types.go

// Code generated by smithy-go-codegen DO NOT EDIT.

package types

import (
	smithydocument "github.com/aws/smithy-go/document"
	"time"
)

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. The ActivatedRule object in an UpdateWebACL request specifies a Rule
// that you want to insert or delete, the priority of the Rule in the WebACL, and
// the action that you want AWS WAF to take when a web request matches the Rule
// (ALLOW, BLOCK, or COUNT). To specify whether to insert or delete a Rule, use the
// Action parameter in the WebACLUpdate data type.
type ActivatedRule struct {

	// Specifies the order in which the Rules in a WebACL are evaluated. Rules with a
	// lower value for Priority are evaluated before Rules with a higher value. The
	// value must be a unique integer. If you add multiple Rules to a WebACL, the
	// values don't need to be consecutive.
	//
	// This member is required.
	Priority *int32

	// The RuleId for a Rule. You use RuleId to get more information about a Rule (see
	// GetRule), update a Rule (see UpdateRule), insert a Rule into a WebACL or delete
	// a one from a WebACL (see UpdateWebACL), or delete a Rule from AWS WAF (see
	// DeleteRule). RuleId is returned by CreateRule and by ListRules.
	//
	// This member is required.
	RuleId *string

	// Specifies the action that CloudFront or AWS WAF takes when a web request matches
	// the conditions in the Rule. Valid values for Action include the following:
	//
	// *
	// ALLOW: CloudFront responds with the requested object.
	//
	// * BLOCK: CloudFront
	// responds with an HTTP 403 (Forbidden) status code.
	//
	// * COUNT: AWS WAF increments
	// a counter of requests that match the conditions in the rule and then continues
	// to inspect the web request based on the remaining rules in the web
	// ACL.
	//
	// ActivatedRule|OverrideAction applies only when updating or adding a
	// RuleGroup to a WebACL. In this case, you do not use ActivatedRule|Action. For
	// all other update requests, ActivatedRule|Action is used instead of
	// ActivatedRule|OverrideAction.
	Action *WafAction

	// An array of rules to exclude from a rule group. This is applicable only when the
	// ActivatedRule refers to a RuleGroup. Sometimes it is necessary to troubleshoot
	// rule groups that are blocking traffic unexpectedly (false positives). One
	// troubleshooting technique is to identify the specific rule within the rule group
	// that is blocking the legitimate traffic and then disable (exclude) that
	// particular rule. You can exclude rules from both your own rule groups and AWS
	// Marketplace rule groups that have been associated with a web ACL. Specifying
	// ExcludedRules does not remove those rules from the rule group. Rather, it
	// changes the action for the rules to COUNT. Therefore, requests that match an
	// ExcludedRule are counted but not blocked. The RuleGroup owner will receive COUNT
	// metrics for each ExcludedRule. If you want to exclude rules from a rule group
	// that is already associated with a web ACL, perform the following steps:
	//
	// * Use
	// the AWS WAF logs to identify the IDs of the rules that you want to exclude. For
	// more information about the logs, see Logging Web ACL Traffic Information
	// (https://docs.aws.amazon.com/waf/latest/developerguide/logging.html).
	//
	// * Submit
	// an UpdateWebACL request that has two actions:
	//
	// * The first action deletes the
	// existing rule group from the web ACL. That is, in the UpdateWebACL request, the
	// first Updates:Action should be DELETE and Updates:ActivatedRule:RuleId should be
	// the rule group that contains the rules that you want to exclude.
	//
	// * The second
	// action inserts the same rule group back in, but specifying the rules to exclude.
	// That is, the second Updates:Action should be INSERT,
	// Updates:ActivatedRule:RuleId should be the rule group that you just removed, and
	// ExcludedRules should contain the rules that you want to exclude.
	ExcludedRules []ExcludedRule

	// Use the OverrideAction to test your RuleGroup. Any rule in a RuleGroup can
	// potentially block a request. If you set the OverrideAction to None, the
	// RuleGroup will block a request if any individual rule in the RuleGroup matches
	// the request and is configured to block that request. However if you first want
	// to test the RuleGroup, set the OverrideAction to Count. The RuleGroup will then
	// override any block action specified by individual rules contained within the
	// group. Instead of blocking matching requests, those requests will be counted.
	// You can view a record of counted requests using GetSampledRequests.
	// ActivatedRule|OverrideAction applies only when updating or adding a RuleGroup to
	// a WebACL. In this case you do not use ActivatedRule|Action. For all other update
	// requests, ActivatedRule|Action is used instead of ActivatedRule|OverrideAction.
	OverrideAction *WafOverrideAction

	// The rule type, either REGULAR, as defined by Rule, RATE_BASED, as defined by
	// RateBasedRule, or GROUP, as defined by RuleGroup. The default is REGULAR.
	// Although this field is optional, be aware that if you try to add a RATE_BASED
	// rule to a web ACL without setting the type, the UpdateWebACL request will fail
	// because the request tries to add a REGULAR rule with the specified ID, which
	// does not exist.
	Type WafRuleType

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. In a GetByteMatchSet request, ByteMatchSet is a complex type that
// contains the ByteMatchSetId and Name of a ByteMatchSet, and the values that you
// specified when you updated the ByteMatchSet. A complex type that contains
// ByteMatchTuple objects, which specify the parts of web requests that you want
// AWS WAF to inspect and the values that you want AWS WAF to search for. If a
// ByteMatchSet contains more than one ByteMatchTuple object, a request needs to
// match the settings in only one ByteMatchTuple to be considered a match.
type ByteMatchSet struct {

	// The ByteMatchSetId for a ByteMatchSet. You use ByteMatchSetId to get information
	// about a ByteMatchSet (see GetByteMatchSet), update a ByteMatchSet (see
	// UpdateByteMatchSet), insert a ByteMatchSet into a Rule or delete one from a Rule
	// (see UpdateRule), and delete a ByteMatchSet from AWS WAF (see
	// DeleteByteMatchSet). ByteMatchSetId is returned by CreateByteMatchSet and by
	// ListByteMatchSets.
	//
	// This member is required.
	ByteMatchSetId *string

	// Specifies the bytes (typically a string that corresponds with ASCII characters)
	// that you want AWS WAF to search for in web requests, the location in requests
	// that you want AWS WAF to search, and other settings.
	//
	// This member is required.
	ByteMatchTuples []ByteMatchTuple

	// A friendly name or description of the ByteMatchSet. You can't change Name after
	// you create a ByteMatchSet.
	Name *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Returned by ListByteMatchSets. Each ByteMatchSetSummary object
// includes the Name and ByteMatchSetId for one ByteMatchSet.
type ByteMatchSetSummary struct {

	// The ByteMatchSetId for a ByteMatchSet. You use ByteMatchSetId to get information
	// about a ByteMatchSet, update a ByteMatchSet, remove a ByteMatchSet from a Rule,
	// and delete a ByteMatchSet from AWS WAF. ByteMatchSetId is returned by
	// CreateByteMatchSet and by ListByteMatchSets.
	//
	// This member is required.
	ByteMatchSetId *string

	// A friendly name or description of the ByteMatchSet. You can't change Name after
	// you create a ByteMatchSet.
	//
	// This member is required.
	Name *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. In an UpdateByteMatchSet request, ByteMatchSetUpdate specifies
// whether to insert or delete a ByteMatchTuple and includes the settings for the
// ByteMatchTuple.
type ByteMatchSetUpdate struct {

	// Specifies whether to insert or delete a ByteMatchTuple.
	//
	// This member is required.
	Action ChangeAction

	// Information about the part of a web request that you want AWS WAF to inspect and
	// the value that you want AWS WAF to search for. If you specify DELETE for the
	// value of Action, the ByteMatchTuple values must exactly match the values in the
	// ByteMatchTuple that you want to delete from the ByteMatchSet.
	//
	// This member is required.
	ByteMatchTuple *ByteMatchTuple

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. The bytes (typically a string that corresponds with ASCII
// characters) that you want AWS WAF to search for in web requests, the location in
// requests that you want AWS WAF to search, and other settings.
type ByteMatchTuple struct {

	// The part of a web request that you want AWS WAF to search, such as a specified
	// header or a query string. For more information, see FieldToMatch.
	//
	// This member is required.
	FieldToMatch *FieldToMatch

