Device Name not shown in Tasmota 12.1.0.1 (Dev)

[Mark-Muc]

It seems that this version don't show the Device Name, provided by the template don't show in the WebUI
i.e.
{"NAME":"Shelly 2.5 (Taster)","GPIO":[320,0,0,0,224,129,0,0,640,128,608,225,3456,4736],"FLAG":0,"BASE":18}

Shelly 2.5 (Taster) won't show in the UI

bevor:

after:

Version:

Tasmota Version	12.1.0.1(TasmoCompiler-esp8266generic)
2022.08.22 07:31:51
2_7_4_9/2.2.2-dev(38a443e)
0T00:02:09
21 at 0xFB000
10
Software/System restart
Rollo Vorraum Ostauf
Rollo Vorraum Ost zu

[arendst]

No bug. It's a feature. Read the release notes and find new command SetOption141

[arendst]

GOT IT. The test for initial_config fails when only one SSID is configured.

As a workaround if you have one SSID not configured, configure it the same as the other. This should fix the initial_config flag.

I'll see how to fix this.

[arendst]

Fixed in latest dev v12.1.0.1 - 20220824

[barbudor]

I was running a 12.1.0.1 of yesterday evening but you found out in the mean time 😄

and the workaround works fine too

[Mark-Muc]

the workaround works for me too .. later i'll try the "newer" built
Thx for finding the problem
Mark

[Mark-Muc]

Ver. 12.1.1.1 DOES the trick .. works correct again!!
Mark