https://aka.ms/hpcdiag redirects to this repo.

OS	Versions / Build	VM Size Family
Linux		ND	NC	HBv2	HB	HC	H
Ubuntu	18.04	NDv2	NCv2	HBv2		HC44
Ubuntu	16.04	NDv1	NCv1				H
CentOS	8.1	NDv2		HBv2	HB
CentOS	7.8		NCv3			HC
CentOS	7.7	NDv2			HB
CentOS	7.6	NDv1	NCv2	HBv2
CentOS	7.4		NCv1			HC	H
RHEL	8.2		NCv3			HC
RHEL	8.1		NCv2				H
RHEL	7.8	NDv2		HBv2
RHEL	7.7		NCv2		HB
RHEL	7.6	NDv2				HC
RHEL	7.5		NCv1				H
RHEL	7.4	NDv1		HBv2

Overview

This repo holds a script that, when run on an Azure VM, gathers a variety of diagnostic information for the purposes of diagnosing common HPC, Infiniband, and GPU problems. It runs a suite of diagnostic tools ranging from built-in Linux tools like lscpu to vendor-specific CLI's like nvidia-smi. The resulting information is packaged up into a tarball, so that it can be shared with support engineers to speed up the troubleshooting process.

If you are reading this, you are likely troubleshooting problems on an Azure HPC VM, in which case we suggest you contact support if you have not already and run this tool on your VM so that you can provide the output to support engineers when prompted.

If you have special privacy requirements concerning logs leaving your VM, make sure to open up the tarball and redact any sensitive information before re-tarring it and handing it off to support engineers.

Warning

This tool is meant for diagnosing inactive systems. It runs benchmarks that stress various system devices such as memory, GPU, and Infiniband. It will cause performance degradation for or otherwise interfere with other active processes that use these resources. It is not advised to use this tool on systems where other jobs are currenlty running.

To stop the tool while it is running, interrupt the process (i.e. ctrl-c) to force it to reset system state and terminate.

Install and Run

After cloning this repo, no further installation is required. To run the script, run the following command, replacing {repo-root} with the name of this repo's directory on your VM:

sudo bash {repo-root}/Linux/src/gather_azhpc_vm_diagnostics.sh

PerfInsights for Linux Integration

Alternatively, a version of this tool is included in PerfInsights for Linux under the HPC scenario. Running this scenario directly from the Azure Portal is not supported at this time, so PerfInsights must be downloaded and run from the command line, but the results of this tool are included in the report generated.

Usage

This section describes the output of the script and the configuration options available.

Options

Option (Short)	Option (Long)	Parameters	Description	Example	Example Description
-d	--dir	Directory Name	Specify custom output location	--dir=.	Put the tarball in the current directory
-V	--version		display version information and exit	--version	Outputs 0.0.1
-h	--help		display help text	-h	Outputs the help message
-v	--verbose		verbose output	--verbose	Enables more verbose terminal output
	--gpu-level	1 (default), 2, or 3	GPU diagnostics run-level	--gpu-level=3	Sets dcgmi run-level to 3
	--mem-level	0 (default) or 1	Memory diagnostics run-level	--mem-level=1	Enables stream benchmark test
	--no-update		Disables auto-update	--no-update	Refrains from checking for updates to the script
	--offline		Prevents internet access	--offline	Skips stream benchmark and lsvmbus if not installed

Tarball Structure

Note that not all these files will be generated on all runs. What appears below is union of all files that could be generated, which depends on script parameters and VM size:

{vm-id}.{timestamp}.tar.gz
|-- transcript.log (logs for the tool itself)
|-- hpcdiag.err (stderr output from the run, including set -x trace)
|-- VM
|   -- dmesg.log
|   -- waagent.log
|   -- lspci.txt
|   -- lsvmbus.log
|   -- ipconfig.txt
|   -- sysctl.txt
|   -- uname.txt
|   -- dmidecode.txt
|   -- lsmod.txt
|   -- journald.log|syslog|messages
|   -- services
|   -- selinux
|   -- hyperv/kvp_pool*.txt
|-- CPU
|   -- lscpu.txt
|   -- ulimit
|   -- zone_reclaim_mode
|-- Memory
|   -- stream.txt
|-- Infiniband
|   -- ib-vmext.log
|   -- ibstat.out
|   -- ibstatus.out
|   -- ibv_devinfo.out
|   -- pkeys/*
|   -- ethtool.out (ENDURE)
|   -- rate (ENDURE)
|   -- state (ENDURE)
|   -- phys_state (ENDURE)
|-- Nvidia
    -- nvidia-bug-report.log.gz
    -- nvidia-installer.log
    -- nvidia-vmext.log
    -- nvidia-smi.out
    -- nvidia-smi-q.out
    -- nvidia-smi-nvlink.out
    -- nvidia-debugdump.zip (only Nvidia can read)
    -- dcgm-diag-2.log
    -- dcgm-diag-3.log
    -- nvvs.log
    -- stats_*.json