	// Within the portion of a web request that you want to search (for example, in the
	// query string, if any), specify where you want AWS WAF to search. Valid values
	// include the following: CONTAINS The specified part of the web request must
	// include the value of TargetString, but the location doesn't matter.
	// CONTAINS_WORD The specified part of the web request must include the value of
	// TargetString, and TargetString must contain only alphanumeric characters or
	// underscore (A-Z, a-z, 0-9, or _). In addition, TargetString must be a word,
	// which means one of the following:
	//
	// * TargetString exactly matches the value of
	// the specified part of the web request, such as the value of a header.
	//
	// *
	// TargetString is at the beginning of the specified part of the web request and is
	// followed by a character other than an alphanumeric character or underscore (_),
	// for example, BadBot;.
	//
	// * TargetString is at the end of the specified part of the
	// web request and is preceded by a character other than an alphanumeric character
	// or underscore (_), for example, ;BadBot.
	//
	// * TargetString is in the middle of the
	// specified part of the web request and is preceded and followed by characters
	// other than alphanumeric characters or underscore (_), for example,
	// -BadBot;.
	//
	// EXACTLY The value of the specified part of the web request must
	// exactly match the value of TargetString. STARTS_WITH The value of TargetString
	// must appear at the beginning of the specified part of the web request. ENDS_WITH
	// The value of TargetString must appear at the end of the specified part of the
	// web request.
	//
	// This member is required.
	PositionalConstraint PositionalConstraint

	// The value that you want AWS WAF to search for. AWS WAF searches for the
	// specified string in the part of web requests that you specified in FieldToMatch.
	// The maximum length of the value is 50 bytes. Valid values depend on the values
	// that you specified for FieldToMatch:
	//
	// * HEADER: The value that you want AWS WAF
	// to search for in the request header that you specified in FieldToMatch, for
	// example, the value of the User-Agent or Referer header.
	//
	// * METHOD: The HTTP
	// method, which indicates the type of operation specified in the request.
	// CloudFront supports the following methods: DELETE, GET, HEAD, OPTIONS, PATCH,
	// POST, and PUT.
	//
	// * QUERY_STRING: The value that you want AWS WAF to search for in
	// the query string, which is the part of a URL that appears after a ?
	// character.
	//
	// * URI: The value that you want AWS WAF to search for in the part of
	// a URL that identifies a resource, for example, /images/daily-ad.jpg.
	//
	// * BODY:
	// The part of a request that contains any additional data that you want to send to
	// your web server as the HTTP request body, such as data from a form. The request
	// body immediately follows the request headers. Note that only the first 8192
	// bytes of the request body are forwarded to AWS WAF for inspection. To allow or
	// block requests based on the length of the body, you can create a size constraint
	// set. For more information, see CreateSizeConstraintSet.
	//
	// * SINGLE_QUERY_ARG: The
	// parameter in the query string that you will inspect, such as UserName or
	// SalesRegion. The maximum length for SINGLE_QUERY_ARG is 30 characters.
	//
	// *
	// ALL_QUERY_ARGS: Similar to SINGLE_QUERY_ARG, but instead of inspecting a single
	// parameter, AWS WAF inspects all parameters within the query string for the value
	// or regex pattern that you specify in TargetString.
	//
	// If TargetString includes
	// alphabetic characters A-Z and a-z, note that the value is case sensitive. If
	// you're using the AWS WAF API Specify a base64-encoded version of the value. The
	// maximum length of the value before you base64-encode it is 50 bytes. For
	// example, suppose the value of Type is HEADER and the value of Data is
	// User-Agent. If you want to search the User-Agent header for the value BadBot,
	// you base64-encode BadBot using MIME base64-encoding and include the resulting
	// value, QmFkQm90, in the value of TargetString. If you're using the AWS CLI or
	// one of the AWS SDKs The value that you want AWS WAF to search for. The SDK
	// automatically base64 encodes the value.
	//
	// This member is required.
	TargetString []byte

	// Text transformations eliminate some of the unusual formatting that attackers use
	// in web requests in an effort to bypass AWS WAF. If you specify a transformation,
	// AWS WAF performs the transformation on FieldToMatch before inspecting it for a
	// match. You can only specify a single type of TextTransformation. CMD_LINE When
	// you're concerned that attackers are injecting an operating system command line
	// command and using unusual formatting to disguise some or all of the command, use
	// this option to perform the following transformations:
	//
	// * Delete the following
	// characters: \ " ' ^
	//
	// * Delete spaces before the following characters: / (
	//
	// *
	// Replace the following characters with a space: , ;
	//
	// * Replace multiple spaces
	// with one space
	//
	// * Convert uppercase letters (A-Z) to lowercase
	// (a-z)
	//
	// COMPRESS_WHITE_SPACE Use this option to replace the following characters
	// with a space character (decimal 32):
	//
	// * \f, formfeed, decimal 12
	//
	// * \t, tab,
	// decimal 9
	//
	// * \n, newline, decimal 10
	//
	// * \r, carriage return, decimal 13
	//
	// * \v,
	// vertical tab, decimal 11
	//
	// * non-breaking space, decimal
	// 160
	//
	// COMPRESS_WHITE_SPACE also replaces multiple spaces with one space.
	// HTML_ENTITY_DECODE Use this option to replace HTML-encoded characters with
	// unencoded characters. HTML_ENTITY_DECODE performs the following operations:
	//
	// *
	// Replaces (ampersand)quot; with "
	//
	// * Replaces (ampersand)nbsp; with a
	// non-breaking space, decimal 160
	//
	// * Replaces (ampersand)lt; with a "less than"
	// symbol
	//
	// * Replaces (ampersand)gt; with >
	//
	// * Replaces characters that are
	// represented in hexadecimal format, (ampersand)#xhhhh;, with the corresponding
	// characters
	//
	// * Replaces characters that are represented in decimal format,
	// (ampersand)#nnnn;, with the corresponding characters
	//
	// LOWERCASE Use this option
	// to convert uppercase letters (A-Z) to lowercase (a-z). URL_DECODE Use this
	// option to decode a URL-encoded value. NONE Specify NONE if you don't want to
	// perform any text transformations.
	//
	// This member is required.
	TextTransformation TextTransformation

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. The rule to exclude from a rule group. This is applicable only when
// the ActivatedRule refers to a RuleGroup. The rule must belong to the RuleGroup
// that is specified by the ActivatedRule.
type ExcludedRule struct {

	// The unique identifier for the rule to exclude from the rule group.
	//
	// This member is required.
	RuleId *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Specifies where in a web request to look for TargetString.
type FieldToMatch struct {

	// The part of the web request that you want AWS WAF to search for a specified
	// string. Parts of a request that you can search include the following:
	//
	// * HEADER:
	// A specified request header, for example, the value of the User-Agent or Referer
	// header. If you choose HEADER for the type, specify the name of the header in
	// Data.
	//
	// * METHOD: The HTTP method, which indicated the type of operation that the
	// request is asking the origin to perform. Amazon CloudFront supports the
	// following methods: DELETE, GET, HEAD, OPTIONS, PATCH, POST, and PUT.
	//
	// *
	// QUERY_STRING: A query string, which is the part of a URL that appears after a ?
	// character, if any.
	//
	// * URI: The part of a web request that identifies a resource,
	// for example, /images/daily-ad.jpg.
	//
	// * BODY: The part of a request that contains
	// any additional data that you want to send to your web server as the HTTP request
	// body, such as data from a form. The request body immediately follows the request
	// headers. Note that only the first 8192 bytes of the request body are forwarded
	// to AWS WAF for inspection. To allow or block requests based on the length of the
	// body, you can create a size constraint set. For more information, see
	// CreateSizeConstraintSet.
	//
	// * SINGLE_QUERY_ARG: The parameter in the query string
	// that you will inspect, such as UserName or SalesRegion. The maximum length for
	// SINGLE_QUERY_ARG is 30 characters.
	//
	// * ALL_QUERY_ARGS: Similar to
	// SINGLE_QUERY_ARG, but rather than inspecting a single parameter, AWS WAF will
	// inspect all parameters within the query for the value or regex pattern that you
	// specify in TargetString.
	//
	// This member is required.
	Type MatchFieldType

	// When the value of Type is HEADER, enter the name of the header that you want AWS
	// WAF to search, for example, User-Agent or Referer. The name of the header is not
	// case sensitive. When the value of Type is SINGLE_QUERY_ARG, enter the name of
	// the parameter that you want AWS WAF to search, for example, UserName or
	// SalesRegion. The parameter name is not case sensitive. If the value of Type is
	// any other value, omit Data.
	Data *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. The country from which web requests originate that you want AWS WAF
// to search for.
type GeoMatchConstraint struct {

	// The type of geographical area you want AWS WAF to search for. Currently Country
	// is the only valid value.
	//
	// This member is required.
	Type GeoMatchConstraintType

	// The country that you want AWS WAF to search for.
	//
	// This member is required.
	Value GeoMatchConstraintValue

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Contains one or more countries that AWS WAF will search for.
type GeoMatchSet struct {

	// An array of GeoMatchConstraint objects, which contain the country that you want
	// AWS WAF to search for.
	//
	// This member is required.
	GeoMatchConstraints []GeoMatchConstraint

	// The GeoMatchSetId for an GeoMatchSet. You use GeoMatchSetId to get information
	// about a GeoMatchSet (see GeoMatchSet), update a GeoMatchSet (see
	// UpdateGeoMatchSet), insert a GeoMatchSet into a Rule or delete one from a Rule
	// (see UpdateRule), and delete a GeoMatchSet from AWS WAF (see DeleteGeoMatchSet).
	// GeoMatchSetId is returned by CreateGeoMatchSet and by ListGeoMatchSets.
	//
	// This member is required.
	GeoMatchSetId *string

	// A friendly name or description of the GeoMatchSet. You can't change the name of
	// an GeoMatchSet after you create it.
	Name *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Contains the identifier and the name of the GeoMatchSet.
type GeoMatchSetSummary struct {

	// The GeoMatchSetId for an GeoMatchSet. You can use GeoMatchSetId in a
	// GetGeoMatchSet request to get detailed information about an GeoMatchSet.
	//
	// This member is required.
	GeoMatchSetId *string

	// A friendly name or description of the GeoMatchSet. You can't change the name of
	// an GeoMatchSet after you create it.
	//
	// This member is required.
	Name *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Specifies the type of update to perform to an GeoMatchSet with
// UpdateGeoMatchSet.
type GeoMatchSetUpdate struct {

	// Specifies whether to insert or delete a country with UpdateGeoMatchSet.
	//
	// This member is required.
	Action ChangeAction

	// The country from which web requests originate that you want AWS WAF to search
	// for.
	//
	// This member is required.
	GeoMatchConstraint *GeoMatchConstraint

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. The response from a GetSampledRequests request includes an
// HTTPHeader complex type that appears as Headers in the response syntax.
// HTTPHeader contains the names and values of all of the headers that appear in
// one of the web requests that were returned by GetSampledRequests.
type HTTPHeader struct {

	// The name of one of the headers in the sampled web request.
	Name *string

	// The value of one of the headers in the sampled web request.
	Value *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. The response from a GetSampledRequests request includes an
// HTTPRequest complex type that appears as Request in the response syntax.
// HTTPRequest contains information about one of the web requests that were
// returned by GetSampledRequests.
type HTTPRequest struct {

	// The IP address that the request originated from. If the WebACL is associated
	// with a CloudFront distribution, this is the value of one of the following fields
	// in CloudFront access logs:
	//
	// * c-ip, if the viewer did not use an HTTP proxy or a
	// load balancer to send the request
	//
	// * x-forwarded-for, if the viewer did use an
	// HTTP proxy or a load balancer to send the request
	ClientIP *string

	// The two-letter country code for the country that the request originated from.
	// For a current list of country codes, see the Wikipedia entry ISO 3166-1 alpha-2
	// (https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2).
	Country *string

	// The HTTP version specified in the sampled web request, for example, HTTP/1.1.
	HTTPVersion *string

	// A complex type that contains two values for each header in the sampled web
	// request: the name of the header and the value of the header.
	Headers []HTTPHeader

	// The HTTP method specified in the sampled web request. CloudFront supports the
	// following methods: DELETE, GET, HEAD, OPTIONS, PATCH, POST, and PUT.
	Method *string

	// The part of a web request that identifies the resource, for example,
	// /images/daily-ad.jpg.
	URI *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Contains one or more IP addresses or blocks of IP addresses
// specified in Classless Inter-Domain Routing (CIDR) notation. AWS WAF supports
// IPv4 address ranges: /8 and any range between /16 through /32. AWS WAF supports
// IPv6 address ranges: /24, /32, /48, /56, /64, and /128. To specify an individual
// IP address, you specify the four-part IP address followed by a /32, for example,
// 192.0.2.0/32. To block a range of IP addresses, you can specify /8 or any range
// between /16 through /32 (for IPv4) or /24, /32, /48, /56, /64, or /128 (for
// IPv6). For more information about CIDR notation, see the Wikipedia entry
// Classless Inter-Domain Routing
// (https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing).
type IPSet struct {

	// The IP address type (IPV4 or IPV6) and the IP address range (in CIDR notation)
	// that web requests originate from. If the WebACL is associated with a CloudFront
	// distribution and the viewer did not use an HTTP proxy or a load balancer to send
	// the request, this is the value of the c-ip field in the CloudFront access logs.
	//
	// This member is required.
	IPSetDescriptors []IPSetDescriptor

	// The IPSetId for an IPSet. You use IPSetId to get information about an IPSet (see
	// GetIPSet), update an IPSet (see UpdateIPSet), insert an IPSet into a Rule or
	// delete one from a Rule (see UpdateRule), and delete an IPSet from AWS WAF (see
	// DeleteIPSet). IPSetId is returned by CreateIPSet and by ListIPSets.
	//
	// This member is required.
	IPSetId *string

	// A friendly name or description of the IPSet. You can't change the name of an
	// IPSet after you create it.
	Name *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Specifies the IP address type (IPV4 or IPV6) and the IP address
// range (in CIDR format) that web requests originate from.
type IPSetDescriptor struct {

	// Specify IPV4 or IPV6.
	//
	// This member is required.
	Type IPSetDescriptorType

	// Specify an IPv4 address by using CIDR notation. For example:
	//
	// * To configure AWS
	// WAF to allow, block, or count requests that originated from the IP address
	// 192.0.2.44, specify 192.0.2.44/32.
	//
	// * To configure AWS WAF to allow, block, or
	// count requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255,
	// specify 192.0.2.0/24.
	//
	// For more information about CIDR notation, see the
	// Wikipedia entry Classless Inter-Domain Routing
	// (https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing). Specify an IPv6
	// address by using CIDR notation. For example:
	//
	// * To configure AWS WAF to allow,
	// block, or count requests that originated from the IP address
	// 1111:0000:0000:0000:0000:0000:0000:0111, specify
	// 1111:0000:0000:0000:0000:0000:0000:0111/128.
	//
	// * To configure AWS WAF to allow,
	// block, or count requests that originated from IP addresses
	// 1111:0000:0000:0000:0000:0000:0000:0000 to
	// 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify
	// 1111:0000:0000:0000:0000:0000:0000:0000/64.
	//
	// This member is required.
	Value *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Contains the identifier and the name of the IPSet.
type IPSetSummary struct {

	// The IPSetId for an IPSet. You can use IPSetId in a GetIPSet request to get
	// detailed information about an IPSet.
	//
	// This member is required.
	IPSetId *string

	// A friendly name or description of the IPSet. You can't change the name of an
	// IPSet after you create it.
	//
	// This member is required.
	Name *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Specifies the type of update to perform to an IPSet with
// UpdateIPSet.
type IPSetUpdate struct {

	// Specifies whether to insert or delete an IP address with UpdateIPSet.
	//
	// This member is required.
	Action ChangeAction

	// The IP address type (IPV4 or IPV6) and the IP address range (in CIDR notation)
	// that web requests originate from.
	//
	// This member is required.
	IPSetDescriptor *IPSetDescriptor

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. The Amazon Kinesis Data Firehose, RedactedFields information, and
// the web ACL Amazon Resource Name (ARN).
type LoggingConfiguration struct {

	// An array of Amazon Kinesis Data Firehose ARNs.
	//
	// This member is required.
	LogDestinationConfigs []string

	// The Amazon Resource Name (ARN) of the web ACL that you want to associate with
	// LogDestinationConfigs.
	//
	// This member is required.
	ResourceArn *string

	// The parts of the request that you want redacted from the logs. For example, if
	// you redact the cookie field, the cookie field in the firehose will be xxx.
	RedactedFields []FieldToMatch

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Specifies the ByteMatchSet, IPSet, SqlInjectionMatchSet,
// XssMatchSet, RegexMatchSet, GeoMatchSet, and SizeConstraintSet objects that you
// want to add to a Rule and, for each object, indicates whether you want to negate
// the settings, for example, requests that do NOT originate from the IP address
// 192.0.2.44.
type Predicate struct {

	// A unique identifier for a predicate in a Rule, such as ByteMatchSetId or
	// IPSetId. The ID is returned by the corresponding Create or List command.
	//
	// This member is required.
	DataId *string

	// Set Negated to False if you want AWS WAF to allow, block, or count requests
	// based on the settings in the specified ByteMatchSet, IPSet,
	// SqlInjectionMatchSet, XssMatchSet, RegexMatchSet, GeoMatchSet, or
	// SizeConstraintSet. For example, if an IPSet includes the IP address 192.0.2.44,
	// AWS WAF will allow or block requests based on that IP address. Set Negated to
	// True if you want AWS WAF to allow or block a request based on the negation of
	// the settings in the ByteMatchSet, IPSet, SqlInjectionMatchSet, XssMatchSet,
	// RegexMatchSet, GeoMatchSet, or SizeConstraintSet. For example, if an IPSet
	// includes the IP address 192.0.2.44, AWS WAF will allow, block, or count requests
	// based on all IP addresses except 192.0.2.44.
	//
	// This member is required.
	Negated *bool

	// The type of predicate in a Rule, such as ByteMatch or IPSet.
	//
	// This member is required.
	Type PredicateType

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. A RateBasedRule is identical to a regular Rule, with one addition: a
// RateBasedRule counts the number of requests that arrive from a specified IP
// address every five minutes. For example, based on recent requests that you've
// seen from an attacker, you might create a RateBasedRule that includes the
// following conditions:
//
// * The requests come from 192.0.2.44.
//
// * They contain the
// value BadBot in the User-Agent header.
//
// In the rule, you also define the rate
// limit as 1,000. Requests that meet both of these conditions and exceed 1,000
// requests every five minutes trigger the rule's action (block or count), which is
// defined in the web ACL.
type RateBasedRule struct {

	// The Predicates object contains one Predicate element for each ByteMatchSet,
	// IPSet, or SqlInjectionMatchSet object that you want to include in a
	// RateBasedRule.
	//
	// This member is required.
	MatchPredicates []Predicate

	// The field that AWS WAF uses to determine if requests are likely arriving from
	// single source and thus subject to rate monitoring. The only valid value for
	// RateKey is IP. IP indicates that requests arriving from the same IP address are
	// subject to the RateLimit that is specified in the RateBasedRule.
	//
	// This member is required.
	RateKey RateKey

	// The maximum number of requests, which have an identical value in the field
	// specified by the RateKey, allowed in a five-minute period. If the number of
	// requests exceeds the RateLimit and the other predicates specified in the rule
	// are also met, AWS WAF triggers the action that is specified for this rule.
	//
	// This member is required.
	RateLimit int64

	// A unique identifier for a RateBasedRule. You use RuleId to get more information
	// about a RateBasedRule (see GetRateBasedRule), update a RateBasedRule (see
	// UpdateRateBasedRule), insert a RateBasedRule into a WebACL or delete one from a
	// WebACL (see UpdateWebACL), or delete a RateBasedRule from AWS WAF (see
	// DeleteRateBasedRule).
	//
	// This member is required.
	RuleId *string

	// A friendly name or description for the metrics for a RateBasedRule. The name can
	// contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128
	// and minimum length one. It can't contain whitespace or metric names reserved for
	// AWS WAF, including "All" and "Default_Action." You can't change the name of the
	// metric after you create the RateBasedRule.
	MetricName *string

	// A friendly name or description for a RateBasedRule. You can't change the name of
	// a RateBasedRule after you create it.
	Name *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. In a GetRegexMatchSet request, RegexMatchSet is a complex type that
// contains the RegexMatchSetId and Name of a RegexMatchSet, and the values that
// you specified when you updated the RegexMatchSet. The values are contained in a
// RegexMatchTuple object, which specify the parts of web requests that you want
// AWS WAF to inspect and the values that you want AWS WAF to search for. If a
// RegexMatchSet contains more than one RegexMatchTuple object, a request needs to
// match the settings in only one ByteMatchTuple to be considered a match.
type RegexMatchSet struct {

	// A friendly name or description of the RegexMatchSet. You can't change Name after
	// you create a RegexMatchSet.
	Name *string

	// The RegexMatchSetId for a RegexMatchSet. You use RegexMatchSetId to get
	// information about a RegexMatchSet (see GetRegexMatchSet), update a RegexMatchSet
	// (see UpdateRegexMatchSet), insert a RegexMatchSet into a Rule or delete one from
	// a Rule (see UpdateRule), and delete a RegexMatchSet from AWS WAF (see
	// DeleteRegexMatchSet). RegexMatchSetId is returned by CreateRegexMatchSet and by
	// ListRegexMatchSets.
	RegexMatchSetId *string

	// Contains an array of RegexMatchTuple objects. Each RegexMatchTuple object
	// contains:
	//
	// * The part of a web request that you want AWS WAF to inspect, such as
	// a query string or the value of the User-Agent header.
	//
	// * The identifier of the
	// pattern (a regular expression) that you want AWS WAF to look for. For more
	// information, see RegexPatternSet.
	//
	// * Whether to perform any conversions on the
	// request, such as converting it to lowercase, before inspecting it for the
	// specified string.
	RegexMatchTuples []RegexMatchTuple

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Returned by ListRegexMatchSets. Each RegexMatchSetSummary object
// includes the Name and RegexMatchSetId for one RegexMatchSet.
type RegexMatchSetSummary struct {

	// A friendly name or description of the RegexMatchSet. You can't change Name after
	// you create a RegexMatchSet.
	//
	// This member is required.
	Name *string

	// The RegexMatchSetId for a RegexMatchSet. You use RegexMatchSetId to get
	// information about a RegexMatchSet, update a RegexMatchSet, remove a
	// RegexMatchSet from a Rule, and delete a RegexMatchSet from AWS WAF.
	// RegexMatchSetId is returned by CreateRegexMatchSet and by ListRegexMatchSets.
	//
	// This member is required.
	RegexMatchSetId *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. In an UpdateRegexMatchSet request, RegexMatchSetUpdate specifies
// whether to insert or delete a RegexMatchTuple and includes the settings for the
// RegexMatchTuple.
type RegexMatchSetUpdate struct {

	// Specifies whether to insert or delete a RegexMatchTuple.
	//
	// This member is required.
	Action ChangeAction

	// Information about the part of a web request that you want AWS WAF to inspect and
	// the identifier of the regular expression (regex) pattern that you want AWS WAF
	// to search for. If you specify DELETE for the value of Action, the
	// RegexMatchTuple values must exactly match the values in the RegexMatchTuple that
	// you want to delete from the RegexMatchSet.
	//
	// This member is required.
	RegexMatchTuple *RegexMatchTuple

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. The regular expression pattern that you want AWS WAF to search for
// in web requests, the location in requests that you want AWS WAF to search, and
// other settings. Each RegexMatchTuple object contains:
//
// * The part of a web
// request that you want AWS WAF to inspect, such as a query string or the value of
// the User-Agent header.
//
// * The identifier of the pattern (a regular expression)
// that you want AWS WAF to look for. For more information, see RegexPatternSet.
//
// *
// Whether to perform any conversions on the request, such as converting it to
// lowercase, before inspecting it for the specified string.
type RegexMatchTuple struct {

	// Specifies where in a web request to look for the RegexPatternSet.
	//
	// This member is required.
	FieldToMatch *FieldToMatch

	// The RegexPatternSetId for a RegexPatternSet. You use RegexPatternSetId to get
	// information about a RegexPatternSet (see GetRegexPatternSet), update a
	// RegexPatternSet (see UpdateRegexPatternSet), insert a RegexPatternSet into a
	// RegexMatchSet or delete one from a RegexMatchSet (see UpdateRegexMatchSet), and
	// delete an RegexPatternSet from AWS WAF (see DeleteRegexPatternSet).
	// RegexPatternSetId is returned by CreateRegexPatternSet and by
	// ListRegexPatternSets.
	//
	// This member is required.
	RegexPatternSetId *string

	// Text transformations eliminate some of the unusual formatting that attackers use
	// in web requests in an effort to bypass AWS WAF. If you specify a transformation,
	// AWS WAF performs the transformation on RegexPatternSet before inspecting a
	// request for a match. You can only specify a single type of TextTransformation.
	// CMD_LINE When you're concerned that attackers are injecting an operating system
	// commandline command and using unusual formatting to disguise some or all of the
	// command, use this option to perform the following transformations:
	//
	// * Delete the
	// following characters: \ " ' ^
	//
	// * Delete spaces before the following characters:
	// / (
	//
	// * Replace the following characters with a space: , ;
	//
	// * Replace multiple
	// spaces with one space
	//
	// * Convert uppercase letters (A-Z) to lowercase
	// (a-z)
	//
	// COMPRESS_WHITE_SPACE Use this option to replace the following characters
	// with a space character (decimal 32):
	//
	// * \f, formfeed, decimal 12
	//
	// * \t, tab,
	// decimal 9
	//
	// * \n, newline, decimal 10
	//
	// * \r, carriage return, decimal 13
	//
	// * \v,
	// vertical tab, decimal 11
	//
	// * non-breaking space, decimal
	// 160
	//
	// COMPRESS_WHITE_SPACE also replaces multiple spaces with one space.
	// HTML_ENTITY_DECODE Use this option to replace HTML-encoded characters with
	// unencoded characters. HTML_ENTITY_DECODE performs the following operations:
	//
	// *
	// Replaces (ampersand)quot; with "
	//
	// * Replaces (ampersand)nbsp; with a
	// non-breaking space, decimal 160
	//
	// * Replaces (ampersand)lt; with a "less than"
	// symbol
	//
	// * Replaces (ampersand)gt; with >
	//
	// * Replaces characters that are
	// represented in hexadecimal format, (ampersand)#xhhhh;, with the corresponding
	// characters
	//
	// * Replaces characters that are represented in decimal format,
	// (ampersand)#nnnn;, with the corresponding characters
	//
	// LOWERCASE Use this option
	// to convert uppercase letters (A-Z) to lowercase (a-z). URL_DECODE Use this
	// option to decode a URL-encoded value. NONE Specify NONE if you don't want to
	// perform any text transformations.
	//
	// This member is required.
	TextTransformation TextTransformation

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. The RegexPatternSet specifies the regular expression (regex) pattern
// that you want AWS WAF to search for, such as B[a@]dB[o0]t. You can then
// configure AWS WAF to reject those requests.
type RegexPatternSet struct {

	// The identifier for the RegexPatternSet. You use RegexPatternSetId to get
	// information about a RegexPatternSet, update a RegexPatternSet, remove a
	// RegexPatternSet from a RegexMatchSet, and delete a RegexPatternSet from AWS WAF.
	// RegexMatchSetId is returned by CreateRegexPatternSet and by
	// ListRegexPatternSets.
	//
	// This member is required.
	RegexPatternSetId *string

	// Specifies the regular expression (regex) patterns that you want AWS WAF to
	// search for, such as B[a@]dB[o0]t.
	//
	// This member is required.
	RegexPatternStrings []string

	// A friendly name or description of the RegexPatternSet. You can't change Name
	// after you create a RegexPatternSet.
	Name *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Returned by ListRegexPatternSets. Each RegexPatternSetSummary object
// includes the Name and RegexPatternSetId for one RegexPatternSet.
type RegexPatternSetSummary struct {

	// A friendly name or description of the RegexPatternSet. You can't change Name
	// after you create a RegexPatternSet.
	//
	// This member is required.
	Name *string

	// The RegexPatternSetId for a RegexPatternSet. You use RegexPatternSetId to get
	// information about a RegexPatternSet, update a RegexPatternSet, remove a
	// RegexPatternSet from a RegexMatchSet, and delete a RegexPatternSet from AWS WAF.
	// RegexPatternSetId is returned by CreateRegexPatternSet and by
	// ListRegexPatternSets.
	//
	// This member is required.
	RegexPatternSetId *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. In an UpdateRegexPatternSet request, RegexPatternSetUpdate specifies
// whether to insert or delete a RegexPatternString and includes the settings for
// the RegexPatternString.
type RegexPatternSetUpdate struct {

	// Specifies whether to insert or delete a RegexPatternString.
	//
	// This member is required.
	Action ChangeAction

	// Specifies the regular expression (regex) pattern that you want AWS WAF to search
	// for, such as B[a@]dB[o0]t.
	//
	// This member is required.
	RegexPatternString *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. A combination of ByteMatchSet, IPSet, and/or SqlInjectionMatchSet
// objects that identify the web requests that you want to allow, block, or count.
// For example, you might create a Rule that includes the following predicates:
//
// *
// An IPSet that causes AWS WAF to search for web requests that originate from the
// IP address 192.0.2.44
//
// * A ByteMatchSet that causes AWS WAF to search for web
// requests for which the value of the User-Agent header is BadBot.
//
// To match the
// settings in this Rule, a request must originate from 192.0.2.44 AND include a
// User-Agent header for which the value is BadBot.
type Rule struct {

	// The Predicates object contains one Predicate element for each ByteMatchSet,
	// IPSet, or SqlInjectionMatchSet object that you want to include in a Rule.
	//
	// This member is required.
	Predicates []Predicate

	// A unique identifier for a Rule. You use RuleId to get more information about a
	// Rule (see GetRule), update a Rule (see UpdateRule), insert a Rule into a WebACL
	// or delete a one from a WebACL (see UpdateWebACL), or delete a Rule from AWS WAF
	// (see DeleteRule). RuleId is returned by CreateRule and by ListRules.
	//
	// This member is required.
	RuleId *string

	// A friendly name or description for the metrics for this Rule. The name can
	// contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128
	// and minimum length one. It can't contain whitespace or metric names reserved for
	// AWS WAF, including "All" and "Default_Action." You can't change MetricName after
	// you create the Rule.
	MetricName *string

	// The friendly name or description for the Rule. You can't change the name of a
	// Rule after you create it.
	Name *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. A collection of predefined rules that you can add to a web ACL. Rule
// groups are subject to the following limits:
//
// * Three rule groups per account.
// You can request an increase to this limit by contacting customer support.
//
// * One
// rule group per web ACL.
//
// * Ten rules per rule group.
type RuleGroup struct {

	// A unique identifier for a RuleGroup. You use RuleGroupId to get more information
	// about a RuleGroup (see GetRuleGroup), update a RuleGroup (see UpdateRuleGroup),
	// insert a RuleGroup into a WebACL or delete a one from a WebACL (see
	// UpdateWebACL), or delete a RuleGroup from AWS WAF (see DeleteRuleGroup).
	// RuleGroupId is returned by CreateRuleGroup and by ListRuleGroups.
	//
	// This member is required.
	RuleGroupId *string

	// A friendly name or description for the metrics for this RuleGroup. The name can
	// contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128
	// and minimum length one. It can't contain whitespace or metric names reserved for
	// AWS WAF, including "All" and "Default_Action." You can't change the name of the
	// metric after you create the RuleGroup.
	MetricName *string

	// The friendly name or description for the RuleGroup. You can't change the name of
	// a RuleGroup after you create it.
	Name *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Contains the identifier and the friendly name or description of the
// RuleGroup.
type RuleGroupSummary struct {

	// A friendly name or description of the RuleGroup. You can't change the name of a
	// RuleGroup after you create it.
	//
	// This member is required.
	Name *string

	// A unique identifier for a RuleGroup. You use RuleGroupId to get more information
	// about a RuleGroup (see GetRuleGroup), update a RuleGroup (see UpdateRuleGroup),
	// insert a RuleGroup into a WebACL or delete one from a WebACL (see UpdateWebACL),
	// or delete a RuleGroup from AWS WAF (see DeleteRuleGroup). RuleGroupId is
	// returned by CreateRuleGroup and by ListRuleGroups.
	//
	// This member is required.
	RuleGroupId *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Specifies an ActivatedRule and indicates whether you want to add it
// to a RuleGroup or delete it from a RuleGroup.
type RuleGroupUpdate struct {

	// Specify INSERT to add an ActivatedRule to a RuleGroup. Use DELETE to remove an
	// ActivatedRule from a RuleGroup.
	//
	// This member is required.
	Action ChangeAction

	// The ActivatedRule object specifies a Rule that you want to insert or delete, the
	// priority of the Rule in the WebACL, and the action that you want AWS WAF to take
	// when a web request matches the Rule (ALLOW, BLOCK, or COUNT).
	//
	// This member is required.
	ActivatedRule *ActivatedRule

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Contains the identifier and the friendly name or description of the
// Rule.
type RuleSummary struct {

	// A friendly name or description of the Rule. You can't change the name of a Rule
	// after you create it.
	//
	// This member is required.
	Name *string

	// A unique identifier for a Rule. You use RuleId to get more information about a
	// Rule (see GetRule), update a Rule (see UpdateRule), insert a Rule into a WebACL
	// or delete one from a WebACL (see UpdateWebACL), or delete a Rule from AWS WAF
	// (see DeleteRule). RuleId is returned by CreateRule and by ListRules.
	//
	// This member is required.
	RuleId *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Specifies a Predicate (such as an IPSet) and indicates whether you
// want to add it to a Rule or delete it from a Rule.
type RuleUpdate struct {

	// Specify INSERT to add a Predicate to a Rule. Use DELETE to remove a Predicate
	// from a Rule.
	//
	// This member is required.
	Action ChangeAction

	// The ID of the Predicate (such as an IPSet) that you want to add to a Rule.
	//
	// This member is required.
	Predicate *Predicate

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. The response from a GetSampledRequests request includes a
// SampledHTTPRequests complex type that appears as SampledRequests in the response
// syntax. SampledHTTPRequests contains one SampledHTTPRequest object for each web
// request that is returned by GetSampledRequests.
type SampledHTTPRequest struct {

	// A complex type that contains detailed information about the request.
	//
	// This member is required.
	Request *HTTPRequest

	// A value that indicates how one result in the response relates proportionally to
	// other results in the response. A result that has a weight of 2 represents
	// roughly twice as many CloudFront web requests as a result that has a weight of
	// 1.
	//
	// This member is required.
	Weight int64

	// The action for the Rule that the request matched: ALLOW, BLOCK, or COUNT.
	Action *string

	// This value is returned if the GetSampledRequests request specifies the ID of a
	// RuleGroup rather than the ID of an individual rule. RuleWithinRuleGroup is the
	// rule within the specified RuleGroup that matched the request listed in the
	// response.
	RuleWithinRuleGroup *string

	// The time at which AWS WAF received the request from your AWS resource, in Unix
	// time format (in seconds).
	Timestamp *time.Time

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Specifies a constraint on the size of a part of the web request. AWS
// WAF uses the Size, ComparisonOperator, and FieldToMatch to build an expression
// in the form of "SizeComparisonOperator size in bytes of FieldToMatch". If that
// expression is true, the SizeConstraint is considered to match.
type SizeConstraint struct {

	// The type of comparison you want AWS WAF to perform. AWS WAF uses this in
	// combination with the provided Size and FieldToMatch to build an expression in
	// the form of "SizeComparisonOperator size in bytes of FieldToMatch". If that
	// expression is true, the SizeConstraint is considered to match. EQ: Used to test
	// if the Size is equal to the size of the FieldToMatch NE: Used to test if the
	// Size is not equal to the size of the FieldToMatch LE: Used to test if the Size
	// is less than or equal to the size of the FieldToMatch LT: Used to test if the
	// Size is strictly less than the size of the FieldToMatch GE: Used to test if the
	// Size is greater than or equal to the size of the FieldToMatch GT: Used to test
	// if the Size is strictly greater than the size of the FieldToMatch
	//
	// This member is required.
	ComparisonOperator ComparisonOperator

	// Specifies where in a web request to look for the size constraint.
	//
	// This member is required.
	FieldToMatch *FieldToMatch

	// The size in bytes that you want AWS WAF to compare against the size of the
	// specified FieldToMatch. AWS WAF uses this in combination with ComparisonOperator
	// and FieldToMatch to build an expression in the form of "SizeComparisonOperator
	// size in bytes of FieldToMatch". If that expression is true, the SizeConstraint
	// is considered to match. Valid values for size are 0 - 21474836480 bytes (0 - 20
	// GB). If you specify URI for the value of Type, the / in the URI counts as one
	// character. For example, the URI /logo.jpg is nine characters long.
	//
	// This member is required.
	Size int64

	// Text transformations eliminate some of the unusual formatting that attackers use
	// in web requests in an effort to bypass AWS WAF. If you specify a transformation,
	// AWS WAF performs the transformation on FieldToMatch before inspecting it for a
	// match. You can only specify a single type of TextTransformation. Note that if
	// you choose BODY for the value of Type, you must choose NONE for
	// TextTransformation because CloudFront forwards only the first 8192 bytes for
	// inspection. NONE Specify NONE if you don't want to perform any text
	// transformations. CMD_LINE When you're concerned that attackers are injecting an
	// operating system command line command and using unusual formatting to disguise
	// some or all of the command, use this option to perform the following
	// transformations:
	//
	// * Delete the following characters: \ " ' ^
	//
	// * Delete spaces
	// before the following characters: / (
	//
	// * Replace the following characters with a
	// space: , ;
	//
	// * Replace multiple spaces with one space
	//
	// * Convert uppercase
	// letters (A-Z) to lowercase (a-z)
	//
	// COMPRESS_WHITE_SPACE Use this option to
	// replace the following characters with a space character (decimal 32):
	//
	// * \f,
	// formfeed, decimal 12
	//
	// * \t, tab, decimal 9
	//
	// * \n, newline, decimal 10
	//
	// * \r,
	// carriage return, decimal 13
	//
	// * \v, vertical tab, decimal 11
	//
	// * non-breaking
	// space, decimal 160
	//
	// COMPRESS_WHITE_SPACE also replaces multiple spaces with one
	// space. HTML_ENTITY_DECODE Use this option to replace HTML-encoded characters
	// with unencoded characters. HTML_ENTITY_DECODE performs the following
	// operations:
	//
	// * Replaces (ampersand)quot; with "
	//
	// * Replaces (ampersand)nbsp;
	// with a non-breaking space, decimal 160
	//
	// * Replaces (ampersand)lt; with a "less
	// than" symbol
	//
	// * Replaces (ampersand)gt; with >
	//
	// * Replaces characters that are
	// represented in hexadecimal format, (ampersand)#xhhhh;, with the corresponding
	// characters
	//
	// * Replaces characters that are represented in decimal format,
	// (ampersand)#nnnn;, with the corresponding characters
	//
	// LOWERCASE Use this option
	// to convert uppercase letters (A-Z) to lowercase (a-z). URL_DECODE Use this
	// option to decode a URL-encoded value.
	//
	// This member is required.
	TextTransformation TextTransformation

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. A complex type that contains SizeConstraint objects, which specify
// the parts of web requests that you want AWS WAF to inspect the size of. If a
// SizeConstraintSet contains more than one SizeConstraint object, a request only
// needs to match one constraint to be considered a match.
type SizeConstraintSet struct {

	// A unique identifier for a SizeConstraintSet. You use SizeConstraintSetId to get
	// information about a SizeConstraintSet (see GetSizeConstraintSet), update a
	// SizeConstraintSet (see UpdateSizeConstraintSet), insert a SizeConstraintSet into
	// a Rule or delete one from a Rule (see UpdateRule), and delete a
	// SizeConstraintSet from AWS WAF (see DeleteSizeConstraintSet).
	// SizeConstraintSetId is returned by CreateSizeConstraintSet and by
	// ListSizeConstraintSets.
	//
	// This member is required.
	SizeConstraintSetId *string

	// Specifies the parts of web requests that you want to inspect the size of.
	//
	// This member is required.
	SizeConstraints []SizeConstraint

	// The name, if any, of the SizeConstraintSet.
	Name *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. The Id and Name of a SizeConstraintSet.
type SizeConstraintSetSummary struct {

	// The name of the SizeConstraintSet, if any.
	//
	// This member is required.
	Name *string

	// A unique identifier for a SizeConstraintSet. You use SizeConstraintSetId to get
	// information about a SizeConstraintSet (see GetSizeConstraintSet), update a
	// SizeConstraintSet (see UpdateSizeConstraintSet), insert a SizeConstraintSet into
	// a Rule or delete one from a Rule (see UpdateRule), and delete a
	// SizeConstraintSet from AWS WAF (see DeleteSizeConstraintSet).
	// SizeConstraintSetId is returned by CreateSizeConstraintSet and by
	// ListSizeConstraintSets.
	//
	// This member is required.
	SizeConstraintSetId *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Specifies the part of a web request that you want to inspect the
// size of and indicates whether you want to add the specification to a
// SizeConstraintSet or delete it from a SizeConstraintSet.
type SizeConstraintSetUpdate struct {

	// Specify INSERT to add a SizeConstraintSetUpdate to a SizeConstraintSet. Use
	// DELETE to remove a SizeConstraintSetUpdate from a SizeConstraintSet.
	//
	// This member is required.
	Action ChangeAction

	// Specifies a constraint on the size of a part of the web request. AWS WAF uses
	// the Size, ComparisonOperator, and FieldToMatch to build an expression in the
	// form of "SizeComparisonOperator size in bytes of FieldToMatch". If that
	// expression is true, the SizeConstraint is considered to match.
	//
	// This member is required.
	SizeConstraint *SizeConstraint

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. A complex type that contains SqlInjectionMatchTuple objects, which
// specify the parts of web requests that you want AWS WAF to inspect for snippets
// of malicious SQL code and, if you want AWS WAF to inspect a header, the name of
// the header. If a SqlInjectionMatchSet contains more than one
// SqlInjectionMatchTuple object, a request needs to include snippets of SQL code
// in only one of the specified parts of the request to be considered a match.
type SqlInjectionMatchSet struct {

	// A unique identifier for a SqlInjectionMatchSet. You use SqlInjectionMatchSetId
	// to get information about a SqlInjectionMatchSet (see GetSqlInjectionMatchSet),
	// update a SqlInjectionMatchSet (see UpdateSqlInjectionMatchSet), insert a
	// SqlInjectionMatchSet into a Rule or delete one from a Rule (see UpdateRule), and
	// delete a SqlInjectionMatchSet from AWS WAF (see DeleteSqlInjectionMatchSet).
	// SqlInjectionMatchSetId is returned by CreateSqlInjectionMatchSet and by
	// ListSqlInjectionMatchSets.
	//
	// This member is required.
	SqlInjectionMatchSetId *string

