Ikea TradFri MotionSensor / Sonoff ZBBridge MQTT-Signal

[GreatSUN]

PROBLEM DESCRIPTION

A clear and concise description of what the problem is.
Currently we only get MQTT KeyNames like "0006!42" when using Sonoff ZBBridge with Ikea Motion Sensor 704.299.13

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Device used (e.g., Sonoff Basic): Sonoff ZBBridge
• Tasmota binary firmware version number used: 11.0.0
  • Pre-compiled
  • Self-compiled
• Flashing tools used: _____
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:
12:00:49.365 MQT: stat/tasmota_9D1778/RESULT = {"NAME":"Generic","GPIO":[1,1,1,1,1,1,1,1,1,1,1,1,1,1],"FLAG":0,"BASE":18}
12:00:49.573 MQT: stat/tasmota_9D1778/RESULT = {"Module":{"75":"Sonoff ZbBridge"}}
12:00:49.776 MQT: stat/tasmota_9D1778/RESULT = {"GPIO0":{"320":"Led_i1"},"GPIO1":{"3552":"Zigbee Tx"},"GPIO2":{"0":"None"},"GPIO3":{"3584":"Zigbee Rx"},"GPIO4":{"5312":"Zigbee Rst1"},"GPIO5":{"0":"None"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO12":{"640":"I2C SDA"},"GPIO13":{"576":"LedLink_i"},"GPIO14":{"608":"I2C SCL"},"GPIO15":{"0":"None"},"GPIO16":{"32":"Button1"},"GPIO17":{"0":"None"}}
12:00:53.847 MQT: tele/tasmota_9D1778/SENSOR = {"ZbReceived":{"0x8C92":{"Device":"0x8C92","Illuminance":21819,"Endpoint":1,"LinkQuality":55}}}

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

• Provide the output of this command: Status 0:

  STATUS 0 output here:
12:03:09.163 MQT: stat/tasmota_9D1778/STATUS = {"Status":{"Module":75,"DeviceName":"Tasmota","FriendlyName":["Tasmota"],"Topic":"tasmota_9D1778","ButtonTopic":"0","Power":0,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0}}
12:03:09.168 MQT: stat/tasmota_9D1778/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota/release/tasmota.bin.gz","RestartReason":"Power On","Uptime":"8T23:22:51","StartupUTC":"2022-04-20T11:40:18","Sleep":100,"CfgHolder":4617,"BootCount":14,"BCResetTime":"2022-04-11T23:10:32","SaveCount":36,"SaveAddress":"FA000"}}
12:03:09.173 MQT: stat/tasmota_9D1778/STATUS2 = {"StatusFWR":{"Version":"11.0.0(zbbridge)","BuildDateTime":"2022-02-12T14:13:46","Boot":31,"Core":"2_7_4_9","SDK":"2.2.2-dev(38a443e)","CpuFrequency":160,"Hardware":"ESP8266EX","CR":"366/699"}}
12:03:09.178 MQT: stat/tasmota_9D1778/STATUS3 = {"StatusLOG":{"SerialLog":0,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["SVGCast2",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A00190000000000","00000080","00006000","00004000"]}}
12:03:09.186 MQT: stat/tasmota_9D1778/STATUS4 = {"StatusMEM":{"ProgramSize":673,"Free":1116,"Heap":24,"ProgramFlashSize":2048,"FlashSize":2048,"FlashChipId":"1540A1","FlashFrequency":40,"FlashMode":3,"Features":["00000809","0F1007C6","04400001","00000003","00000000","00000000","00020080","00200000","00000000"],"Drivers":"1,2,4,7,9,10,12,20,23,38,41,50","Sensors":"1"}}
12:03:09.192 MQT: stat/tasmota_9D1778/STATUS5 = {"StatusNET":{"Hostname":"tasmota-9D1778-6008","IPAddress":"192.168.51.5","Gateway":"192.168.48.1","Subnetmask":"255.255.248.0","DNSServer1":"192.168.48.1","DNSServer2":"1.1.1.1","Mac":"E8:DB:84:9D:17:78","Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":17.0}}
12:03:09.196 MQT: stat/tasmota_9D1778/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.48.1","MqttPort":8083,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_9D1778","MqttUser":"DVES_USER","MqttCount":87,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":10}}
12:03:09.203 MQT: stat/tasmota_9D1778/STATUS7 = {"StatusTIM":{"UTC":"2022-04-29T11:03:09","Local":"2022-04-29T12:03:09","StartDST":"2022-03-27T02:00:00","EndDST":"2022-10-30T03:00:00","Timezone":"+01:00","Sunrise":"05:33","Sunset":"20:01"}}
12:03:09.208 MQT: stat/tasmota_9D1778/STATUS10 = {"StatusSNS":{"Time":"2022-04-29T12:03:09"}}
12:03:09.215 MQT: stat/tasmota_9D1778/STATUS11 = {"StatusSTS":{"Time":"2022-04-29T12:03:09","Uptime":"8T23:22:51","UptimeSec":775371,"Vcc":3.473,"Heap":24,"SleepMode":"Dynamic","Sleep":100,"LoadAvg":9,"MqttCount":87,"Wifi":{"AP":1,"SSId":"SVGCast2","BSSId":"F0:2F:74:80:24:71","Channel":10,"Mode":"11n","RSSI":100,"Signal":-39,"LinkCount":5,"Downtime":"0T00:00:33"}}}

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:
Not able to filter stuff properly :-(

TO REPRODUCE

Steps to reproduce the behavior:
Connect MotionSensor to Sonoff ZBBridge and issue a motion.

MQTT with key -> value 0006!42 -> 0008070000 is sent.
Could be "MotionDetected" -> Timestamp (because we don't have any kind of switch, this would be the easiest way to subscribe to it and detect new motions as the value changes).

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.
Request to change 0006!42 with value 0008070000 to MotionDetected with Timestamp as value.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

[a-bali]

I have the same issue here: #20156, did you manage to solve it?

[sfromis]

If you know what those attributes are, since #16252 (august 2022) you can create a definition file to assign meaningful names.
https://tasmota.github.io/docs/Zigbee/#definition-file

[a-bali]

I am trying to create such mapping, but I'm not sure what is the attribute. This is what I see in the logs:

16:20:30.685 ZIG: {"ZbZNPReceived":"4481000006008D51010100E100A2504100000801054200080700008D510B"}
16:20:30.688 ZIG: {"ZbZCLReceived":{"groupid":0,"clusterid":"0x0006","srcaddr":"0x518D","srcendpoint":1,"dstendpoint":1,"wasbroadcast":0,"LinkQuality":225,"securityuse":0,"seqnumber":0,"fc":"0x01","frametype":1,"direction":0,"disableresp":0,"manuf":"0x0000","transact":5,"cmdid":"0x42","payload":"0008070000"}}
16:20:30.694 ZigbeeZCLSend device: 0x518D, endpoint:1, cluster:0x0006, cmd:0x0B, send:"4200"
16:20:30.696 ZIG: ZbZNPSent 2402028D5100000000000001000001060005001E050010050B4200
16:20:30.699 ZIG: ZbZCLRawReceived: {"0x518D":{"0006!42":"0008070000","Power":1,"PowerOnlyWhenOn":0,"PowerOnTime":180,"PowerOffWait":0,"Endpoint":1,"LinkQuality":225}}
16:20:30.706 MQT: tele/tasmota_680D40/SENSOR = {"ZbReceived":{"0x518D":{"Device":"0x518D","0006!42":"0008070000","Power":1,"PowerOnlyWhenOn":0,"PowerOnTime":180,"PowerOffWait":0,"Endpoint":1,"LinkQuality":225}}}
16:20:30.734 ZIG: {"ZbZNPReceived":"640200"}
16:20:31.735 ZIG: {"ZbZNPReceived":"4480000105"}

I tried the following definition file:

#Z2Tv1
:TRADFRI motion*,
0006/0042=0406/0000

But without success. I guess the source cluster is 0x0006 but I am really not sure what the source attribute should be (0042,4200 did not work). Target attribute I suppose is 0406/0000 (Occupation). Any hints?