api_op_SendTemplatedEmail.go

// Code generated by smithy-go-codegen DO NOT EDIT.

package ses

import (
	"context"
	awsmiddleware "github.com/aws/aws-sdk-go-v2/aws/middleware"
	"github.com/aws/aws-sdk-go-v2/aws/signer/v4"
	"github.com/aws/aws-sdk-go-v2/service/ses/types"
	"github.com/aws/smithy-go/middleware"
	smithyhttp "github.com/aws/smithy-go/transport/http"
)

// Composes an email message using an email template and immediately queues it for
// sending. In order to send email using the SendTemplatedEmail operation, your
// call to the API must meet the following requirements:
//
// * The call must refer to
// an existing email template. You can create email templates using the
// CreateTemplate operation.
//
// * The message must be sent from a verified email
// address or domain.
//
// * If your account is still in the Amazon SES sandbox, you
// may only send to verified addresses or domains, or to email addresses associated
// with the Amazon SES Mailbox Simulator. For more information, see Verifying Email
// Addresses and Domains
// (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/verify-addresses-and-domains.html)
// in the Amazon SES Developer Guide.
//
// * The maximum message size is 10 MB.
//
// *
// Calls to the SendTemplatedEmail operation may only include one Destination
// parameter. A destination is a set of recipients who will receive the same
// version of the email. The Destination parameter can include up to 50 recipients,
// across the To:, CC: and BCC: fields.
//
// * The Destination parameter must include
// at least one recipient email address. The recipient address can be a To:
// address, a CC: address, or a BCC: address. If a recipient email address is
// invalid (that is, it is not in the format
// UserName@[SubDomain.]Domain.TopLevelDomain), the entire message will be
// rejected, even if the message contains other recipients that are valid.
//
// If your
// call to the SendTemplatedEmail operation includes all of the required
// parameters, Amazon SES accepts it and returns a Message ID. However, if Amazon
// SES can't render the email because the template contains errors, it doesn't send
// the email. Additionally, because it already accepted the message, Amazon SES
// doesn't return a message stating that it was unable to send the email. For these
// reasons, we highly recommend that you set up Amazon SES to send you
// notifications when Rendering Failure events occur. For more information, see
// Sending Personalized Email Using the Amazon SES API
// (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/send-personalized-email-api.html)
// in the Amazon Simple Email Service Developer Guide.
func (c *Client) SendTemplatedEmail(ctx context.Context, params *SendTemplatedEmailInput, optFns ...func(*Options)) (*SendTemplatedEmailOutput, error) {
	if params == nil {
		params = &SendTemplatedEmailInput{}
	}

	result, metadata, err := c.invokeOperation(ctx, "SendTemplatedEmail", params, optFns, c.addOperationSendTemplatedEmailMiddlewares)
	if err != nil {
		return nil, err
	}

	out := result.(*SendTemplatedEmailOutput)
	out.ResultMetadata = metadata
	return out, nil
}

// Represents a request to send a templated email using Amazon SES. For more
// information, see the Amazon SES Developer Guide
// (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/send-personalized-email-api.html).
type SendTemplatedEmailInput struct {

	// The destination for this email, composed of To:, CC:, and BCC: fields. A
	// Destination can include up to 50 recipients across these three fields.
	//
	// This member is required.
	Destination *types.Destination

	// The email address that is sending the email. This email address must be either
	// individually verified with Amazon SES, or from a domain that has been verified
	// with Amazon SES. For information about verifying identities, see the Amazon SES
	// Developer Guide
	// (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/verify-addresses-and-domains.html).
	// If you are sending on behalf of another user and have been permitted to do so by
	// a sending authorization policy, then you must also specify the SourceArn
	// parameter. For more information about sending authorization, see the Amazon SES
	// Developer Guide
	// (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization.html).
	// Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531
	// (https://tools.ietf.org/html/rfc6531). For this reason, the local part of a
	// source email address (the part of the email address that precedes the @ sign)
	// may only contain 7-bit ASCII characters
	// (https://en.wikipedia.org/wiki/Email_address#Local-part). If the domain part of
	// an address (the part after the @ sign) contains non-ASCII characters, they must
	// be encoded using Punycode, as described in RFC3492
	// (https://tools.ietf.org/html/rfc3492.html). The sender name (also known as the
	// friendly name) may contain non-ASCII characters. These characters must be
	// encoded using MIME encoded-word syntax, as described inRFC 2047
	// (https://tools.ietf.org/html/rfc2047). MIME encoded-word syntax uses the
	// following form: =?charset?encoding?encoded-text?=.
	//
	// This member is required.
	Source *string

	// The template to use when sending this email.
	//
	// This member is required.
	Template *string