	// Specifies the parts of web requests that you want to inspect for snippets of
	// malicious SQL code.
	//
	// This member is required.
	SqlInjectionMatchTuples []SqlInjectionMatchTuple

	// The name, if any, of the SqlInjectionMatchSet.
	Name *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. The Id and Name of a SqlInjectionMatchSet.
type SqlInjectionMatchSetSummary struct {

	// The name of the SqlInjectionMatchSet, if any, specified by Id.
	//
	// This member is required.
	Name *string

	// A unique identifier for a SqlInjectionMatchSet. You use SqlInjectionMatchSetId
	// to get information about a SqlInjectionMatchSet (see GetSqlInjectionMatchSet),
	// update a SqlInjectionMatchSet (see UpdateSqlInjectionMatchSet), insert a
	// SqlInjectionMatchSet into a Rule or delete one from a Rule (see UpdateRule), and
	// delete a SqlInjectionMatchSet from AWS WAF (see DeleteSqlInjectionMatchSet).
	// SqlInjectionMatchSetId is returned by CreateSqlInjectionMatchSet and by
	// ListSqlInjectionMatchSets.
	//
	// This member is required.
	SqlInjectionMatchSetId *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Specifies the part of a web request that you want to inspect for
// snippets of malicious SQL code and indicates whether you want to add the
// specification to a SqlInjectionMatchSet or delete it from a
// SqlInjectionMatchSet.
type SqlInjectionMatchSetUpdate struct {

	// Specify INSERT to add a SqlInjectionMatchSetUpdate to a SqlInjectionMatchSet.
	// Use DELETE to remove a SqlInjectionMatchSetUpdate from a SqlInjectionMatchSet.
	//
	// This member is required.
	Action ChangeAction

	// Specifies the part of a web request that you want AWS WAF to inspect for
	// snippets of malicious SQL code and, if you want AWS WAF to inspect a header, the
	// name of the header.
	//
	// This member is required.
	SqlInjectionMatchTuple *SqlInjectionMatchTuple

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Specifies the part of a web request that you want AWS WAF to inspect
// for snippets of malicious SQL code and, if you want AWS WAF to inspect a header,
// the name of the header.
type SqlInjectionMatchTuple struct {

	// Specifies where in a web request to look for snippets of malicious SQL code.
	//
	// This member is required.
	FieldToMatch *FieldToMatch

	// Text transformations eliminate some of the unusual formatting that attackers use
	// in web requests in an effort to bypass AWS WAF. If you specify a transformation,
	// AWS WAF performs the transformation on FieldToMatch before inspecting it for a
	// match. You can only specify a single type of TextTransformation. CMD_LINE When
	// you're concerned that attackers are injecting an operating system command line
	// command and using unusual formatting to disguise some or all of the command, use
	// this option to perform the following transformations:
	//
	// * Delete the following
	// characters: \ " ' ^
	//
	// * Delete spaces before the following characters: / (
	//
	// *
	// Replace the following characters with a space: , ;
	//
	// * Replace multiple spaces
	// with one space
	//
	// * Convert uppercase letters (A-Z) to lowercase
	// (a-z)
	//
	// COMPRESS_WHITE_SPACE Use this option to replace the following characters
	// with a space character (decimal 32):
	//
	// * \f, formfeed, decimal 12
	//
	// * \t, tab,
	// decimal 9
	//
	// * \n, newline, decimal 10
	//
	// * \r, carriage return, decimal 13
	//
	// * \v,
	// vertical tab, decimal 11
	//
	// * non-breaking space, decimal
	// 160
	//
	// COMPRESS_WHITE_SPACE also replaces multiple spaces with one space.
	// HTML_ENTITY_DECODE Use this option to replace HTML-encoded characters with
	// unencoded characters. HTML_ENTITY_DECODE performs the following operations:
	//
	// *
	// Replaces (ampersand)quot; with "
	//
	// * Replaces (ampersand)nbsp; with a
	// non-breaking space, decimal 160
	//
	// * Replaces (ampersand)lt; with a "less than"
	// symbol
	//
	// * Replaces (ampersand)gt; with >
	//
	// * Replaces characters that are
	// represented in hexadecimal format, (ampersand)#xhhhh;, with the corresponding
	// characters
	//
	// * Replaces characters that are represented in decimal format,
	// (ampersand)#nnnn;, with the corresponding characters
	//
	// LOWERCASE Use this option
	// to convert uppercase letters (A-Z) to lowercase (a-z). URL_DECODE Use this
	// option to decode a URL-encoded value. NONE Specify NONE if you don't want to
	// perform any text transformations.
	//
	// This member is required.
	TextTransformation TextTransformation

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. A summary of the rule groups you are subscribed to.
type SubscribedRuleGroupSummary struct {

	// A friendly name or description for the metrics for this RuleGroup. The name can
	// contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128
	// and minimum length one. It can't contain whitespace or metric names reserved for
	// AWS WAF, including "All" and "Default_Action." You can't change the name of the
	// metric after you create the RuleGroup.
	//
	// This member is required.
	MetricName *string

	// A friendly name or description of the RuleGroup. You can't change the name of a
	// RuleGroup after you create it.
	//
	// This member is required.
	Name *string

	// A unique identifier for a RuleGroup.
	//
	// This member is required.
	RuleGroupId *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. A tag associated with an AWS resource. Tags are key:value pairs that
// you can use to categorize and manage your resources, for purposes like billing.
// For example, you might set the tag key to "customer" and the value to the
// customer name or ID. You can specify one or more tags to add to each AWS
// resource, up to 50 tags for a resource. Tagging is only available through the
// API, SDKs, and CLI. You can't manage or view tags through the AWS WAF Classic
// console. You can tag the AWS resources that you manage through AWS WAF Classic:
// web ACLs, rule groups, and rules.
type Tag struct {

	//
	//
	// This member is required.
	Key *string

	//
	//
	// This member is required.
	Value *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Information for a tag associated with an AWS resource. Tags are
// key:value pairs that you can use to categorize and manage your resources, for
// purposes like billing. For example, you might set the tag key to "customer" and
// the value to the customer name or ID. You can specify one or more tags to add to
// each AWS resource, up to 50 tags for a resource. Tagging is only available
// through the API, SDKs, and CLI. You can't manage or view tags through the AWS
// WAF Classic console. You can tag the AWS resources that you manage through AWS
// WAF Classic: web ACLs, rule groups, and rules.
type TagInfoForResource struct {

	//
	ResourceARN *string

	//
	TagList []Tag

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. In a GetSampledRequests request, the StartTime and EndTime objects
// specify the time range for which you want AWS WAF to return a sample of web
// requests. You must specify the times in Coordinated Universal Time (UTC) format.
// UTC format includes the special designator, Z. For example, "2016-09-27T14:50Z".
// In a GetSampledRequests response, the StartTime and EndTime objects specify the
// time range for which AWS WAF actually returned a sample of web requests. AWS WAF
// gets the specified number of requests from among the first 5,000 requests that
// your AWS resource receives during the specified time period. If your resource
// receives more than 5,000 requests during that period, AWS WAF stops sampling
// after the 5,000th request. In that case, EndTime is the time that AWS WAF
// received the 5,000th request.
type TimeWindow struct {

	// The end of the time range from which you want GetSampledRequests to return a
	// sample of the requests that your AWS resource received. You must specify the
	// date and time in Coordinated Universal Time (UTC) format. UTC format includes
	// the special designator, Z. For example, "2016-09-27T14:50Z". You can specify any
	// time range in the previous three hours.
	//
	// This member is required.
	EndTime *time.Time

	// The beginning of the time range from which you want GetSampledRequests to return
	// a sample of the requests that your AWS resource received. You must specify the
	// date and time in Coordinated Universal Time (UTC) format. UTC format includes
	// the special designator, Z. For example, "2016-09-27T14:50Z". You can specify any
	// time range in the previous three hours.
	//
	// This member is required.
	StartTime *time.Time

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. For the action that is associated with a rule in a WebACL, specifies
// the action that you want AWS WAF to perform when a web request matches all of
// the conditions in a rule. For the default action in a WebACL, specifies the
// action that you want AWS WAF to take when a web request doesn't match all of the
// conditions in any of the rules in a WebACL.
type WafAction struct {

	// Specifies how you want AWS WAF to respond to requests that match the settings in
	// a Rule. Valid settings include the following:
	//
	// * ALLOW: AWS WAF allows
	// requests
	//
	// * BLOCK: AWS WAF blocks requests
	//
	// * COUNT: AWS WAF increments a
	// counter of the requests that match all of the conditions in the rule. AWS WAF
	// then continues to inspect the web request based on the remaining rules in the
	// web ACL. You can't specify COUNT for the default action for a WebACL.
	//
	// This member is required.
	Type WafActionType

