layout	title	displayTitle	license
global	ALTER TABLE	ALTER TABLE	Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to You under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Description

ALTER TABLE statement changes the schema or properties of a table.

RENAME

ALTER TABLE RENAME TO statement changes the table name of an existing table in the database. The table rename command cannot be used to move a table between databases, only to rename a table within the same database.

If the table is cached, the commands clear cached data of the table. The cache will be lazily filled when the next time the table is accessed. Additionally:

the table rename command uncaches all table's dependents such as views that refer to the table. The dependents should be cached again explicitly.
the partition rename command clears caches of all table dependents while keeping them as cached. So, their caches will be lazily filled when the next time they are accessed.

Syntax

ALTER TABLE table_identifier RENAME TO table_identifier

ALTER TABLE table_identifier partition_spec RENAME TO partition_spec

Parameters

table_identifier

Specifies a table name, which may be optionally qualified with a database name.

Syntax: [ database_name. ] table_name
partition_spec

Partition to be renamed. Note that one can use a typed literal (e.g., date'2019-01-02') in the partition spec.

Syntax: PARTITION ( partition_col_name = partition_col_val [ , ... ] )

ADD COLUMNS

ALTER TABLE ADD COLUMNS statement adds mentioned columns to an existing table.

Syntax

ALTER TABLE table_identifier ADD COLUMNS ( col_spec [ , ... ] )

Parameters

table_identifier

Specifies a table name, which may be optionally qualified with a database name.

Syntax: [ database_name. ] table_name
COLUMNS ( col_spec )

Specifies the columns to be added.

DROP COLUMNS

ALTER TABLE DROP COLUMNS statement drops mentioned columns from an existing table. Note that this statement is only supported with v2 tables.

Syntax

ALTER TABLE table_identifier DROP { COLUMN | COLUMNS } [ ( ] col_name [ , ... ] [ ) ]

Parameters

table_identifier

Specifies a table name, which may be optionally qualified with a database name.

Syntax: [ database_name. ] table_name
col_name

Specifies the name of the column.

RENAME COLUMN

ALTER TABLE RENAME COLUMN statement changes the column name of an existing table. Note that this statement is only supported with v2 tables.

Syntax

ALTER TABLE table_identifier RENAME COLUMN col_name TO col_name

Parameters

table_identifier

Specifies a table name, which may be optionally qualified with a database name.

Syntax: [ database_name. ] table_name
col_name

Specifies the name of the column.

ALTER OR CHANGE COLUMN

ALTER TABLE ALTER COLUMN or ALTER TABLE CHANGE COLUMN statement changes column's definition.

Syntax

ALTER TABLE table_identifier { ALTER | CHANGE } [ COLUMN ] col_name alterColumnAction

Parameters

table_identifier

Specifies a table name, which may be optionally qualified with a database name.

Syntax: [ database_name. ] table_name
col_name

Specifies the name of the column.
alterColumnAction

Change column's definition.

REPLACE COLUMNS

ALTER TABLE REPLACE COLUMNS statement removes all existing columns and adds the new set of columns. Note that this statement is only supported with v2 tables.

Syntax

ALTER TABLE table_identifier [ partition_spec ] REPLACE COLUMNS  
  [ ( ] qualified_col_type_with_position_list [ ) ]

Parameters

table_identifier

Specifies a table name, which may be optionally qualified with a database name.

Syntax: [ database_name. ] table_name
partition_spec

Partition to be replaced. Note that one can use a typed literal (e.g., date'2019-01-02') in the partition spec.

Syntax: PARTITION ( partition_col_name = partition_col_val [ , ... ] )
qualified_col_type_with_position_list

The list of the column(s) to be added

Syntax: col_name col_type [ col_comment ] [ col_position ] [ , ... ]

ADD AND DROP PARTITION

ADD PARTITION

ALTER TABLE ADD statement adds partition to the partitioned table.

If the table is cached, the command clears cached data of the table and all its dependents that refer to it. The cache will be lazily filled when the next time the table or the dependents are accessed.

Syntax

ALTER TABLE table_identifier ADD [IF NOT EXISTS] 
    ( partition_spec [ partition_spec ... ] )

Parameters

table_identifier

Specifies a table name, which may be optionally qualified with a database name.

Syntax: [ database_name. ] table_name
partition_spec

Partition to be added. Note that one can use a typed literal (e.g., date'2019-01-02') in the partition spec.

