keep getting errors cannot upload sketch to nano

[LouwrensMB]

Please read the Issues section of the Contributing Rules at the "Contributing" link to the right before submitting an issue report.
Sketch uses 26504 bytes (86%) of program storage space. Maximum is 30720 bytes.
Global variables use 985 bytes (48%) of dynamic memory, leaving 1063 bytes for local variables. Maximum is 2048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x60
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x60
Failed uploading: uploading error: exit status 1

[per1234]

Hi @LouwrensMB. Thanks for your interest in this open source project. This issue tracker is only to be used to report bugs or feature requests specific to the project. This topic is more appropriate for the Arduino Forum. I'm sure we will be able to help you out over there:

https://forum.arduino.cc/