Cannot run set-vars.sh in recovery!

[josef6322]

Basically everything works smoothly until i step 6 and i'm stuck there.. I'm using MBP Early 2013

[ghost]

What error does set-vars.sh result in?

[josef6322]

it says no such file or directory

[ghost]

Are you running /Volumes/Image\ Volume/set-vars.sh or just set-vars.sh?

[josef6322]

no with file path and everything, I tried al kind of possible commands same error

[josef6322]

I think it it's not mounting the part of the volume where the sh is, which is strange to. me, because its in the root directory basically

[ghost]

Run ls /Volumes

[josef6322]

how do you mean?

[josef6322]

so now I tried woth out any quotes and it loaded

[ghost]

In the terminal run ls /Volumes (or cd /Volumes && ls).

It shows all the currently mounted volumes. Image Volume should be one of them.

If it's not then write all the drives listed into the comments, otherwise I have something else I would like you to do. (Both should help find the error.)

[josef6322]

Thanks for your help. i will update on the progress 😊👍

[barrykn]

Use quotes or backslashes, but not both.

At some point in the near future I'll use ParrotGeek's installer trampoline trick (or something like it) to automate step 6.

[josef6322]

i ran this:

/Volumes/Image\ Volume/set-vars.sh

and it loaded, which I previously tried and did not run 😕

[josef6322]

Guys I'm now stuck in step 10

[josef6322]

same problem, im doing this..

[titovic]

Ensure the proper placement of the '\' ... it should be before the space. Try:
/Volumes/Image\ Volume/patch-kexts.sh /Volumes/BIG\ Sur

[josef6322]

Now im getting this...

[josef6322]

Ok, Correction.. so i managed to install the kexts.. but WiFi is still not working, it can find that it has WiFi now yes but still not SSIDs found

[barrykn]

When I get a chance I need to see if I can do something to make the WiFi patch more stable. (That's basically issue #5.)

[josef6322]

Thanks ☺️

[josef6322]

I don't know how.. but after i rebooted again now its working?? oh god lol

[josef6322]

Hi again 😊, do you know how i can get a hold of the public beta? somhow i am. not getting the updates from the software update 😒

[ghost]

Sadly, updating is not as simple as it was when these Macs were still supported. You have to go through the whole install process again (createinstallmedia, micropatcher.sh, Upgrade MacOS, patch-kexts.sh).

This would be the same regardless if you use the public or developer beta (as far as I know).

But...
Public Beta 1 (20A5343j)

[josef6322]

yes o know about that 😊 i got the hang of it apparently 😂

[barrykn]

I don't see anything in this issue that needs to be resolved, and it has been dormant for over a month, so I will close it now. Reopen it if I am mistaken about this.