error in fileload () 'module' object is not callable

[GoogleCodeExporter]

Cannot seem to be able to reopen any saved profiles.

Version 0.3.3 (Created with 0.3.3)

MAC OSX 10.6.6.. USER is with Admin rights.

Everytime I try to open one of the three profiles I just did, I get the error 
in fileload () 'module' object is not callable message

Thanks

Original issue reported on code.google.com by hugola...@gmail.com on 20 Feb 2011 at 4:36

[GoogleCodeExporter]

And I just verified and was able to open the profile Probat from issue ID#20...

Original comment by hugola...@gmail.com on 20 Feb 2011 at 4:41

[GoogleCodeExporter]

Original comment by hugola...@gmail.com on 20 Feb 2011 at 4:52

Attachments:

• guatfincasandiegosm.txt
• guatmaravilla.txt
• ncesm.txt

[GoogleCodeExporter]

And has to the Probat profile,  I was able to resave it to another name and 
reopen it

Original comment by hugola...@gmail.com on 20 Feb 2011 at 4:53

[GoogleCodeExporter]

Investigating further. Just started a new profile. Didnt edit any of the roast 
properties.. just did a quick ON,CHARGE, ,FC,FCe, OFF. Saved it.. Same results.

Original comment by hugola...@gmail.com on 20 Feb 2011 at 5:04

[GoogleCodeExporter]

And creating a new profile editing strickly the roast properties and saving 
works no problem.. So problem occurs when roast data exist 

Original comment by hugola...@gmail.com on 20 Feb 2011 at 5:08

[GoogleCodeExporter]

All configurations are at default. Temperature in Celcius mode. Device at none 
(manual)

Original comment by hugola...@gmail.com on 20 Feb 2011 at 5:25

[GoogleCodeExporter]

seems like if I don't interpolate after the off function, everything is fine... 
The interpolation makes that profile unreadable from that point.

Original comment by hugola...@gmail.com on 20 Feb 2011 at 5:43

[GoogleCodeExporter]

Quick test was opening the Probat profile discussed earlier.. Did an 
interpolate.. save.. and now can't reopen it

Original comment by hugola...@gmail.com on 20 Feb 2011 at 5:44

[GoogleCodeExporter]

Issue 24 has been merged into this issue.

Original comment by luther.m...@gmail.com on 20 Feb 2011 at 4:23

[GoogleCodeExporter]

Thanks for the detailed report. This would have been difficult to catch without 
it. Fixed in revision 229. Will be released with v0.3.4.

Original comment by luther.m...@gmail.com on 20 Feb 2011 at 4:24

• Changed state: Fixed

[GoogleCodeExporter]

Anyway my profiles that I've attached earlier can be rescued?

Original comment by hugola...@gmail.com on 20 Feb 2011 at 5:13

[GoogleCodeExporter]

Original comment by zaub...@yahoo.com on 20 Feb 2011 at 5:41

Attachments:

• guatfincasandiegosmRESCUED.txt
• guatmaravillaRESCUED.txt
• ncesmRESCUED.txt

[GoogleCodeExporter]

Rockin. Thank you. Got the OMEGA HH802 on order and looking forward to more 
experimentation with Artisan!!!
Hugo

Original comment by hugola...@gmail.com on 20 Feb 2011 at 6:39

[GoogleCodeExporter]

And the OMEGA HH802U arrived. Plug and Play. First real time log for roast 
down!n Thank you for the support

Original comment by hugola...@gmail.com on 22 Feb 2011 at 12:19