consumer.go

// Licensed to the Apache Software Foundation (ASF) under one
// or more contributor license agreements.  See the NOTICE file
// distributed with this work for additional information
// regarding copyright ownership.  The ASF licenses this file
// to you under the Apache License, Version 2.0 (the
// "License"); you may not use this file except in compliance
// with the License.  You may obtain a copy of the License at
//
//   http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing,
// software distributed under the License is distributed on an
// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
// KIND, either express or implied.  See the License for the
// specific language governing permissions and limitations
// under the License.

package pulsar

import (
	"context"
	"time"

	"github.com/apache/pulsar-client-go/pulsar/internal"
)

// ConsumerMessage represents a pair of a Consumer and Message.
type ConsumerMessage struct {
	Consumer
	Message
}

// SubscriptionType of subscription supported by Pulsar
type SubscriptionType int

const (
	// Exclusive there can be only 1 consumer on the same topic with the same subscription name
	Exclusive SubscriptionType = iota

	// Shared subscription mode, multiple consumer will be able to use the same subscription name
	// and the messages will be dispatched according to
	// a round-robin rotation between the connected consumers
	Shared

	// Failover subscription mode, multiple consumer will be able to use the same subscription name
	// but only 1 consumer will receive the messages.
	// If that consumer disconnects, one of the other connected consumers will start receiving messages.
	Failover

	// KeyShared subscription mode, multiple consumer will be able to use the same
	// subscription and all messages with the same key will be dispatched to only one consumer
	KeyShared
)

type SubscriptionInitialPosition int

const (
	// SubscriptionPositionLatest is the latest position which means the start consuming position
	// will be the last message
	SubscriptionPositionLatest SubscriptionInitialPosition = iota

	// SubscriptionPositionEarliest is the earliest position which means the start consuming position
	// will be the first message
	SubscriptionPositionEarliest
)

// DLQPolicy represents the configuration for the Dead Letter Queue consumer policy.
type DLQPolicy struct {
	// MaxDeliveries specifies the maximum number of times that a message will be delivered before being
	// sent to the dead letter queue.
	MaxDeliveries uint32

	// DeadLetterTopic specifies the name of the topic where the failing messages will be sent.
	DeadLetterTopic string

	// ProducerOptions is the producer options to produce messages to the DLQ and RLQ topic
	ProducerOptions ProducerOptions

	// RetryLetterTopic specifies the name of the topic where the retry messages will be sent.
	RetryLetterTopic string
}

// AckGroupingOptions controls how to group ACK requests
// If maxSize is 0 or 1, any ACK request will be sent immediately.
// Otherwise, the ACK requests will be cached until one of the following conditions meets:
// 1. There are `MaxSize` pending ACK requests.
// 2. `MaxTime` is greater than 1 microsecond and ACK requests have been cached for `maxTime`.
// Specially, for cumulative acknowledgment, only the latest ACK is cached and it will only be sent after `MaxTime`.
type AckGroupingOptions struct {
	// The maximum number of ACK requests to cache
	MaxSize uint32

	// The maximum time to cache ACK requests
	MaxTime time.Duration
}

// ConsumerOptions is used to configure and create instances of Consumer.
type ConsumerOptions struct {
	// Topic specifies the topic this consumer will subscribe on.
	// Either a topic, a list of topics or a topics pattern are required when subscribing
	Topic string

	// Topics specifies a list of topics this consumer will subscribe on.
	// Either a topic, a list of topics or a topics pattern are required when subscribing
	Topics []string

	// TopicsPattern specifies a regular expression to subscribe to multiple topics under the same namespace.
	// Either a topic, a list of topics or a topics pattern are required when subscribing
	TopicsPattern string

	// AutoDiscoveryPeriod specifies the interval in which to poll for new partitions or new topics
	// if using a TopicsPattern.
	AutoDiscoveryPeriod time.Duration

	// SubscriptionName specifies the subscription name for this consumer
	// This argument is required when subscribing
	SubscriptionName string

	// Properties represents a set of application defined properties for the consumer.
	// Those properties will be visible in the topic stats
	Properties map[string]string

	// SubscriptionProperties specify the subscription properties for this subscription.
	//
	// > Notice: SubscriptionProperties are immutable, and consumers under the same subscription will fail to create a
	// > subscription if they use different properties.
	SubscriptionProperties map[string]string

