Note
There are two ways to install and use AvaFrame:
- Operational (GUI)
If you want the operational workflow, running com1DFA (dense flow avalanche) and com2AB (alpha beta) with standard settings from within QGis, head over to the
installation:Operational Installation
(Deutsche Version<installation:Operationelle Installation (Deutsch)>
) section. Use this if you want to:- use the standard, well tested and calibrated setup for hazard mapping or similar
- use QGis as frontend
- have results in a short amount of time
- use the latest release
- Advanced (Script)
If you want to contribute and develop AvaFrame, head over to
advancedUsage:Advanced (Script) Installation
. Use this if you want to:- work on the code itself
- implement new features
- change/improve existing code
- have the latest development code. Warning: might be unstable!
This is the quick start for the operational AvaFrame setup with QGis as frontend.
The prerequisites are:
- QGis: install from here: QGis installation (we recommend using the latest version)
- Open QGis from your start menu and go to Plugins -> Manage and Install Plugins
- Search for AvaFrameConnector and install it
- Wait for it to finish and restart QGis
- Access the QGis - Avaframe connector via Toolbox -> AvaFrame -> Operational -> FullOperationalRun
- Add the described data and run. Results will be loaded after a while (depending on the size of your DEM)
This tries to install the AvaFrame core package as well (since AvaFrameConnector version 1.2). If it fails, head over to the operational:Manual Installation
instructions.
For more information about the functions in the AvaFrameConnector, see connector:AvaFrameConnector (GUI)
- Restart/Open QGis from your start menu and go to Plugins -> Manage and Install Plugins
- Search for AvaFrameConnector and check whether it also needs updating
- Access the QGis - Avaframe connector via Toolbox -> AvaFrame
- Go to the Admin section, choose and run Update
Operationelle Installation (Deutsch) -------------------------------
Dies ist der Schnellstart für die Verwendung von AvaFrame mit QGis als Frontend.
Die Vorraussetzungen sind:
- QGis: QGis installation (Wir empfehlen die aktuellste Version zu verwenden)
- Öffnen Sie QGis über Ihr Startmenü und gehen Sie zu Erweiterungen -> Erweiterungen verwalten und installieren
- Nach AvaFrameConnector suchen und installieren
- Warten Sie, bis der Vorgang abgeschlossen ist und starten Sie QGis neu
- Rufen Sie den QGis - AvaframeConnector über Verarbeitungswerkzeuge -> AvaFrame -> Operational -> FullOperationalRun auf
- Fügen Sie die beschriebenen Daten hinzu und starten Sie den Connector. Die Ergebnisse werden nach einer Weile geladen (abhängig von der Größe Ihres DEM)
Hiermit wird versucht das AvaFrame-Kernpaket zu installieren (seit AvaFrameConnector Version 1.2). Wenn dies fehlschlägt, gehen Sie zu: operationalGerman:Manuelle Installation
.
Für eine Kurzzusammenfassung der Funktionen des AvaFrameConnector, siehe connector:AvaFrameConnector (GUI)
.
- Starten Sie QGis neu/öffnen Sie es über Ihr Startmenü und gehen Sie zu Plugins -> Plugins verwalten und installieren
- Suchen Sie nach AvaFrameConnector und prüfen Sie, ob es aktualisiert werden muss
- Rufen Sie den QGis - AvaframeConnector über Verarbeitungswerkzeuge -> AvaFrame auf
- Dann -> Admin -> Update aufrufen