v5.8.0b - Add Domoticz Voltage and Current

5.8.0b
 * Fix command FullTopic entry when using serial or console
interface
 * Fix possible UDP syslog blocking
 * Add debug information
to MQTT subscribe
 * Add Domoticz sensors for Voltage and Current (#903)

README.md

@@ -1,7 +1,7 @@
 ## Sonoff-Tasmota
 Provide ESP8266 based Sonoff by [iTead Studio](https://www.itead.cc/) and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE.
 
-Current version is **5.8.0a** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information.
+Current version is **5.8.0b** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information.
 
 ### ATTENTION All versions
 

sonoff/_releasenotes.ino

@@ -1,8 +1,14 @@
-/* 5.8.0a
+/* 5.8.0b
+ * Fix command FullTopic entry when using serial or console interface
+ * Fix possible UDP syslog blocking
+ * Add debug information to MQTT subscribe
+ * Add Domoticz sensors for Voltage and Current (#903)
+ *
+ * 5.8.0a
  * Add translations to I2Cscan
  * Add translation to BH1750 unit lx
  * Set default WS2812 pixel count to WS2812_LEDS
- * Fix GPIOx JSON response (#897)
+ * Fix command GPIOx JSON response (#897)
  *
  * 5.8.0 20170918
  * Remove the need for NeoPixelBus library for Hue support

sonoff/language/en-GB.h

@@ -163,6 +163,7 @@
 #define D_STOP "Stop"
 #define D_SUBNET_MASK "Subnet Mask"
 #define D_SUBNETMASK "Subnetmask"
+#define D_SUBSCRIBE_TO "Subscribe to"
 #define D_SUCCESSFUL "Successful"
 #define D_SWITCH "Switch"
 #define D_SYNC "Sync"
@@ -373,6 +374,8 @@
   #define D_DOMOTICZ_POWER_ENERGY "Power,Energy"
   #define D_DOMOTICZ_ILLUMINANCE "Illuminance"
   #define D_DOMOTICZ_COUNT "Count"
+  #define D_DOMOTICZ_VOLTAGE "Voltage"
+  #define D_DOMOTICZ_CURRENT "Current"
 #define D_DOMOTICZ_UPDATE_TIMER "Update timer"
 #define D_CONFIGURE_DOMOTICZ "Configure Domoticz"
 

sonoff/language/nl-NL.h

@@ -163,6 +163,7 @@
 #define D_STOP "Stop"
 #define D_SUBNET_MASK "Subnet Masker"
 #define D_SUBNETMASK "Subnetmasker"
+#define D_SUBSCRIBE_TO "Abonneer op"
 #define D_SUCCESSFUL "Gelukt"
 #define D_SWITCH "Schakelaar"
 #define D_SYNC "Sync"
@@ -373,6 +374,8 @@
   #define D_DOMOTICZ_POWER_ENERGY "Power,Energy"
   #define D_DOMOTICZ_ILLUMINANCE "Illuminance"
   #define D_DOMOTICZ_COUNT "Count"
+  #define D_DOMOTICZ_VOLTAGE "Spanning"
+  #define D_DOMOTICZ_CURRENT "Stroom"
 #define D_DOMOTICZ_UPDATE_TIMER "Bijwerk timer"
 #define D_CONFIGURE_DOMOTICZ "Configureer Domoticz"
 

sonoff/sonoff.ino

@@ -25,16 +25,16 @@
     - Select IDE Tools - Flash Size: "1M (no SPIFFS)"
   ====================================================*/
 
-#define VERSION                0x05080001  // 5.8.0a
+#define VERSION                0x05080002  // 5.8.0b
 
-enum log_t   {LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE, LOG_LEVEL_ALL};
 enum week_t  {Last, First, Second, Third, Fourth};
 enum dow_t   {Sun=1, Mon, Tue, Wed, Thu, Fri, Sat};
 enum month_t {Jan=1, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec};
-enum wifi_t  {WIFI_RESTART, WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_RETRY, WIFI_WAIT, MAX_WIFI_OPTION};
-enum swtch_t {TOGGLE, FOLLOW, FOLLOW_INV, PUSHBUTTON, PUSHBUTTON_INV, PUSHBUTTONHOLD, PUSHBUTTONHOLD_INV, MAX_SWITCH_OPTION};
-enum led_t   {LED_OFF, LED_POWER, LED_MQTTSUB, LED_POWER_MQTTSUB, LED_MQTTPUB, LED_POWER_MQTTPUB, LED_MQTT, LED_POWER_MQTT, MAX_LED_OPTION};
-enum emul_t  {EMUL_NONE, EMUL_WEMO, EMUL_HUE, EMUL_MAX};
+enum log_t   {LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE, LOG_LEVEL_ALL};  // SerialLog, Syslog, Weblog
+enum wifi_t  {WIFI_RESTART, WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_RETRY, WIFI_WAIT, MAX_WIFI_OPTION};  // WifiConfig
+enum swtch_t {TOGGLE, FOLLOW, FOLLOW_INV, PUSHBUTTON, PUSHBUTTON_INV, PUSHBUTTONHOLD, PUSHBUTTONHOLD_INV, MAX_SWITCH_OPTION};  // SwitchMode
+enum led_t   {LED_OFF, LED_POWER, LED_MQTTSUB, LED_POWER_MQTTSUB, LED_MQTTPUB, LED_POWER_MQTTPUB, LED_MQTT, LED_POWER_MQTT, MAX_LED_OPTION};  // LedState
+enum emul_t  {EMUL_NONE, EMUL_WEMO, EMUL_HUE, EMUL_MAX};  // Emulation
 