Syntax: PARTITION ( partition_col_name = partition_col_val [ , ... ] )

DROP PARTITION

ALTER TABLE DROP statement drops the partition of the table.

If the table is cached, the command clears cached data of the table and all its dependents that refer to it. The cache will be lazily filled when the next time the table or the dependents are accessed.

Syntax

ALTER TABLE table_identifier DROP [ IF EXISTS ] partition_spec [PURGE]

Parameters

table_identifier

Specifies a table name, which may be optionally qualified with a database name.

Syntax: [ database_name. ] table_name
partition_spec

Partition to be dropped. Note that one can use a typed literal (e.g., date'2019-01-02') in the partition spec.

Syntax: PARTITION ( partition_col_name = partition_col_val [ , ... ] )

SET AND UNSET

SET TABLE PROPERTIES

ALTER TABLE SET command is used for setting the table properties. If a particular property was already set, this overrides the old value with the new one.

ALTER TABLE UNSET is used to drop the table property.

Syntax

-- Set Table Properties 
ALTER TABLE table_identifier SET TBLPROPERTIES ( key1 = val1, key2 = val2, ... )

-- Unset Table Properties
ALTER TABLE table_identifier UNSET TBLPROPERTIES [ IF EXISTS ] ( key1, key2, ... )

SET SERDE

ALTER TABLE SET command is used for setting the SERDE or SERDE properties in Hive tables. If a particular property was already set, this overrides the old value with the new one.

Syntax

-- Set SERDE Properties
ALTER TABLE table_identifier [ partition_spec ]
    SET SERDEPROPERTIES ( key1 = val1, key2 = val2, ... )

ALTER TABLE table_identifier [ partition_spec ] SET SERDE serde_class_name
    [ WITH SERDEPROPERTIES ( key1 = val1, key2 = val2, ... ) ]

SET LOCATION And SET FILE FORMAT

ALTER TABLE SET command can also be used for changing the file location and file format for existing tables.

If the table is cached, the ALTER TABLE .. SET LOCATION command clears cached data of the table and all its dependents that refer to it. The cache will be lazily filled when the next time the table or the dependents are accessed.

Syntax

-- Changing File Format
ALTER TABLE table_identifier [ partition_spec ] SET FILEFORMAT file_format

-- Changing File Location
ALTER TABLE table_identifier [ partition_spec ] SET LOCATION 'new_location'

Parameters

table_identifier

Specifies a table name, which may be optionally qualified with a database name.

Syntax: [ database_name. ] table_name
partition_spec

Specifies the partition on which the property has to be set. Note that one can use a typed literal (e.g., date'2019-01-02') in the partition spec.

Syntax: PARTITION ( partition_col_name = partition_col_val [ , ... ] )
SERDEPROPERTIES ( key1 = val1, key2 = val2, ... )

Specifies the SERDE properties to be set.

RECOVER PARTITIONS

ALTER TABLE RECOVER PARTITIONS statement recovers all the partitions in the directory of a table and updates the Hive metastore. Another way to recover partitions is to use MSCK REPAIR TABLE.

Syntax

ALTER TABLE table_identifier RECOVER PARTITIONS

Parameters

table_identifier

Specifies a table name, which may be optionally qualified with a database name.

Syntax: [ database_name. ] table_name

Examples

-- RENAME table 
DESC student;
+-----------------------+---------+-------+
|               col_name|data_type|comment|
+-----------------------+---------+-------+
|                   name|   string|   NULL|
|                 rollno|      int|   NULL|
|                    age|      int|   NULL|
|# Partition Information|         |       |
|             # col_name|data_type|comment|
|                    age|      int|   NULL|
+-----------------------+---------+-------+

ALTER TABLE Student RENAME TO StudentInfo;

-- After Renaming the table
DESC StudentInfo;
+-----------------------+---------+-------+
|               col_name|data_type|comment|
+-----------------------+---------+-------+
|                   name|   string|   NULL|
|                 rollno|      int|   NULL|
|                    age|      int|   NULL|
|# Partition Information|         |       |
|             # col_name|data_type|comment|
|                    age|      int|   NULL|
+-----------------------+---------+-------+

-- RENAME partition

SHOW PARTITIONS StudentInfo;
+---------+
|partition|
+---------+
|   age=10|
|   age=11|
|   age=12|
+---------+

ALTER TABLE default.StudentInfo PARTITION (age='10') RENAME TO PARTITION (age='15');

-- After renaming Partition
SHOW PARTITIONS StudentInfo;
+---------+
|partition|
+---------+
|   age=11|
|   age=12|
|   age=15|
+---------+

-- Add new columns to a table
DESC StudentInfo;
+-----------------------+---------+-------+
|               col_name|data_type|comment|
+-----------------------+---------+-------+
|                   name|   string|   NULL|
|                 rollno|      int|   NULL|
|                    age|      int|   NULL|
|# Partition Information|         |       |
|             # col_name|data_type|comment|
|                    age|      int|   NULL|
+-----------------------+---------+-------+

ALTER TABLE StudentInfo ADD columns (LastName string, DOB timestamp);

-- After Adding New columns to the table
DESC StudentInfo;
+-----------------------+---------+-------+
|               col_name|data_type|comment|
+-----------------------+---------+-------+
|                   name|   string|   NULL|
|                 rollno|      int|   NULL|
|               LastName|   string|   NULL|
|                    DOB|timestamp|   NULL|
|                    age|      int|   NULL|
|# Partition Information|         |       |
|             # col_name|data_type|comment|
|                    age|      int|   NULL|
+-----------------------+---------+-------+

-- Drop columns of a table
DESC StudentInfo;
+-----------------------+---------+-------+
|               col_name|data_type|comment|
+-----------------------+---------+-------+
|                   name|   string|   NULL|
|                 rollno|      int|   NULL|
|               LastName|   string|   NULL|
|                    DOB|timestamp|   NULL|
|                    age|      int|   NULL|
|# Partition Information|         |       |
|             # col_name|data_type|comment|
|                    age|      int|   NULL|
+-----------------------+---------+-------+

ALTER TABLE StudentInfo DROP columns (LastName, DOB);

-- After dropping columns of the table
DESC StudentInfo;
+-----------------------+---------+-------+
|               col_name|data_type|comment|
+-----------------------+---------+-------+
|                   name|   string|   NULL|
|                 rollno|      int|   NULL|
|                    age|      int|   NULL|
|# Partition Information|         |       |
|             # col_name|data_type|comment|
|                    age|      int|   NULL|
+-----------------------+---------+-------+

-- Rename a column of a table
DESC StudentInfo;
+-----------------------+---------+-------+
|               col_name|data_type|comment|
+-----------------------+---------+-------+
|                   name|   string|   NULL|
|                 rollno|      int|   NULL|
|                    age|      int|   NULL|
|# Partition Information|         |       |
|             # col_name|data_type|comment|
|                    age|      int|   NULL|
+-----------------------+---------+-------+

ALTER TABLE StudentInfo RENAME COLUMN name TO FirstName;

-- After renaming a column of the table
DESC StudentInfo;
+-----------------------+---------+-------+
|               col_name|data_type|comment|
+-----------------------+---------+-------+
|              FirstName|   string|   NULL|
|                 rollno|      int|   NULL|
|                    age|      int|   NULL|
|# Partition Information|         |       |
|             # col_name|data_type|comment|
|                    age|      int|   NULL|
+-----------------------+---------+-------+

-- ALTER OR CHANGE COLUMNS
DESC StudentInfo;
+-----------------------+---------+-------+
|               col_name|data_type|comment|
+-----------------------+---------+-------+
|              FirstName|   string|   NULL|
|                 rollno|      int|   NULL|
|                    age|      int|   NULL|
|# Partition Information|         |       |
|             # col_name|data_type|comment|
|                    age|      int|   NULL|
+-----------------------+---------+-------+

ALTER TABLE StudentInfo ALTER COLUMN FirstName COMMENT "new comment";

-- After ALTER or CHANGE COLUMNS
DESC StudentInfo;
+-----------------------+---------+-----------+
|               col_name|data_type|    comment|
+-----------------------+---------+-----------+
|              FirstName|   string|new comment|
|                 rollno|      int|       NULL|
|                    age|      int|       NULL|
|# Partition Information|         |           |
|             # col_name|data_type|    comment|
|                    age|      int|       NULL|
+-----------------------+---------+-----------+

-- REPLACE COLUMNS
DESC StudentInfo;
+-----------------------+---------+-----------+
|               col_name|data_type|    comment|
+-----------------------+---------+-----------+
|              FirstName|   string|new comment|
|                 rollno|      int|       NULL|
|                    age|      int|       NULL|
|# Partition Information|         |           |
|             # col_name|data_type|    comment|
|                    age|      int|       NULL|
+-----------------------+---------+-----------+

ALTER TABLE StudentInfo REPLACE COLUMNS (name string, ID int COMMENT 'new comment');

-- After replacing COLUMNS
DESC StudentInfo;
+-----=---------+---------+-----------+
|       col_name|data_type|    comment|
+---------------+---------+-----------+
|           name|   string|       NULL|
|             ID|      int|new comment|
| # Partitioning|         |           |
|Not partitioned|         |           |
+---------------+---------+-----------+

-- Add a new partition to a table 
SHOW PARTITIONS StudentInfo;
+---------+
|partition|
+---------+
|   age=11|
|   age=12|
|   age=15|
+---------+

ALTER TABLE StudentInfo ADD IF NOT EXISTS PARTITION (age=18);

-- After adding a new partition to the table
SHOW PARTITIONS StudentInfo;
+---------+
|partition|
+---------+
|   age=11|
|   age=12|
|   age=15|
|   age=18|
+---------+

-- Drop a partition from the table 
SHOW PARTITIONS StudentInfo;
+---------+
|partition|
+---------+
|   age=11|
|   age=12|
|   age=15|
|   age=18|
+---------+

ALTER TABLE StudentInfo DROP IF EXISTS PARTITION (age=18);

-- After dropping the partition of the table
SHOW PARTITIONS StudentInfo;
+---------+
|partition|
+---------+
|   age=11|
|   age=12|
|   age=15|
+---------+

-- Adding multiple partitions to the table
SHOW PARTITIONS StudentInfo;
+---------+
|partition|
+---------+
|   age=11|
|   age=12|
|   age=15|
+---------+

ALTER TABLE StudentInfo ADD IF NOT EXISTS PARTITION (age=18) PARTITION (age=20);

-- After adding multiple partitions to the table
SHOW PARTITIONS StudentInfo;
+---------+
|partition|
+---------+
|   age=11|
|   age=12|
|   age=15|
|   age=18|
|   age=20|
+---------+

-- Change the fileformat
ALTER TABLE loc_orc SET fileformat orc;

ALTER TABLE p1 partition (month=2, day=2) SET fileformat parquet;

-- Change the file Location
ALTER TABLE dbx.tab1 PARTITION (a='1', b='2') SET LOCATION '/path/to/part/ways'

-- SET SERDE/ SERDE Properties
ALTER TABLE test_tab SET SERDE 'org.apache.hadoop.hive.serde2.columnar.LazyBinaryColumnarSerDe';

ALTER TABLE dbx.tab1 SET SERDE 'org.apache.hadoop' WITH SERDEPROPERTIES ('k' = 'v', 'kay' = 'vee')

-- SET TABLE PROPERTIES
ALTER TABLE dbx.tab1 SET TBLPROPERTIES ('winner' = 'loser');

-- SET TABLE COMMENT Using SET PROPERTIES
ALTER TABLE dbx.tab1 SET TBLPROPERTIES ('comment' = 'A table comment.');

-- Alter TABLE COMMENT Using SET PROPERTIES
ALTER TABLE dbx.tab1 SET TBLPROPERTIES ('comment' = 'This is a new comment.');

-- DROP TABLE PROPERTIES
ALTER TABLE dbx.tab1 UNSET TBLPROPERTIES ('winner');

-- RECOVER PARTITIONS
ALTER TABLE dbx.tab1 RECOVER PARTITIONS;

Related Statements

CREATE TABLE
DROP TABLE

Files

sql-ref-syntax-ddl-alter-table.md

Latest commit

History

sql-ref-syntax-ddl-alter-table.md

File metadata and controls

Description

RENAME

Syntax

Parameters

ADD COLUMNS

Syntax

Parameters

DROP COLUMNS

Syntax

Parameters

RENAME COLUMN

Syntax

Parameters

ALTER OR CHANGE COLUMN

Syntax

Parameters

REPLACE COLUMNS

Syntax

Parameters

ADD AND DROP PARTITION

ADD PARTITION

Syntax

Parameters

DROP PARTITION

Syntax

Parameters

SET AND UNSET

SET TABLE PROPERTIES

Syntax

SET SERDE

Syntax

SET LOCATION And SET FILE FORMAT

Syntax

Parameters

RECOVER PARTITIONS

Syntax

Parameters

Examples

Related Statements