api_op_UploadMultipartPart.go

// Code generated by smithy-go-codegen DO NOT EDIT.

package glacier

import (
	"context"
	awsmiddleware "github.com/aws/aws-sdk-go-v2/aws/middleware"
	"github.com/aws/aws-sdk-go-v2/aws/signer/v4"
	glaciercust "github.com/aws/aws-sdk-go-v2/service/glacier/internal/customizations"
	"github.com/aws/smithy-go/middleware"
	smithyhttp "github.com/aws/smithy-go/transport/http"
	"io"
)

// This operation uploads a part of an archive. You can upload archive parts in any
// order. You can also upload them in parallel. You can upload up to 10,000 parts
// for a multipart upload. Amazon Glacier rejects your upload part request if any
// of the following conditions is true:
//
// * SHA256 tree hash does not matchTo ensure
// that part data is not corrupted in transmission, you compute a SHA256 tree hash
// of the part and include it in your request. Upon receiving the part data, Amazon
// S3 Glacier also computes a SHA256 tree hash. If these hash values don't match,
// the operation fails. For information about computing a SHA256 tree hash, see
// Computing Checksums
// (https://docs.aws.amazon.com/amazonglacier/latest/dev/checksum-calculations.html).
//
// *
// Part size does not matchThe size of each part except the last must match the
// size specified in the corresponding InitiateMultipartUpload request. The size of
// the last part must be the same size as, or smaller than, the specified size. If
// you upload a part whose size is smaller than the part size you specified in your
// initiate multipart upload request and that part is not the last part, then the
// upload part request will succeed. However, the subsequent Complete Multipart
// Upload request will fail.
//
// * Range does not alignThe byte range value in the
// request does not align with the part size specified in the corresponding
// initiate request. For example, if you specify a part size of 4194304 bytes (4
// MB), then 0 to 4194303 bytes (4 MB - 1) and 4194304 (4 MB) to 8388607 (8 MB - 1)
// are valid part ranges. However, if you set a range value of 2 MB to 6 MB, the
// range does not align with the part size and the upload will fail.
//
// This
// operation is idempotent. If you upload the same part multiple times, the data
// included in the most recent request overwrites the previously uploaded data. An
// AWS account has full permission to perform all operations (actions). However,
// AWS Identity and Access Management (IAM) users don't have any permissions by
// default. You must grant them explicit permission to perform specific actions.
// For more information, see Access Control Using AWS Identity and Access
// Management (IAM)
// (https://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html).
// For conceptual information and underlying REST API, see Uploading Large Archives
// in Parts (Multipart Upload)
// (https://docs.aws.amazon.com/amazonglacier/latest/dev/uploading-archive-mpu.html)
// and Upload Part
// (https://docs.aws.amazon.com/amazonglacier/latest/dev/api-upload-part.html) in
// the Amazon Glacier Developer Guide.
func (c *Client) UploadMultipartPart(ctx context.Context, params *UploadMultipartPartInput, optFns ...func(*Options)) (*UploadMultipartPartOutput, error) {
	if params == nil {
		params = &UploadMultipartPartInput{}
	}

	result, metadata, err := c.invokeOperation(ctx, "UploadMultipartPart", params, optFns, c.addOperationUploadMultipartPartMiddlewares)
	if err != nil {
		return nil, err
	}

	out := result.(*UploadMultipartPartOutput)
	out.ResultMetadata = metadata
	return out, nil
}

// Provides options to upload a part of an archive in a multipart upload operation.
type UploadMultipartPartInput struct {

	// The AccountId value is the AWS account ID of the account that owns the vault.
	// You can either specify an AWS account ID or optionally a single '-' (hyphen), in
	// which case Amazon S3 Glacier uses the AWS account ID associated with the
	// credentials used to sign the request. If you use an account ID, do not include
	// any hyphens ('-') in the ID.
	//
	// This member is required.
	AccountId *string

	// The upload ID of the multipart upload.
	//
	// This member is required.
	UploadId *string

	// The name of the vault.
	//
	// This member is required.
	VaultName *string

	// The data to upload.
	Body io.Reader

	// The SHA256 tree hash of the data being uploaded.
	Checksum *string

	// Identifies the range of bytes in the assembled archive that will be uploaded in
	// this part. Amazon S3 Glacier uses this information to assemble the archive in
	// the proper sequence. The format of this header follows RFC 2616. An example
	// header is Content-Range:bytes 0-4194303/*.
	Range *string

	noSmithyDocumentSerde
}

// Contains the Amazon S3 Glacier response to your request.
type UploadMultipartPartOutput struct {

	// The SHA256 tree hash that Amazon S3 Glacier computed for the uploaded part.
	Checksum *string

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata

	noSmithyDocumentSerde
}

func (c *Client) addOperationUploadMultipartPartMiddlewares(stack *middleware.Stack, options Options) (err error) {
	err = stack.Serialize.Add(&awsRestjson1_serializeOpUploadMultipartPart{}, middleware.After)
	if err != nil {
		return err
	}
	err = stack.Deserialize.Add(&awsRestjson1_deserializeOpUploadMultipartPart{}, middleware.After)
	if err != nil {
		return err
	}
	if err = addSetLoggerMiddleware(stack, options); err != nil {
		return err
	}
	if err = awsmiddleware.AddClientRequestIDMiddleware(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddComputeContentLengthMiddleware(stack); err != nil {
		return err
	}
	if err = addResolveEndpointMiddleware(stack, options); err != nil {
		return err
	}
	if err = v4.AddComputePayloadSHA256Middleware(stack); err != nil {
		return err
	}
	if err = addRetryMiddlewares(stack, options); err != nil {
		return err
	}
	if err = addHTTPSignerV4Middleware(stack, options); err != nil {
		return err
	}
	if err = awsmiddleware.AddRawResponseToMetadata(stack); err != nil {
		return err
	}
	if err = awsmiddleware.AddRecordResponseTiming(stack); err != nil {
		return err
	}
	if err = addClientUserAgent(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddErrorCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = addOpUploadMultipartPartValidationMiddleware(stack); err != nil {
		return err
	}
	if err = stack.Initialize.Add(newServiceMetadataMiddleware_opUploadMultipartPart(options.Region), middleware.Before); err != nil {
		return err
	}
	if err = addRequestIDRetrieverMiddleware(stack); err != nil {
		return err
	}
	if err = addResponseErrorMiddleware(stack); err != nil {
		return err
	}
	if err = glaciercust.AddTreeHashMiddleware(stack); err != nil {
		return err
	}
	if err = glaciercust.AddGlacierAPIVersionMiddleware(stack, ServiceAPIVersion); err != nil {
		return err
	}
	if err = glaciercust.AddDefaultAccountIDMiddleware(stack, setDefaultAccountID); err != nil {
		return err
	}
	if err = addRequestResponseLogging(stack, options); err != nil {
		return err
	}
	return nil
}

func newServiceMetadataMiddleware_opUploadMultipartPart(region string) *awsmiddleware.RegisterServiceMetadata {
	return &awsmiddleware.RegisterServiceMetadata{
		Region:        region,
		ServiceID:     ServiceID,
		SigningName:   "glacier",
		OperationName: "UploadMultipartPart",
	}
}