	// A list of replacement values to apply to the template. This parameter is a JSON
	// object, typically consisting of key-value pairs in which the keys correspond to
	// replacement tags in the email template.
	//
	// This member is required.
	TemplateData *string

	// The name of the configuration set to use when you send an email using
	// SendTemplatedEmail.
	ConfigurationSetName *string

	// The reply-to email address(es) for the message. If the recipient replies to the
	// message, each reply-to address will receive the reply.
	ReplyToAddresses []string

	// The email address that bounces and complaints will be forwarded to when feedback
	// forwarding is enabled. If the message cannot be delivered to the recipient, then
	// an error message will be returned from the recipient's ISP; this message will
	// then be forwarded to the email address specified by the ReturnPath parameter.
	// The ReturnPath parameter is never overwritten. This email address must be either
	// individually verified with Amazon SES, or from a domain that has been verified
	// with Amazon SES.
	ReturnPath *string

	// This parameter is used only for sending authorization. It is the ARN of the
	// identity that is associated with the sending authorization policy that permits
	// you to use the email address specified in the ReturnPath parameter. For example,
	// if the owner of example.com (which has ARN
	// arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it
	// that authorizes you to use feedback@example.com, then you would specify the
	// ReturnPathArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and
	// the ReturnPath to be feedback@example.com. For more information about sending
	// authorization, see the Amazon SES Developer Guide
	// (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization.html).
	ReturnPathArn *string

	// This parameter is used only for sending authorization. It is the ARN of the
	// identity that is associated with the sending authorization policy that permits
	// you to send for the email address specified in the Source parameter. For
	// example, if the owner of example.com (which has ARN
	// arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it
	// that authorizes you to send from user@example.com, then you would specify the
	// SourceArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the
	// Source to be user@example.com. For more information about sending authorization,
	// see the Amazon SES Developer Guide
	// (https://docs.aws.amazon.com/ses/latest/DeveloperGuide/sending-authorization.html).
	SourceArn *string

	// A list of tags, in the form of name/value pairs, to apply to an email that you
	// send using SendTemplatedEmail. Tags correspond to characteristics of the email
	// that you define, so that you can publish email sending events.
	Tags []types.MessageTag

	// The ARN of the template to use when sending this email.
	TemplateArn *string

	noSmithyDocumentSerde
}

type SendTemplatedEmailOutput struct {

	// The unique message identifier returned from the SendTemplatedEmail action.
	//
	// This member is required.
	MessageId *string

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata

	noSmithyDocumentSerde
}

func (c *Client) addOperationSendTemplatedEmailMiddlewares(stack *middleware.Stack, options Options) (err error) {
	err = stack.Serialize.Add(&awsAwsquery_serializeOpSendTemplatedEmail{}, middleware.After)
	if err != nil {
		return err
	}
	err = stack.Deserialize.Add(&awsAwsquery_deserializeOpSendTemplatedEmail{}, middleware.After)
	if err != nil {
		return err
	}
	if err = addSetLoggerMiddleware(stack, options); err != nil {
		return err
	}
	if err = awsmiddleware.AddClientRequestIDMiddleware(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddComputeContentLengthMiddleware(stack); err != nil {
		return err
	}
	if err = addResolveEndpointMiddleware(stack, options); err != nil {
		return err
	}
	if err = v4.AddComputePayloadSHA256Middleware(stack); err != nil {
		return err
	}
	if err = addRetryMiddlewares(stack, options); err != nil {
		return err
	}
	if err = addHTTPSignerV4Middleware(stack, options); err != nil {
		return err
	}
	if err = awsmiddleware.AddRawResponseToMetadata(stack); err != nil {
		return err
	}
	if err = awsmiddleware.AddRecordResponseTiming(stack); err != nil {
		return err
	}
	if err = addClientUserAgent(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddErrorCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = addOpSendTemplatedEmailValidationMiddleware(stack); err != nil {
		return err
	}
	if err = stack.Initialize.Add(newServiceMetadataMiddleware_opSendTemplatedEmail(options.Region), middleware.Before); err != nil {
		return err
	}
	if err = addRequestIDRetrieverMiddleware(stack); err != nil {
		return err
	}
	if err = addResponseErrorMiddleware(stack); err != nil {
		return err
	}
	if err = addRequestResponseLogging(stack, options); err != nil {
		return err
	}
	return nil
}

func newServiceMetadataMiddleware_opSendTemplatedEmail(region string) *awsmiddleware.RegisterServiceMetadata {
	return &awsmiddleware.RegisterServiceMetadata{
		Region:        region,
		ServiceID:     ServiceID,
		SigningName:   "ses",
		OperationName: "SendTemplatedEmail",
	}
}