 #include "user_config.h"
 #include "user_config_override.h"
@@ -73,7 +73,10 @@ enum emul_t  {EMUL_NONE, EMUL_WEMO, EMUL_HUE, EMUL_MAX};
 #undef USE_DS18x20                          // Disable DS18x20 sensor
 #endif
 #ifdef USE_I2C
-#undef USE_I2C                              // Disable all I2C sensors
+#undef USE_I2C                              // Disable all I2C sensors and devices
+#endif
+#ifdef USE_SPI
+#undef USE_SPI                              // Disable all SPI devices
 #endif
 #ifdef USE_WS2812
 #undef USE_WS2812                           // Disable WS2812 Led string
@@ -445,6 +448,14 @@ void setLed(uint8_t state)
 
 /********************************************************************************************/
 
+void mqtt_subscribe(char *topic)
+{
+  snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_MQTT D_SUBSCRIBE_TO " %s"), topic);
+  addLog(LOG_LEVEL_DEBUG);
+  mqttClient.subscribe(topic);
+  mqttClient.loop();  // Solve LmacRxBlk:1 messages
+}
+
 void mqtt_publish_sec(const char* topic, boolean retained)
 {
   if (sysCfg.flag.mqtt_enabled) {
@@ -550,17 +561,14 @@ void mqtt_connected()
     mqtt_publish_topic_P(0, S_RSLT_POWER);
 
     getTopic_P(stopic, 0, sysCfg.mqtt_topic, PSTR("#"));
-    mqttClient.subscribe(stopic);
-    mqttClient.loop();  // Solve LmacRxBlk:1 messages
+    mqtt_subscribe(stopic);
     if (strstr(sysCfg.mqtt_fulltopic, MQTT_TOKEN_TOPIC) != NULL) {
       getTopic_P(stopic, 0, sysCfg.mqtt_grptopic, PSTR("#"));
-      mqttClient.subscribe(stopic);
-      mqttClient.loop();  // Solve LmacRxBlk:1 messages
+      mqtt_subscribe(stopic);
       fallbacktopic = 1;
       getTopic_P(stopic, 0, MQTTClient, PSTR("#"));
       fallbacktopic = 0;
-      mqttClient.subscribe(stopic);
-      mqttClient.loop();  // Solve LmacRxBlk:1 messages
+      mqtt_subscribe(stopic);
     }
 #ifdef USE_DOMOTICZ
     domoticz_mqttSubscribe();
@@ -1450,7 +1458,7 @@ void mqttDataCb(char* topic, byte* data, unsigned int data_len)
     }
 #ifdef USE_EMULATION
     else if (!strcasecmp_P(type, PSTR(D_CMND_EMULATION))) {
-      if ((payload >= 0) && (payload <= 2)) {
+      if ((payload >= EMUL_NONE) && (payload < EMUL_MAX)) {
         sysCfg.flag.emulation = payload;
         restartflag = 2;
       }
@@ -1732,7 +1740,8 @@ void do_cmnd(char *cmnd)
   }
   snprintf_P(stopic, sizeof(stopic), PSTR("/%s"), (token == NULL) ? "" : token);
   token = strtok(NULL, "");
-  snprintf_P(svalue, sizeof(svalue), (token == NULL) ? "" : token);
+//  snprintf_P(svalue, sizeof(svalue), (token == NULL) ? "" : token);  // Fails with command FullTopic home/%prefix%/%topic% as it processes %p of %prefix%
+  strlcpy(svalue, (token == NULL) ? "" : token, sizeof(svalue));       // Fixed 5.8.0b
   mqttDataCb(stopic, (byte*)svalue, strlen(svalue));
 }
 

sonoff/support.ino

@@ -1153,6 +1153,7 @@ void syslog()
   // Destroys log_data
   char syslog_preamble[64];  // Hostname + Id
 
+  yield();  // Fix possible UDP syslog blocking
   if (portUDP.beginPacket(sysCfg.syslog_host, sysCfg.syslog_port)) {
     snprintf_P(syslog_preamble, sizeof(syslog_preamble), PSTR("%s ESP-"), Hostname);
     memmove(log_data + strlen(syslog_preamble), log_data, sizeof(log_data) - strlen(syslog_preamble));

sonoff/webserver.ino

@@ -1349,7 +1349,8 @@ void handleCmnd()
   if (valid) {
     byte curridx = logidx;
     if (strlen(webServer->arg("cmnd").c_str())) {
-      snprintf_P(svalue, sizeof(svalue), webServer->arg("cmnd").c_str());
+//      snprintf_P(svalue, sizeof(svalue), webServer->arg("cmnd").c_str());  // Processes FullTopic %p
+      strlcpy(svalue, webServer->arg("cmnd").c_str(), sizeof(svalue));       // Fixed 5.8.0b
 //      byte syslog_now = syslog_level;
 //      syslog_level = 0;  // Disable UDP syslog to not trigger hardware WDT - Seems to work fine since 5.7.1d (global logging)
       do_cmnd(svalue);
@@ -1413,7 +1414,8 @@ void handleAjax()
   byte counter = 99;
 
   if (strlen(webServer->arg("c1").c_str())) {
-    snprintf_P(svalue, sizeof(svalue), webServer->arg("c1").c_str());
+//    snprintf_P(svalue, sizeof(svalue), webServer->arg("c1").c_str());  // Processes FullTopic %p
+    strlcpy(svalue, webServer->arg("c1").c_str(), sizeof(svalue));       // Fixed 5.8.0b
     snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_COMMAND "%s"), svalue);
     addLog(LOG_LEVEL_INFO);
 //    byte syslog_now = syslog_level;

sonoff/xdrv_domoticz.ino

@@ -19,7 +19,7 @@
 
 #ifdef USE_DOMOTICZ
 
-#define DOMOTICZ_MAX_SENSORS  6
+#define DOMOTICZ_MAX_SENSORS  8
 
 #ifdef USE_WEBSERVER
 const char HTTP_FORM_DOMOTICZ[] PROGMEM =
@@ -38,7 +38,7 @@ const char HTTP_FORM_DOMOTICZ_TIMER[] PROGMEM =
 #endif  // USE_WEBSERVER
 
 const char domoticz_sensors[DOMOTICZ_MAX_SENSORS][DOMOTICZ_SENSORS_MAX_STRING_LENGTH] PROGMEM =
-  { D_DOMOTICZ_TEMP, D_DOMOTICZ_TEMP_HUM, D_DOMOTICZ_TEMP_HUM_BARO, D_DOMOTICZ_POWER_ENERGY, D_DOMOTICZ_ILLUMINANCE, D_DOMOTICZ_COUNT };
+  { D_DOMOTICZ_TEMP, D_DOMOTICZ_TEMP_HUM, D_DOMOTICZ_TEMP_HUM_BARO, D_DOMOTICZ_POWER_ENERGY, D_DOMOTICZ_ILLUMINANCE, D_DOMOTICZ_COUNT, D_DOMOTICZ_VOLTAGE, D_DOMOTICZ_CURRENT };
 
 char domoticz_in_topic[] = DOMOTICZ_IN_TOPIC;
 char domoticz_out_topic[] = DOMOTICZ_OUT_TOPIC;
@@ -100,8 +100,7 @@ void domoticz_mqttSubscribe()
   if (domoticz_subscribe) {
     char stopic[TOPSZ];
     snprintf_P(stopic, sizeof(stopic), PSTR("%s/#"), domoticz_out_topic); // domoticz topic
-    mqttClient.subscribe(stopic);
-    mqttClient.loop();  // Solve LmacRxBlk:1 messages
+    mqtt_subscribe(stopic);
   }
 }
 
@@ -259,7 +258,7 @@ uint8_t dom_hum_stat(char *hum)
   return (!h) ? 0 : (h < 40) ? 2 : (h > 70) ? 3 : 1;
 }
 
-void dom_sensor(byte idx, char *data)
+void domoticz_sensor(byte idx, char *data)
 {
   if (sysCfg.domoticz_sensor_idx[idx]) {
     char dmess[64];
@@ -272,46 +271,46 @@ void dom_sensor(byte idx, char *data)
   }
 }
 