Diagnostic Tools Table

Tool	Command	Output File(s)	Description	EULA
dmesg	dmesg	VM/dmesg.log	Dump of kernel ring buffer
rsyslog	cp syslog|messages	VM/syslog|messages	Dump of system log
journald	journalctl	VM/journald.log	Dump of system log
Azure IMDS	curl http://169.254.169.254/metadata/...	transcript.log	VM Metadata (ID,Region,OS Image, etc)
Azure VM Agent	cp /var/log/waagent.log	waagent.log	Logs from the Azure VM Agent
lspci	lspci	VM/lspci.txt	Info on installed PCI devices
lsvmbus	lsvmbus	VM/lsvmbus.log	Displays devices attached to the Hyper-V VMBus
Hyper-V KVP	custom-made	VM/hyperv/kvp_pool*.txt	Exposes certain Windows Registry data from the Azure Host
ipconfig	ipconfig	VM/ipconfig.txt	Checking TCP/IP configuration
sysctl	sysctl	VM/sysctl.txt	Checking kernel parameters
uname	uname	VM/uname.txt	Checking system information
systemd	systemctl	VM/services	Checking for certain active services (tuning only)
selinux	cp /etc/sysconfig/selinux	VM/selinux	Checking for selinux activity (tuning only)
ulimit	cp /etc/security/limits.conf	Memory/ulimit	Checking for default user resource limits (tuning only)
-	cp /proc/sys/vm/zone_reclaim_mode	Memory/zone_reclaim_mode	Checking NUMA memory reclamation policy (tuning only)
dmidecode	dmidecode	VM/dmidecode.txt	DMI table dump (info on hardware components)
lsmod	lsmod	VM/lsmod.txt	List of active kernel modules
lscpu	lscpu	CPU/lscpu.txt	Information about the system CPU architecture
stream	stream_zen_double	Memory/stream.txt	The stream benchmark suite (AMD Only)	Stream License
ibstat	ibstat	Infiniband/ibstat.out	Mellanox OFED command for checking Infiniband status	MOFED End-User Agreement
ibstatus	ibstatus	Infiniband/ibstat.out	Lightweight Mellanox OFED command for checking Infiniband status	MOFED End-User Agreement
ibv_devinfo	ibv_devinfo	Infiniband/ibv_devinfo.out	Mellanox OFED commnd for checking Infiniband Device info	MOFED End-User Agreement
Partition Key	cp /sys/class/infiniband/.../pkeys/...	Infiniband/.../pkeys/...	Checks the configured Infinband Partition Keys
Infiniband Driver Extension Logs	cp /var/log/azure/ib-vmext-status	Infiniband/ib-vmext-status	Logs from the Infiniband Driver Extension
ethtool	ethtool eth1	Infiniband/ethtool.out	Status of IB interface on ENDURE VMs
sysfs	cp /sys/class/infiniband/...	Infiniband/rate,state,phys_state	Status of IB interface on ENDURE VMs
NVIDIA Bug Report	nvidia-bug-report.sh	Nvidia/nvidia-bug-report.log.gz	A script that Nvidia has customers run when reporting hardware problems.	CUDA EULA GRID EULA
NVIDIA System Management Interface	nvidia-smi	Nvidia/nvidia-smi.out Nvidia/nvidia-smi-q.out Nvidia/nvidia-smi-nvlink.out	Checks GPU health and configuration	CUDA EULA GRID EULA
NVIDIA Debug Dump	nvidia-debugbump	Nvidia/nvidia-debugdump.zip	Generates a binary blob for use with Nvidia internal engineering tools	CUDA EULA GRID EULA
NVIDIA Data Center GPU Manager	dcgmi	Nvidia/dcgm-diag-2.log Nvidia/dcgm-diag-3.log Nvidia/nvvs.log Nvidia/stats_*.json	Health monitoring for GPUs in cluster environments	DCGM EULA
GPU Driver Extension Logs	cp /var/log/azure/nvidia-vmext-status	Nvidia/nvidia-vmext-status	Logs from the GPU Driver Extension

Contributing

This project welcomes contributions and suggestions. Most contributions require you to agree to a Contributor License Agreement (CLA) declaring that you have the right to, and actually do, grant us the rights to use your contribution. For details, visit https://cla.opensource.microsoft.com.

When you submit a pull request, a CLA bot will automatically determine whether you need to provide a CLA and decorate the PR appropriately (e.g., status check, comment). Simply follow the instructions provided by the bot. You will only need to do this once across all repos using our CLA.

This project has adopted the Microsoft Open Source Code of Conduct. For more information see the Code of Conduct FAQ or contact opencode@microsoft.com with any additional questions or comments.