You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Hi, I have a blue laser 5,5w PWM laser like in the picture below.
Engraves the image using the LaserGRBL program in the vectorization option. At a speed of 200 MM and a laser power of 70%. At different times, the laser stops firing as in the picture below.
In this case, it happened after 1 hour but sometimes it happens after 10 minutes. So it does not always depend on the overheating of the laser because earlier my depopulation worked 12 hours and there was no such problem. I used the LaserGrbl 2.8.45 progam entry and checked on version 2.8.40 and the problem continues.
I am asking for advice what this wine can be
Thanks in advance for your help
The text was updated successfully, but these errors were encountered:
I thought the problem lies in the software. It turned out that one of the contacts from the laser plate loosened and it came to a turn and this was the cause of the wrong laser work. I was in a hurry. Thanks for replying and closing the topic.
Hi, I have a blue laser 5,5w PWM laser like in the picture below.
Engraves the image using the LaserGRBL program in the vectorization option. At a speed of 200 MM and a laser power of 70%. At different times, the laser stops firing as in the picture below.
In this case, it happened after 1 hour but sometimes it happens after 10 minutes. So it does not always depend on the overheating of the laser because earlier my depopulation worked 12 hours and there was no such problem. I used the LaserGrbl 2.8.45 progam entry and checked on version 2.8.40 and the problem continues.
I am asking for advice what this wine can be
Thanks in advance for your help
The text was updated successfully, but these errors were encountered: