Skip to content

Latest commit

 

History

History
213 lines (155 loc) · 12.3 KB

README.md

File metadata and controls

213 lines (155 loc) · 12.3 KB

Session-Service

This service stands between the browser and automate-dex. It acts as an OIDC client to Dex, and uses the Authorization Code Flow.

After having succeeded in this flow, it'll create a session for that client (browser), and store (in its end!) the client's refresh_token. The id_token it passes on to the browser in a manner that is similar to the Implicit Flow. (It's only similar because we're currently ignoring the nonce parameter: automate-ui doesn't send it, and session-service doesn't handle it.)

This service uses scs for storing information linked to a user's session.

Rationale

The kind of session management this service introduces allows us to decouple id_token expiry from the user has to login again. By allowing for a session-based refresh of id_tokens, we're informed by the upstream OIDC identity provider (Dex) about changes to the user's groups; or the user's existence: if the refresh fails, there's no new id_token, and when the already issued id_tokens expire, there's no way to do API requests anymore (for deleted users).

We require the UI client to pass in their current id_token when trying to refresh a session, and the token will only be validated to a limited extent. This is because we want to decouple token expiry from session expiry: It's quite possible the user has just reopened their laptop after lunch, and of course their old 10min-expiry id_token has expired by then. However, if they're asking for a refresh although their token hasn't expired yet, session-service will just pass the old one back. This allows session-service to not have to know the specifics of any configured IdP connector: If the system uses SAML (which doesn't work with refresh_tokens), the interaction between session-service and automate-ui doesn't look any different than it does with connectors that support it. The only exception, of course, is that upon expiry, the SAML case will fail to refresh (there's no refresh_token), so the client is sent to Dex to get a fresh token.

HTTP API

The following endpoints are currently served. They are briefly summarized below. Please see the Session Flow section below for more detail.

Note that we currently support two flows:

  1. /new, /callback, and /refresh were originally created to support automate-ui in getting an initial id_token, and subsequently refreshing it.
  2. /new, /callback, /token, and /userinfo were altered to support Builder in authenticating users using A2's authentication stack.

For flow (2.), session-service behaves in a way that resembles OAuth2 (and OIDC). As far as Builder is concerned, authenticating using A2 is like authenticating with any other OAuth2 provider. However, we're not as strict as we an OAuth2 server should be: there's no validation of client credentials, nonces, or registered redirect URIs.

The fork in the road regarding whether the flow is (1.) or (2.) is currently the existence of a redirect_uri query parameter in the initial request to /new.

GET /new

Initiate auth code flow; ending in a new session and a final redirect containing the id_token.

When the initial request includes a redirect_uri query parameter, the handler identifies this as being part of a login flow for another client. (Currently, this means Builder authenticating via A2.) The redirect_uri, if provided, will be recorded in the session. It's effective in the callback handler below.

GET /callback

OIDC callback handler; exchanges code, stores refresh_token, creates a session, redirects with id_token in URL fragment.

Diagram for /new -> /callback -> browser has session flow:

redirect_uri provided

If the session data carries a redirect_uri, the callback handler slightly changes its behavior: it will generate a new code, associate the exchanged id_token with it, and redirect the browser to the Builder Signin URL as configured with session-service. In accordance to the OAuth2 specification's Authorization Code Grant flow, this redirect contains the generated code.

GET /refresh

Expects session cookie, uses stored refresh_token to get a fresh id_token, return it (issues a new session ID).

This is the only handler that expects an id_token to be passed in via the Authorization header (e.g. Authorization: bearer X.Y.Z). The passed-in token is validated (checking signature only, it's ignoring both the audience claim and the token's expiry).

POST /token

This request is part of the Authorization Code Grant. The handler expects a code, and looks up the id_token associated with that code in the service's /callback handler. If an id_token is found, it's returned.

GET /userinfo

For Builder authenticating with A2, this is the OAuth2 "userinfo" endpoint. It expects a request with an Authorization: bearer ID_TOKEN header, validates and decodes the passed id_token, and returns a JSON object informing the caller about the user data associated with that token.

Since we're using JWT ID tokens, the client (Builder) would be able to figure this out on its own, but we're hiding this implementation detail from the client.

Session Flow

Let's cover in detail the general flow that session-service implements.

Get a New Session

When a user logs out or if no session yet exists, the UI will kick off a /new request to session-service. The first thing the /new handler does is generate a session cookie that will be used to store your session inside scs's store. Scs is a session storage service that allows us to generate a session cookie per user session and store information linked to that session. The session cookie will be returned to the browser. Since it's a cookie, it will be sent up with subsequent requests to the /refresh endpoint (more on that later).

The browser also sends up state information that contains the original webpage the user was on when the /new session request was kicked off so that we can drop them back there on completion. This state is stored in scs under the session key as well.

Now that the session cookie has been added to the http request context for the /new handler, session-service will kick off the oauth2 auth code flow by redirecting to Dex (with the session cookie being forwarded in the cookie along with it).

Once there, Dex will allow the user to authenticate and redirect back to the session-service /callback endpoint.

Callback after Successful AuthN (handling the auth code flow)

The /callback endpoint handles the callback of the oauth2 auth code flow. For starters, it takes the code returned from the Dex callback request to session service and exchanges it for an oauth2 token.

Now that it has an oauth2 token, it extracts both an id_token and the refresh_token from the oath2 token.

The id_token is a short (shorter at least, more on that later) lived token that contains the claims about the user (e.g. LDAP groups, etc) that the browser can then use to authenticate against authn-service when making API requests. This is returned to the browser from both this /callback and on requests to /refresh.

The refresh_token has no expiration and can be used to get new id_tokens ad nauseam . We get the refresh_token out of the initial oauth2 auth code flow response and it is scoped to a specific user. The refresh_token is never exposed outside of session-service. Instead, it is stored in scs database, using the session cookie string originally created in the /new call as the key. In subsequent calls to /refresh, the refresh_token can be retrieved from the scs database by looking it up via the session cookie.

Now that the id_token has been parsed out and the refresh_token has been successfully stored in scs under the session cookie key, the /callback endpoint redirects back to the original URL that the browser was at in Automate UI before the user logged out. This URL was stored in the scs database under the session by the /new handler. After redirect, the browser parses the id_token out of a fragment and stores id_token in its local storage. The session is also stored in a cookie for future refreshes.

Refresh that id_token

Quick Aside: id_tokens, refresh_tokens, expiries, oh my!

Now is a good time to talk about the lifetime of id_tokens. An id_token should be very short-lived for both local users and LDAP as those both support refresh_tokens. This is so that we can ensure that the claim information around LDAP groups stays relatively up to date as the id_token is constantly expiring and needing to be refreshed. This is not the case for SAML is the Dex adapter for SAML does not support refresh_tokens, so the user will have the same id_token for their entire session (id_token expiry is set to 24h in SAML mode). id_token expiry is configured in Dex.

Therefore, in non-SAML cases, a constant refresh is required to get a new id_token before the old one expires and API requests start failing with 401s. The Automate UI sends a /refresh request every minute to session-service. This request contains the session cookie ID string. As long as the UI is making refresh requests faster than the id_tokens are expiring, the user will remain logged in, at least until they close their browser and don't refresh their id_token. When that happens, the next time Automate UI tries to make an API request with the old id_token sitting in local storage, it will get a 401, triggering the browser to get a whole new session.

Refresh Handler

When handling the /refresh request, session-service first grabs the session cookie ID string out of the request. It uses this to get the refresh_token out of the scs store. If it can't retrieve the session information out of the scs store, a 401 is returned (which should only happen if a refresh request has been submitted for a logged out user, we have not currently configured scs sessions to have an expiration).

Next, we take the existing id_token (sent up by to the /refresh request from the browser in the Authorization header) and check to see if it is close to expiring. If the id_token isn't about to expire, we simply return the old id_token back to the browser and it can continue to use it to make requests against the API.

However, if the id_token is close to expiration, there are two cases:

  1. We are in SAML mode and there is no refresh_token.
  2. We are not in SAML mode and we now have a refresh_token.

In SAML mode, we always return the existing id_token since we can't refresh and get a new one anyway. Once it expires, the API will return a 401 on the next API request and the browser will make a /new session request, starting the whole process over, eventually returning an id_token with a 24 hour expiration (expiry configured in Dex).

In non-SAML mode, we have a refresh_token we can use to get a new id_token. It uses the refresh_token to send a refresh request to Dex, which returns a fresh id_token. The fresh id_token and the session cookie are returned to the browser. It can then use the fresh id_token to make API requests and the session cookie to start the /refresh process all over in another minute. In non-SAML mode, this continues indefinitely (since we haven't configured a session expiry in scs and refresh_tokens live forever, we should probably think about setting a scs session expiration though) until either the user logs out or they don't refresh their id_token before it expires and the browser gets a 401, triggering a /new session anyway.

Logging Out

When the user hits log out in the the browser, it actually just submits a /new request to session-service. If there is an existing session cookie, it is sent up to /new which is used to retrieve and replace the existing scs session. Regardless, a new session cookie is made, stored in scs (either overwriting the existing store or creating a new one), and the whole process starts again as described at the start of this Session Flow document.

Future Use

This service will be used for managing (list/delete) active sessions.