- install.md
- Install Beluganos and related OSS automatically
After installing (install.md), you can check our use case to try Beluganos.
- case1.md
- Recommendation for beginner
- IGP router with MPLS
- Create automatically not only Beluganos but also environment router
- case2.md
- MPLS-VPN PE router with 2 VRF
- Real white-box swithes and environment routers are required to try
After installing (install.md), you may set up about hardware.
- setup.md
- Beluganos setup to connect with white-box switch
- setup-hardware.md
- Hardware setup
- setup-opennetworklinux.md
- Installation about OpenNetworkLinux
- setup-onsl.md
- OpenNetworkLinux setup to use OpenNSL
- setup-ofdpa.md
- OpenNetworkLinux setup to use OF-DPA
After installing (install.md), you can configure Beluganos as you like.
- configure.md
- Configuration guide of Linux style.
- configure-ansible.md
- Configuration guide of IP/MPLS router by ansible.
- configure-netconf.md
- Configuration guide of router by NETCONF.
- configure-portmapping.md
- Interface mapping information between physical and logical port. This information is required at configuration.
- operation.md
- How to start/stop Beluganos
- How to login routing engine's console
- netconf/etc/openconfig
- Yang files of Beluganos
- netconf/doc/examples
- The examples of XML for NETCONF
<edit-config>
- The examples of XML for NETCONF
- netconf/doc/setup-guide
- Initial settings about network-instance modules
- feature-l3vpn.md
- Configuration guide of MPLS-VPN PE router by ansible.
- feature-l2switching.md
- Configuration guide of L2 switching feature
- feature-iptunnel.md
- Configuration guide of IPIP tunneling feature
- feature-snmp.md
- SNMP feature guide (MIB, trap)
- feature-syslog.md
- Syslog feature guide
- README.md
- Beluganos-introduction.pdf
- Presentation to introduce Beluganos
- CONTRIBUTING.md
- architecture.md
- Abstraction of Beluganos's architecture
- function.md
- Function matrix of Beluganos