Skip to content

Latest commit

 

History

History
executable file
·
90 lines (60 loc) · 2.73 KB

install-guide.md

File metadata and controls

executable file
·
90 lines (60 loc) · 2.73 KB
Raw

Install guide

Pre-requirements

1. Install beluganos-netconf

$ git clone https://github.com/beluganos/netconf && cd netconf

Set internet proxy

For proxy environments only: if you need use proxy server to connect internet, please comment out and edit PROXY settings in create.ini.

$ vi create.ini

PROXY=http://192.168.1.100:8080

Change netopeer2/sysrepo build options

Changing building option of netopeer2/sysrepo is recommended. If you did not change this settings, you cannot use systemctl commands to start netopeer2/sysrepo.

$ vi etc/sysrepo/sr_install.sh

CMAKE_BUILD="-DCMAKE_BUILD_TYPE=Debug"
# CMAKE_BUILD="-DCMAKE_BUILD_TYPE=Release"

Build

$ ./create.sh

2. Register as a service

$ sudo make install-service

3. Install LXD containers

If you want to configure Linux's base settings by NETCONF, following steps are required.

In this software, "network-instance" means "linux container (LXD)". This means that if you execute the request to create a "network-instance", a "linux container (LXD)" will be created. This new LXD instance is a just copy of "base" image. Thus, you should create "base" image before issue NETCONF commands.

Current support status

  • OS: Ubuntu 18.04
  • ARCH: x86_64

Create "base" image

$ lxc launch ubuntu:18.04 temp
$ lxc stop temp
$ lxc publish temp --alias base
$ lxc delete temp
$ lxc image list
+--------------+--------------+--------+---------------+--------+----------+---------------+
|    ALIAS     | FINGERPRINT  | PUBLIC |  DESCRIPTION  |  ARCH  |   SIZE   |  UPLOAD DATE  |
+--------------+--------------+--------+---------------+--------+----------+---------------+
| base         | 01234567890  | no     |  foo bar      | x86_64 | ---.--MB | -- / -- / --  |
+--------------+--------------+--------+---------------+--------+----------+---------------+

GoBGP/FRR

If you need to configure GoBGP/FRR, you should setup this software before starting netopeer2/sysrepo. Please note that when network-instance is added/deleted by NETCONF, GoBGP/FRR settings will be changed.

You have two options for installation:

  1. Installation to "base" container in advance
    • The network-instance will be created based one "base" container.
  2. Use lxcinit.sh
    • Once network-instance is created, lxcinit.sh will be worked. You can customize this script. For more detail, please refer setup-guide.md.

Next steps

Please refer setup-guide.md.