-void domoticz_sensor1(char *temp)
-{
-  dom_sensor(0, temp);
-}
+//  domoticz_sensor(0, temp);
 
 void domoticz_sensor2(char *temp, char *hum)
 {
   char data[16];
   snprintf_P(data, sizeof(data), PSTR("%s;%s;%d"), temp, hum, dom_hum_stat(hum));
-  dom_sensor(1, data);
+  domoticz_sensor(1, data);
 }
 
 void domoticz_sensor3(char *temp, char *hum, char *baro)
 {
   char data[32];
   snprintf_P(data, sizeof(data), PSTR("%s;%s;%d;%s;5"), temp, hum, dom_hum_stat(hum), baro);
-  dom_sensor(2, data);
+  domoticz_sensor(2, data);
 }
 
 void domoticz_sensor4(uint16_t power, char *energy)
 {
   char data[16];
   snprintf_P(data, sizeof(data), PSTR("%d;%s"), power, energy);
-  dom_sensor(3, data);
+  domoticz_sensor(3, data);
 }
 
 void domoticz_sensor5(uint16_t lux)
 {
   char data[8];
   snprintf_P(data, sizeof(data), PSTR("%d"), lux);
-  dom_sensor(4, data);
+  domoticz_sensor(4, data);
 }
 
 void domoticz_sensor6(uint32_t count)
 {
   char data[16];
   snprintf_P(data, sizeof(data), PSTR("%d"), count);
-  dom_sensor(5, data);
+  domoticz_sensor(5, data);
 }
 
+//  domoticz_sensor(6, voltage);
+//  domoticz_sensor(7, current);
+
 /*********************************************************************************************\
  * Presentation
 \*********************************************************************************************/
@@ -380,11 +379,11 @@ void domoticz_saveSettings()
     sysCfg.domoticz_relay_idx[0], sysCfg.domoticz_relay_idx[1], sysCfg.domoticz_relay_idx[2], sysCfg.domoticz_relay_idx[3],
     sysCfg.domoticz_update_timer);
   addLog(LOG_LEVEL_INFO);
-  snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_DOMOTICZ D_CMND_KEYIDX " %d, %d, %d, %d, " D_CMND_SWITCHIDX " %d, %d, %d, %d, " D_CMND_SENSORIDX " %d, %d, %d, %d, %d, %d"),
+  snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_DOMOTICZ D_CMND_KEYIDX " %d, %d, %d, %d, " D_CMND_SWITCHIDX " %d, %d, %d, %d, " D_CMND_SENSORIDX " %d, %d, %d, %d, %d, %d, %d, %d"),
     sysCfg.domoticz_key_idx[0], sysCfg.domoticz_key_idx[1], sysCfg.domoticz_key_idx[2], sysCfg.domoticz_key_idx[3],
     sysCfg.domoticz_switch_idx[0], sysCfg.domoticz_switch_idx[1], sysCfg.domoticz_switch_idx[2], sysCfg.domoticz_switch_idx[3],
     sysCfg.domoticz_sensor_idx[0], sysCfg.domoticz_sensor_idx[1], sysCfg.domoticz_sensor_idx[2], sysCfg.domoticz_sensor_idx[3],
-    sysCfg.domoticz_sensor_idx[4], sysCfg.domoticz_sensor_idx[5]);
+    sysCfg.domoticz_sensor_idx[4], sysCfg.domoticz_sensor_idx[5], sysCfg.domoticz_sensor_idx[6], sysCfg.domoticz_sensor_idx[7]);
   addLog(LOG_LEVEL_INFO);
 }
 #endif  // USE_WEBSERVER

sonoff/xdrv_wemohue.ino

@@ -475,7 +475,7 @@ void hue_global_cfg(String *path)
 {
   String response;
 
-  path->remove(0,1);               // cut leading / to get <id>
+  path->remove(0,1);                                 // cut leading / to get <id>
   response = F("{\"lights\":{\"");
   for (uint8_t i = 1; i <= Maxdevice; i++) {
     response += i;
@@ -521,8 +521,8 @@ void hue_lights(String *path)
   bool change = false;
   char id[4];
 