	// Type specifies the subscription type to be used when subscribing to a topic.
	// Default is `Exclusive`
	Type SubscriptionType

	// SubscriptionInitialPosition is the initial position at which the cursor will be set when subscribe
	// Default is `Latest`
	SubscriptionInitialPosition

	// EventListener will be called when active consumer changed (in failover subscription type)
	EventListener ConsumerEventListener

	// DLQ represents the configuration for Dead Letter Queue consumer policy.
	// eg. route the message to topic X after N failed attempts at processing it
	// By default is nil and there's no DLQ
	DLQ *DLQPolicy

	// KeySharedPolicy represents the configuration for Key Shared consumer policy.
	KeySharedPolicy *KeySharedPolicy

	// RetryEnable determines whether to automatically retry sending messages to default filled DLQPolicy topics.
	// Default is false
	RetryEnable bool

	// MessageChannel sets a `MessageChannel` for the consumer
	// When a message is received, it will be pushed to the channel for consumption
	MessageChannel chan ConsumerMessage

	// ReceiverQueueSize sets the size of the consumer receive queue.
	// The consumer receive queue controls how many messages can be accumulated by the `Consumer` before the
	// application calls `Consumer.receive()`. Using a higher value could potentially increase the consumer
	// throughput at the expense of bigger memory utilization.
	// Default value is `1000` messages and should be good for most use cases.
	ReceiverQueueSize int

	// EnableAutoScaledReceiverQueueSize, if enabled, the consumer receive queue will be auto-scaled
	// by the consumer actual throughput. The ReceiverQueueSize will be the maximum size which consumer
	// receive queue can be scaled.
	// Default is false.
	EnableAutoScaledReceiverQueueSize bool

	// NackRedeliveryDelay specifies the delay after which to redeliver the messages that failed to be
	// processed. Default is 1 min. (See `Consumer.Nack()`)
	NackRedeliveryDelay time.Duration

	// Name specifies the consumer name.
	Name string

	// ReadCompacted, if enabled, the consumer will read messages from the compacted topic rather than reading the
	// full message backlog of the topic. This means that, if the topic has been compacted, the consumer will only
	// see the latest value for each key in the topic, up until the point in the topic message backlog that has been
	// compacted. Beyond that point, the messages will be sent as normal.
	//
	// ReadCompacted can only be enabled subscriptions to persistent topics, which have a single active consumer (i.e.
	//  failure or exclusive subscriptions). Attempting to enable it on subscriptions to a non-persistent topics or on a
	//  shared subscription, will lead to the subscription call throwing a PulsarClientException.
	ReadCompacted bool

	// ReplicateSubscriptionState marks the subscription as replicated to keep it in sync across clusters
	ReplicateSubscriptionState bool

	// Interceptors is a chain of interceptors. These interceptors will be called at some points defined in
	// ConsumerInterceptor interface.
	Interceptors ConsumerInterceptors

	// Schema represents the schema implementation.
	Schema Schema

	// MaxReconnectToBroker sets the maximum retry number of reconnectToBroker. (default: ultimate)
	MaxReconnectToBroker *uint

	// BackoffPolicy parameterize the following options in the reconnection logic to
	// allow users to customize the reconnection logic (minBackoff, maxBackoff and jitterPercentage)
	BackoffPolicy internal.BackoffPolicy

	// Decryption represents the encryption related fields required by the consumer to decrypt a message.
	Decryption *MessageDecryptionInfo

	// EnableDefaultNackBackoffPolicy, if enabled, the default implementation of NackBackoffPolicy will be used
	// to calculate the delay time of
	// nack backoff, Default: false.
	EnableDefaultNackBackoffPolicy bool

	// NackBackoffPolicy is a redelivery backoff mechanism which we can achieve redelivery with different
	// delays according to the number of times the message is retried.
	//
	// > Notice: the NackBackoffPolicy will not work with `consumer.NackID(MessageID)`
	// > because we are not able to get the redeliveryCount from the message ID.
	NackBackoffPolicy NackBackoffPolicy

