Full support for Shelly plus 1/1PM add-on #20580

Kolia56 · 2024-01-24T14:25:00Z

Kolia56
Jan 24, 2024

PROBLEM DESCRIPTION

It seems that DS18x20 are not yet recognized by this new flavour of Shelly plus 1 with addon. Many different information sources have been crawled with no success so far including this discussion or hardware discord channel.
Are there any chance to get this device supported? Or is there any specific settings that we should be aware of?
Thank you

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

15:10:53.311 MQT: stat/tasmota_0B0778/RESULT = {"NAME":"Shelly Plus 1","GPIO":[1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1312,1,1,1,1,1,32,224,1,1,1,1,1,1,1,1,1,1,1,1,1],"FLAG":0,"BASE":1}
15:10:53.542 MQT: stat/tasmota_0B0778/RESULT = {"Module":{"0":"Shelly Plus 1"}}
15:10:53.798 MQT: stat/tasmota_0B0778/RESULT = {"GPIO0":{"0":"None"},"GPIO1":{"0":"None"},"GPIO2":{"0":"None"},"GPIO3":{"0":"None"},"GPIO4":{"0":"None"},"GPIO5":{"0":"None"},"GPIO6":{"0":"None"},"GPIO7":{"0":"None"},"GPIO8":{"0":"None"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO11":{"0":"None"},"GPIO12":{"0":"None"},"GPIO13":{"0":"None"},"GPIO14":{"0":"None"},"GPIO15":{"0":"None"},"GPIO16":{"0":"None"},"GPIO17":{"0":"None"},"GPIO18":{"0":"None"},"GPIO19":{"1312":"DS18x201"},"GPIO20":{"0":"None"},"GPIO21":{"0":"None"},"GPIO22":{"0":"None"},"GPIO23":{"0":"None"},"GPIO24":{"0":"None"},"GPIO25":{"32":"Button1"},"GPIO26":{"224":"Relay1"},"GPIO27":{"0":"None"},"GPIO32":{"0":"None"},"GPIO33":{"0":"None"},"GPIO34":{"0":"None"},"GPIO35":{"0":"None"},"GPIO36":{"0":"None"},"GPIO37":{"0":"None"},"GPIO38":{"0":"None"},"GPIO39":{"0":"None"}}

If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3: none so far
Provide the output of this command: Status 0:

  STATUS 0 output here:
14:55:59.152 MQT: stat/tasmota_0B0778/STATUS = {"Status":{"Module":0,"DeviceName":"Tasmota","FriendlyName":["Tasmota"],"Topic":"tasmota_0B0778","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0}}
14:55:59.193 MQT: stat/tasmota_0B0778/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota32/release/tasmota32.bin","RestartReason":"Software reset CPU","Uptime":"0T00:04:12","StartupUTC":"2024-01-24T13:51:47","Sleep":50,"CfgHolder":4617,"BootCount":5,"BCResetTime":"2024-01-24T14:34:31","SaveCount":15}}
14:55:59.236 MQT: stat/tasmota_0B0778/STATUS2 = {"StatusFWR":{"Version":"13.3.0(thermostat_2024.01.01.a)","BuildDateTime":"2024-01-24T14:12:20","Core":"2_0_14","SDK":"4.4.6.231122","CpuFrequency":160,"Hardware":"ESP32-U4WDH-D v3.1","CR":"420/699"}}
14:55:59.266 MQT: stat/tasmota_0B0778/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["saintpierre",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C80001000600003C5A0A192800000000","00000080","00006000","00004000","00000000"]}}
14:55:59.310 MQT: stat/tasmota_0B0778/STATUS4 = {"StatusMEM":{"ProgramSize":1868,"Free":1011,"Heap":151,"StackLowMark":4,"PsrMax":0,"PsrFree":0,"ProgramFlashSize":4096,"FlashSize":4096,"FlashChipId":"164020","FlashFrequency":40,"FlashMode":"DIO","Features":["0809","9F8A97DF","0015A001","B7F7BFCF","05DA9BC4","E0360CC7","480844D2","20200000","D4BC482D","810A80B1","00000000"],"Drivers":"1,2,3,4,5,8,9,10,11,12,14,16,17,20,21,24,29,34,35,38,39,50,52,59,60,62,63,66,67,68,82,86,87,88","Sensors":"1,2,3,5,6,7,8,9,10,11,12,13,14,15,17,18,19,20,21,22,26,31,34,37,39,40,42,43,45,51,52,55,56,58,59,64,66,67,74,85,92,95,98,103,105,109,127","I2CDriver":"7,8,9,10,11,12,13,14,15,17,18,20,24,29,31,36,41,42,44,46,48,58,62,65,69,76,77,82"}}
14:55:59.391 MQT: stat/tasmota_0B0778/STATUS5 = {"StatusNET":{"Hostname":"tasmota-0B0778-1912","IPAddress":"192.168.21.175","Gateway":"192.168.21.1","Subnetmask":"255.255.255.0","DNSServer1":"192.168.21.1","DNSServer2":"0.0.0.0","Mac":"C8:2E:18:0B:07:78","IP6Global":"","IP6Local":"fe80::ca2e:18ff:fe0b:778%st1","Ethernet":{"Hostname":"","IPAddress":"0.0.0.0","Gateway":"0.0.0.0","Subnetmask":"0.0.0.0","DNSServer1":"192.168.21.1","DNSServer2":"0.0.0.0","Mac":"00:00:00:00:00:00","IP6Global":"","IP6Local":""},"Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":16.0}}
14:55:59.443 MQT: stat/tasmota_0B0778/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.21.110","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_0B0778","MqttUser":"YourMqttUser","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
14:55:59.474 MQT: stat/tasmota_0B0778/STATUS7 = {"StatusTIM":{"UTC":"2024-01-24T13:55:59","Local":"2024-01-24T14:55:59","StartDST":"2024-03-31T02:00:00","EndDST":"2024-10-28T03:00:00","Timezone":"+01:00","Sunrise":"08:26","Sunset":"17:40"}}
14:55:59.499 MQT: stat/tasmota_0B0778/STATUS10 = {"StatusSNS":{"Time":"2024-01-24T14:55:59","Thermostat1":{"ThermostatModeSet":0,"TempTargetSet":18.00,"CtrDutyCycleRead":0,"ControlMethod":0,"HybridControllerPhase":1,"EmergencyState":0}}}
14:55:59.523 MQT: stat/tasmota_0B0778/STATUS11 = {"StatusSTS":{"Time":"2024-01-24T14:55:59","Uptime":"0T00:04:12","UptimeSec":252,"Heap":153,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":1,"Berry":{"HeapUsed":4,"Objects":45},"POWER":"ON","Wifi":{"AP":1,"SSId":"saintpierre","BSSId":"76:A7:41:8D:59:17","Channel":1,"Mode":"11n","RSSI":78,"Signal":-61,"LinkCount":1,"Downtime":"0T00:00:03"}}}

Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:

TO REPRODUCE

Steps to reproduce the behavior:

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

arendst · 2024-01-24T14:39:45Z

arendst
Jan 24, 2024
Maintainer

As far as I know we only support the first gen shelly add-on.

I'll order a shelly plus add-on and see if it can work with Tasmota ...

0 replies

Kolia56 · 2024-01-24T14:42:26Z

Kolia56
Jan 24, 2024
Author

Thanks for your quick feedback. If you wish I may sponsor the project in order fund this expense.

0 replies

Kolia56 · 2024-01-24T14:45:47Z

Kolia56
Jan 24, 2024
Author

FWIW I've a DS18x20 hooked up to the original Shelly fw. It reports temperature as expected

0 replies

Jason2866 · 2024-01-24T14:50:06Z

Jason2866
Jan 24, 2024
Collaborator

@Kolia56 Tasmota has a donate button ;-) Look at the main page of the repo in readme.

0 replies

Kolia56 · 2024-01-24T14:57:37Z

Kolia56
Jan 24, 2024
Author

@Kolia56 Tasmota has a donate button ;-) Look at the main page of the repo in readme.

I've been searching it for a while. Thanks. Button not big enough ;). Done

1 reply

arendst Jan 24, 2024
Maintainer

Thx. Got it.

arendst · 2024-01-25T15:15:54Z

arendst
Jan 25, 2024
Maintainer

Progress!!

00:00:00.003 HDW: ESP32-U4WDH-S v3.0 
00:00:00.010 UFS: FlashFS mounted with 304 kB free
00:00:00.016 CFG: Loaded from File, Count 139
00:00:00.022 QPC: Count 1
00:00:00.028 ROT: Mode 1
00:00:00.058 CFG: No '*.autoconf' file found
00:00:00.062 BRY: Berry initialized, RAM used 3711 bytes
00:00:00.069 BRY: No 'preinit.be'
00:00:00.077 CFG: Energy loaded from file
00:00:00.077 NRG: Init driver 1
00:00:00.078 SRC: Restart
00:00:00.083 Project tasmota - ShellyPlus1PM Version 13.3.0.4(theo)-2_0_14(2024-01-25T16:12:07)
00:00:00.083 ETH: No ETH MDC and/or ETH MDIO GPIO defined
00:00:00.100 DSB: Sensors found Test 1
00:00:00.114 BRY: No 'autoexec.be'
00:00:00.253 WIF: Attempting connection...
00:00:01.004 WIF: Connecting to AP1 indebuurt_IoT Channel 11 BSSId 18:E8:29:CA:17:C1 in mode 11n as shellyplus1pm...
00:00:01.070 WIF: IPv4 192.168.2.182, mask 255.255.255.0, gateway 192.168.2.254
00:00:02.980 WIF: Connected
00:00:03.432 WIF: IPv6 Local fe80::aa03:2aff:feb7:7218%st1
00:00:04.006 NTP: No reply from 127.0.1.1
00:00:04.040 HTP: Web server active on shellyplus1pm with IP address 192.168.2.182
00:00:04.076 RTC: UTC 2024-01-25T15:13:31Z, DST 2024-03-31T02:00:00, STD 2024-10-27T03:00:00
16:13:31.001 RTC: Synced by NTP
16:13:32.069 MQT: Attempting connection...
16:13:32.097 MQT: Connected
16:13:32.103 MQT: tele/shellyplus1pm/LWT = Online (retained)
16:13:32.105 MQT: cmnd/shellyplus1pm/POWER = 
16:13:32.106 MQT: Subscribe to cmnd/shellyplus1pm/#
16:13:32.107 MQT: Subscribe to cmnd/tasmotas/#
16:13:32.108 MQT: Subscribe to cmnd/DVES_B77218_fb/#
16:13:32.111 MQT: tele/shellyplus1pm/INFO1 = {"Info1":{"Module":"Shelly Plus 1PM Add-On","Version":"13.3.0.4(theo)single-core","FallbackTopic":"cmnd/DVES_B77218_fb/","GroupTopic":"cmnd/tasmotas/"}}
16:13:32.116 MQT: tele/shellyplus1pm/INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"shellyplus1pm","IPAddress":"192.168.2.182","IP6Global":"","IP6Local":"fe80::aa03:2aff:feb7:7218%st1"}}
16:13:32.119 MQT: tele/shellyplus1pm/INFO3 = {"Info3":{"RestartReason":"Software reset CPU","BootCount":49}}
16:13:32.122 MQT: stat/shellyplus1pm/RESULT = {"POWER":"ON"}
16:13:32.123 MQT: stat/shellyplus1pm/POWER = ON
16:13:32.126 TFS: File 'autoexec.bat' not found
16:13:34.008 QPC: Reset
16:13:34.432 WIF: IPv6 Global fd84:7996:2cbf:1349:aa03:2aff:feb7:7218
16:13:36.014 APP: Boot Count 49
16:13:36.741 CFG: Saved, Count 140, Bytes 4096
16:13:37.009 MQT: tele/shellyplus1pm/STATE = {"Time":"2024-01-25T16:13:36","Uptime":"0T00:00:10","UptimeSec":10,"Heap":180,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":32,"MqttCount":1,"Berry":{"HeapUsed":3,"Objects":34},"POWER":"ON","Wifi":{"AP":1,"SSId":"indebuurt_IoT","BSSId":"18:E8:29:CA:17:C1","Channel":11,"Mode":"11n","RSSI":100,"Signal":-36,"LinkCount":1,"Downtime":"0T00:00:03"}}
16:13:37.030 MQT: tele/shellyplus1pm/SENSOR = {"Time":"2024-01-25T16:13:37","Switch1":"OFF","ENERGY":{"TotalStartTime":"2022-10-04T12:24:14","Total":0.000,"Yesterday":0.000,"Today":0.000,"Period":0.00,"Power":0.00,"ApparentPower":0.00,"ReactivePower":0.00,"Factor":0.00,"Voltage":226.4,"Current":0.000},"DS18B20":{"Id":"0516707FA6FF","Temperature":22.2},"TempUnit":"C"}