-  path->remove(0,path->indexOf("/lights"));                // Remove until /lights
-  if (path->endsWith("/lights")) {                         // Got /lights
+  path->remove(0,path->indexOf("/lights"));          // Remove until /lights
+  if (path->endsWith("/lights")) {                   // Got /lights
     response = "{\"";
     for (uint8_t i = 1; i <= Maxdevice; i++) {
       response += i;
@@ -539,9 +539,9 @@ void hue_lights(String *path)
     response += "}";
     webServer->send(200, FPSTR(HDR_CTYPE_JSON), response);
   }
-  else if (path->endsWith("/state")) {                       // Got ID/state
-    path->remove(0,8);                                       // Remove /lights/
-    path->remove(path->indexOf("/state"));                   // Remove /state
+  else if (path->endsWith("/state")) {               // Got ID/state
+    path->remove(0,8);                               // Remove /lights/
+    path->remove(path->indexOf("/state"));           // Remove /state
     device = atoi(path->c_str());
     if ((device < 1) || (device > Maxdevice)) {
       device = 1;
@@ -614,7 +614,7 @@ void hue_lights(String *path)
         response.replace("{res}", String(tmp));
         change = true;
       }
-      if (hue_json.containsKey("ct")) {  // Color temperature 153 (Cold) to 500 (Warm)
+      if (hue_json.containsKey("ct")) {              // Color temperature 153 (Cold) to 500 (Warm)
         ct = hue_json["ct"];
         if (resp) {
           response += ",";
@@ -642,8 +642,8 @@ void hue_lights(String *path)
 
     webServer->send(200, FPSTR(HDR_CTYPE_JSON), response);
   }
-  else if(path->indexOf("/lights/") >= 0) {            // Got /lights/ID
-    path->remove(0,8);                                 // Remove /lights/
+  else if(path->indexOf("/lights/") >= 0) {          // Got /lights/ID
+    path->remove(0,8);                               // Remove /lights/
     device = atoi(path->c_str());
     if ((device < 1) || (device > Maxdevice)) {
       device = 1;
@@ -696,16 +696,16 @@ void handle_hue_api(String *path)
   path->remove(0, 4);                                // remove /api
   uint16_t apilen = path->length();
   snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_HTTP D_HUE_API " (%s)"), path->c_str());
-  addLog(LOG_LEVEL_DEBUG_MORE);
+  addLog(LOG_LEVEL_DEBUG_MORE);                      // HTP: Hue API (//lights/1/state)
   for (args = 0; args < webServer->args(); args++) {
     String json = webServer->arg(args);
     snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_HTTP D_HUE_POST_ARGS " (%s)"), json.c_str());
-    addLog(LOG_LEVEL_DEBUG_MORE);
+    addLog(LOG_LEVEL_DEBUG_MORE);                    // HTP: Hue POST args ({"on":false})
   }
 
-  if (path->endsWith("/invalid/")) {}                 // Just ignore
-  else if (!apilen) hue_auth(path);                   // New HUE App setup
-  else if (path->endsWith("/")) hue_auth(path);       // New HUE App setup
+  if (path->endsWith("/invalid/")) {}                // Just ignore
+  else if (!apilen) hue_auth(path);                  // New HUE App setup
+  else if (path->endsWith("/")) hue_auth(path);      // New HUE App setup
   else if (path->endsWith("/config")) hue_config(path);
   else if (path->indexOf("/lights") >= 0) hue_lights(path);
   else if (path->indexOf("/groups") >= 0) hue_groups(path);

sonoff/xsns_ds18b20.ino

@@ -195,7 +195,7 @@ void dsb_mqttPresent(uint8_t* djson)
     snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s, \"DS18B20\":{\"" D_TEMPERATURE "\":%s}"), mqtt_data, stemp1);
     *djson = 1;
 #ifdef USE_DOMOTICZ
-    domoticz_sensor1(stemp1);
+    domoticz_sensor(0, stemp1);
 #endif  // USE_DOMOTICZ
   }
 }

sonoff/xsns_ds18x20.ino

@@ -201,7 +201,9 @@ void ds18x20_mqttPresent(uint8_t* djson)
         mqtt_data, stemp1, i +1, dsbstype, ds18x20_address(i).c_str(), stemp2);
       strcpy(stemp1, ", ");
 #ifdef USE_DOMOTICZ
-      if (1 == dsxflg) domoticz_sensor1(stemp2);
+      if (1 == dsxflg) {
+        domoticz_sensor(0, stemp2);
+      }
 #endif  // USE_DOMOTICZ
     }
   }

sonoff/xsns_hlw8012.ino

@@ -653,7 +653,9 @@ void hlw_mqttStat(byte option)
 #ifdef USE_DOMOTICZ
   if (option) {  // Only send if telemetry
     dtostrfd(pet * 1000, 1, spet);
-    domoticz_sensor4((uint16_t)pw, spet);
+    domoticz_sensor4((uint16_t)pw, spet);  // PowerUsage, EnergyToday
+    domoticz_sensor(6, spu);  // Voltage
+    domoticz_sensor(7, spi);  // Current
   }
 #endif  // USE_DOMOTICZ
 }