constants.go

package packet

const (
	// minIPPacketLen is the min ip packet size for TCP packet
	minTCPIPPacketLen = 20

	// minIPPacketLen is the min ip packet size for UDP packet
	minUDPIPPacketLen = 8

	// minICMPPacketLen is the min ip packet size for ICMP packet
	minICMPIPPacketLen = 8

	// minIPHdrSize
	minIPv4HdrSize = 20

	// minTCPHeaderLen is the min TCP header length
	minTCPHeaderLen = 20
)

// IP Header field position constants
const (
	// ipHdrLenPos is location of IP (entire packet) length
	ipv4HdrLenPos = 0

	// ipLengthPos is location of IP (entire packet) length
	ipv4LengthPos = 2

	// ipIDPos is location of IP Identifier
	ipv4IDPos = 4

	// ipProtoPos is the location of the IP Protocol
	ipv4ProtoPos = 9

	// ipChecksumPos is location of IP checksum
	ipv4ChecksumPos = 10

	// ipSourceAddrPos is location of source IP address
	ipv4SourceAddrPos = 12

	// ipDestAddrPos is location of destination IP address
	ipv4DestAddrPos = 16
)

const (
	// ipv6HeaderLen is the length of the ipv6 header
	ipv6HeaderLen = 40

	// ipv6VersionPos is the position in the buffer where the version is stored
	ipv6VersionPos = 0

	// ipv6PayloadLenPos is the position in the buffer where the size of the payload is stored
	ipv6PayloadLenPos = 4

	// ipv6ProtoPos is the position in the buffer where the protocol(tcp/udp) is stored
	ipv6ProtoPos = 6

	// ipv6SourceAddrPos is the position in the buffer where ipv6 source address is stored
	ipv6SourceAddrPos = 8

	// ipv6DestAddrPos is the position in the buffer where ipv6 dest address is stored
	ipv6DestAddrPos = 24
)

// IP Protocol numbers
const (
	// IPProtocolTCP defines the constant for TCP protocol number
	IPProtocolTCP = 6

	// IPProtocolUDP defines the constant for UDP protocol number
	IPProtocolUDP = 17

	// IPProtocolICMP defines the constants for ICMP protocol number
	IPProtocolICMP = 1
)

// IP Header masks
const (
	ipv4HdrLenMask = 0x0F
	ipv4ProtoMask  = 0xF0
)

// TCP Header field position constants
const (
	// tcpSourcePortPos is the location of source port
	tcpSourcePortPos = 0

	// tcpDestPortPos is the location of destination port
	tcpDestPortPos = 2

	// tcpSeqPos is the location of seq
	tcpSeqPos = 4

	// tcpAckPos is the location of seq
	tcpAckPos = 8

	// tcpDataOffsetPos is the location of the TCP data offset
	tcpDataOffsetPos = 12

	//tcpFlagsOfsetPos is the location of the TCP flags
	tcpFlagsOffsetPos = 13

	// TCPChecksumPos is the location of TCP checksum
	tcpChecksumPos = 16
)

// TCP Header masks
const (
	// tcpDataOffsetMask is a mask for TCP data offset field
	tcpDataOffsetMask = 0xF0

	// TCPSynMask is a mask for the TCP Syn flags
	TCPSynMask = 0x2

	// TCPSynAckMask  mask idenitifies a TCP SYN-ACK packet
	TCPSynAckMask = 0x12

	// TCPRstMask mask that identifies RST packets
	TCPRstMask = 0x4

	// TCPAckMask mask that identifies ACK packets
	TCPAckMask = 0x10

	// TCPFinMask mask that identifies FIN packets
	TCPFinMask = 0x1

	// TCPPshMask = 0x8 mask that identifies PSH packets
	TCPPshMask = 0x8
)

// TCP Options Related constants
const (
	// TCPAuthenticationOption is the option number will be using
	TCPAuthenticationOption = uint8(34)

	// TCPMssOption is the type for MSS option
	TCPMssOption = uint8(2)

	// TCPMssOptionLen is the type for MSS option
	TCPMssOptionLen = uint8(4)
)

// UDP related constants.
const (
	// udpSourcePortPos is the location of source port
	udpSourcePortPos = 0
	// udpDestPortPos is the location of destination port
	udpDestPortPos = 2
	// UDPLengthPos is the location of UDP length
	udpLengthPos = 4
	// UDPChecksumPos is the location of UDP checksum
	udpChecksumPos = 6
	// UDPDataPos is the location of UDP data
	UDPDataPos = 8
	// UDPSynMask is a mask for the UDP Syn flags
	UDPSynMask = 0x10
	// UDPSynAckMask  mask idenitifies a UDP SYN-ACK packet
	UDPSynAckMask = 0x20
	// UDPAckMask mask that identifies ACK packets.
	UDPAckMask = 0x30
	// UDPFinAckMask mask that identifies the FinAck packets
	UDPFinAckMask = 0x40
	// UDPPolicyRejectMask mask that identifies a policy reject info from the remote end
	UDPPolicyRejectMask = 0x50
	// UDPDataPacket is a simple data packet
	UDPDataPacket = 0x80
	// UDPPacketMask identifies type of UDP packet.
	UDPPacketMask = 0xF0
)

const (
	// UDPAuthMarker is 18 byte Aporeto signature for UDP
	UDPAuthMarker = "n30njxq7bmiwr6dtxq"
	// UDPAuthMarkerLen is the length of UDP marker.
	UDPAuthMarkerLen = 18
	// UDPSignatureLen is the length of signature on UDP control packet.
	UDPSignatureLen = 20
	// UDPAuthMarkerOffset is the beginning of UDPAuthMarker
	udpAuthMarkerOffset = 10
	// UDPSignatureEnd is the end of UDPSignature.
	udpSignatureEnd = UDPDataPos + UDPSignatureLen
)

const (
	// UDPAporetoOption is the option kind for Aporeto option
	UDPAporetoOption = uint8(34)
	// UDPAporetoOptionLengthFirstByte is the first if length is greater than 255
	UDPAporetoOptionLengthFirstByte = uint8(0xff)
	// UDPAporetoOptionShortLength is the length of the option header if payload length is less than UDPAporetoOptionLengthFirstByte
	UDPAporetoOptionShortLength = 2
	// UDPAporetoOptionLongLength is the length of the option header if payload length is greater than UDPAporetoOptionLengthFirstByte
	UDPAporetoOptionLongLength = 6
)