0 replies

Kolia56 · 2024-01-25T15:50:57Z

Kolia56
Jan 25, 2024
Author

What an achievement in a so short time. Kudos. Shall I try it or still wait? If yes what should I download? Thank you.

0 replies

wjohn007 · 2024-01-25T15:55:10Z

wjohn007
Jan 25, 2024

Great news on this topic.

0 replies

arendst · 2024-01-26T11:30:56Z

arendst
Jan 26, 2024
Maintainer

Use latest dev branch with support for DS18x20 on Shelly Plus Add-On.

Using this template {"NAME":"Shelly Plus 1PM Add-On","GPIO":[1,1,0,1,192,2720,0,0,0,0,0,0,0,0,2656,1,0,0,0,2624,0,0,224,0,0,0,0,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":1} one can configure for DS18x20 using Configure Module:

Results in

8 replies

HB787 Jan 28, 2024

It worked for a couple of hours but seems to lose the connection somehow.
I have a DHT11 device connected and tried these settings.

Noschvie Jan 28, 2024

My "Shelly Plus 1 Add-On" and a DS18x20 connected is running for over 20 hours...

Kolia56 Jan 28, 2024
Author

Same with me, has been working steadily for at least 2 days

arendst Jan 28, 2024
Maintainer

The issue is not so much the Add-On but the crappy timing sensitive DHT11.

To ease the pain dive into the DhtDelay command and find an optimum for your device.

pgorod Jan 28, 2024

This probably doesn't apply anymore with this new firmware, but with the old, incompatible Tasmota, I used to get overheating when I connected the add-on, then eventually a burnt device. It could take days to burn.

I'm just saying this now, because if anyone has unstable behaviours, it would be a good idea to check temperatures. Simply touch it, or read the internal temperature sensors (which are not the same as the DS1820 you might be trying to connect)

Kolia56 · 2024-01-26T12:41:06Z

Kolia56
Jan 26, 2024
Author

Thank you. DS18x20_o is not listed in the menu. I compiled from the current development branch with env set to tasmota32. My unit is a dual core. Could it make a difference?

Detecting chip type... Unsupported detection protocol, switching and trying again...
Connecting...
Detecting chip type... ESP32
Chip is ESP32-U4WDH (revision v3.1)
Features: WiFi, BT, Dual Core, 240MHz, Embedded Flash, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
MAC: c8:2e:18:0b:07:78
Stub is already running. No upload is necessary.
Manufacturer: 20
Device: 4016
Detected flash size: 4MB
Hard resetting via RTS pin...

1 reply

arendst Jan 26, 2024
Maintainer

DS18x20_o is not listed in the menu

In that case you're not using the latest changes. Pls recheck 4bc7b4e

Kolia56 · 2024-01-26T13:53:00Z

Kolia56
Jan 26, 2024
Author

DS18x20_o is not listed in the menu

In that case you're not using the latest changes. Pls recheck 4bc7b4e

You are right. I have now two working DS18x20 sensors. Thank you again. I will start to set-up thermostat module, this is the whole idea behind having temp sensors hooked-up to this module. As soon the new Tasmota release is on air, I will update Github template site. May I suggest to do the same with the TEMPLATES.md file?

1 reply

arendst Jan 26, 2024
Maintainer

May I suggest to do the same with the TEMPLATES.md file?

This file is automatically build (by me) from the template site just before a new release.

Kolia56 · 2024-01-26T14:28:32Z

Kolia56
Jan 26, 2024
Author

Shall I do it for the template site now then?

1 reply

Jason2866 Jan 26, 2024
Collaborator

I know no reason why not. Just mention that currently the development version needs to be used.

