-
Notifications
You must be signed in to change notification settings - Fork 4
/
mks_config.txt
217 lines (154 loc) · 6.06 KB
/
mks_config.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
#--------------------------------------------------------------------
######### Printer type setting ##################################
#mainboard firmware setting(marlin:1; repetier:2; smoothie:3)
>cfg_firmware_type:1
#machine setting (Normal:1; Delta:2)
>cfg_machine_type:1
#baud rate (9600:1; 57600:2; 115200:3; 250000:4)
>cfg_baud_rate:3
#multi-language(enable:1, disable:0)
>cfg_multiple_language:0
#languages setting
#(simplified Chinese:1; traditional Chinese:2; English:3; Russian:4; Spanish:5). This configuration is valid when "cfg_multiple_language" is disabled.
>cfg_language_type:3
#extruder number(one:1; dual:2)
>cfg_sprayer_counter:1
#enable heated bed(yes:1; no: 0)
>cfg_custom_bed_flag:1
#the max target temp of extruder and heated bed
>cfg_max_sprayer_temperature:260
>cfg_max_hotbed_temperature:130
#pause position (-1 is invalid; Z-axis is relative position)
>cfg_XPOS:-1
>cfg_YPOS:-1
>cfg_ZADD:10
#-----------------------------------------------------------------------
######### Advanced Function Option ##################################
#enable UPS?(yes:1; no:0)
>cfg_have_ups_device:0
#enable power detecting module(mks 220det:1; mks pwc:0)
>cfg_insert_det_module:0
#enable auto off after print finish function (no:0; Yes:1）
>cfg_print_finish_close_Machine:0
#set PB0 signal when use it for sencond nozzle (high level:1; low level:0)
>cfg_PB0_trigger_Level:0
#set PB1 signal (high level:1; low level:0)
>cfg_PB1_trigger_Level:0
#set error range of Z-axis on breakpoints recovery
>cfg_breakpoint_z_error:0.2
#---------------------------------------------------------------------------
######### Filament Change Function ##############################
#the speed to extrude filament(mm/min)
>cfg_filament_load_speed:400
#the lenght to extrude filament (mm)
>cfg_filament_load_length:100
#the speed to retract filament(mm/min)
>cfg_filament_unload_speed:2000
#the lenght to retract filament(mm)
>cfg_filament_unload_length:100
#It is the minimum temperature for filament change.
It will auto heat up if the current temp doesn't reach the target.
>cfg_filament_load_limit_temperature:200
#The length of Load filament before unloader filament.
>cfg_unload_retract_length:5
#The speed of load filament before unloader filament.
>cfg_unload_retract_speed:500
#---------------------------------------------------------------------------
############ Leveling Function ########################################
#leveling mode(manual:0; auto:1; conceal leveling button:2)
>cfg_leveling_mode:0
#the command of auto leveling (G29 is available for Marlin.While G32 is for Repetier and Smoothieware)
>cfg_auto_leveling_cmd:G28;G29;
#the point number of manual leveling:(3,4,5 point available)
>cfg_point_number:5
#the coordinates of 5 point on manual leveling
>cfg_point1:45,45
>cfg_point2:175,45
>cfg_point3:175,175
>cfg_point4:45,175
>cfg_point5:110,110
#the travel speed of leveling(mm/min)
>cfg_leveling_z_speed:1500
>cfg_leveling_xy_speed:8000
#---------------------------------------------------------------------------
############# WIFI Function ##########################################
#wifi model(MKS WIFI TFT:0; MKS HLK-WIFI:1)
>cfg_wifi_type:0
#wifi mode(0:sta;1:ap)
>cfg_wifi_mode:1
#wifi name and password
>cfg_wifi_ap_name:Artillery
>cfg_wifi_key_code:12345678
#0:disable cloud service 1:enable cloud service
>cfg_cloud_enable:0
#cloud service adress
>cfg_wifi_cloud_host:www.baizhongyun.cn
#cloud service port
>cfg_cloud_port:10086
#Dynamic access IP
>cfg_ip_dhcp_flag:1
#IP/mask/gateway
>cfg_ip_address:192.168.3.100
>cfg_ip_mask:255.255.255.0
>cfg_ip_gate:192.168.3.1
#--------------------------------------------------------------------------------
############## Function Customization #######################################
#user-defined function1 and 2.(display this button . disable: 0; enable: 1)
>cfg_function_btn1_display:1
>cfg_function_btn2_display:0
#command of user-defined function
>function_btn1_cmd:M84;
>function_btn2_cmd:M500;
#set number of "More" button
>moreitem_pic_cnt:7
#edit command for 1~7 "More" button,each command must be separated by semicolon ";"
>moreitem_button1_cmd:G28;G0 X110 Y110;G0 Z0;
>moreitem_button2_cmd:M290 Z+0.025;
>moreitem_button3_cmd:M290 Z-0.025;
>moreitem_button4_cmd:G28;G29;
>moreitem_button5_cmd:M500;
>moreitem_button6_cmd:M150 R255 U255 B255;
>moreitem_button7_cmd:M150 R0 U0 B0;
#how many "More" button display on screen interface
>morefunc_cnt:4
#command setting on button1~6
>morefunc1_cmd:M150 R0 U0 B0;
>morefunc2_cmd:M150 R255 U255 B255;
>morefunc3_cmd:M290 Z+0.025;
>morefunc4_cmd:M290 Z-0.025;
>morefunc5_cmd:G28;
>morefunc6_cmd:G28;
#---------------------------------------------------------------------------------
##### Display Customization(button and logo customized see User's Manual) #######
#the color of screen background
>cfg_background_color:0x000000
#the color of title text
>cfg_title_color:0xFFFFFF
#the color of temperature,fan,(etc) background
>cfg_state_background_color:0x000000
#the color of temprature,fan,(etc) text
>cfg_state_text_color:0xFFFFFF
#the color of file button
>cfg_filename_background_color:0x000000
#the color of file text
>cfg_filename_color:0xFFFFFF
#the color of background in printing
>cfg_printingstat_word_background_color:0x000000
#the color of text in printing status
>cfg_printingstat_word_color:0xFFFFFF
#3D effects setting (disable: 0; enable: 1)
>cfg_BUTTON_3D_effects:1
#The screen is flipped 180°(0: no flip, 1: flip)
>cfg_OVERTURN_180:0
#shield the function of detection power (0:no shield ,1:shield)
>cfg_disable_PWR_det:0
#shield the function of detection filament (0:no shield ,1:shield)
>cfg_disable_MT_det:0
#Whether to support the function of dual extruder single nozzle.(0: disable, 1: enable)
#the extruder number need set to dual.
>cfg_single_nozzle:0
#For the M110 command plus check, the version of Marlin 1.0.2 and below is set to 1, and the other versions are set to 0.
>cfg_M110_add_checkSum:0
#Enable function of display error message. (no:0; Yes:1）
>cfg_display_eeror_message:1
#-----------------------------------------------------------------------