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. The action to take if any rule within the RuleGroup matches a
// request.
type WafOverrideAction struct {

	// COUNT overrides the action specified by the individual rule within a RuleGroup .
	// If set to NONE, the rule's action will take place.
	//
	// This member is required.
	Type WafOverrideActionType

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Contains the Rules that identify the requests that you want to
// allow, block, or count. In a WebACL, you also specify a default action (ALLOW or
// BLOCK), and the action for each Rule that you add to a WebACL, for example,
// block requests from specified IP addresses or block requests from specified
// referrers. You also associate the WebACL with a CloudFront distribution to
// identify the requests that you want AWS WAF to filter. If you add more than one
// Rule to a WebACL, a request needs to match only one of the specifications to be
// allowed, blocked, or counted. For more information, see UpdateWebACL.
type WebACL struct {

	// The action to perform if none of the Rules contained in the WebACL match. The
	// action is specified by the WafAction object.
	//
	// This member is required.
	DefaultAction *WafAction

	// An array that contains the action for each Rule in a WebACL, the priority of the
	// Rule, and the ID of the Rule.
	//
	// This member is required.
	Rules []ActivatedRule

	// A unique identifier for a WebACL. You use WebACLId to get information about a
	// WebACL (see GetWebACL), update a WebACL (see UpdateWebACL), and delete a WebACL
	// from AWS WAF (see DeleteWebACL). WebACLId is returned by CreateWebACL and by
	// ListWebACLs.
	//
	// This member is required.
	WebACLId *string

	// A friendly name or description for the metrics for this WebACL. The name can
	// contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128
	// and minimum length one. It can't contain whitespace or metric names reserved for
	// AWS WAF, including "All" and "Default_Action." You can't change MetricName after
	// you create the WebACL.
	MetricName *string

	// A friendly name or description of the WebACL. You can't change the name of a
	// WebACL after you create it.
	Name *string

	// Tha Amazon Resource Name (ARN) of the web ACL.
	WebACLArn *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Contains the identifier and the name or description of the WebACL.
type WebACLSummary struct {

	// A friendly name or description of the WebACL. You can't change the name of a
	// WebACL after you create it.
	//
	// This member is required.
	Name *string

	// A unique identifier for a WebACL. You use WebACLId to get information about a
	// WebACL (see GetWebACL), update a WebACL (see UpdateWebACL), and delete a WebACL
	// from AWS WAF (see DeleteWebACL). WebACLId is returned by CreateWebACL and by
	// ListWebACLs.
	//
	// This member is required.
	WebACLId *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Specifies whether to insert a Rule into or delete a Rule from a
// WebACL.
type WebACLUpdate struct {

	// Specifies whether to insert a Rule into or delete a Rule from a WebACL.
	//
	// This member is required.
	Action ChangeAction

	// The ActivatedRule object in an UpdateWebACL request specifies a Rule that you
	// want to insert or delete, the priority of the Rule in the WebACL, and the action
	// that you want AWS WAF to take when a web request matches the Rule (ALLOW, BLOCK,
	// or COUNT).
	//
	// This member is required.
	ActivatedRule *ActivatedRule

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. A complex type that contains XssMatchTuple objects, which specify
// the parts of web requests that you want AWS WAF to inspect for cross-site
// scripting attacks and, if you want AWS WAF to inspect a header, the name of the
// header. If a XssMatchSet contains more than one XssMatchTuple object, a request
// needs to include cross-site scripting attacks in only one of the specified parts
// of the request to be considered a match.
type XssMatchSet struct {

	// A unique identifier for an XssMatchSet. You use XssMatchSetId to get information
	// about an XssMatchSet (see GetXssMatchSet), update an XssMatchSet (see
	// UpdateXssMatchSet), insert an XssMatchSet into a Rule or delete one from a Rule
	// (see UpdateRule), and delete an XssMatchSet from AWS WAF (see
	// DeleteXssMatchSet). XssMatchSetId is returned by CreateXssMatchSet and by
	// ListXssMatchSets.
	//
	// This member is required.
	XssMatchSetId *string

	// Specifies the parts of web requests that you want to inspect for cross-site
	// scripting attacks.
	//
	// This member is required.
	XssMatchTuples []XssMatchTuple

	// The name, if any, of the XssMatchSet.
	Name *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. The Id and Name of an XssMatchSet.
type XssMatchSetSummary struct {

	// The name of the XssMatchSet, if any, specified by Id.
	//
	// This member is required.
	Name *string

	// A unique identifier for an XssMatchSet. You use XssMatchSetId to get information
	// about a XssMatchSet (see GetXssMatchSet), update an XssMatchSet (see
	// UpdateXssMatchSet), insert an XssMatchSet into a Rule or delete one from a Rule
	// (see UpdateRule), and delete an XssMatchSet from AWS WAF (see
	// DeleteXssMatchSet). XssMatchSetId is returned by CreateXssMatchSet and by
	// ListXssMatchSets.
	//
	// This member is required.
	XssMatchSetId *string

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Specifies the part of a web request that you want to inspect for
// cross-site scripting attacks and indicates whether you want to add the
// specification to an XssMatchSet or delete it from an XssMatchSet.
type XssMatchSetUpdate struct {

	// Specify INSERT to add an XssMatchSetUpdate to an XssMatchSet. Use DELETE to
	// remove an XssMatchSetUpdate from an XssMatchSet.
	//
	// This member is required.
	Action ChangeAction

	// Specifies the part of a web request that you want AWS WAF to inspect for
	// cross-site scripting attacks and, if you want AWS WAF to inspect a header, the
	// name of the header.
	//
	// This member is required.
	XssMatchTuple *XssMatchTuple

	noSmithyDocumentSerde
}

// This is AWS WAF Classic documentation. For more information, see AWS WAF Classic
// (https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html)
// in the developer guide. For the latest version of AWS WAF, use the AWS WAFV2 API
// and see the AWS WAF Developer Guide
// (https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html). With
// the latest version, AWS WAF has a single set of endpoints for regional and
// global use. Specifies the part of a web request that you want AWS WAF to inspect
// for cross-site scripting attacks and, if you want AWS WAF to inspect a header,
// the name of the header.
type XssMatchTuple struct {

	// Specifies where in a web request to look for cross-site scripting attacks.
	//
	// This member is required.
	FieldToMatch *FieldToMatch

	// Text transformations eliminate some of the unusual formatting that attackers use
	// in web requests in an effort to bypass AWS WAF. If you specify a transformation,
	// AWS WAF performs the transformation on FieldToMatch before inspecting it for a
	// match. You can only specify a single type of TextTransformation. CMD_LINE When
	// you're concerned that attackers are injecting an operating system command line
	// command and using unusual formatting to disguise some or all of the command, use
	// this option to perform the following transformations:
	//
	// * Delete the following
	// characters: \ " ' ^
	//
	// * Delete spaces before the following characters: / (
	//
	// *
	// Replace the following characters with a space: , ;
	//
	// * Replace multiple spaces
	// with one space
	//
	// * Convert uppercase letters (A-Z) to lowercase
	// (a-z)
	//
	// COMPRESS_WHITE_SPACE Use this option to replace the following characters
	// with a space character (decimal 32):
	//
	// * \f, formfeed, decimal 12
	//
	// * \t, tab,
	// decimal 9
	//
	// * \n, newline, decimal 10
	//
	// * \r, carriage return, decimal 13
	//
	// * \v,
	// vertical tab, decimal 11
	//
	// * non-breaking space, decimal
	// 160
	//
	// COMPRESS_WHITE_SPACE also replaces multiple spaces with one space.
	// HTML_ENTITY_DECODE Use this option to replace HTML-encoded characters with
	// unencoded characters. HTML_ENTITY_DECODE performs the following operations:
	//
	// *
	// Replaces (ampersand)quot; with "
	//
	// * Replaces (ampersand)nbsp; with a
	// non-breaking space, decimal 160
	//
	// * Replaces (ampersand)lt; with a "less than"
	// symbol
	//
	// * Replaces (ampersand)gt; with >
	//
	// * Replaces characters that are
	// represented in hexadecimal format, (ampersand)#xhhhh;, with the corresponding
	// characters
	//
	// * Replaces characters that are represented in decimal format,
	// (ampersand)#nnnn;, with the corresponding characters
	//
	// LOWERCASE Use this option
	// to convert uppercase letters (A-Z) to lowercase (a-z). URL_DECODE Use this
	// option to decode a URL-encoded value. NONE Specify NONE if you don't want to
	// perform any text transformations.
	//
	// This member is required.
	TextTransformation TextTransformation

	noSmithyDocumentSerde
}

type noSmithyDocumentSerde = smithydocument.NoSerde