Kolia56 · 2024-01-26T15:22:54Z

Kolia56
Jan 26, 2024
Author

As a side comment, I confirm that Thermostat current temperature sensor is updated by the local sensor. Just make sure to use the local temperature sensor.

sensorinputset 1

The default name for the sensor is DS18B20 which is fine as long as there is only one sensor connected to the add-on. In case several sensors are connected, there will be named DS18B20-1, DS18B20-2, etc. In that case, the code has to be changed accordingly before compilation.

0 replies

Noschvie · 2024-01-27T11:39:29Z

Noschvie
Jan 27, 2024

Hello,
thanks for these modifications!

How have the template for the "Shelly plus 1" be changed to get the DS18B20 working?
Thanks!

2 replies

sfromis Jan 27, 2024

You can see the two pins needed here: #20580 (comment)

Noschvie Jan 27, 2024

You can see the two pins needed here: #20580 (comment)

Ok, got it up and running, thanks again.

Kolia56 · 2024-01-27T13:36:37Z

Kolia56
Jan 27, 2024
Author

@arendst Thanks again for your dedication to this incredible software and its related documentation.

0 replies

kroon040 · 2024-01-27T13:36:44Z

kroon040
Jan 27, 2024

Can is ask in this discussion if gpio1 and gpio19 can be used for the fingerprint sensor (r503/as608) for rx and tx?

Also the motion sensor HC-SR501, can this als be used on the addon?

2 replies

Jason2866 Jan 27, 2024
Collaborator

Yes, asking is possible. Just do not hijack a discussion where "other" stuff is discussed. So please open a new one.

kroon040 Jan 27, 2024

Ok I open a new discussion

This comment was marked as off-topic.

Sign in to view

This comment was marked as off-topic.

Sign in to view

This comment was marked as off-topic.

Sign in to view

Full support for Shelly plus 1/1PM add-on #20580

PROBLEM DESCRIPTION

REQUESTED INFORMATION

TO REPRODUCE

EXPECTED BEHAVIOUR

SCREENSHOTS

ADDITIONAL CONTEXT

Replies: 17 comments · 17 replies

arendst Jan 24, 2024 Maintainer

Kolia56 Jan 24, 2024 Author

Kolia56 Jan 24, 2024 Author

Jason2866 Jan 24, 2024 Collaborator

Kolia56 Jan 24, 2024 Author

arendst Jan 24, 2024 Maintainer

arendst Jan 25, 2024 Maintainer

Kolia56 Jan 25, 2024 Author

This comment was marked as off-topic.

This comment was marked as off-topic.

arendst Jan 26, 2024 Maintainer

Kolia56 Jan 28, 2024 Author

arendst Jan 28, 2024 Maintainer

Kolia56 Jan 26, 2024 Author

arendst Jan 26, 2024 Maintainer

Kolia56 Jan 26, 2024 Author

arendst Jan 26, 2024 Maintainer

Kolia56 Jan 26, 2024 Author

Jason2866 Jan 26, 2024 Collaborator

Kolia56 Jan 26, 2024 Author

Kolia56 Jan 27, 2024 Author

Jason2866 Jan 27, 2024 Collaborator

Replies: 17 comments 17 replies

arendst
Jan 24, 2024
Maintainer

Kolia56
Jan 24, 2024
Author

Kolia56
Jan 24, 2024
Author

Jason2866
Jan 24, 2024
Collaborator

Kolia56
Jan 24, 2024
Author

arendst Jan 24, 2024
Maintainer

arendst
Jan 25, 2024
Maintainer

Kolia56
Jan 25, 2024
Author

arendst
Jan 26, 2024
Maintainer

Kolia56 Jan 28, 2024
Author

arendst Jan 28, 2024
Maintainer

Kolia56
Jan 26, 2024
Author

arendst Jan 26, 2024
Maintainer

Kolia56
Jan 26, 2024
Author

arendst Jan 26, 2024
Maintainer

Kolia56
Jan 26, 2024
Author

Jason2866 Jan 26, 2024
Collaborator

Kolia56
Jan 26, 2024
Author

Kolia56
Jan 27, 2024
Author

Jason2866 Jan 27, 2024
Collaborator