. No warranty, expressed or implied, is made and AON3D assumes no legal responsibility or liability resulting from its use. Use product for intended purpose only.