	// AckWithResponse is a return value added to Ack Command, and its purpose is to confirm whether Ack Command
	// is executed correctly on the Broker side. When set to true, the error information returned by the Ack
	// method contains the return value of the Ack Command processed by the Broker side; when set to false, the
	// error information of the Ack method only contains errors that may occur in the Go SDK's own processing.
	// Default: false
	AckWithResponse bool

	// MaxPendingChunkedMessage sets the maximum pending chunked messages. (default: 100)
	MaxPendingChunkedMessage int

	// ExpireTimeOfIncompleteChunk sets the expiry time of discarding incomplete chunked message. (default: 60 seconds)
	ExpireTimeOfIncompleteChunk time.Duration

	// AutoAckIncompleteChunk sets whether consumer auto acknowledges incomplete chunked message when it should
	// be removed (e.g.the chunked message pending queue is full). (default: false)
	AutoAckIncompleteChunk bool

	// Enable or disable batch index acknowledgment. To enable this feature, ensure batch index acknowledgment
	// is enabled on the broker side. (default: false)
	EnableBatchIndexAcknowledgment bool

	// Controls how to group ACK requests, the default value is nil, which means:
	// MaxSize: 1000
	// MaxTime: 100*time.Millisecond
	// NOTE: This option does not work if AckWithResponse is true
	//	because there are only synchronous APIs for acknowledgment
	AckGroupingOptions *AckGroupingOptions

	// SubscriptionMode specifies the subscription mode to be used when subscribing to a topic.
	// Default is `Durable`
	SubscriptionMode SubscriptionMode
}

// Consumer is an interface that abstracts behavior of Pulsar's consumer
type Consumer interface {
	// Subscription get a subscription for the consumer
	Subscription() string

	// Unsubscribe the consumer
	//
	// Unsubscribing will cause the subscription to be deleted,
	// and all the retained data can potentially be deleted based on message retention and ttl policy.
	//
	// This operation will fail when performed on a shared subscription
	// where more than one consumer are currently connected.
	Unsubscribe() error

	// Receive a single message.
	// This calls blocks until a message is available.
	Receive(context.Context) (Message, error)

	// Chan returns a channel to consume messages from
	Chan() <-chan ConsumerMessage

	// Ack the consumption of a single message
	Ack(Message) error

	// AckID the consumption of a single message, identified by its MessageID
	AckID(MessageID) error

	// AckWithTxn the consumption of a single message with a transaction
	AckWithTxn(Message, Transaction) error

	// AckCumulative the reception of all the messages in the stream up to (and including)
	// the provided message.
	AckCumulative(msg Message) error

	// AckIDCumulative the reception of all the messages in the stream up to (and including)
	// the provided message, identified by its MessageID
	AckIDCumulative(msgID MessageID) error

	// ReconsumeLater mark a message for redelivery after custom delay
	ReconsumeLater(msg Message, delay time.Duration)

	// ReconsumeLaterWithCustomProperties mark a message for redelivery after custom delay with custom properties
	ReconsumeLaterWithCustomProperties(msg Message, customProperties map[string]string, delay time.Duration)

	// Nack acknowledges the failure to process a single message.
	//
	// When a message is "negatively acked" it will be marked for redelivery after
	// some fixed delay. The delay is configurable when constructing the consumer
	// with ConsumerOptions.NackRedeliveryDelay .
	//
	// This call is not blocking.
	Nack(Message)

	// NackID acknowledges the failure to process a single message.
	//
	// When a message is "negatively acked" it will be marked for redelivery after
	// some fixed delay. The delay is configurable when constructing the consumer
	// with ConsumerOptions.NackRedeliveryDelay .
	//
	// This call is not blocking.
	NackID(MessageID)

	// Close the consumer and stop the broker to push more messages
	Close()

	// Seek resets the subscription associated with this consumer to a specific message id.
	// The message id can either be a specific message or represent the first or last messages in the topic.
	//
	// Note: this operation can only be done on non-partitioned topics. For these, one can rather perform the
	//       seek() on the individual partitions.
	Seek(MessageID) error

	// SeekByTime resets the subscription associated with this consumer to a specific message publish time.
	//
	// @param time
	//            the message publish time when to reposition the subscription
	//
	SeekByTime(time time.Time) error

	// Name returns the name of consumer.
	Name() string
}