New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
4Ch Relay Module, cannot found programming header #1369
Comments
I already got it working. I've to use the onchip TX/RX but it is working now. |
hi, can you share where you connected tx,rx,3,3v + gnd? http://smart-house.adrian.czabanowski.com/wp-content/uploads/2018/02/file.jpeg is tasmota working on it? I'm also wondering if relays are controlled directly by GPIOs from this PSF, it does not look like that? |
Yes, tasmota is working on it, I used the pins you just shared. |
thx @nicomda |
That board has a unknown chip (no markings) near the PSF, which intercepts connections to the relays. Do you have full control over the relays state? |
you have a full control once you switch off additional function those chips brings like inching or selflocking. Once you switch on inching/selflocking those chips impose additional features on a relay. You can see it from this moment at this video apology video is in polish |
Tks. I have a variant of this board with 4 buttons and 220v PSU. |
i have 5V version, espurna for sonoff4CHPRO working perfect! |
I've bought a bunch of 4ch tension free relay modules. Gonna attach a picture of my board. I tried to directly connect UART pins to the PSF-B04, without success in the flashing process. Drivers are ok, cause I've already flashed like 5 more sonoff switches. Do you know where is the header and its pinout?
The text was updated successfully, but these errors were encountered: