Matter 1.3 - support for energy monitoring

[ss89]

PROBLEM DESCRIPTION

I want my tasmota devices to report energy consumption measured by an e.g. bl0937 sensor

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Device used (e.g., Sonoff Basic): Nous A8T
• Tasmota binary firmware version number used: 14.0.0
  • Pre-compiled
  • Self-compiled
• Flashing tools used: came preflashed with 13.x, updated via tasmota devices web ui
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:
20:15:33.342 CMD: Backlog Template; Module; GPIO 255
20:15:33.394 RSL: RESULT = {"NAME":"NOUS A8T","GPIO":[1,1,320,1,32,1,1,1,1,224,2624,1,1,1,1,1,0,1,1,1,0,1,2656,2720,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1}
20:15:33.623 RSL: RESULT = {"Module":{"0":"NOUS A8T"}}
20:15:33.835 RSL: RESULT = {"GPIO0":{"0":"None"},"GPIO1":{"0":"None"},"GPIO2":{"320":"Led_i1"},"GPIO3":{"0":"None"},"GPIO4":{"32":"Button1"},"GPIO5":{"0":"None"},"GPIO6":{"0":"None"},"GPIO7":{"0":"None"},"GPIO8":{"0":"None"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO11":{"0":"None"},"GPIO12":{"0":"None"},"GPIO13":{"224":"Relay1"},"GPIO14":{"2624":"HLWBL SEL_i"},"GPIO15":{"0":"None"},"GPIO16":{"0":"None"},"GPIO17":{"0":"None"},"GPIO18":{"0":"None"},"GPIO19":{"0":"None"},"GPIO20":{"0":"None"},"GPIO21":{"0":"None"},"GPIO22":{"0":"None"},"GPIO23":{"0":"None"},"GPIO24":{"0":"None"},"GPIO25":{"0":"None"},"GPIO26":{"2656":"HLWBL CF1"},"GPIO27":{"2720":"BL0937 CF"},"GPIO32":{"0":"None"},"GPIO33":{"0":"None"},"GPIO34":{"0":"None"},"GPIO35":{"0":"None"},"GPIO36":{"0":"None"},"GPIO37":{"0":"None"},"GPIO38":{"0":"None"},"GPIO39":{"0":"None"}}

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

• Provide the output of this command: Status 0:

  STATUS 0 output here:

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:

TO REPRODUCE

commission tasmota device with home assistant, see there is a relay and cpu temperature - that's it. No energy monitoring.

EXPECTED BEHAVIOUR

Allow to add energy monitoring in tasmotas matter menu (maybe include in the docs how to refer the sensor properly too?)

SCREENSHOTS

not needed

ADDITIONAL CONTEXT

(Please, remember to close the issue when the problem has been addressed)

[s-hadinger]

This is on the roadmap